GUI_DOWNLOAD with Internal table column names

Hi!
I am using FM 'GUI_DOWNLOAD' to download internal table to excel sheet. But, I am finding internal tables values only into excel sheet. I want Internal Table's column name as well. Please help me. and guide me.
Thanks in advance.
-Rupesh kayasth.

Hi Rupesh,
You have two tables in the Tables parameter. One is DATA_TAB where you have to provide the internal table name which data you want to download. Second one is Field Names where you can provide the column names for the internal table fields. Concatenate the column names in a string and pass it to Fields names table.
Regards,
Jayaram...
Message was edited by:
Jayarama Sarma Mudda

Similar Messages

How to find internal table column names

Hi Friends,
I have declared one internal table with 45 fields.
Here is my situation.
I need to create dynamic table with all above 45 fields and some more fields (approx 10 fields).
I got the solution for creating dynamic table. Only thing is
I have to assign all the above 75 columns to other internal table.
is there any way we can read internal table field names in the program.
we can acheive this by hard coding the all 75 field names.
since it is 75 columns, i want to pass one by one field dynamically to the other table.
Pls give me a solution.
thanks in advance.

HI,
Find the code for dynamical internal table., which helps to increase the fields in the internal table dynamically.
REPORT ZTEST_R3.
FIELD-SYMBOLS: <L_TABLE> TYPE TABLE,
<L_LINE> TYPE ANY,
<L_FIELD> TYPE ANY.
DATA: IS_LVC_CAT TYPE LVC_S_FCAT,
IT_LVC_CAT TYPE LVC_T_FCAT.
DATA: NEW_TABLE TYPE REF TO DATA,
NEW_LINE TYPE REF TO DATA.
START-OF-SELECTION.
IS_LVC_CAT-FIELDNAME = 'KUNNR'.
APPEND IS_LVC_CAT TO IT_LVC_CAT.
IS_LVC_CAT-FIELDNAME = 'NAME1'.
APPEND IS_LVC_CAT TO IT_LVC_CAT.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = IT_LVC_CAT
IMPORTING
EP_TABLE = NEW_TABLE.
*Create a new Line with the same structure of the table.
ASSIGN NEW_TABLE->* TO <L_TABLE>.
CREATE DATA NEW_LINE LIKE LINE OF <L_TABLE>.
ASSIGN NEW_LINE->* TO <L_LINE>.
DO 2 TIMES.
ASSIGN COMPONENT 'KUNNR' OF STRUCTURE <L_LINE> TO <L_FIELD>.
<L_FIELD> = SY-INDEX.
ASSIGN COMPONENT 'NAME1' OF STRUCTURE <L_LINE> TO <L_FIELD>.
<L_FIELD> = 'A'.
INSERT <L_LINE> INTO TABLE <L_TABLE>.
ENDDO.
LOOP AT <L_TABLE> INTO <L_LINE>.
WRITE:/ <L_LINE>.
ENDLOOP.
READ TABLE <L_TABLE> INTO <L_LINE> INDEX 2.
<L_LINE>+10(2) = 'B'.
MODIFY <L_TABLE> FROM <L_LINE> INDEX 2.
LOOP AT <L_TABLE> INTO <L_LINE>.
WRITE:/ <L_LINE>.
ENDLOOP.

I need the "Real" Table / Table Column names from a sql view

Firstly, we have a system with ~1000 tables and ~250 views. We have field level security on the table columns (in our code)
Now we have a lot of views which select data from the tables, but I need to get the "Table Column Name" that is linked in the view.
I know there are view columns that is not linked to a specific table column, (or concatenation of columns) so those columns can just return NULL.
From the sample you will see there is a view selecting data from another view. I know it is not the best sql performance (execution path) but that is another topic on its own.
I went through a lot of the sys.* stored procs or sys.* views to try and figure out if there is a view that we can use to get the expected results.
here is the sql code:
if
Exists (select
* from
sys.all_objects
where name =
'AliasView2')
drop view dbo.AliasView2
if
Exists (select
* from
sys.all_objects
where name =
'AliasView1')
drop view dbo.AliasView1
if
Exists (select
* from
sys.all_objects
where name =
'Table4')
BEGIN
alter table dbo.Table4
DROP CONSTRAINT [FK_T4_T3]
alter table dbo.Table4
DROP CONSTRAINT [PK_T4_Constraint]
drop table dbo.Table4
END
if
Exists (select
* from
sys.all_objects
where name =
'Table3')
BEGIN
alter table dbo.Table3
DROP CONSTRAINT [FK_T3_T2]
alter table dbo.Table3
DROP CONSTRAINT [PK_T3_Constraint]
drop table dbo.Table3
END
if
Exists (select
* from
sys.all_objects
where name =
'Table2')
BEGIN
alter table dbo.Table2
DROP CONSTRAINT [FK_T2_T1]
alter table dbo.Table2
DROP CONSTRAINT [PK_T2_Constraint]
drop table dbo.Table2
END
if
Exists (select
* from
sys.all_objects
where name =
'Table1')
BEGIN
alter table dbo.Table1
DROP CONSTRAINT [PK_T1_Constraint]
drop table dbo.Table1
END
create
Table dbo.Table1
T1_PK        int
NOT NULL
Identity(1, 1)
CONSTRAINT [PK_T1_Constraint]
PRIMARY KEY (T1_PK),
T1_Field1    varchar
NULL,
T1_Field2    varchar
NULL,
create
Table dbo.Table2
T2_PK        int
NOT NULL
Identity(1, 1)
CONSTRAINT [PK_T2_Constraint]
PRIMARY KEY (T2_PK),
T2_Field1    varchar
NULL,
T2_Field2    varchar
NULL,
T2_FK        int
NOT NULL
CONSTRAINT [FK_T2_T1]
FOREIGN KEY (T2_FK)
REFERENCES dbo.Table1
(T1_PK)
create
Table dbo.Table3
T3_PK        int
NOT NULL
Identity(1, 1)
CONSTRAINT [PK_T3_Constraint]
PRIMARY KEY (T3_PK),
T3_Field1    varchar
NULL,
T3_Field2    varchar
NULL,
T3_FK        int
NOT NULL
CONSTRAINT [FK_T3_T2]
FOREIGN KEY (T3_FK)
REFERENCES dbo.Table2
(T2_PK)
create
Table dbo.Table4
T4_PK        int
NOT NULL
Identity(1, 1)
CONSTRAINT [PK_T4_Constraint]
PRIMARY KEY (T4_PK),
T4_Field1    varchar
NULL,
T4_Field2    varchar
NULL,
T4_FK        int
NOT NULL
CONSTRAINT [FK_T4_T3]
FOREIGN KEY (T4_FK)
REFERENCES dbo.Table3
(T3_PK)
GO
--Create a basic view to select some data
CREATE
VIEW dbo.AliasView1
AS
select
t2.T2_FK as Table2_ForeignKey,
t1.T1_Field1 as Table1_FieldOne,
t2.T2_Field1 as Table2_FieldOne
FROM Table1 t1
Left outer
join Table2 t2 on t2.T2_FK
= t1.T1_PK;
GO
--Create another view that select basic data, and also selecting data from view 1
CREATE
VIEW dbo.AliasView2
AS
select
v1.Table1_FieldOne
as Table1_FieldOne,
v1.Table2_FieldOne
as Table2_FieldOne,
t3.T3_Field1 as Table3_FieldOne,
t3.T3_Field2
FROM Table3 t3
Left outer
join AliasView1 v1 on v1.Table2_ForeignKey
= t3.T3_PK;
GO
--My attempt to get the desired output, but no luck
SELECT
col.COLUMN_NAME as AliasColumnName, col.DATA_TYPE, col.CHARACTER_MAXIMUM_LENGTH
as max_length, colu.*
FROM
information_schema.COLUMNS col
left
outer join
(SELECT
VIEW_SCHEMA, VIEW_NAME, COLUMN_NAME,
min(TABLE_NAME)
as TABLE_NAME
FROM information_schema.VIEW_COLUMN_USAGE colu
WHERE VIEW_NAME =
'AliasView2'
Group by VIEW_SCHEMA, VIEW_NAME, COLUMN_NAME
) COLU ON colU.VIEW_NAME
= col.TABLE_NAME
and colu.COLUMN_NAME
= col.COLUMN_NAME
left
outer join
(select a.name
as TableName, c.name
as FieldName
from sys.foreign_key_columns fk
join sys.all_objects a
on a.object_id
= fk.parent_object_id
join sys.all_columns c
on c.object_id
= a.object_id
and c.column_id
= fk.parent_column_id
join sys.all_objects ar
on ar.object_id
= fk.referenced_object_id
join sys.all_columns cr
on cr.object_id
= ar.object_id
and cr.column_id
= fk.referenced_column_id
join sys.schemas scr
on scr.schema_id
= ar.schema_id
) fks on fks.TableName
= colu.TABLE_NAME
and fks.FieldName
= colu.COLUMN_NAME
WHERE COL.TABLE_NAME
= 'AliasView2'
order
by col.ORDINAL_POSITION
This is the results being returned: (That is not 100% what I am looking for)
AliasColumnName
DATA_TYPE
max_length
VIEW_SCHEMA
VIEW_NAME
COLUMN_NAME
TABLE_NAME
Table1_FieldOne
varchar
1
dbo
AliasView2
Table1_FieldOne
AliasView1
Table2_FieldOne
varchar
1
dbo
AliasView2
Table2_FieldOne
AliasView1
Table3_FieldOne
varchar
1
NULL
NULL
NULL
NULL
T3_Field2
varchar
1
dbo
AliasView2
T3_Field2
Table3
The desired results must be like the following:
AliasColumnName
DATA_TYPE
max_length
VIEW_SCHEMA
VIEW_NAME
COLUMN_NAME
TABLE_NAME
Table1_FieldOne
varchar
1
dbo
AliasView2
T1_Field1
Table1
Table2_FieldOne
varchar
1
dbo
AliasView2
T2_Field1
Table2
Table3_FieldOne
varchar
1
dbo
AliasView2
T3_Field1
Table3
T3_Field2
varchar
1
dbo
AliasView2
T3_Field2
Table3
NOTE: the COLUMN_NAME and TABLE_NAME must the REAL field of the TABLE it belongs to and not only ONE LEVEL Higher’s ALIAS View Name

Now we have a lot of views which select data from the tables, but I need to get the "Table Column Name" that is linked in the view.
If you are using SQL Server 2012/2014, then you can use
sys.dm_exec_describe_first_result_set (Transact-SQL) to gte the informations.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Please help me I am not seeing Database table column names in field explorer view

Hi,
I am developing a crystal report using eclipse and sql server. After creating connection, when i drag and drop tables, The table name and its columns should apper in field explorer view. Then we drag the columns onto crystal report. Unfortunately I am just seeing only table names but not column names in field explorer view. Could anyone help me?
After downloading eclipse I have plugged in the crystal report using the following instructions
1. Click on the Help menu, and then Software Updates > Find and Install... to open the Install/Update wizard.
2. Select Search for new features to install and click Next.
3. Click the New Remote Site button. This will launch the New Update Site wizard
4. Type the Business Objects Updsate Site for the Name field and the following for the URL: http://www.businessobjects.com/products/dev_zone/eclipse/
5. Click OK to complete the wizard.
6. Enable the newly created Business Objects Update Site checkbox as well as the Callisto Discovery Site (which should appear by default with Eclipse 3.2) and click Finish.
Expand the Business Objects Update Site node and enable the Crystal Reports for Eclipse 1.0.0v555 checkbox.
8. Expand the Callisto Discovery Site and click the button "Select Required". This will automatically select the required Eclipse features necessary to successfully install Crystal Reports for Eclipse.
Thank You
Rajavardhan Sarkapally

Now we have a lot of views which select data from the tables, but I need to get the "Table Column Name" that is linked in the view.
If you are using SQL Server 2012/2014, then you can use
sys.dm_exec_describe_first_result_set (Transact-SQL) to gte the informations.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Syntax of DDL options and related (table) column names

Hi,
where can I find something like a mapping between DDL options and related table column names?
For example I do have the table options PCTFREE, FREELISTS and NOCOMPRESS. The related table columns out of user_tables are PCT_FREE, FREELIST and COMPRESS.
PCT(_)FREE wins an Underscore, FREELIST(S) wins an "S" and it is "NOCOMPRESS" if COMPRESS has a value "Y(es)".
Hope somebody can help.

So far I didn't find any information that is not in
the DDL script gernerated from
DBMS_METADATA.get_DDL.Alright, I give you an example:
I create a table with the following DDL:
"CREATE TABLE IntBuch (
int_bunr integer NOT NULL,
int_sdat double precision NOT NULL,
int_hblz char(8) NOT NULL,
int_hkto char(7) NOT NULL,
int_hdat double precision NOT NULL,
KtoNr char(7) NOT NULL,
BLZ char(8) NOT NULL,
CONSTRAINT PK_IntBuch PRIMARY KEY (int_bunr)
USING INDEX
PCTFREE 10
STORAGE (
INITIAL 1000
NEXT 500
PCTINCREASE 0
MINEXTENTS 1
MAXEXTENTS 4096
PCTFREE 20
LOGGING
CREATE UNIQUE INDEX intid
ON IntBuch (int_bunr DESC)
CREATE INDEX hkto
ON IntBuch (int_hblz,int_hkto)
COMMENT ON TABLE IntBuch
IS 'Kommentar zu DB-Tabelle InBuch'
COMMENT ON COLUMN IntBuch.int_sdat IS 'Kommentar zu DB-Spalte int_sdat'
ALTER TABLE IntBuch
ADD CONSTRAINT Gutschrift FOREIGN KEY (int_hkto,int_hblz) REFERENCES Konto
ON DELETE CASCADE
ADD FOREIGN KEY (KtoNr,BLZ) REFERENCES Konto
ADD FOREIGN KEY (int_bunr) REFERENCES Buchung
ON DELETE CASCADE
After that I read the DDL with DBMS_METADATA.get_DDL and I get
" CREATE TABLE "UOENDE"."INTBUCH"
(     "INT_BUNR" NUMBER(*,0) NOT NULL ENABLE,
     "INT_SDAT" FLOAT(126) NOT NULL ENABLE,
     "INT_HBLZ" CHAR(8) NOT NULL ENABLE,
     "INT_HKTO" CHAR(7) NOT NULL ENABLE,
     "INT_HDAT" FLOAT(126) NOT NULL ENABLE,
     "KTONR" CHAR(7) NOT NULL ENABLE,
     "BLZ" CHAR(8) NOT NULL ENABLE,
     CONSTRAINT "PK_INTBUCH" PRIMARY KEY ("INT_BUNR")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 16384 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
     CONSTRAINT "GUTSCHRIFT" FOREIGN KEY ("INT_HKTO", "INT_HBLZ")
     REFERENCES "UOENDE"."KONTO" ("KTONR", "BLZ") ON DELETE CASCADE ENABLE,
     FOREIGN KEY ("KTONR", "BLZ")
     REFERENCES "UOENDE"."KONTO" ("KTONR", "BLZ") ENABLE,
     FOREIGN KEY ("INT_BUNR")
     REFERENCES "UOENDE"."BUCHUNG" ("BU_NR") ON DELETE CASCADE ENABLE
) PCTFREE 20 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS"
If there are no more DDLOptions possible than that, it is fine for me. If not, but all kinds of options are to find in only one or two tables of the database ( user_tables for table options, dba_constraints and dba_segments for column options, primary and foreign keys, user_indexes and user_segments for indexes ...), that is fine for me, too. (As long as I get to know which tables are "sufficient" for that.) If it is different than both of that, that's bad.
However if you want to use defaults instead of
absolut values, it is better to remove certain parts,
like the storage clause, from the generated output.I understand this, but I am more interested to have all and not leaving out some of them in order to have the defaults in the database after running the DDL.
A totally different approach could be to
a) create a database link from one DB to another.
b) create table <new_table> as select * from
<old_table@dbLink> where 1=2;I keep that in mind, thanks for that hint.

MS Access DB with Spaces in Column Name

Good Afternoon-
I'm having some serious headaches with a table that I need to extract information from. The powers that be wrote it with the following column names "Contract Number" , "Customer Number", "Description".
Note the spaces in the columns.
Sample code from here: http://www.planet-source-code.com/vb/scripts/ShowCode.asp?txtCodeId=2691&lngWId=2
I'm using sample code for connecting to the database and I can access everything using the select statements, except if the column contains a space. I get the following errors:
s.execute("select [Customer Number], Name from Customer");
Error: java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 1.
s.execute("select \"Customer Number\", Name from Customer");
Error: java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 1.
s.execute("select Customer*Number, Name from Customer");
Error: java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 2.
s.execute("select 'Customer Number' , Name from Customer");
Data from column_name: Customer Number , Unknown
This works, but would require parsing-
s.execute("select * from Customer");
Data from column_name: 5 , Unknown
Suggestions would be truly appreciated.
Jason

"select [Customer Number] , Name from Customer " ;
returned the correct responses.Double quoted identifiers, which is part of ANSI SQL should have solved it....
"select \"Customer Number\" , Name from Customer " ;
As mentioned above it has certainly been my experience that DBAs (those with that title) all insist that quoted identifiers should never be used. Thus refactoring the database identifiers is actually the correct solution.

Finding source database table/column name for a column in a view

Hi i need to be able to identify the original database table/column name for a column in a view.
e.g. say i have a view like this
create v1 as select a.name fname, b.name bname, c.name cname,......
from u1.names a, u2.names b. u3.names c
where .....
Now I want to find out that the database table/column name for the fname, bname and cname columns in the view v1, which in this instance is u1.name.name, u2.names.name, u3.names.name.
But i need to be able to do it for any view. Short of parsing the SQL is there an easy way of doing this?
Now obviusly I can't do this for virtual columns but I will know my column is not virtual as it has an index on it.

But i need to be able to do it for any view. Short of
parsing the SQL is there an easy way of doing this?No, parsing the SQL is the only way. Good luck it is not something I would want to attempt.

How to modify a table column name

Hi all,
How to modify a table column name...
Thanks

could type the command here... but will not do that..because you are supposed to read the docs.
You can find the command here..
http://www.faqs.org/docs/ppbook/r22871.htm
Regards,
G.

Remain case for table column name

Hello, i am a java developer. I had helped my company to develop a java application all the while and before this we are using ms sql server database. Recently, we want to migrate the database to oracle database. The problem is, in our application, we use the resultsetmetadata to retrieve all the table column name and respective data and store in hashtable, but in ms sql server the table column name is not all in uppercase. When our application try to get the data using hashtable.get("aColumnName"), it will fail because in oracle the column name is all in uppercase. There are more than 1000 jsp page and java code that used the same method to get data, so if i want to change all the code to uppercase, it will consume a lot of unproductive time, is there any way to solve this?

I assume that your code builds an SQL statement like "select * from ??? where table_name = '????';".
If this is correct just wrap the table_name in UPPER(table_name).
If my assumption is incorrect then please give more information.
James.

Sum function for internal table column

Dear Experts,
how can I sum a complete internal table column.
Regards
ertas

Hi,
Use SUM in AT END of event in the loop of an internal table.
Example
Loop at ITAB into wa_itab.
at end of wa_itab-field.
sum. " Here all numric fields will be summed and stored in that filed(wa_itab-field)
endat.
Endloop.
Regards
Krishna

Read from a internal table whose name is decided in runtime

Dear ABAPers
I've an internal table's name in a variable, the name is populated in runtime (user_command->ls_selfield-tabname). Now that using the name (in the variable) i need to read a row from that particular internal table (which is populated into the variable). How can i do that.
Regards
Prabumanoharan

hi see the coding and do the changes accordingly...
report ztests .
DATA:
o_ref TYPE REF TO data.
FIELD-SYMBOLS:
<lt_table> TYPE STANDARD TABLE,
<fs>       TYPE ANY,
<field>    TYPE ANY,
<field1>   TYPE ANY.
PARAMETERS:
p_tab       TYPE tabname default 'MARA', " Table name (eg: MARA)
p_field(20) TYPE c default 'MATNR'.      " Field name (eg: MATNR)
START-OF-SELECTION.
CREATE DATA o_ref TYPE TABLE OF (p_tab).
ASSIGN p_field TO <field1>.
ASSIGN o_ref->* TO <lt_table>.
SELECT *
    INTO TABLE <lt_table>
    FROM (p_tab).
LOOP AT <lt_table> ASSIGNING <fs>.
    ASSIGN COMPONENT <field1> OF STRUCTURE <fs>
                  TO <field>.
    IF sy-subrc = 0.
      WRITE:/ <field>.
    ENDIF.
ENDLOOP.

I am getting problem with internal table & work area declaration.

I am working with 'makt' table ..with the table makt i need to work with styles attributes ..so i declared like this
TYPES : BEGIN OF ty_makt,
         matnr TYPE makt-matnr,
         spras TYPE makt-spras,
         maktx TYPE makt-maktx,
         maktg TYPE makt-maktg,
         celltab TYPE lvc_t_styl,
       END OF ty_makt.
DATA : i_makt TYPE TABLE OF ty_makt.
DATA : wa_makt TYPE ty_makt .
    But end of program i need to update dbtable "makt"...i am getting problem with internal table & work area declaration.
i think makt table fields mapping and internal table/work area mapping is not correct. so please help me to get out from this.

Hi Nagasankar,
TYPES : BEGIN OF TY_MATNR,
              MATNR TYPE MAKT-MATNR,
              SPRAS TYPE MAKT-SPRAS,
              MAKTX TYPE MAKT-MAKTX,
              MAKTX TYPE MAKT-MAKTG,
              CELLTAB TYPE LVC_T_STYL, " Its Working perfectly fine..
             END OF TY_MAKT.
DATA: IT_MAKT TYPE STANDARD TABLE OF TY_MAKT,
          WA_MAKT TYPE TY_MAKT.
Its working perfectly fine. if still you are facing any issue post your complete code.
Thanks,
Sandeep

Problem when expanding Tree - Tree with nested table column

Hi, i have created the tree using the Tree with nested table column.
I have created a node called TREE_ROOT in the context.
This node has few attributes which includes children_loaded, is_leaf, is_expanded.
I have created the recursive node TREE_SUB for the above node TREE_ROOT.
In the view, i have created the table with the master column. The above attributes have been mapped accordingly. I have created the action handler for load_children.
In this action handler method, i receive the context_element correctly. In this method, i determine the children of the selected element and the resulting children are attached to this context_element.
But the problem is: when i add elements to context_elements in the method load_children, these
elements get added to the node TREE_ROOT as well.
Please help.
thanks and best regards,
Pramod

I just use some types defined in this user... Well, I hope you know what is the type definition of d_period_sec,
don't you ? I didn't ask to provide all types existed now, only types you are
using.
Anyhow you have been granted with execute privilege for types you are using:
SQL> conn tau_tll/tau_tll;
Connected.
SQL> create or replace type d_period_sec as object (date# date);
2 /
Type created.
SQL> grant execute on d_period_sec to public with grant option;
Grant succeeded.
SQL> conn scott/tiger
Connected.
SQL> CREATE OR REPLACE TYPE unit_function AS OBJECT (
2 xi NUMBER,
3 yi NUMBER,
4 xe NUMBER,
5 ye NUMBER,
6 xm NUMBER,
7 ym NUMBER,
8 v NUMBER,
9 a NUMBER,
10 f NUMBER,
11 descr VARCHAR2 (20)
12 );
13 /
Type created.
SQL> grant execute on unit_function to master;
Grant succeeded.
SQL> CREATE OR REPLACE TYPE unit_moving_point AS OBJECT
2 (
3 p tau_tll.d_period_sec, -- from user TAU_TLL
4
5 m unit_function
6 )
7 /
Type created.
SQL> grant execute on unit_moving_point to master;
Grant succeeded.
SQL> CREATE OR REPLACE TYPE moving_point_tab AS TABLE OF unit_moving_point;
2 /
Type created.
SQL> grant execute on moving_point_tab to master;
Grant succeeded.
SQL> CREATE OR REPLACE TYPE moving_point AS OBJECT (u_tab moving_point_tab);
2 /
Type created.
SQL> grant execute on moving_point to master;
Grant succeeded.
SQL> conn master/master
Connected.
SQL> CREATE TABLE MPOINTS (
2 id NUMBER,
3 mpoint scott.Moving_Point)
4 NESTED TABLE mpoint.u_tab store as moving_tab;
Table created.Rgds.

How to use simple types for table column names ?

Hi,
can any one tell how to to use simple types for table column names?
It is required in internationalizing of webdynpro applications.
Regards,
Rajesh

Hi,
1: define required column names in <SimpleType>
2:use the following code to get those values
3:bind 'text' property of Column headers to context attributes
4:take a context attribute 'Value' as type of <SimpleType>
5:set these values to context attributes
IWDAttributeInfo objAttrInfo=wdContext.getNodeInfo().getAttribute(IPrivate<ViewName>View.IContextElement.VALUE);
ISimpleTypeModifiable simple=objAttrInfo.getModifiableSimpleType();
Map m=simple.getEnumerationTexts();
Collection c=m.values();
Iterator it=c.iterator();
if(it.hasNext())
wdContext.currentContextElement.set<att1>(it.next().toString);
if(it.hasNext())
wdContext.currentContextElement.set<att2>(it.next().toString);
if(it.hasNext())
wdContext.currentContextElement.set<att3>(it.next().toString);
Regards
LakshmiNarayana

Query to list tables with a particular column name in a schema!!

Is there any way to know?
Thanks in advance.

You can query the data dictionary views to get this information.
For example
untested
select table_name
from user_tab_columns
where column_name = 'my particular column name';There is also all_tab_columns and dba_tab_columns. Both of which would include the schema name.
Edited by: Sven W. on Sep 9, 2011 2:24 PM

GUI_DOWNLOAD with Internal table column names

Similar Messages

Maybe you are looking for