GUI glitching and blinking when running games

My circa-2011 MacBook Pro is running OS X 10.6.8
Last May, while completing a second playthrough of a game downloaded from Steam and first completed a few weeks earlier, my screen suddenly filled with blocks of static, my dock and taskbar fragmented and began appearing and vanishing, my desktop icons began clipping through my open windows, contents of windows appeared inside other windows, and more-- it was a mess.
I called the support hotline and managed to fix everything with the support guy's patient help. I foolishly did not write down how to fix an error like that, so I didn't remember exactly what had gone wrong, either. Between that day and now, the problem has not reoccurred, so it's obviously linked to trying to game on this computer.
Today, I booted up Minecraft (downloaded legally and scanned; the problem is not with the software), expecting it to work just as well as it's been for the few days I've had it. Suddenly, the same error began happening again, and I managed to force the game to quit before my whole screen was unusable. As soon as the program had quit, the glitches stopped.
I've scanned for new software, java updates, etc; I'm all set. I've also scanned for viruses, and there aren't any. I'm at a loss; what could be causing these frustrating glitches, and how can I stop them?

That is a MAX Temp not what it is supposed to run at all the time or even for a short but extended priod of time.
The temp of your Mac should be somewhere in the range of 40-50°c when at idle. If it is higher then that then you may have a problem with the thermal paste or the cooling system. Not all computers coming off the production line are made the same.
I just last night put a i7 2720QM quad core CPU, 2.2 Ghz, in my Dell E6420 that came with a Dual core i5 2.5Ghz CPU. I redid the thermal paste with a very good product and the i7 is running cooler then the i5 did. Also the i5 would run one core at around 50°c all the time and the other around the 40° mark. The i7 runs at a steady 42-47°c for all 4 cores. So all intel CPUs aren't built that same either.
If your Mac is running at idle above 50°c I'd take it back and get another. You do have 14 days to return it.

Similar Messages

My Pc shutDown When Running Game Then Bettery Be Hot. Please Help Me Fast

My Pc shutDown When Running Game Then Bettery Be Hot.
Like iM Play FaceBook Game'S FarmVille Etc Or AnyGame Like San Andreas MultiPlayer / Online Games...... After 10-20 Mnt My Pc ShutDown i ReFormated iT But The Same Problem . Here My Computer Details Please Help Me .. .. . . . . . .. .. . . . . .. . .. . . . . i Need Help .. . .. . .. .. . . . .. . .. .. . . ..
http://img204.imageshack.us/img204/4028/detailsb.png
Please Help Me i Need Fast Help .... . . . . . . .... .. . .. . .. . . .. . . . .. .. .. . . .
subject edited by moderator.
ps: no need to add "not solved" tag into the subject.

Hi and welcome to the forum!
Which lenovo notebook is it? Does it have a sticker on the bottom bearing a number like 2668-KHU? Let us know that number, there is no need to post S/N though.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Why does my iMac temperature go up when running games through Windows using BootCamp?

Hey guys,
These are my current specs: iMac 27 inch, intel i7 quad core 3.5 ghz, 16gb ram and 1tb sata hardrive with nvidia gtx 780m.
Ive installed windows on my mac and have discovered that when running games the temperature is much higher. For the same game on Windows i've had my CPU run at 80-81 C on roughly all cores and my GPU temp went up to 85 C. On mavericks same game runs at temps of 58 C for CPU and 71 C for GPU. However on mavericks the frames rates are lower even when running same settings as on windows.
I tend to think that mavericks is somehow limiting my hardware in order to keep the temperature down whereas on windows on my mac I can really feel the kick of the system yet the temperature goes really high. Is there any way to sort this out?

gpu driver optimising is much more used in windows it give better fps but less stability and as you notice more heat and more noise as the fans work harder
lower the eye candy and resolution is a cure

My jdeveloper11 offten collapse and quit when running, help me!! thanks

my jdeveloper11 offten collapse and quit when running, help me!! thanks

thanks to all.
error info in file hs_err_pid656.txt-------------
# An unexpected error has been detected by Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d905dc3, pid=656, tid=1788
# Java VM: Java HotSpot(TM) Client VM (10.0-b19 mixed mode windows-x86)
# Problematic frame:
# V [jvm.dll+0x95dc3]
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
--------------- T H R E A D ---------------
Current thread (0x03272000): VMThread [stack: 0x03300000,0x03400000] [id=1788]
siginfo: ExceptionCode=0xc0000005, reading address 0x00000008
Registers:
EAX=0x00000008, EBX=0x000000d0, ECX=0x033ffc40, EDX=0x37236024
ESP=0x033ffa04, EBP=0x033ffa98, ESI=0x37236024, EDI=0x033ffc40
EIP=0x6d905dc3, EFLAGS=0x00010283
Top of Stack: (sp=0x033ffa04)
0x033ffa04: 37236020 37235e00 6d902d48 37236024
0x033ffa14: 37236020 00000018 37235e00 37235e90
0x033ffa24: 6d9028fa 033ffa98 37235e00 000000d0
0x033ffa34: 37235e90 37236140 37236140 033ffa98
0x033ffa44: 6d878634 000000ac 033ffa98 37235e00
0x033ffa54: 000000d0 6d9efc4d 37235e90 033ffa98
0x033ffa64: 37235e00 000000d0 37235e00 00c3fe30
0x033ffa74: 37235e00 37236000 6d9efa6b 37235e00
Instructions: (pc=0x6d905dc3)
0x6d905db3: 24 08 8b 06 85 c0 57 8b f9 74 55 3b 47 1c 73 50
0x6d905dc3: 8b 08 83 e1 03 80 f9 03 75 1f 8a 0d dd b5 a7 6d
Stack: [0x03300000,0x03400000], sp=0x033ffa04, free space=1022k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V [jvm.dll+0x95dc3]
VM_Operation (0x047acb50): GenCollectForAllocation, mode: safepoint, requested by thread 0x03ecc800
--------------- P R O C E S S ---------------
Heap
def new generation total 16960K, used 15660K [0x10030000, 0x11290000, 0x12790000)
eden space 15104K, 100% used [0x10030000, 0x10ef0000, 0x10ef0000)
from space 1856K, 29% used [0x110c0000, 0x1114b040, 0x11290000)
to space 1856K, 0% used [0x10ef0000, 0x10ef24e8, 0x110c0000)
tenured generation total 224120K, used 176661K [0x12790000, 0x2026e000, 0x30030000)
the space 224120K, 78% used [0x12790000, 0x1d4157f8, 0x1d415800, 0x2026e000)
compacting perm gen total 121856K, used 121662K [0x30030000, 0x37730000, 0x40030000)
the space 121856K, 99% used [0x30030000, 0x376ffaf0, 0x376ffc00, 0x37730000)
No shared spaces configured.
VM Arguments:
jvm_args: -Xmx512M -Xms64M -Xverify:none -XX:JavaPriority10_To_OSPriority=10 -XX:JavaPriority9_To_OSPriority=9 -XX:MaxPermSize=256M -Xbootclasspath/p:../lib/lwawt.jar -Dsun.awt.keepWorkingSetOnMinimize=true -Dide.startingArg0=D:\Oracle\Middleware\jdeveloper\jdev\bin\jdev.exe -Dide.launcherProcessId=656 -Dide.config_pathname=D:\Oracle\Middleware\jdeveloper\jdev\bin\jdev.conf -Dide.startingcwd=D:\Oracle\Middleware\jdeveloper\jdev\bin -Dide.shell.enableFileTypeAssociation=D:\Oracle\Middleware\jdeveloper\jdev\bin\jdev.exe -Dide.pref.dir.base=D:\Documents and Settings\zhang\Application Data -Dide.work.dir.base=E:\zzw_Docs
java_command: <unknown>
Launcher Type: generic
Environment Variables:
JAVA_HOME=D:\Oracle\Middleware\jdk160_05
PATH=D:\app\zhang\product\11.1.0\db_1\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbem;D:\Program Files\ATI Technologies\ATI.ACE\;D:\Program Files\Microsoft SQL Server\80\Tools\BINN;D:\Oracle\Middleware\jdk160_05\bin;
USERNAME=zhang
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 14 Stepping 12, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows Server 2003 family Build 3790 Service Pack 2
CPU:total 2 (2 cores per cpu, 1 threads per core) family 6 model 14 stepping 12, cmov, cx8, fxsr, mmx, sse, sse2, sse3
Memory: 4k page, physical 2095172k(799352k free), swap 4194303k(2743628k free)
vm_info: Java HotSpot(TM) Client VM (10.0-b19) for windows-x86 JRE (1.6.0_05-b13), built on Feb 22 2008 01:16:53 by "java_re" with MS VC++ 7.1
time: Wed Jan 07 20:55:43 2009
elapsed time: 970 seconds

Screen flickers when running games in Windows XP

Okay, so I'm running Windows XP 32bit sp3 through Bootcamp. I have to say that Windows doesn't run perfectly through this, probably due to compatibility issues. I'm running a 24" iMac 2.33 GHz Intel Core 2 Duo with 2GB RAM and NVIDIA GeForce 7300 GT.
Basically, here's my issue
Screen starts to flicker when playing games, I'm guessing because it is somewhat graphic intensive. It starts happening gradually after playing for say, 20-30 minutes. Sometimes it gets so bad that it is impossible to even play. The screen might also start "tearing" if you understand my meaning. When I exit out of the game when it has been flickering for a while, the screen still flickers indefinitely afterward, not stopping. Restarting temporarily fixes the problem. I have tried various methods in attempt to fix this, including updating my graphic card drivers and even pressing the "Use inverse telecine" button under the Nividia Control panel. But all in all, nothing significant has changed and I haven't found a solution. My computer should be able to play the games, since I am far over their requirements (I am trying to play Battlefield 1942 and Battlefield Vietnam).

I set it to a minimum of 600 on ODD, 2500 on HDD, and 1700 on CPU and it seems to work pretty well, but right now I have it set to about 3500 HDD and 2200 CPU. At this moment in MAC OSX, my iMac's temperature has been at 88ºF for about 10 minutes since startup running Safari.
You can play around with it, but it might get a bit noisy as you put it higher. I haven't bothered too much with the ODD because I've been playing Battlefield 2 which doesn't require a CD with the newest patch.
The main thing I would pay attention to is CPU, since that is where games use a lot of energy.
Feel free to set the speeds at whatever you feel is good. Hope this helps!!!
Haha it took me forever to figure this thing out

PC restarts when running games since GTX 970 install

Hi all,
my PC build is 4 years old and has been stable until I replaced a Radeon 6950 with a GTX 970 last night. Am I missing something or is my card defective?
All drivers are up to date, and I used the GeForce Experience to "optimize" graphic settings in these games.
Crashes (sudden PC shutdown and restart) only occur occasionally, only when in-game:
Bioshock Infinite (in menu, once). Proceeded into gameplay (20 minutes) without problems.
Heroes of the Storm (in game, 3 times during a 2 hour session). Some games ran fine.
World of Warcraft (once, after tabbing back from the desktop).
Evolve (once, while one of the monster intro videos was playing).
PC Specs:
Windows 7
i5 2500k @ 3.3 (I previously had it a 4.4, but bumped it back down. Still crashing).
Asus P8Z68-V PRO/GEN3
MSI GeForce GTX 970 4GB Twin Frozr V
Corsair Vengeance 16GB (4 x 4GB) DDR3-1600
Crucial M4 128GB SSD
4 Hard Drives
Corsair Professional 850W Power Supply

Hi
Your motherboard running latest BIOS? Ask asus for this.
Is your RAM factory matched (all 4 slots in one box) or 2x 2x4GB ? Try with single RAM stick/kit.
Try to completely uninstall AMD drivers and nvidia. Then reinstall nvidia.
Install >>Driver Fusion<<
Go into Safe Mode, run Driver Fusion and remove all amd and nvidia drivers.
Reboot.
Install nvidia drivers. Then reboot and try again with games.

Gui is not showing when running program

This source code compiles with no errors in Borland 9, but when I run it, the GUI doesn't show up. I'm clueless, here is the code:
import java.util.Properties;
import javax.mail.internet.*;
import javax.mail.*;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
* Title: 
* Description: 
* Copyright: Copyright (c) 2003
* Company: 
* @author not attributable
* @version 1.0
public class SimpleSender{
JPanel jPanel1 = new JPanel();
JButton jButton1 = new JButton();
JButton jButton2 = new JButton();
JLabel jLabel1 = new JLabel();
JLabel jLabel2 = new JLabel();
JLabel jLabel3 = new JLabel();
JLabel jLabel4 = new JLabel();
JTextField jTextField1 = new JTextField();
JTextField jTextField2 = new JTextField();
JTextField jTextField3 = new JTextField();
JTextArea jTextArea1 = new JTextArea();
public SimpleSender() {
 try {
 jbInit();
 catch(Exception e) {
 e.printStackTrace();
private void jbInit() throws Exception {
 jTextArea1.setText("");
 jTextArea1.setLineWrap(true);
 jTextArea1.setWrapStyleWord(true);
 jTextArea1.setBounds(new Rectangle(9, 142, 382, 142));
 jTextField3.setText("");
 jTextField3.setBounds(new Rectangle(56, 99, 170, 22));
 jTextField2.setText("");
 jTextField2.setBounds(new Rectangle(40, 73, 183, 21));
 jTextField1.setText("");
 jTextField1.setBounds(new Rectangle(28, 43, 193, 21));
 jLabel4.setText("MESSAGE:");
 jLabel4.setBounds(new Rectangle(5, 126, 55, 15));
 jLabel3.setText("SUBJECT:");
 jLabel3.setBounds(new Rectangle(5, 102, 51, 15));
 jLabel2.setText("FROM:");
 jLabel2.setBounds(new Rectangle(7, 74, 34, 15));
 jLabel1.setText("TO:");
 jLabel1.setBounds(new Rectangle(9, 45, 20, 15));
 jButton2.setBounds(new Rectangle(88, 6, 77, 25));
 jButton2.setText("RECEIVE");
 jPanel1.setLayout(null);
 jButton1.setBounds(new Rectangle(8, 6, 73, 25));
 jButton1.setText("SEND");
 jButton1.addActionListener(new SimpleSender_jButton1_actionAdapter(this));
 jPanel1.add(jButton1, null);
 jPanel1.add(jButton2, null);
 jPanel1.add(jLabel1, null);
 jPanel1.add(jLabel4, null);
 jPanel1.add(jLabel3, null);
 jPanel1.add(jLabel2, null);
 jPanel1.add(jTextField1, null);
 jPanel1.add(jTextArea1, null);
 jPanel1.add(jTextField2, null);
 jPanel1.add(jTextField3, null);
public void mail() throws Exception {
 Properties props = System.getProperties();
 // Setup mail server
 props.put("mail.smtp.host", "smtp-server.cfl.rr.com");
 // Get session
 Session session = Session.getDefaultInstance(props, null);
 // Define message
 MimeMessage message = new MimeMessage(session);
 // Set the from address
 message.setFrom(new InternetAddress(jTextField2.getText()));
 // Set the to address
 message.addRecipient(Message.RecipientType.TO,
 new InternetAddress(jTextField1.getText()));
 // Set the subject
 message.setSubject(jTextField3.getText());
 // Set the content
 message.setText(jTextArea1.getText());
 // Send message
 Transport.send(message);
void jButton1_actionPerformed(ActionEvent e) {
 try{
 mail();
 }catch(Exception ex){System.out.println("Failed");}
public static void main(String args[]){
 new SimpleSender();
class SimpleSender_jButton1_actionAdapter implements java.awt.event.ActionListener {
SimpleSender adaptee;
SimpleSender_jButton1_actionAdapter(SimpleSender adaptee) {
 this.adaptee = adaptee;
public void actionPerformed(ActionEvent e) {
 adaptee.jButton1_actionPerformed(e);
}

You need to have a JFrame to add your components to.
For example, make your class extend JFrame and set your main panel the ContentPane (assuming that all your components have been added to this panel).
public class SimpleSender extends JFRame {
this.setContentPane(JPanel1);
this.setVisible(true);
}

Horrible glitches and dropouts when exporting tracks

hi there
I own Logic Express 9 running on Snow Leopard 10.6.1
when using the exporting tracks function I get random results, often ending up with unusable files with distortion and glitches - selecting the fx bypass option doesn't help.
this is really annoying and troublesome for my work.
can anyone help?
many thanks
Federico - Italy

In addition to the flex algorithms being disappointingly substandard in overall tc quality, flex tracks glitch constantly--especially if there are tempo changes or crossfades. You may be able to freeze them first and then export. AlternAtively, you could try tmelocking them and then using an alternate tempo map with a single tempo, then switching back after you flex tracks are bounced.

Laptop overheating and laging when playing games

Product: HP Elitebook 8540w Mobile WorkstationOS: Windows 8.1 (64 bit)DXDiag Hello! I am having a wierd problem on my laptop. When i am playing games, watching youtube or doing autocad my laptop is overheating. It does not turn off but its really really hot, sometimes i cant place my hand on. Laptop was like this when i buyed it, maybe its a little more now but thats normal. Also i noticed With AC and battery: Lagging when playing gamesWith AC and witout battery : Just a little lagWithout AC and with battery: Best performance Battery is on high performance and I do know that my laptop is not designed for gaming. But i can run some casual games like Dota or something like thatBut this is just wierd. I been on other forums and they told me to check my charger. Someone told me to check it. Maybe its using too much or dont provides enogh power for all parts. I noticed on my charger (which already got hot, i just turned on laptop and came here) Input 100-240v ~1.7A 50-60hz
Output 18.5v 3.5A 65w And on my laptop back it says Input 19Vdc 4.74A 3.5A into 4.74? Is that okay? Do i need a new charger? And if so which one should i buy? How much does it cost? Or is this because of something else?

I'll make a long story short. Your system is not built for Gaming as since it most likely doesn't have the hardware setup to allow for proper cooling of the system itself when pushed hard. It will handle game play but since it can't dissipate the thermal heat your system will itself take on the heat since it has no where to go.

Firefox 14 crashes on start up, in safe mode, trying to create new profile, after complete removal and reinstall, when run under different user

AdapterDeviceID: 0x2a02
AdapterVendorID: 0x8086
Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:14.0.1
BuildID: 20120713134347
CrashTime: 1342625511
EMCheckCompatibility: true
Email: (email removed)
FramePoisonBase: 7ffffffff0dea000
FramePoisonSize: 4096
InstallTime: 1342622791
Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a02GL Context? GL Context+ GL Layers? GL Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 1909
StartupTime: 1342625464
Theme: classic/1.0
Throttleable: 1
Vendor: Mozilla
Version: 14.0.1
This report also contains technical information about the state of the application when it crashed.
Deleted all of these and reinstalled
/Users/<user_acct>/Library/Application Support/Firefox/
/Users/<user_acct>/Library/Caches/Firefox/
/Users/<user_acct>/Library/Preferences/org.mozilla.firefox.plist
I have tried rebooting, running Disk Utility and repaired permissions, and checked I have admin privileges.
I have Reset Launch Services in Snow Leopard.
I have created a test account
System Preferences > Users & Groups create a "Test Account"
then tried launching FF from there = crash
I have installed FF 13.0.1
AdapterDeviceID: 0x2a02
AdapterVendorID: 0x8086
Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:13.0.1
BuildID: 20120614114901
CrashTime: 1342642579
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 7ffffffff0dea000
FramePoisonSize: 4096
InstallTime: 1342642540
Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a02GL Context? GL Context+ GL Layers? GL Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 26
StartupTime: 1342642569
Theme: classic/1.0
Throttleable: 1
URL: http://www.mozilla.org/en-US/firefox/13.0.1/firstrun/
Vendor: Mozilla
Version: 13.0.1
I have installed version 12 and
AdapterDeviceID: 0x2a02
AdapterVendorID: 0x8086
Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:12.0
BuildID: 20120420145725
CrashTime: 1342643047
EMCheckCompatibility: true
FramePoisonBase: 7ffffffff0dea000
FramePoisonSize: 4096
InstallTime: 1342643035
Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a02GL Context? GL Context+ GL Layers? GL Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
StartupTime: 1342643035
Theme: classic/1.0
Throttleable: 1
URL: http://www.mozilla.org/en-US/firefox/12.0/firstrun/
Vendor: Mozilla
Version: 12.0
no crash ids since this is version 3.6, the only version that doesn't crash, and I have to use Firefox for work stuff.
I have submitted over a hundred crash reports and included my email, but no one has ever contacted me with any help. This has been going on for weeks. I have been forced to use an outdated version of FF because no one has bother to get back to me. I would be happy to update to 14 and start the crash cycle again if someone wants to give me some suggestions I haven't tried already.
BTW, no font conflicts or RAM problems, (someone else's issue)

Maybe you did't understand my previous statement. There are no crashes in FF 3.6, There is no previous evidence FF 14 was ever here, I completely uninstalled all trace of Firefox, no app data, no preferences, no cache. I will upgrade to FF14 so I can send IDs,
so here ya go.
Crash ID: bp-fa9da320-92dc-47f7-afff-33e702120718
AdapterDeviceID: 0x2a02
AdapterVendorID: 0x8086
Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:14.0.1
BuildID: 20120713134347
CrashTime: 1342655269
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 7ffffffff0dea000
FramePoisonSize: 4096
InstallTime: 1342655256
Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a02GL Context? GL Context+ GL Layers? GL Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
StartupTime: 1342655256
Theme: classic/1.0
Throttleable: 1
URL: http://www.mozilla.org/en-US/firefox/14.0.1/whatsnew/?oldversion=rv:1.9.2.13
Vendor: Mozilla
Version: 14.0.1
This report also contains technical information about the state of the application when it crashed.

Query that becomes slower and slower when runned several times

Hi everybody,
I have an issue with one querie...
I have a select that is a join between 3 subqueries, 2 of them are using a function with pipeline.
When I run this query it work fine.
* First run lasts less than 1 sec.
* Second run lasts less than 1 sec.
* Third run lasts 2 sec.
* Fourth run lasts 2 min.
* Fifth run lasts 10 min.
* ... and then worse an worse...
Of course, I always use same bind variables and data within the database does not change.
I looked at the execution plan that seems to be the same for all the runs.
The problem is during the Execute phase :
for the first run :
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.20 0.20 0 1215 0 0
Fetch 3 0.12 0.14 0 246 0 19
total 5 0.33 0.36 0 1461 0 19
Misses in library cache during parse: 1
Misses in library cache during execute: 1
Optimizer mode: ALL_ROWS
Parsing user id: 66
for the fifth run
call count cpu elapsed disk query current rows
Parse 1 0.01 0.01 0 0 0 0
Execute 1 95.29 100.96 0 1215 0 0
Fetch 3 0.27 0.39 0 246 0 19
total 5 95.57 101.36 0 1461 0 19
Misses in library cache during parse: 1
Misses in library cache during execute: 1
Optimizer mode: ALL_ROWS
Parsing user id: 66
I didn't find dynamic sampling during the execution plan.
All subqueries are very stable in time.
When the join query starts to have a strange behavior, subqueries are still very perfomant !
If I flush the shared pool, the problem disappear and the cycle restarts...
1) any idea of the root cause of the issue ?
2) is there a solution (with hint for instance) for not recording the query inthe shared pool ?
Thanks in advance...
The query is :
select
a.anneefiscale,
a.marque,
a.priorite,
a.de,
b.eng_et_real_total "eng et real annee moins 1",
c.estime "estime",
a.engage_nip "engage nip",
a.engage_autre "engage autre",
a.engage_total "engage total",
a.realise_nip "realise nip",
a.realise_autre "realise autre",
a.realise_total "realise total",
a.eng_et_real_nip "eng et real nip",
a.eng_et_real_autre "eng et real autre",
a.eng_et_real_total "eng et real total",
decode(c.estime,0,NULL,round(a.eng_et_real_total/c.estime*100,1)) "pourcentage"
from
select
anneefiscale,
marque,
priorite,
de,
round(sum(engage_nip)) engage_nip,
round(sum(engage_autre)) engage_autre,
round(sum(engage_nip)+sum(engage_autre)) engage_total,
round(sum(realise_nip)) realise_nip,
round(sum(realise_autre)) realise_autre,
round(sum(realise_nip)+sum(realise_autre)) realise_total,
round(sum(engage_nip)+sum(realise_nip)) eng_et_real_nip,
round(sum(engage_autre)+ sum(realise_autre)) eng_et_real_autre,
round(sum(engage_nip)+sum(engage_autre)+sum(realise_nip)+sum(realise_autre)) eng_et_real_total
from
select * from table(mypackage.reporting_tbordmarque_promo(:P50_RESEAU,:P50_DE,:P50_GROUPE,:P50_ANNEE_FISCALE))
union
select * from table(mypackage.reporting_tbordmarque_nip(:P50_RESEAU,:P50_DE,:P50_GROUPE,:P50_ANNEE_FISCALE))
union
select * from table(mypackage.reporting_tbordmarque_eng(:P50_RESEAU,:P50_DE,:P50_GROUPE,:P50_ANNEE_FISCALE))
group by anneefiscale, marque, priorite, de
) a,
select
anneefiscale,
marque,
de,
round(sum(engage_nip)+sum(engage_autre)+sum(realise_nip)+sum(realise_autre)) eng_et_real_total
from
select * from table(mypackage.reporting_tbordmarque_promo(:P50_RESEAU,:P50_DE,:P50_GROUPE,mypackage.get_previous_annee_fiscale(:P50_ANNEE_FISCALE)))
union
select * from table(mypackage.reporting_tbordmarque_nip(:P50_RESEAU,:P50_DE,:P50_GROUPE,mypackage.get_previous_annee_fiscale(:P50_ANNEE_FISCALE)))
union
select * from table(mypackage.reporting_tbordmarque_eng(:P50_RESEAU,:P50_DE,:P50_GROUPE,mypackage.get_previous_annee_fiscale(:P50_ANNEE_FISCALE)))
group by anneefiscale, marque, de
) b,
select
annee_fiscale.nom anneefiscale,
marque.nom marque,
de.nom de,
round(sum(montant)) estime
from
estime,
annee_fiscale,
marque,
enseigne,
groupe,
de,
reseau
where
estime.id_annee_fiscale_fk = annee_fiscale.id_annee_fiscale and
estime.id_marque_fk = marque.id_marque and
estime.id_enseigne_fk = enseigne.id_enseigne and
estime.id_type_estime_fk = :P50_TYPE_ESTIME and
enseigne.id_groupe_fk = groupe.id_groupe and
groupe.id_de_fk = de.id_de and
de.id_reseau_fk = reseau.id_reseau and
(:P50_ANNEE_FISCALE is NULL OR :P50_ANNEE_FISCALE=0 OR estime.id_annee_fiscale_fk = :P50_ANNEE_FISCALE) and
(:P50_RESEAU is NULL OR :P50_RESEAU=0 OR reseau.id_reseau = :P50_RESEAU) and
(:P50_DE is NULL OR :P50_DE=0 OR de.id_de = :P50_RESEAU)
group by annee_fiscale.nom, marque.nom, de.nom
) c
where
a.marque=b.marque(+) and a.de=b.de(+) and
a.marque=c.marque(+) and a.de=c.de(+)
order by
a.anneefiscale, a.marque, a.de;
Edited by: user7499092 on 17 nov. 2012 05:50
Edited by: user7499092 on 17 nov. 2012 05:50

Hi Nikolay
Concerning point 2, the database seems perfectly OK and I encountered an issue only with this query :-(
The database is hosted on a dedicated server and I am the only one user. Moreover the issue is reproducible as I want... Very strange for me...
I am very interested on a method to check waits and more precisely IO waits. Can you describe me a procedure ?
The only one thing I can produce is the tkprof output focused on the fifth run that is very long...
TKPROF: Release 11.2.0.1.0 - Development on Sat Nov 17 04:45:56 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Trace file: MYDB_ora_3493.trc
Sort options: default
count    = number of times OCI procedure was executed
cpu      = cpu time in seconds executing
elapsed = elapsed time in seconds executing
disk     = number of physical reads of buffers from disk
query    = number of buffers gotten for consistent read
current = number of buffers gotten in current mode (usually for update)
rows     = number of rows processed by the fetch or execute call
select
a.anneefiscale,
a.marque,
a.priorite,
a.de,
b.eng_et_real_total "eng et real annee moins 1",
c.estime "estime",
a.engage_nip "engage nip",
a.engage_autre "engage autre",
a.engage_total "engage total",
a.realise_nip "realise nip",
a.realise_autre "realise autre",
a.realise_total "realise total",
a.eng_et_real_nip "eng et real nip",
a.eng_et_real_autre "eng et real autre",
a.eng_et_real_total "eng et real total",
decode(c.estime,0,NULL,round(a.eng_et_real_total/c.estime*100,1)) "pourcentage"
from
select
anneefiscale,
marque,
priorite,
de,
round(sum(engage_nip)) engage_nip,
round(sum(engage_autre)) engage_autre,
round(sum(engage_nip)+sum(engage_autre)) engage_total,
round(sum(realise_nip)) realise_nip,
round(sum(realise_autre)) realise_autre,
round(sum(realise_nip)+sum(realise_autre)) realise_total,
round(sum(engage_nip)+sum(realise_nip)) eng_et_real_nip,
round(sum(engage_autre)+ sum(realise_autre)) eng_et_real_autre,
round(sum(engage_nip)+sum(engage_autre)+sum(realise_nip)+sum(realise_autre)) eng_et_real_total
from
    select * from table(mypackage.reporting_tbordmarque_promo(:P50_RESEAU,:P50_DE,:P50_GROUPE,:P50_ANNEE_FISCALE))
    union
    select * from table(mypackage.reporting_tbordmarque_nip(:P50_RESEAU,:P50_DE,:P50_GROUPE,:P50_ANNEE_FISCALE))
    union
    select * from table(mypackage.reporting_tbordmarque_eng(:P50_RESEAU,:P50_DE,:P50_GROUPE,:P50_ANNEE_FISCALE))
group by anneefiscale, marque, priorite, de
) a,
select
anneefiscale,
marque,
de,
round(sum(engage_nip)+sum(engage_autre)+sum(realise_nip)+sum(realise_autre)) eng_et_real_total
from
    select * from table(mypackage.reporting_tbordmarque_promo(:P50_RESEAU,:P50_DE,:P50_GROUPE,mypackage.get_previous_annee_fiscale(:P50_ANNEE_FISCALE)))
    union
    select * from table(mypackage.reporting_tbordmarque_nip(:P50_RESEAU,:P50_DE,:P50_GROUPE,mypackage.get_previous_annee_fiscale(:P50_ANNEE_FISCALE)))
    union
    select * from table(mypackage.reporting_tbordmarque_eng(:P50_RESEAU,:P50_DE,:P50_GROUPE,mypackage.get_previous_annee_fiscale(:P50_ANNEE_FISCALE)))
group by anneefiscale, marque, de
) b,
select
    annee_fiscale.nom anneefiscale,
    marque.nom marque,
    de.nom de,
    round(sum(montant)) estime
from
    estime,
    annee_fiscale,
    marque,
    enseigne,
    groupe,
    de,
    reseau
where
    estime.id_annee_fiscale_fk = annee_fiscale.id_annee_fiscale and
    estime.id_marque_fk = marque.id_marque and
    estime.id_enseigne_fk = enseigne.id_enseigne and
    estime.id_type_estime_fk = :P50_TYPE_ESTIME and
    enseigne.id_groupe_fk = groupe.id_groupe and
    groupe.id_de_fk = de.id_de and
    de.id_reseau_fk = reseau.id_reseau and
    (:P50_ANNEE_FISCALE is NULL OR :P50_ANNEE_FISCALE=0 OR estime.id_annee_fiscale_fk = :P50_ANNEE_FISCALE) and
    (:P50_RESEAU is NULL OR :P50_RESEAU=0 OR reseau.id_reseau = :P50_RESEAU) and
    (:P50_DE is NULL OR :P50_DE=0 OR de.id_de = :P50_RESEAU)
    group by annee_fiscale.nom, marque.nom, de.nom
) c
where
a.marque=b.marque(+) and a.de=b.de(+) and
a.marque=c.marque(+) and a.de=c.de(+)
order by
a.anneefiscale, a.marque, a.de
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.01       0.01          0          0          0           0
Execute      1     95.29     100.96          0       1215          0           0
Fetch        3      0.27       0.39          0        246          0          19
total        5     95.57     101.36          0       1461          0          19
Misses in library cache during parse: 1
Misses in library cache during execute: 1
Optimizer mode: ALL_ROWS
Parsing user id: 66
Rows     Row Source Operation
     19 SORT ORDER BY (cr=55154 pr=0 pw=0 time=0 us cost=39985 size=175631625 card=60045)
     19   HASH JOIN RIGHT OUTER (cr=55154 pr=0 pw=0 time=234 us cost=3348 size=175631625 card=60045)
     19    VIEW (cr=246 pr=0 pw=0 time=198 us cost=52 size=6233 card=23)
     19     HASH GROUP BY (cr=246 pr=0 pw=0 time=108 us cost=52 size=1932 card=23)
    230      HASH JOIN (cr=246 pr=0 pw=0 time=801 us cost=51 size=1932 card=23)
    230       HASH JOIN (cr=238 pr=0 pw=0 time=114 us cost=48 size=1633 card=23)
    230        HASH JOIN (cr=230 pr=0 pw=0 time=1259 us cost=45 size=1265 card=23)
     28         NESTED LOOPS (cr=8 pr=0 pw=0 time=999 us)
     28          NESTED LOOPS (cr=7 pr=0 pw=0 time=135 us cost=8 size=297 card=9)
      4           NESTED LOOPS (cr=5 pr=0 pw=0 time=39 us cost=5 size=75 card=3)
      1            TABLE ACCESS FULL DE (cr=3 pr=0 pw=0 time=0 us cost=4 size=18 card=1)
      4            TABLE ACCESS BY INDEX ROWID GROUPE (cr=2 pr=0 pw=0 time=33 us cost=1 size=49 card=7)
      4             INDEX RANGE SCAN GROUPE_DE_FK (cr=1 pr=0 pw=0 time=18 us cost=0 size=0 card=7)(object id 69080)
     28           INDEX RANGE SCAN ENSEIGNE_GROUPE_FK (cr=2 pr=0 pw=0 time=48 us cost=0 size=0 card=3)(object id 69079)
     28          TABLE ACCESS BY INDEX ROWID ENSEIGNE (cr=1 pr=0 pw=0 time=0 us cost=1 size=24 card=3)
    852         TABLE ACCESS FULL ESTIME (cr=222 pr=0 pw=0 time=1337 us cost=37 size=11638 card=529)
      7        VIEW index$_join$_013 (cr=8 pr=0 pw=0 time=18 us cost=3 size=112 card=7)
      7         HASH JOIN (cr=8 pr=0 pw=0 time=18 us)
      7          INDEX FAST FULL SCAN ANNEE_FISCALE_CON (cr=4 pr=0 pw=0 time=6 us cost=1 size=112 card=7)(object id 68294)
      7          INDEX FAST FULL SCAN ANNEE_FISCALE_PK (cr=4 pr=0 pw=0 time=6 us cost=1 size=112 card=7)(object id 68293)
     35       VIEW index$_join$_014 (cr=8 pr=0 pw=0 time=340 us cost=3 size=455 card=35)
     35        HASH JOIN (cr=8 pr=0 pw=0 time=272 us)
     35         INDEX FAST FULL SCAN MARQUE_PK (cr=4 pr=0 pw=0 time=0 us cost=1 size=455 card=35)(object id 68321)
     35         INDEX FAST FULL SCAN MARQUE_UK (cr=4 pr=0 pw=0 time=102 us cost=1 size=455 card=35)(object id 68322)
     19    HASH JOIN RIGHT OUTER (cr=54908 pr=0 pw=0 time=216 us cost=3295 size=159359430 card=60045)
     19     VIEW (cr=28629 pr=0 pw=0 time=666 us cost=94 size=6640584 card=24504)
     19      HASH GROUP BY (cr=28629 pr=0 pw=0 time=504 us cost=94 size=7743264 card=24504)
     41       VIEW (cr=28629 pr=0 pw=0 time=80 us cost=92 size=7743264 card=24504)
     41        SORT UNIQUE (cr=28629 pr=0 pw=0 time=40 us cost=92 size=49008 card=24504)
     42         UNION-ALL (cr=28629 pr=0 pw=0 time=1066 us)
     11          COLLECTION ITERATOR PICKLER FETCH REPORTING_TBORDMARQUE_PROMO (cr=13107 pr=0 pw=0 time=230 us cost=29 size=16336 card=8168)
     18          COLLECTION ITERATOR PICKLER FETCH REPORTING_TBORDMARQUE_NIP (cr=14242 pr=0 pw=0 time=136 us cost=29 size=16336 card=8168)
     13          COLLECTION ITERATOR PICKLER FETCH REPORTING_TBORDMARQUE_ENG (cr=1280 pr=0 pw=0 time=84 us cost=29 size=16336 card=8168)
     19     VIEW (cr=26279 pr=0 pw=0 time=162 us cost=94 size=58393032 card=24504)
     19      HASH GROUP BY (cr=26279 pr=0 pw=0 time=36 us cost=94 size=56800272 card=24504)
     42       VIEW (cr=26279 pr=0 pw=0 time=123 us cost=92 size=56800272 card=24504)
     42        SORT UNIQUE (cr=26279 pr=0 pw=0 time=82 us cost=92 size=49008 card=24504)
     42         UNION-ALL (cr=26279 pr=0 pw=0 time=328 us)
     13          COLLECTION ITERATOR PICKLER FETCH REPORTING_TBORDMARQUE_PROMO (cr=12209 pr=0 pw=0 time=72 us cost=29 size=16336 card=8168)
     19          COLLECTION ITERATOR PICKLER FETCH REPORTING_TBORDMARQUE_NIP (cr=13006 pr=0 pw=0 time=108 us cost=29 size=16336 card=8168)
     10          COLLECTION ITERATOR PICKLER FETCH REPORTING_TBORDMARQUE_ENG (cr=1064 pr=0 pw=0 time=36 us cost=29 size=16336 card=8168)
SQL ID: cb21bacyh3c7d
Plan Hash: 3452538079
select metadata
from
kopm$ where name='DB_FDO'
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.00       0.00          0          0          0           0
Fetch        1      0.00       0.00          0          2          0           1
total        3      0.00       0.00          0          2          0           1
Misses in library cache during parse: 0
Optimizer mode: CHOOSE
Parsing user id: SYS   (recursive depth: 1)
Rows     Row Source Operation
      1 TABLE ACCESS BY INDEX ROWID KOPM$ (cr=2 pr=0 pw=0 time=0 us cost=1 size=108 card=1)
      1   INDEX UNIQUE SCAN I_KOPM1 (cr=1 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 553)
etc etc etc etc etc
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.01       0.01          0          0          0           0
Execute      1     95.29     100.96          0       1215          0           0
Fetch        3      0.27       0.39          0        246          0          19
total        5     95.57     101.36          0       1461          0          19
Misses in library cache during parse: 1
Misses in library cache during execute: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse       16      0.01       0.00          0          0          0           0
Execute     23      0.02       0.03          1          5         26           2
Fetch       33      0.67       0.74          0      54935          0        1447
total       72      0.70       0.79          1      54940         26        1449
Misses in library cache during parse: 2
Misses in library cache during execute: 2
   13 user SQL statements in session.
   11 internal SQL statements in session.
   24 SQL statements in session.
Trace file: MYDB_ora_3493.trc
Trace file compatibility: 11.1.0.7
Sort options: default
       1 session in tracefile.
      13 user SQL statements in trace file.
      11 internal SQL statements in trace file.
      24 SQL statements in trace file.
      12 unique SQL statements in trace file.
     485 lines in trace file.
     176 elapsed seconds in trace file.Edited by: easyoups on Nov 19, 2012 6:50 AM

Impact on physcial machines and network when running Capacity Planner.

I need to find a white paper or an app note that explains how Capacity Planner collects data from physical machines. I seem to have been pulled into the middle of a squabble between IT staff members that has the manager halting a virtualization project. I have a virtual server running the Collector for Capacity Planner for 157 machines discovered in the customers network. The Collector has been working fine, I am getting the inventory data I need to get on all systems except one. At the request of the customer, I disabled the host name mask so we could see real host names in the report. I also disabled the WMI checking since it only worked on half of my customers machines. Using the Registry setting has gotten the inventory on all machines except one. This one machine (an email server) has very strict administration control that is preventing the Collector service user from connecting. When my contact and I tried to gain the needed access, our project was halted because the email server admin report an enormous amount of connection attempts from the Collection server that caused an issue with the mail server (was never able to get specifics on the issue). This caused the manager to error on the side of caution and halt the project since the mail server admin believed the Collector caused his server issues. My contact and I will be removing the mail server from the virtualization project, but to get the manager to allow the project to continue, I need to put something in her hands that explains how the Collector is getting it's data. I have tried my self explaining it, but she is insisting on something from VMWare that explains how the collector is getting the data. I know it is active collection, and as far as I know it just uses the built in WMI or Remote Registry services to request monitoring data that causes no impact to system performance. I will be searching for an app note or a white paper or a KB article today, I would greatly appreciate if someone already knows of something that can settle this argument for me and help me get this project back on track.
thank you

Almost same setting here, same troubles.
If I restart them via Screen Sharing via the Restart Button on the Login Window, they sometimes show up correctly. But this is way too annoying.

Errors on an executable (and not when running during the development process) J1939 related

I've got the J1939 protocol up and running on
Labview 8.5... though when I create an executable it gives me these
following errors upon start-up...see jpg.
Is this related to something I need to include withint the Build? or Installer?
Also, why is it that when I go to include the NI 2.6.3 CAN installer within the Installer EXE, that it asks for a CRIO disk?
Thanks...

Hey Jonathanupr,
It looks to me like you did not configure your LabVIEW Executable's build specifications appropriately. Please go back and check the specifications to make sure that you've included your higher-level VI and all of the sub-VIs used in the J1939 protocol download (I'm assuming you downloaded the libraries from our website) in the project. Then, within your Build Specification, make sure your higher-level VI is included in the Startup VIs section on the Source Files tab and the J1939 library files are included in the "Always Included" portion of the Source Files tab.
If your CAN driver is asking for the cRIO disk, it could be associating that with the original download location of the driver. You could try first uninstalling the driver, then download the driver to a location on your hard disk (either from our website or from your CD). After installing the driver from a hard-disk location, the driver should no longer be associated with a CD, but with the location on your hard disk.
Here are two KnowledgeBase Articles that talk about this issue.
KB 3S88PJMY: Why do I get a "Missing Distribution" or "Distributions Needed" Error When Trying to Bu...
KB 3TCBS9MY: How do I Stop the Missing Distribution Notification Each Time I Build an Installer?
Derrick S.
Product Manager
NI DIAdem
National Instruments

Clicks and pops when running Mainstage 2 with Guitar Rig 5 in Mavericks.

**I've read that this may be unsolvable but I hope someone can help me**
Hello everyone,
I very recently upgraded to the new Macbook Pro 15" Retina as my 2010 Macbook running Snow Leopard is on it's way to Apple heaven. This means I am now on Mavericks and **** is ******, it's my fault for not upgrading sooner so I am to blame in some respects. Here is my issue.
My set up is fairly basic:
Mainstage 2.2.2 (I can't upgrade to 3 as the synths we use are not 64bit compatible.. another nightmare due to my lack of upgrading in the past)
Axiom 64 MIDI controller via USB
Guitar Rig 5 controller via USB (audio interface)
In Mainstage we have the L output for virtual instrument parts and the R output for guitar parts. These are globally panned L and R.
The L output from Mainstage goes through the Guitar rig footcontroller out the L output through a DI and then to the mixing desk. The R output goes through the Guitar rig controller out the R output and straight to the guitar amp. Simple way to do both keys and guitar.
We never had any problems with this in Snow Leopard. With Mavericks this setup is unusable due to the clicks and pops shooting through the guitar amp. It doesn't matter whether the voume on the guitar itself is turned up or down it's still all "click POP.. CLICK pop pop click" Mainstage just seems to be sending these pops regardless if anything is being played or not.
When I ran the same session through my Focusrite Saffire Pro 24 there was no popping on the virtual instruments so I'm thinking it could be a guitar rig issue.
Can anyone help me with this? I'm sure a lot of people are finding the same thing... **** I know a lot of people are getting the pops without guitar rig involved. For now I'm going to continue to use my old Macbook but I'd LOVE to have the new one running smoothly!
Thanks a lot!

**I've read that this may be unsolvable but I hope someone can help me**
Hello everyone,
I very recently upgraded to the new Macbook Pro 15" Retina as my 2010 Macbook running Snow Leopard is on it's way to Apple heaven. This means I am now on Mavericks and **** is ******, it's my fault for not upgrading sooner so I am to blame in some respects. Here is my issue.
My set up is fairly basic:
Mainstage 2.2.2 (I can't upgrade to 3 as the synths we use are not 64bit compatible.. another nightmare due to my lack of upgrading in the past)
Axiom 64 MIDI controller via USB
Guitar Rig 5 controller via USB (audio interface)
In Mainstage we have the L output for virtual instrument parts and the R output for guitar parts. These are globally panned L and R.
The L output from Mainstage goes through the Guitar rig footcontroller out the L output through a DI and then to the mixing desk. The R output goes through the Guitar rig controller out the R output and straight to the guitar amp. Simple way to do both keys and guitar.
We never had any problems with this in Snow Leopard. With Mavericks this setup is unusable due to the clicks and pops shooting through the guitar amp. It doesn't matter whether the voume on the guitar itself is turned up or down it's still all "click POP.. CLICK pop pop click" Mainstage just seems to be sending these pops regardless if anything is being played or not.
When I ran the same session through my Focusrite Saffire Pro 24 there was no popping on the virtual instruments so I'm thinking it could be a guitar rig issue.
Can anyone help me with this? I'm sure a lot of people are finding the same thing... **** I know a lot of people are getting the pops without guitar rig involved. For now I'm going to continue to use my old Macbook but I'd LOVE to have the new one running smoothly!
Thanks a lot!

2 error, one on compile and other when run.

i purchase the book Java 6 in 21 day, nice book, when i compile "javac" appaer this mssg:
error: Class names, 'HelloWorld, are only accepted if annotation processing is explicitly requested
1 error i copy and paste the helloworld code from another thread in this forums.
i download example from the sun java web page and when i run this mssg:
Exeption in thread "main" java.lang.NoClassDefFoundError: ButtonFramei set-up in the windows environment variables this:
ClassPath C:\java\jdk\1.6.0_01\lib\tools.jar
path c:\java\jdk1.6.0_01\bin
C:\>java -version
java version "1.6.0_01"
Java(TM) SE Runtime Environment (build 1.6.0_01-b06)
Java HotSpot(TM) Client VM (build 1.6.0_01-b06, mixed mode, sharing)
Thanks in advanced.

DrLaszloJamf wrote:
in [this recent thread|http://forum.java.sun.com/thread.jspa?threadID=5306639] I was wondering what the average age is, of the books I refer to the most. The Bible skews it a bit, 'natch.
This is totally off-topic (sorry), but I just happened to be rereading a wonderful book called [The Discoverers|http://www.amazon.com/Discoverers-Daniel-J-Boorstin/dp/0394726251/ref=pd_bbs_sr_1?ie=UTF8&s=books&qid=1213913220&sr=8-1] by Daniel J. Boorstin, and I'm right now in the chapter where he describes how the printing press revolutionized Europe in the 16th and 17th centuries. The book was published in 1983 before the internet revolution, so there are no mention regarding possible parallels with Web publishing, but nevertheless, it is one of the best books I have ever read. Extremely highly recommended, or as one reviewer put it: "Perhaps the greatest book by one of our greatest historians".

GUI glitching and blinking when running games

Similar Messages

Maybe you are looking for