Guests are not getting IP & webpage

Guests are not getting IP & webpage.
I have a 4400 ( 6.0.199.4 ) WLC configured with a guest wlan using web authentication & DHCP is configured on ASA . & ADSL line is connected to ASA ( for internet)...this was working , from last 2 days it is not working. guest users are not to get the IP address & login web page. Error message is Limitted connectivty.
My observation.
ADSL linterent connetion is working fine & from ASA to switch connection is fine & VLAN is also up.
from WLAN end, all parameter are looks good, nothing changed.

please see the log, which I took from WCS ..it look WLC is receving request from client ...i think it is not getting responce from DHCP ...
it make sence ?
ime :11/24/2011 13:27:11 CET Severity :INFO Controller IP :10.45.235.4 Message :Dhcp Information. processing DHCP DISCOVER (1)
Time :11/24/2011 13:27:11 CET Severity :INFO Controller IP :10.45.235.4 Message :Dhcp Information.   op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 0
Time :11/24/2011 13:27:11 CET Severity :INFO Controller IP :10.45.235.4 Message :Dhcp Information.   xid: 0x41839660 (1099142752), secs: 5247, flags: 0
Time :11/24/2011 13:27:11 CET Severity :INFO Controller IP :10.45.235.4 Message :Dhcp Information.   chaddr: d8:2a:7e:d2:d9:92
Time :11/24/2011 13:27:11 CET Severity :INFO Controller IP :10.45.235.4 Message :Dhcp Information.   ciaddr: 0.0.0.0, yiaddr: 0.0.0.0
Time :11/24/2011 13:27:11 CET Severity :INFO Controller IP :10.45.235.4 Message :Dhcp Information.   siaddr: 0.0.0.0, giaddr: 0.0.0.0
Time :11/24/2011 13:27:15 CET Severity :INFO Controller IP :10.45.235.4 Message :Dhcp Information. processing DHCP DISCOVER (1)
Time :11/24/2011 13:27:15 CET Severity :INFO Controller IP :10.45.235.4 Message :Dhcp Information.   op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 0
Time :11/24/2011 13:27:15 CET Severity :INFO Controller IP :10.45.235.4 Message :Dhcp Information.   xid: 0xd4b2de62 (3568492130), secs: 5251, flags: 0
Time :11/24/2011 13:27:15 CET Severity :INFO Controller IP :10.45.235.4 Message :Dhcp Information.   chaddr: d8:2a:7e:d2:d9:92
Time :11/24/2011 13:27:15 CET Severity :INFO Controller IP :10.45.235.4 Message :Dhcp Information.   ciaddr: 0.0.0.0, yiaddr: 0.0.0.0
Time :11/24/2011 13:27:15 CET Severity :INFO Controller IP :10.45.235.4 Message :Dhcp Information.   siaddr: 0.0.0.0, giaddr: 0.0.0.0
Time :11/24/2011 13:27:17 CET Severity :INFO Controller IP :10.45.235.4 Message :Dhcp Information. processing DHCP DISCOVER (1)

Similar Messages

HR iViews are not getting displayed and showing "Page can not be found".

Hello,
I am facing an issue in the EP 7 wherein all the standard HR iViews are not getting displayed and showing "Page can not be found".
We have added S_SERVICE autorisation object to user used for the relative JCO as well by looking at other similar forums but that did not help.
I have attached last part of log from file application.log under "F:\usr\sap\EP1\JC01\j2ee\cluster\server0\log"
#0002A537D2A6006A0000027300001C4C00046E3590936E5F#1247076244733#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12374##n/a##b7291b106be911de8d8a0002a537d2a6#SAPEngine_Application_Thread[impl:3]_27##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A6007A0000001200001C4C00046E35AAA74D33#1247076682222#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A6005F0000026C00001C4C00046E35C2814813#1247077082383#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#SKhatkale#12460##n/a##a7cb51e06beb11de8bd70002a537d2a6#SAPEngine_Application_Thread[impl:3]_6##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A60075000002BD00001C4C00046E35C3AD4359#1247077102039#/Applications/Xss#sap.com/tcwddispwda#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#SKhatkale#12464##rrisep1p01_EP1_14481150#SKhatkale#b6d348006beb11deb9780002a537d2a6#SAPEngine_Application_Thread[impl:3]_31##0#0#Fatal#1#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#Plain###You do not have the authorization to start service sap.com/pcui_gp~xssutils/XssMenu.#
#1.5 #0002A537D2A6007A0000001300001C4C00046E35DDE07029#1247077541575#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A600650000024600001C4C00046E36B6DBE4D0#1247081181950#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12873##n/a##37e186606bf511de8bf20002a537d2a6#SAPEngine_Application_Thread[impl:3]_0##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
Please let me know if anybody has come across such scenario before.
Thanks
Suhas
Edited by: Suhas Khatkale on Jul 8, 2009 10:09 PM

Hi,
This issue is now resolved. We followed up with SAP and they suggested to update the component EP-PSERV to latest patch which was earlier to patch 1. Later on we upgraded it to patch 4 and this resolved the issue.
Thanks
Suhas

Guest users not getting IP address

I am setting up Cisco wireless along with ISE 1.3 for guest wireless. The client is going to use the self-registration portal for guest wireless users. I followed this Cisco doc to configure the self-registration portal:
http://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/118742-configure-ise-00.html
I tested this in my home lab and everything works fine. However, at the client users are not getting IP addresses from the DHCP server. This is the same DHCP server that is used for corporate wireless and if you connect that SSID, you get an IP address. I have looked what I configured at home and the client and everything looks the same. In the back of my mind, I feel something is missing, but I can't figure out what it is.
Edit: Not sure if this makes a difference or not, but they are using a Nexus 5K for their core switch and it hosts the SVI for this network.
Let me know what information you need and I will post it.
TIA,
Dan

Hello,
Some verifications below :
Did you verify if DHCP Proxy is enabled in wlc's wlan interface ? Case DHCP proxy is disabled, did you verify if the ip helper address is enabled in Nexus SVI ?
DHCP Scope is enabled in the DHCP Server or is enabled in the WLC ?
Verify if Trunk in the switch is enabled correctly passing all VLANs to WLANs ?
Verify if ACL to redirect configured in the WLC is allowing DHCP Server and DHCP Client to client receive IP Address and ports 8443 to Cisco ISE and DNS to resolve some address and get access to ISE Portal ?
The scenario is Local Switching or Central Switching ?
Regards

Guest OS not getting IP adderss from DHCP

We have installed Windows Server 2008 R2 with Hyper V role installed on IBM x3650 M4 server. We have connected 2 LAN. When we create External Virtual Network & binds one physical adapter in Virtual Network manager, We loose the ping response from Local
network for that physical adaptor. Even if we create new VM (Guest OS) & we are not getting any IP from DHCP to that VM. Kindly help to resolve it.

"Please reply fast we have to set up the server as soon as possible."
This is not a support hot-line. TechNet forums are volunteer driven, meaning that when a person has a few minutes of time, they will look to see if they can help someone.
"We loose the ping response from Local network for that physical adaptor"
That is expected. In fact, when you select a physical NIC in Hyper-V to make it into a virtual switch, you are presented with a warning stating that might happen. What happens when a physical NIC is assigned to a virtual switch is that all the
existing networking protocols that were associated with that NIC are removed and the Microsoft Virtual Switch protocol is bound to the NIC. That is the only protocol than can be on that NIC if you wish to use it as a virtual switch. If you want
the Host to continue using that NIC you need to select the option to share the connection with the host.
"Even if we create new VM (Guest OS) & we are not getting any IP from DHCP to that VM."
Are you using VLANs? What is the network environment? Subnets, etc.
. : | : . : | : . tim

Portal Forms are not getting displayed in the new oracle environment.

Hi All,
The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
Regards,
Tom

Hi ,
Based on the requirement , check whether the customer contact has been done carried out for the invoice , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection .

Whenever a record is Edited the rows are not getting displayed in the repor

Hi all,
When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
Please Any body faced this situation...
Help me to identify what error i am doing........
thanks in advance
kavitha L

Hi KChamarti,
I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
My item renderer is:
          <mx:DataGridColumn headerText="Type">
               <mx:itemRenderer>
                 <mx:Component>
                  <mx:HBox verticalGap="2">
                      <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                      <mx:Label text="{data.type}"/>
                    </mx:HBox>
                 </mx:Component>
               </mx:itemRenderer>
            </mx:DataGridColumn>
Am i mentioning the source of the image in the right way?

While Creation Of SaleOrder Char Values are not getting saved.(V C)

Hi SAP gurus,
One of my client can able to create a saleorder but when we go and see in VA03 Display mode,we found Charactrestic values getting miised out.What could be the probale reasons.
Note: I Have stimulate the required combination as per my client requirement in CU50,here i can able to indentify the Green Sign,but While Creation Of SaleOrder Char Values are not getting saved.
Awaiting for your valuable reply.
Cheers,
Kumar.S

Kumar ,
If you assign values in classification view or configuration profile they will become default for the product, and it willnot be changed in sales order.
another thing if the item category is incorrect you will not get the configuration pop up at all .
problem what i understand from your thred is at the time of sales ordeer creation there is some inconsistances in the configuration , may be some condition is not fullfilling.
If in CU50 the result shown are error free, same configuration should owrk properly in sales configuration process, please again try to create it in sales order with same value assignment also check all the messages.
see the result of configuration before saving the sales order , i hoep it will work for you.
I am assuming all the things from SD are properly configured ie item catageory, varient pricing etc.
Check and revert back.
Regards
Ritesh

Images for tabs are not getting displayed in the page if Iam using a template

I have page with a unstructured template. I have arranged tabs on page with images attached. But images are not getting displayed. why

Hi,
Please check if the images are in the server and in the /images alias path.
thanks,
Sharmila

Reg:tasks are not getting displayed in the uwl mss for particular user

hi all
Tasks are not getting updated in the MSS under tasks tab for particular user in EP.can any one please share their exp and knowledge on this how to reslove it.
Thanks in advance.
Deepika

Hi Sateesh,
This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
Kai

The agents are not getting determined

Hi Gurus,
In the standard workflow WS00300022 with BUS 2104 for Approval of Appropriate request, the agents are not getting determined.
Below are the steps followed:
We have created a subtype for BUS 2104 and redefined the display and edit to add some new functionality. Delegated the business object and followed all the standard steps. Now the present situation is that the Workflow is not able to determine agents.
We have even removed the subtype and checked with the standard functionality but still it is not determining the agents.

Hi,
Kindly Diagnose your WF:-
Use the following transaction:-
1> SWE4/SWELS -> EVENT TRACE ON/OFF (Switch On the Event Trace)
2> SWEL -> DISPLAY EVENT TRACE
3> SWUD -> WF DIAGNOSTICS
4> SWPR -> WORKFLOW RESTART AFTER ERROR
Enter the WF Number and Click on the LOG Icon.
There you can see the Graphical Log of the WF to know where the WF is stuck.
And You can also check the Technical Details of the WF there, to find which WF Container has what value.
In the LOG, you can determine the step where it is unable to determine the Agent. That will give a picture of how to proceed further and what is the WF status at that point.
Kindly check and revert back, so that a solution can be provided.
Regards,
Kanika

Images from KM are not getting displayed in EP

Hi All,
I am using EP7.0 SP11.When I run the portal, the images are not getting displayed. When I right click on the * mark and click on Show picture, then also its not appearing.
Location of the Images that I received from EP is mentioned below.
http://hostname:port no./irj/go/km/docs/documents/HP_Images/Image_123.jpg
Images are available in the location in the below mentioned path as .jpg files:-
http://hostname:port no./irj/go/km/documents/HP_Images/Image_123.jpg
Difference in both is a DOCS folder missing in between........
Is this is the reason for the image not getting displayed?
Anything more has to be done in KM part to display these images?
May I know how to solve this issue??
Regards,
Athulya

Hi,
the right path look like this: /irj/go/km/docs/<path_to_document>.
You may have to check you URL generator service settings. Here:
Configuration - Content Management - Global Services - URL Generator Service(advanced section)
and then have a look for example for the following values "Content Access Path:" and "Viewer:" normally they both have same value "/irj/go/km/docs".
Hope that will help.
best regards,
--epexpert

How come the images are not getting displayed in ie?

Hi,
In my application i have a page where the thumbnails
representing the videos uploaded into the site should be
displayed.These imgaes are getting displayed in mozilla properly,
but when it comes to ie 7 they are not getting displayed..instead
iam getting a broken image.Please suggest me a solution.Thanks in
advance.

Hi KChamarti,
I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
My item renderer is:
          <mx:DataGridColumn headerText="Type">
               <mx:itemRenderer>
                 <mx:Component>
                  <mx:HBox verticalGap="2">
                      <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                      <mx:Label text="{data.type}"/>
                    </mx:HBox>
                 </mx:Component>
               </mx:itemRenderer>
            </mx:DataGridColumn>
Am i mentioning the source of the image in the right way?

All Cells are Not getting Background Color in WAD

Hello All,
I have a query with 29 Columns and Nearly 1000 Rows.
This query is being displayed through WAD.
I have used com.sap.ip.bi.rig.Format to color different columns : e.g.
1st - 8th column -> Color Green
9th - 10th -> Color Red etc.
Also, in the Analysis Web Item properties, the values are:
BLOCK_COLUMN_SIZE = 50
BLOCK_COLUMNS_STEP_SIZE = 1
BLOCK_ROWS_SIZE = 1000
BLOCK_ROWS_STEP_SIZE = 0
My Issue: For all columns , a few of the Cells are not getting colured. They are absolutely random.
When I reduce the data volume (restrict to some region), all the columns are properly colured.
Please Help to fix the issue.
Thanks,
Mainak

Closing the thread as seems below note answers my query:
1648692 Modification Format styles not applied on huge result set
Thanks,
Mainak

Stock transfer PRs are not getting created in APO

Hi,
I have a plant-to-plant transfer is configured using special procurement type. When APO creates stock.PRs , it does not provide any numbers to PRs and they are not getting trasnfered to R3. CIF model for PIR & POs are running good.
In CIF post processing these PRs as stuck and I see " Vendor master data does not exist for plant A" . There is vendor master data created for plant A in R3 and material info record also exists.
How to de-bug this post processing queue to see what is missing in vendor master data?
regards,
shan

Hi
Can you explain in detail your scenario..you say plant A so I suppose there is plant named B in your scenario. which one is the source location and which one destination location?
In Stock transfer from plant to plant scenario, key is to have correct settings for the system to do source determination.
Assuming plant A as destination and plant B as source. First, The material should be maintained at both the plants.
You need to have a purchasing info record(ME11) linking your material and the source plant B.
I assume you are using external procurement type in your material master. Special procurement type 40 (stock transfer)should be maintained in material master.
Then the system creates a STReq and PurReq using the source plant B. For the system to do this source determination should happen. To verify that..you can check the following...
When you transfer the purchasing info record, system automatically generates the external procurement relationships with source location as plant B, destination location as plant A and info record reference.
When you transfer material master data, the system auto'lly generates transportation lanes between plant A and plant B. (keep in mind transportation lanes should be manually created here)
So in essence you have to check if all the above things are done by the system.
Hope Im clear in this
regards
Mohan V R Chunchu

QS41_Code are not getting displayed

Dear Experts,
Scenario is,
1.     T-Code QS41
2.     Under code groups (of any catalogue) certain codes have been created.
3.     The same entries can be viewed through tables QPCT and QPCD.
4.     Unfortunately we could not see the codes in transaction code QS41, QS42 and QS43.
5.     We checked for authorization related object. But in spite of full authorization codes are not getting displayed.
6.     The message that we got is No entries found that match selection criteria Message no. SV004
Few more inputs,
u2022     Recently patch SPKE500053 for HCM module has been updated in system. Earlier level was SPKE500043.
u2022     Patch SAPKB64021 was updated for BASIS / BW/ ABAP. Earlier level was SAPKB64020.
We are worried that because of these patch upload are we facing this issue? Or else kindly let us know if another solution can be applied
Best Regards,
Anand Rao

Hello Anand
I think that is the sap note to be implemented. i had also come across same issue but do not remember the OSS note number
please look into the below link also for reference
Link: [http://www.sapfans.com/forums/viewtopic.php?f=7&t=316640]
Regards
Gajesh

Guests are not getting IP & webpage

Similar Messages

Maybe you are looking for