GUI admin of IPS

hi
I am not able to successfully start gui admin console on my MS IE browser 6.0.2. It gives me error that "Your browser does not have the required Java Plug-in. IDM requires Java Plug-in version 1.4.2 or higher. You can download the Plug-in from http://java.sun.com/j2se/1.4/download.html"
...i did ensured that i have installed this plug-ins.. Any tricks??
- on different desktop, it just shuts down my browser after i submits the login name and pwd.
Please help. Thanks.
regards
RAkesh
=====

Make sure you don't have multiple Java Runtime versions enabled in the browser. In the browser go to Tools>Internet Options>Advanced and ensure that only one Java is enabled (MS Java or Sun JRE).
Having multiple jvm's enabled will surely cause wacky browser behavior.
Tom S

Similar Messages

GUI Admin console not launching and fixed

Hello,
I spent some time on this might help someone...
I installed the Sun Java System application 8, everything worked (app server, pointbase, deploytool) except the gui admin console (localhost:4848). It would not launch. It <blinked>blinked</blinked>. Really - the tab text blinked on firefox. So I ...
1. checked PATH and JAVA_HOME to be correct.
2. rebooted
2. reinstalled appserver
3. rebooted
4. tried firefox & microsoft ie
To no avail.
I then turned off my firewall. It worked. It might for you too.
ciao,
-rob

Hi Andy,
I am not sure why you are unable to see the users and groups through the
console., you should be able to. Can you post the config.xml?
thanks,
-satya
Andy Levy <[email protected]> wrote in message
news:3b700c36$[email protected]..
>
We're running WLS 6.0 Sp2 on Windows 2000 Professional.
"Satya Ghattu" <[email protected]> wrote:
Andy,
Could you please tell us what Version of Weblogic you are running?
thanks,
-satya
Andy Levy <[email protected]> wrote in message
news:[email protected]..
We created a new Realm in WebLogic, which specifies the location ofthe
Netscape
LDAP server. Our Weblogic application, called TGSLC, is able to findthe
ldap
server to use for authentication. My problem is this- the Admin
Console
is not
displaying the new users and groups from the LDAP server. Shouldn'tthe
WebLogic
Admin Console display any users and groups specified in the ldap
server,
which
is referenced in the customized Realm?

Simple GUI admin tools?

Hello,
I am trying to customize arch linux for a windows user, who does not know linux, but want to use it And all this is on an old Pentium 600MHz with 128MB RAM, so I am looking for light solutions.
So I have installed icewm with XP theme, rox, xfe and idesk, which basically resemble WindowsXP.
But now I am searching for simple GUI admin tools to manage users (add new user, change password). I would prefer the "unix way" - one simple tool for one task, instead of one Swiss-army-knife app. The only two tools I found are linuxconf/gnome-linuxconf (which unfortunately is not developed anymore) and webmin/usermin (which needs a webserver, and is way too complicated). Do you know any useful tools like this? Do you have any other recommendations? For example, I could not find simple and not terminal-only mixer, and there is no mixer tray for icewm, so I had to use aumix-gtk ang gnome-alsamixer (both of which are too complicated).
Do you know similar projects? Or if other (possibly "mini") distros use some light and not distro-specific tools? Please share your recommendations.
Regards,
miko

all arch has is webmin and usermin really and yes they aren't super easy to use... I agree it would be handy to have something basic in arch like that. Just doesn't exist as far as I know.

After having Alterd attributes from Objects duplicates appeard in gui admin

Hello,
A small question.
After having Altered attributes from Objects, duplicates appeard in HTML gui admin.
I know that when I alter Object from Terminal I've to disconnect and reconnect in order to be able to run a describe to see the changes made.
But the admin GUI html ->Objects->navigate-> type shows duplicates of the same object into its list of types.
What is the meaning of those duplicates stuffs ?
Thanks for all.
Claude.

Thank for you answer.
More details then:
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
The phenomenon appears either on XP pro and UBUNTU
DESCRIPTION----------------------
1] I create a simple object: OK
CREATE OR REPLACE TYPE O1 AS OBJECT (
id NUMBER,
name VARCHAR2(30)
2] After that I decide to modify it->
alter type O1 add attribute(weight NUMBER); OK
3] And suddenly 'O1' appears two times my Object Browser HTML page
(like: http://beginningoracle.files.wordpress.com/2008/04/ishot-17.jpg , except that it is 'TYPE' list and not 'TABLE' list I'm talking about)
Both objects having completely the same values and names. Why?
4] If I continue to modify 'O1' the duplication continues too.
5] If I decide to drop the 'O1' TYPE all the duplicates are dropped in the same time.
My question: How to avoid such unnecessary duplications?
Thank you for all suggestions.
Claude Siefers

Oracle GUI Admin Tools

Dear,
Any good GUI tools (third party) for oracle 9i or 10g to do the DBA job? delete delete data...replucation....DR....create table....etc
ManyThanks

EM is the most complete DBA tools for oracle databases but if you need 3rd party then you may look at http://www.toadsoft.com/
Also you may look at sql developer which is almost a complete dba tools from oracle.
it is available for free at : http://www.oracle.com/technology/products/database/sql_developer/index.html

GUI Tools in solaris 8

Dear Sir
I want to know that have GUI admin tools in solaris 8 ? For example add use, admin, disk managerment
Thanks
John

Hi
I cn't this b'coz customer didn't able to give the solution this one whether it is working fine or not from very first time
this eeprom output
keyboard-click?=false
keymap: data not available.
ttyb-rts-dtr-off=false
ttyb-ignore-cd=true
ttya-rts-dtr-off=false
ttya-ignore-cd=true
ttyb-mode=9600,8,n,1,-
ttya-mode=9600,8,n,1,-
pcia-probe-list=1,2
pcib-probe-list=1,3,2,4,5
enclosure-type=540-4284
banner-name=Sun Enterprise 220R
energystar-enabled?=false
mfg-mode=off
diag-level=min
#power-cycles=72
system-board-serial#=5015606185164
system-board-date=3d202135
fcode-debug?=false
output-device=screen
input-device=keyboard
load-base=16384
boot-command=boot
auto-boot?=true
watchdog-reboot?=false
diag-file: data not available.
diag-device=net
boot-file: data not available.
boot-device=disk:a disk net
local-mac-address?=false
ansi-terminal?=true
screen-#columns=80
screen-#rows=34
silent-mode?=false
use-nvramrc?=false
nvramrc: data not available.
security-mode=none
security-password: data not available.
security-#badlogins=0
oem-logo: data not available.
oem-logo?=false
oem-banner: data not available.
oem-banner?=false
hardware-revision: data not available.
last-hardware-update: data not available.
diag-switch?=false
yes keyboard and mouse are connected directly to server as well as they SUN keyboard & mouse
With Regards

Cisco ISE CLI and GUI password expire

I had Cisco ISE version 1.1 i face a problem with the CLI and GUI password, as it expire and i can't login, i do the password reset using the ISE DVD,
i navigate to the ISE CLI, and do the following commands:
conf t
     password-policy
          no password-expiration-enable
and reset the GUI admin password, using the command:
     # application reset-passwd ise admin
from the ISE GUI i had remove the option for diable admin account after 45 days.
but after 60 days the password expire again.
so kindly advise what to check for this expire issue.

Hi Mostafa,
Yes, the last reply was more towards GUI password-mgmt because in maority of cases it happens with UI admin account. I need to know if you've restarted the ISE after disabling the expiration from the CLI because what I read few weeks ago in an internal defect that password policy configurations are not preserved on cli after restart so just to check could you please check the current settings on CLI w/ the help of show run | in password-policy.
~BR
Jatin Katyal
**Do rate helpful posts**

5585X-IPS SSM40 Event alert

Hello,
ASA Firewall is running in Active/Active mode. Below is the configuration of the firewall and IPS SSM module.
We are not getting event on IPS sensor when we type "show event alerts".
IPS configuration:
++++++++++++++++++++++
IPS1#
IPS1# sh configuration
! Current configuration last modified Tue Jul 02 07:19:13 2013
! Version 7.1(1)
! Host:
! Realm Keys key1.0
! Signature Definition:
! Signature Update S552.0 2011-03-07
service interface
exit
service authentication
exit
service event-action-rules rules0
exit
service host
network-settings
host-ip 10.15.1.58/28,10.15.1.57
host-name IPS1
telnet-option disabled
access-list 0.0.0.0/0
dns-primary-server disabled
dns-secondary-server disabled
dns-tertiary-server disabled
exit
time-zone-settings
offset 60
standard-time-zone-name GMT+03:00
exit
exit
service logger
exit
service network-access
exit
service notification
exit
service signature-definition sig0
exit
service ssh-known-hosts
exit
service trusted-certificates
exit
service web-server
exit
service anomaly-detection ad0
exit
service external-product-interface
exit
service health-monitor
exit
service global-correlation
exit
service analysis-engine
virtual-sensor vs1
description virtual-sensor-1
anomaly-detection
operational-mode learn
exit
physical-interface PortChannel0/0
exit
exit
IPS1#
ASA in system mode
+++++++++++++++++++++++++++++++++++++++
ASA-1/act/pri# sh run
: Saved
ASA Version 9.1(1) <system>
hostname ASA-1
enable password u14FkAnxI.kNNH7a encrypted
no mac-address auto
interface GigabitEthernet0/0
description LAN Failover Interface
interface GigabitEthernet0/1
description STATE Failover Interface
interface GigabitEthernet0/2
interface GigabitEthernet0/3
interface GigabitEthernet0/4
shutdown
interface GigabitEthernet0/5
shutdown
interface Management0/0
interface Management0/1
interface TenGigabitEthernet0/6
channel-group 20 mode active
interface TenGigabitEthernet0/7
channel-group 20 mode active
interface TenGigabitEthernet0/8
channel-group 10 mode active
interface TenGigabitEthernet0/9
channel-group 10 mode active
interface GigabitEthernet1/0
shutdown
interface GigabitEthernet1/1
shutdown
interface GigabitEthernet1/2
shutdown
interface GigabitEthernet1/3
shutdown
interface GigabitEthernet1/4
shutdown
interface GigabitEthernet1/5
shutdown
interface TenGigabitEthernet1/6
shutdown
interface TenGigabitEthernet1/7
shutdown
interface TenGigabitEthernet1/8
shutdown
interface TenGigabitEthernet1/9
shutdown
interface Port-channel10
interface Port-channel10.96
description "Inside-CTX-1"
vlan 96
interface Port-channel10.97
description "Inside-CTX-2"
vlan 97
interface Port-channel20
interface Port-channel20.98
description "Outside-CTX-1"
vlan 98
interface Port-channel20.99
description "Outside-CTX-2"
vlan 99
class default
limit-resource All 0
limit-resource Mac-addresses 65535
limit-resource ASDM 5
limit-resource SSH 5
limit-resource Telnet 5
boot system disk0:/asa911-smp-k8.bin
ftp mode passive
pager lines 24
failover
failover lan unit primary
failover lan interface FOL GigabitEthernet0/0
failover link STATEFULL-LINK GigabitEthernet0/1
failover interface ip FOL 10.15.1.33 255.255.255.252 standby 10.15.1.34
failover interface ip STATEFULL-LINK 10.15.1.37 255.255.255.252 standby 10.15.1.38
failover group 1
preempt
failover group 2
secondary
preempt
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
console timeout 0
tls-proxy maximum-session 1000
admin-context admin
context admin
allocate-ips vs0 adminvs0
config-url disk0:/admin.cfg
context arm-1
description ARM-1
allocate-interface Management0/0 MGT
allocate-interface Port-channel10.96 inside
allocate-interface Port-channel20.98 outside
allocate-ips vs1 arm-1vs1
config-url disk0:/arm-1_Context.cfg
join-failover-group 1
context arm-2
description ARM-2
allocate-interface Management0/1 MGT
allocate-interface Port-channel10.97 inside
allocate-interface Port-channel20.99 outside
allocate-ips vs1 arm-2vs1
config-url disk0:/arm-2_Context.cfg
join-failover-group 2
prompt hostname context state priority
no call-home reporting anonymous
Cryptochecksum:ad532251aad3ca65f6da8f1ff0762816
ASA in one arm context mode
+++++++++++++++++++++++++++++++++++++++
ASA-1/arm-1/act/pri# sh run
: Saved
ASA Version 9.1(1) <context>
firewall transparent
hostname arm-1
enable password u14FkAnxI.kNNH7a encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface BVI1
ip address 10.15.1.57 255.255.255.240
interface MGT
management-only
nameif management
security-level 0
ip address 10.14.1.9 255.255.255.0 standby 10.14.1.10
interface inside
nameif inside
bridge-group 1
security-level 100
interface outside
nameif outside
bridge-group 1
security-level 0
access-list global extended permit ip any any
access-list out extended permit ip any any
access-list in extended permit ip any any
pager lines 24
logging enable
logging asdm informational
mtu management 1500
mtu inside 1500
mtu outside 1500
monitor-interface inside
monitor-interface outside
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
access-group in in interface inside
access-group out in interface outside
route inside 10.0.0.0 255.255.0.0 10.15.1.51 1
route inside 10.0.10.45 255.255.255.255 10.15.1.51 1
route outside 10.11.0.0 255.255.0.0 10.15.1.53 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http 0.0.0.0 0.0.0.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
crypto ipsec security-association pmtu-aging infinite
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 inside
ssh 0.0.0.0 0.0.0.0 outside
ssh timeout 30
no threat-detection statistics tcp-intercept
username admin password fMQ/rjnxl9Vwe9mv encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
class-map any
match access-list global
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map IPS
class any
ips promiscuous fail-open sensor arm-1vs1
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
service-policy IPS interface outside
Cryptochecksum:00b87b7c25f21d91cf5b90cb18c4d745
: end
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
Why we are not able to see any event on IPS. As MPF is configured on ASA and that ACL is gettin hit count?
Regards,

In the CLI enter the following command to see if any signatures are triggering, it could just be that you haven't had the right combination of signatures trigger to cause an actual event:
show stat virtual-sensor | begin Per-Signature
You could also enable Signature 2000 and that will usually generate events in a short time to ensure you have traffic configured correctly for inspection by the IDS.

How to manage J2EE Container with GUI?

I have used Oracle9i J2EE Container for 6 months. I have managed via command-line (on Win2000). It's not convenient for admin the server. I searched for the documents about manage with GUI, admin tool or Enterprise Manager but I found a few document on Oracle website that didn't help me too much.
Does anybody suggest me about any admin tool or how to use + configure Enterprise Manager or where to find rich documents?
Thank you so much

Narong,
Enterprise Manager is available with Oracle9iAS Release 2 and OC4J is a managed component withiin Oracle9iAS. You have to download Oracle9iAS Release 2 from OTN(may be just J2EE Webcache edition) if you want to use the GUI tool.
You can use the following link to download Oracle9iAS Release2 http://otn.oracle.com/software/htdocs/devlic.html?/software/products/ias/htdocs/winsoft.html
regards
Debu Panda
Oracle

LMS4.2 admin username cannot login

Hi,
I have installed LMS4.2.2 on Windows 2008 server and am unable to login via the 'admin' username. I get "Invalid Username or Password. Please try again" error message. I can successfully login using Windows AD username and password.
I have reset the password for 'admin' username with the following:
nmsroot\bin\perl.exe resetpasswd.pl admin
Server has been rebooted PRE and POST password reset. What else can/should I do?
Thanks,
Vineet

Hi Vineet,
I was facing similar issue, I was installing the same on VM... This is what i did to resolve the same
I re-installed the LM4.2 this time i did not change the default sysadmin name gave a password then gave a different password for GUI admin which is prompted after sysadmin. Once the installation was complted used the username 'admin'(this is the default GUI username) and the password given for GUI admin for log-in.
http://x.x.x.x:1741.
Hope this helps !
Regards,
Vinu

Display the power supply status in the IPS 4270

How to display the status of the power supply on the IPS 4270
since the IPS has two power supplies and one has failed, so i want to check what is causing this failure (i am looking for a message from the CLI describing that the IPS power were failed).

At this time, there is no method to display the status of the power supply from the CLI or IDM GUI of the IPS-4270. There is an open enhancement request to have this capability added in a future release of the IPS software.
Scott

CS-Mars Update Problem

Good Day Everyone,
I got the CS-MARS IPS-SIG Ver 577 from the cisco Site, I started thoe update around 24 Hours ago and as of now when i click on "Update Now" it gives me an error saying " System is already in the Process of downloading and upgrading the package, Please try again Later". I can't really figure out the Problem.The CSMARS version is 6.1.1.
Thank you

Is this a standalone CS-MARS LC (Local Controller) appliance or is it configured with a GC (Global Controller)?
If you clear your web browser cache, then navigate to CS-MARS GUI > ADMIN > System Setup > IPS Signature Dynamic Update Settings page, what is shown for the Last Updated Time and Version: and Status: values?

The Long Road to building a 10.3 Server... could use Tips!

I recently acquired a copy of 10.3 Server (legal, new in package...) Unlimited license.
Quick background on my environment;
I'm the school computer guy for a K-8 school, and do the same job for another school a few hours a week.
Been working with Macs for 15 years... a fair amount of general experience with OS X, but very little with the Unix innards.
Here at my "main" school we have an old AppleShare 6.3 Server, Doing file serving only.
20 or so teachers and admin users, one "everyone" type account for Students (separate sharepoint for the student folders).
Client machines here are about 140 Macs (from iMac G3 to eMac G4 mostly), and 3 PC's with WinXP. All Macs are runnning 10.3.7 to 10.3.9.
I'm faced with wanting to "build" a new server (hardware and software) from leftover parts. The only budget for this project will be out of my own pocket (and they don't pay me real good). This is 98% for my own education and experience.. and 2% to move the school into the 21st century.
I have a G4 Gigabit Ethernet model, two Seagate 300Gb HD's, assorted RAM and smaller HD's to play with, and precious little else (I kinda finagled the 300Gb HD's by adding them to an order...). Figuring on making one the "primary" drive and the other a periodic backup (also considering a mirror-RAID, haven't decided).
I could use some tips...
How difficult, on a scale of 1 to 10, is setting up the following services in 10.3 Server;
Basic File Serving (my first goal...)
A NetBoot image/images? (my second goal...)
Other internet, web, and printing services are lower on my priority list.. ones I'll delve into later.
Server Hosted Home Folders/User Accounts (Intrigued by the idea, no idea if I'd use it).
Our internet service and DNS service is provided by our county office of Edu through a router and T1 line to the County Schools WAN. Firewall and security is handled by them. (not that I don't want to learn more than I know... but it's NOT a priority).
Naturally, I'll start by reading the documentation... but I'd appreciate any tips on OTHER reading material, or practical pitfalls if anyone has dealt with a simillar environment (and I know I may have left out details...).
Some direction is appreciated!
Paul F.

The hardware you have is certainly up to the task, so that's a good start.
After the basic install, setting up basic file sharing is no harder than a few mouse clicks - open Workgroup Manager, select 'Sharing', choose a folder to share, and define which protocols to share it via (AFP, NFS, SMB, FTP), and you're mostly done.
However, there's more to it than that, especially in a school environment. You'll need to consider user accounts (I'm guessing you don't want every file to be accessible to every user, including students), so you need to setup accounts, usernames, passwords, etc.
Now if your school already has a directory server of some description you may be able to integrate this server into that directory. If not you'll need to setup a series of accounts for the various users.
As for the other elements, NetBoot is a little trickier (OK, a lot trickier). You need to create an image (or series of images) for the different machines you'll be booting. It's not that hard to do, but it is time consuming.
The web serving and printer serving parts are pretty straightforward, too - a few clicks in Server Admin for each of them (other than creating the web content, of course).
The whole network home directory question can't be answered without knowing more about your directory. If there's an external directory already running in your network it's unlikely that you'll be able to use network home directories since you'll need to edit the directory in order to configure the home directory, and it doesn't sound like you have the keys to that.
If there isn't an existing directory and you're creating one on this machine then it's not a big problem. You'll define a directory on the server as being a valid home directory root, then as you create the user accounts you simply identify the share point where their home directory is located - the rest is automatic.
So none of what's on your list is a big problem. You haven't yet ventured out past the GUI admin tools that Apple supplies, and that's where it starts to get hairy.

Create a new domain in wlserver6.1

Hi,
I have weblogic 6.1 installed on my pc. i have created couple of ejbs and i run them
from the mydomain domain they work fine.
i want to create a new domain and make it up and running. i have got a documentation
from bea which says details for create a domain using the gui/admin console.
i tried that it creates a domain and adds a directory in the config directory of
bea/wlserver6.1. but when i try to run the domain alone it doesnt work.
can anyone give me some documentation for creating a new domain
thanks in advance
regards
kamal

Make your domain and server names different - currently they are both
named 'kamal' and WLS doesn't like it. Error message is a bit cryptic.
kamal gupta <[email protected]> wrote:
I have created a new domain with name kamal and it gives me this error
The WebLogic Server did not start up properly.
Exception raised:
weblogic.management.configuration.ConfigurationException: invalid value kamal fo
r attribute Name of MBean "kamal:Name=kamal,Type=Server", getLegalCheck() is (we
blogic.management.configuration.LegalHelper.serverMBeanSetNameLegalCheck(self,va
lue);)
at weblogic.management.internal.xml.ConfigurationParser.parse(Configurat
ionParser.java:120)
at weblogic.management.internal.xml.XmlFileRepository.loadDomain(XmlFile
Repository.java:261)
at weblogic.management.internal.xml.XmlFileRepository.loadDomain(XmlFile
Repository.java:223)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:636)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
java:621)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:359)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
55)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
23)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:468)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:209)
at $Proxy1.loadDomain(Unknown Source)
at weblogic.management.AdminServer.configureFromRepository(AdminServer.j
ava:188)
at weblogic.management.AdminServer.configure(AdminServer.java:173)
at weblogic.management.Admin.initialize(Admin.java:239)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
C:\bea\wlserver6.1>goto finish
C:\bea\wlserver6.1>cd config\kamal--
Dimitri

Samsun SCH-LC11 4G Hotspot SLOW!

Got mine today. Luckily, I don't deal with VPN much which they apparently have screwed up (http://community.vzw.com/t5/4G-Discussion/Samsung-SCH-LC11-Blocks-Microsoft-VPN/td-p/489618), something about this being a Home device not a Business Device ?? Right, purchased it off the Small Business page.
In my case, I'm not seeing great speed at all. With a Thunderbolt sitting next to me getting 25MB, I'm seeing perhaps 2.5mb ??
I've seen panatech modems in operation near here getting 18-20mb so why am I getting such slow speeds?
Pings are like 455ms and a speed test places the hotspot in sounthern calif when I am in the Phoenix metro area.
I have a solid Green 4G light and the admin page looks like it has four boxes for the LTE 4G connection (they don't look like bars)
Don't see any update mechinism on the modem configuration pages for updating location/config etc...
BTW I get a lot of resets talking to the Hotspot via the admin page. Sitting right next to the device with 99% Signal.

Update. Spent the better part of an hour and more with Support on this.
Couple things...
1) we did the complete, reboot, reset thing with no change
2) I finally was able to test the device with another computer and phone (Droid) and it performed much better with those.
I have tried 3 phones (all droids) with typical down 7Mbps-10Mbps and up 1Mbps-3Mbps which for me is good enough. Not anything like what the Thunderbolt users are getting but I have heard their up is kinda of bogus due to buffering using the speedtest app.
I have tried it on 5 additional notebooks and netbooks, again with good results. Some upwards of 12Mbsp down with the best in the 19Mbps range.
Signal at both work and home is basically 100% or close to it. So that is not the issue (coverage in Metro Phoenix appears to be good everywhere I go). The web GUI makes it hard to see what the signal is, look like 4 Bars or boxes (they don't look like bars anymore in the web Gui). The modem status shows typically 97% or around there.
So what is the problem... seems that the device which I actually got this primarily for, an HP Slate 500 is havig difficulty communicating with the device. Speed is terrible and you can really see there is something wrong in that it times out all the time while using the web GUI admin pages on it even while sitting right next to the device.
Checking with HP on this now. Note that most of the other notebooks I tested were HP's as well so it seem strange that the Slate would have issues with it. It is unexpected as I have no other problems with other access points with the Slate.
Will try it at work tomorrow (today) on a couple iPad's and a iPad2 as well as a Xoom and Galaxy Tab to see if there are any issues there.

GUI admin of IPS

Similar Messages

Maybe you are looking for