Gui Buttons don't press when upgrading from 1.1.8 to 1.4.0

We are upgrading an application from 1.1.8 to 1.4.0 and the Gui button's do not work. I believe it is due to some sort of focus problem (and parent windows) but cannot get it to break in a simple test application. Just wondering if anyone else has had gui problems when upgrading to 1.4.0. If I recompile back to 1.1.8 it works great.
Thanks.

wow that's odd...almost sounds like you have a transparent window that is over the buttons so it intercepts the mouse events. Would have to see some code but it really sounds like it's the code and not the jvm....if it were, I would think alot of people would be screaming.

Similar Messages

  • File Attachments in Conferences: Permissions don't follow when upgrading from 2010 to 2013

    Hello all,
       Here at Unisys we are upgrading our Lync Enterprise Infrastructure from 2010 to 2013.  We have found that when we do this, any conference that has an attached file the permissions of the file do not follow.  The
    options for a file permissions are Organizer, Presenter, and Everyone.  If in 2010 it is Everyone, after the upgrade, it is always reset to Organizer.  Not a big deal, but every user will need to be trained to
    go back in and reset the permissions on the file, else, they will not be visible by the other conference attendees. 
       We have a case open with Microsoft on this, and I've scoured the web trying to find others that have seen this.  Any thoughts? 
       Thanks, and it's very cold in Texas today :-)
    Jason Weaver
    Jason J. Weaver

    Thanks for the update Eason.
    Here are a few notes from the Msoft case that we are not 100% in agreement with:
    This is not only in the case of migrating user
    from 2010 to 2013. This happens even when the user is not migrated to 2013.
    You can reproduce the behavior by joining the same meeting in 2010. This is a
    default behavior of meeting configuration and this has been set this way for
    security reasons so that if organizer is not present, nobody can view the
    attachments without the permission of organizer.
    However, when we test in our environment, we can add the attachment and like you say, it is set to EVERYONE.  When we exit the meeting and rejoin with OR WITHOUT the organizer present, the attachment is still there, Everyone can see it. 
    However, when we migrate users from 2010 to 2013, the attachments are set to organizer only. 
    Go figure.  Not the end of the world, we just need to make sure we are able to explain to our users that the attachments are still there and that the organizer of each meeting will need to go back in and re-permission each conference. 
    Take care, see you all in Vegas-
    Jason J. Weaver

  • Error ORA-03113 when upgrading from 11.2.0.1 to 11.2.0.3

    I keep on getting this error when upgrading from 11.2.0.1 to 11.2.0.3
    [Thread-57] [ 2012-04-20 13:18:28.207 CEST ] [SummarizableStep.genSummary:409]  Generating Summary for:=Pre Upgrade ,status is:=Successful
    [Thread-57] [ 2012-04-20 13:18:28.208 CEST ] [SummarizableStep.genSummary:409]  Generating Summary for:=Oracle Server ,status is:=Failed
    oracle.sysman.assistants.util.step.StepExecutionException: ORA-03113: end-of-file on communication channel
    Upgrade failed due to running the step "Upgrading Oracle Server"
            at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeSubStepImpl(SubComponent.java:738)
            at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeStepImpl(SubComponent.java:585)
            at oracle.sysman.assistants.dbma.backend.component.Component.executeStepImpl(Component.java:317)
            at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:183)
            at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
            at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
            at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2708)
            at java.lang.Thread.run(Thread.java:637)
    [Thread-57] [ 2012-04-20 13:18:28.209 CEST ] [SummarizableStep.executeImpl:212]  Throwing exception e from SummarizableStep
    [Thread-57] [ 2012-04-20 13:18:28.209 CEST ] [BasicStep.configureSettings:304]  messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@4805e9f1
    oracle.sysman.assistants.util.step.StepExecutionException: ORA-03113: end-of-file on communication channel
    Upgrade failed due to running the step "Upgrading Oracle Server"
            at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeSubStepImpl(SubComponent.java:738)
            at oracle.sysman.assistants.dbma.backend.component.SubComponent.executeStepImpl(SubComponent.java:585)
            at oracle.sysman.assistants.dbma.backend.component.Component.executeStepImpl(Component.java:317)
            at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:183)
            at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
            at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
            at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2708)
            at java.lang.Thread.run(Thread.java:637)
    [Thread-57] [ 2012-04-20 13:18:31.000 CEST ] [CompManager.isModeSet:9822]   DB Upgrade Mode Setting := 1
    [Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [CompManager.isModeSet:9823]   Mode := 1 is set
    [Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [SQLEngine.done:2189]  Done called
    [Thread-57] [ 2012-04-20 13:18:31.001 CEST ] [Database.getStepSQLInterface:787]  OH in database: /app/oracle/product/11.2.0.3/db_1Any clues about what could be wrong? I am planning to upgrade with the manual steps if it does not work :(

    Pl post OS details - are you using DBUA to upgrade ? Are there any errors in the database alert log ?
    ORA-00600 [kodpunp-nulltds], ORA-00600 [kokeeiix1], [600] When Upgrading To 11GR2 [ID 1367827.1]     
    HTH
    Srini

  • How to transfer data & apps,When upgrading from a iPhone 3G to an iPhone 4 or soon 5

    When upgrading from a iPhone 3G to an iPhone 4 or soon 5
    How to transfer all phone number and apps and notes, pretty much copy my old iPhone to my new iPhone , all content and apps.
    Will it transfer my text messages also?
    Is this a nightmare or an easy task?

    Connect to iTunes and backup. Then when you receive the new phone restore from that backup.
    http://support.apple.com/kb/ht1766
    http://support.apple.com/kb/ht1414

  • When upgrading from OS X lion to OS X mountain lion will it automatically uninstall OS X lion

    when upgrading from OS X lion to OS X mountain lion will it automatically uninstall OS X lion?

    Yes. You download Mountain Lion from the App Store and, once the download is complete, the installation of Mountain Lion will begin. You can quit it at this point and backup the "Install OS Mountain Lion.app" (which I suggest) the double-click it and begin the installation.
    All remnants of Lion will be gone and you'll be running Mountain Lion.
    Good luck,
    Clinton

  • Best practice for Smartview when upgrading from Excel 2003 to Excel 2007?

    Does anyone know the best pratice for Smartview when upgrading from Excel 2003 to Excel 2007?
    Current users have Microsoft Excel 2003 with Smartview 9.3.1.2.1.003.
    Computers are being upgraded to Microsoft Excel 2007.
    What is the best pratice for Smartview in this situation?
    1. Do nothing with Smartview and just install Excel 2007.
    2. Install Excel 2007 and then uninstall and reinstall Smartview
    3. Uninstall Smartview, Install Excel 2007, and then install Smartview
    4. Somthing else??
    Thanks!

    We went with option 1 and it worked out fine. Be aware that SV processes noticeably slower in Excel 2007 than 2003. Many users were/are unhappy with the switch. We haven't tested SV v11 yet, so I'm not sure if it has improved performance with Excel 2007 or not (hopefully it does).

  • When upgrading from osx 10.7.4 to osx mountain lion I get the following Alert!  This update requires OS X version 10.8.

    When upgrading from osx 10.7.4 to osx mountain lion I get the following Alert!  This update requires OS X version 10.8.

    Sounds like you downloaded the 10.8.1 update instead of the Mountain Lion installer from the Mac App Store.
    You have to purchase Mountain Lion from the App Store to get to 10.8

  • How do I save itunes when upgrading from osx4 to osx5 ?

    how do I save itunes. bookmark, when upgrading from osx4 to osx5?

    When you upgrade attached to iTunes a backup copy is made...then after the upgrade the backup is used to restore all the content to your iDevice, assuming you are actually talking about upgrading from iOS 4 to iOS 5.

  • Any Guidelines/Documents: when upgrading from BW 3.x to Netweaver 7.0?

    Hi,
    Any Guidelines/Documents: when upgrading from BW 3.x to Netweaver 7.0?
    Thanks

    hi Amanda,
    this should help a lot
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10564d5c-cf00-2a10-7b87-c94e38267742
    also check
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7

  • Serial number not valid when upgrading from LR4 to LR5 [was:leewayphotography]

    J’ai acheté LR 4 il y a 1 an avec le n° de série sur la boite. J’ai acheté l’upgrade pour LR 5 et je n’ai jamais pu installer la version définitive avec ce n° de série.Ce n° de série n'est pas valide. La durée version d’essai est terminée et donc je dois retourner à LR 4 pour continuer à travailler ? Pourquoi cela ne fonctionne pas?

    Bonjour.
    J'ai bien compris votre réponse qu'il fallait utiliser un nouveau n° de série. J'ai bien téléchargé LR5 le 18 mars 2014, j'ai bien reçu une facture
    n° IEE2014000174985 mais je n'ai pas de trace d'un nouveau n° de série. Il n'est pas sur la facture, ni dans le logiciel?
    Que faut-il faire
    Leewayphotography
    From: John Waller
    Sent: Monday, April 21, 2014 10:14 PM
    To: leewayphotography
    Subject: Serial number not valid when upgrading from LR4 to LR5 was:leewayphotography
          Re: Serial number not valid when upgrading from LR4 to LR5 was:leewayphotography
          created by John Waller in Photoshop Lightroom - View the full discussion

  • Lost bootcamp capability when upgrading from OS X Mavericks to OS X Yosemite 10.10?

    When upgrading from OS X Mavericks to OS X Yosemite 10.10 while dual booting with Windows 7 on my bootcamp partition, I can't access the Windows partition any more. When I restart my computer and hold the alt key the only drives that are shown are my Mac OS X and Recovery (usually there is the bootcamp drive there too). Does anyone have any solutions? I can still access my windows 7 files from within my Mac partition weirdly enough. And if there aren't any solutions, is bootcamp broken on Yosemite? Is it safe to redo the process and put a fresh Windows 7 or Windows 8 partition back on bootcamp again? I'm not tech savvy enough to understand all of the coding components so if you want to walk me through it you can, or just provide a simple explanation, any help is grateful. Thanks for your help.

    Welcome To Discussions Dedesu!
    Here is some additional info.
    Tiger is available for purchase at The Apple Store (U.S.).
    If you know what to look for, a Full Retail Version, of the Panther Install CDs, or a Full Retail Version, of the Tiger Install DVD, can also be purchased rather inexpensively, at some additional online Apple retailers, like Amazon, FastMac, etc, and as posted, eBay.
    As also posted, be sure not to purchase grey, upgrade or machine specific CDs or DVDs. They will not work.
    Panther is only on CDs, not DVDs.
    Unless purchased from AppleRescue, the discs should look exactly like the images in the above links, and not say Upgrade, CPU Drop-in DVD, or "This software is part of a hardware bundle purchase - not to be sold seperately." on them.
    Additional info here Using OS X Install CDs/DVDs On Multiple Macs.
    Once Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final version.
    If your Mac meets the Tiger System Requirements, you could also consider installing that, and then use the PPC 10.4.9 Combo Update, to upgrade to the current version.
    Panther Install & Upgrade Hints
    Additionally, "Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media."
    AppleRescue, also sells a Tiger installation set on CD.
    Shop Carefully, Examine All Documentation, And I Wish You Success!
    ali b

  • Abap issues when upgrading from 4.7 to ecc6.0

    hello All,
    I am posting this question with intention of general issues we face that are abap related when upgrade from 4.7 to ECC6.0,
    do the programs ahve to be adjusted, if sumone cud also throw some light on what is unicode and wat role does it play in the upgrade,
    some specific examples wud be appreciated
    thanks,
    RS

    hi,
    Go through this
    Unicode is an international standard that assigns characters from virtually every
    language and script a unique Unicode Scalar Value, which is a number written in
    hexadecimal notation.
         Character     Unicode Scalar Value     Unicode Character Name
         A      U+0041          LATIN CAPITAL LETTER A
         Ä     U+00C4          LATIN CAPITAL LETTER A WITH DIAERESIS
         α     U+03B1          GREEK SMALL LATTER ALPHA
    Implementing the Unicode standard enables a single software product or a single
    web site to be accessed across multiple platforms, languages, and countries without
    the need for re-engineering. It allows data to be transferred across many different
    SAP and non-SAP systems without corruption. To meet these requirements, the SAP
    Unicode team continues to promote Unicode-enabled SAP systems, aid their
    installation, and provide tools and full technical support for the smooth
    conversion of existing SAP non-Unicode systems to Unicode.

  • Issue with SAP GUI 7.30 launching with users upgrading from 7.10

    We started rolling out SAP 7.30 GUI Final 7300.3.7.117 out to people, and we've ran into this error with people who had upgraded from SAP GUI 7.10.
    Our environmental variable uses saplogon.ini (SAPLOGON_INI_FILE) and points to c:\windows\saplogon.ini
    I don't know why the program is trying to search for saplogontree.xml.
    I've tried uninstalling, rebooting, reinstalling. Deleting some of the %appdata% SAP folders.
    I need some guidance as people who upgraded from GUI 7.20 do not run into this issue.

    This popup would make sense Jason,as the path C:\Windows\SapLogonTree.xml would not be a valid path to this file.
    Really, 7.10 should not have been used at all as an upgrade path as this had finished support in 2009
    If you have a small number of users with 7.10, it's recommend to remove it via add/remove programs in the OS, then install a clean 7.30 gui.
    The environment variable should not point to C:\Windows\ at all since this is a restricted folder in
    Windows Vista and higher, and will only cause further trouble later on in the updates
    See note http://service.sap.com/sap/support/notes/1409494
    Jude

  • ORA-00955 when upgrading from Content Server 5.0.2 to Publisher?

    I am upgrading Content Server 5.0.2 to Publisher.
    After running the sw installation and having imported the publisher.pte file, I am starting the Publisher and receiving an Oracle error "ORA-00955: name is already used by an existing object". From the messages logged, it looks like the error is encountered when recreating the object PCSACTIVE.PK_PCSACTIVE (first SQL statement with "Recreating ...", all others before where "Adding ...".
    My questions:
    1. has somebody else encounteered the same error?
    2. does anybody know how to trap the SQL being executed?As the upgrade is done automatically by the Publisher when starting, I have found so far no way of checking the SQL or knowing which SQL statements are executed against the DB) when "Recreating" an object.
    Thanks in advance for your help.
    P.S. Customer Support has also been contacted, but it looks like noone else has reported this kind of problems.

    Pl post OS details - are you using DBUA to upgrade ? Are there any errors in the database alert log ?
    ORA-00600 [kodpunp-nulltds], ORA-00600 [kokeeiix1], [600] When Upgrading To 11GR2 [ID 1367827.1]     
    HTH
    Srini

  • How to maintain tags when upgrading from PSE 5 to PSE 12?

    I'm upgrading from Photoshop Elements version 5 to version 12, as my current version is not working properly. (Possibly corrupted?). It will not allow me to backup my catalog - the software freezes after a period of time during the "Reconnecting Files" stage. I'm reluctant to proceed in fear of losing the thousands of tags I have if the installation process does not go smoothly (since I don't have a backup of my catalog). Any suggestions on how to proceed?

    Thank you for your reply. Unfortunately my situation may be worse than I
    originally thought. ALL of my files are showing that they are "Missing" and
    need to be "Reconnected," however the software freezes when I try to
    reconnect. I still have the photo files under "My Photos" on my hard drive
    but if the "Reconnect" is not made before launching Version 12, doesn't
    that mean that I will lose all the cataloging/tags made in Photoshop? I
    plan to install PSE12 on the same machine. I'm at a loss on how to proceed.
    It would be so disappointing to lose hundreds of hours of organization over
    a ten year time period on thousands of photos.
    On Wed, Apr 2, 2014 at 10:27 PM, andaleebfatima1

Maybe you are looking for

  • Opening dbs thru button events, help, i`m a newbie..

    i have the following fn for opening the db public static void main(String args[]) throws Exception new login(new javax.swing.JFrame(), true).show(); Class.forName("sun.jdbc.odbc.JdbcOdbcDriver"); open(); select(); static void open() throws SQLExcepti

  • [SOLVED] howto unzip multipart zipfiles?

    Hi all, I have a problem that is driving me crazy, I downloaded some app I need and its a multipart zip file, In windows I should just unzip the file regularly and all went good, whoever the unzip linux utility refuses to do so. I do have a virtual m

  • BSP or WebDynpro for RF transactions?

    For WM RF transactions, tipically, custom transactions are created from scratch (most of the time) in ABAP and seen in the RF devices using SAPConnector (either text based or html (SAPWEBConsole). For the latter, the SAP transactions are shown in int

  • Photo Albums on iP4 iOS4

    Well now I have my albums listed on the photos folders on the phone. About time!!! Question is: Is there a way to take a photo from the camera roll and place it in a album on the phone itself without syncing back to a computer? I take alot of picture

  • Fm Transmitters

    MY mom has an ipod and was thinking about purchasing one of the FM transmitters for the car. The only problem is that she doesnt know which type to get. We live in the city so she wants one that will get good reception. Thanks in advance. emachines