GUI JAVA 7.20 rev.2 (on Mac OSX 10.6.3): Print preview does not work!

I've just started using rev 2 of java sapgui and print preview is not working anymore.
Client: OSX 10.6.3
SAP: ERP5.0 on WAS 640
Has anyone experienced the same problem?

This is the output in console when print-previewing:
I'm going to open a support message as adviced.
<code>
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]     Exception in thread "Loader for htmlViewer8_XZ_7" java.lang.NullPointerException
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at com.sap.plaf.frog.FrogListUI.updateColors(FrogListUI.java:63)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at com.sap.plaf.frog.FrogListUI.propertyChange(FrogListUI.java:48)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:339)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:276)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.beans.PropertyChangeSupport.firePropertyChange(PropertyChangeSupport.java:318)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at java.awt.Component.firePropertyChange(Component.java:8233)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at javax.swing.JComponent.firePropertyChange(JComponent.java:4428)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at javax.swing.JComponent.setEnabled(JComponent.java:2638)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.ActionsPanel.setEnabled(ActionsPanel.java:418)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.ActionsPanel.<init>(ActionsPanel.java:106)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.AnnotationPanel.setGUI(AnnotationPanel.java:128)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.annotation.AnnotationPanel.<init>(AnnotationPanel.java:73)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildAnnotationPanel(SwingViewBuilder.java:1574)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildUtilityTabbedPane(SwingViewBuilder.java:1541)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildUtilityAndDocumentSplitPane(SwingViewBuilder.java:1501)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildContents(SwingViewBuilder.java:499)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at org.icepdf.ri.common.SwingViewBuilder.buildViewerPanel(SwingViewBuilder.java:482)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.pilots.pdf.ThePilot.createComponent(ThePilot.java:149)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.Viewport.setPilot(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.StormBase.append(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.StormBase.do_clear_content(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.StormBase.do_render_content(VCDO)
04/05/10 10.45.41     [0x0-0x3e63e6].com.sap.platin[6491]          at ice.storm.Viewport.runAsynchronousLoad(VCDO)
</code>
Edited by: Lorenzo Nicora on May 4, 2010 10:52 AM

Similar Messages

  • I am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in  applications) i decide to delete it. I could not remove it from launchpad . i need urgent help

    i am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in  applications) i decide to delete it. I could not remove it from launchpad . i need urgent help from your side.

    Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
    You generally have to reboot in order to complete an uninstallation.
    If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse.

  • I have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

    i have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

    Hi guillermospain,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network
    http://support.apple.com/kb/ht3500
    OS X Mountain Lion: Set up a printer
    http://support.apple.com/kb/PH11145
    OS X Mountain Lion: Reset the printing system
    http://support.apple.com/kb/PH11143
    Cheers,
    - Judy

  • I have a Power Mac G5 quad core (2006) and it does not work.

    I have a Power Mac G5 Quad core (2006) and it does not work.The status light flashes twice and the fans blow full blast. The display does not show anything. Does anybody know what is wrong with my mac.

    Can you count the beeps or flashes?
    1 beep = no RAM installed
    2 beeps = incompatible RAM types
    3 beeps = no good banks
    4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
    5 beeps = processor is not usable
    In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
    Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
    http://support.apple.com/kb/HT1547
    Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
    See which one your G5 has, should be the 1st one ..
    http://eshop.macsales.com/item/Newer%20Technology/CR2032/ 
    http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/ 
    If you're sure the RAM is good, try the Hair Dryer trick...
    http://discussions.apple.com/message.jspa?messageID=13240047#13240047
    https://discussions.apple.com/message/15223603#15223603
    https://discussions.apple.com/message/15499912#15499912
    https://discussions.apple.com/message/15613068#15613068
    https://discussions.apple.com/thread/3270112
    https://discussions.apple.com/message/16053892#16053892
    No power light at all...
    https://discussions.apple.com/thread/3692775?tstart=0
    It can show on any G5, and even many other computers & electronic devices of the period.
    http://www.macintouch.com/reliability/pmg5.html
    http://lowendmac.com/ppc/power-macintosh-g5.html
    And see this last one in particular...
    https://discussions.apple.com/message/16781690#16781690
    Heat gun better...
    https://discussions.apple.com/thread/3916312?tstart=0

  • Hp 2727nf printer driver does not work in osx 10.7, hp 2727nf printer driver does not work in osx 10.7

    hp laserjet 2727 nf driver in osx lion does not work, It crashes the application and sends an error message?

    Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having some issues with adjusting the power save mode settings on your Laserjet P1606dn. I can help with that. First make sure the printer is plugged directly into a wall outlet and not a surge protector. If the printer is connected with an ethernet cable to a router then you may be able to do this instead:On the printer hold down the button that looks like a sheet of paper with an arrow on it for about ten seconds. This should print out a report.On your Mac open a browser and enter the printer's IP Address in your Address bar exactly as it appears on the page. When you are finished click on enter/return.This will open the printer's Embedded Web Server. In here you may be able to find some options to adjust the power save settings.If the above does not work then this troubleshooting may assist you with the utility:Go to Applications, and if you have it open the Hewlett-Packard folder.Run HP Uninstaller to remove any existing software from you system.On the Mac go to the Apple icon and Sytem Preferences.Open Printers and Scanners.Hold down the Command key and click on the picture of your printer on the left.Click on Reset Printing System.Go to Applications and Utilities.Open Disk Utility.Click on Macintosh HD on the left.Click on Verify Disk Permissions. This should take about ten minutes.Click on Repair Disk Permissions. This should take about ten minutes.Restart your Mac.Plug in the USB cable between the printer and the router.Check for Product Updates on your Mac.Try running the tool again.If this resolves everything please let others know by clicking on Accept as Solution below my post.
    I hope this helps and I hope you have a great day! 

  • After update Mac OS 10.9.1 Trim Enabler does not work anymore!

    After updating from Mac OS 10.9.0 to 10.9.1 the program Trim Enabler does not work anymore and my 4 SSDs from Samsung and Kingston are no longer supported.
    What can I do?
    Should I scrap my SSDs?
    Why does Apple do such things?
    Will Apple that I switch to Windows? There Trim works with all SSDs and BluRay will not boycott!

    Apple does not support TRIM for SSDs that were not factory
    installed and TRIM Enabler is a hack to get around this.  Any
    hack is always subject to being disabled, or worse, with any
    system update whether it is OSX or Windows.

  • My Mac App Store on my MacBook Pro does not work properly.

    My Mac App Store on my MacBook Pro 15 inch does not work properly. When i go on to the app store, my wi-fi resets and then my app store quits. Why is this? How can i fix this problem? Please Help

    Back up all your files, on boot up when you first press the power button, press CMd and r and keep pressing until you get something apart from a apple logo. Then click reinstall Mac OS X or something like that. You may be prompted to insert your disk.
    Good luck

  • Dell u2410 with mac book pro - ports in the monitor does not work....

    Hi,
    I got a DELL u2410 with my mac book pro and the reader or the USB port is not working. How come the laptop doesnt detect this even if the screen works?

    Not seen the 2410 - but previous USB devices in the screens required a standard A-B usb cable from the computer to the screen - look for the squarish USB socket on the monitor somewhere, probably tucked up under the lip where all the connectors push in vertically upwards (on previous Dell WS screens)

  • OSX 10.8.2 dashboard dictionary does not work

    I am trying to use the dictionary widget on the dashboard for mac 10.8.2.
    when i search for word and hit enter, a small little grey shape comes up below the widget, instead of revealing the info i am after.
    I have remove the widget from the dashboard and readded it, and it still doesnt work. I have only had this brand new computer since November 2012.
    This is what happens when i search for a word, in either dictionary, thesaurus or apple mode.
    Please help! Much appreciated.

    in Terminal:
    rm Library/Preferences/widget-com.apple.widget.dictionary.plist
    killall Dock
    You're welcome.

  • Premiere Pro CS5 - Mac Pro - The eye dropper color picker does not work properly

    The eye dropper will not pick up on the colors that are hovered over. Instead, the selected color is offset. The best I can figure out is that I'm experiencing a vertical downward offset of about +/-150 pixels and a horizontal offset to the right of about +/-5 pixels.
    Does anyone have the same issue and if so have you found a solution?

    Yes, that appears to be the problem. I disconnected my secondary monitor (which does have a different vertical resolution) and the eyedropper appears to function properly.
    Okay, so now I know the cause of the issue. However, disconnecting and reconnecting monitors is not an acceptable workflow. Apparently this problem affects quite a few Premiere Pro CS5 Mac users with dual monitors since you referred to it as a know issue with all versions of Mac OS. Do you know if there is an update (not an upgrade) for Premiere Pro CS5 to address this?  
    Thanks.

  • MAC Photoshop Elements 4- Making Text Smooth Does not work?

    I have tried to search the forums and help maual, but to do avail so I am adding another topic, Although I have anit-aliased on, the text still seems fuzzy, what can I do?

    Did you resize the image after adding the text? Or use the move tool to drag the text larger after simplifying it?
    If not, try deleting prefs: quit PE, then restart while holding down command+shift+option. Say yes when you see the dialog box asking if you want to delete the settings. This won't help existing text, but if there was something wrong with the text tool it should clear it up for new text.

  • I upgraded my Mac Pro to Yosemite and now CS5 does not work.

    Help.....Adobe Photoshop CS5 does not load now that I upgraded my MacPro to yosemite....anybody have this problem and how was it fixed?

    Yes. The Yosemite upgrade is notorious for damaging CS5 installs. Please reinstall and let us know how it goes.
    Also make sure Yosemite is upgraded to 10.10.1
    The reinstall will set your instal to 12.0.0  If Help > Updates does not work, go here Adobe - Photoshop : For Macintosh
    download and apply the updates for Photoshop and Adobe Camera Raw.
    Gene

  • One mac, two users, same Quicken - shared file does not work.

    As stated I have two users, both administrators, on the one machine and I can not find a way to allow read/write access to the one quicken account. How do I set this up correctly. I do have an external firewire hard drive set up to allow access to photo and media files. If that is my only option to have permissions ignored, what part of Quicken files do I set up on the external? ?only the backup? Would a separate disc image on the internal HD do the same thing?
    Thanks in advance.

    You can't. Each datafile is associated with a specific user and thus its permissions dictate what can be done with it. IMHO, it's best to use two datafiles, one for each user. Non-Apple application peculiarities are best addressed at that app's forums. In this case, visit http://www.quickencommunity.com/ and post to the appropriate forum.

  • Ive recently installed Creative Cloud on my Mac. Only to discover that TypeKit does not work at all

    If I open up the creative cloud app and under the fonts section it states "coming soon" It says the same under files.
    What could this be? and how would I fix this?

    Hi Kirk,
    Have you signed up for early access to font and file sync?  Add yourself to the list here:
    https://creative.adobe.com/earlyaccess
    New users are getting added all the time, so you shouldn't have to wait long after signing up!  You'll get an email when you've been approved with information on how to get started.
    I hope that this helps; let me know if you have any other questions.
    -- liz

  • Is following message due to 'Java' setting left unchecked? Mac OSX supportsUser Authentication Mechanism (UAM) plug - ins from other manufacturers to control access to servers.To use a UAM, copy the plug - in to: Library/ Filesystems/ AppleShare/ Authenti

    Is following message due to 'Java' setting left unchecked?
    Mac OSX supportsUser Authentication Mechanism (UAM) plug - ins from other manufacturers to control access to servers.To use a UAM, copy the plug - in to: Library/ Filesystems/ AppleShare/ Authenti

    Man that is an ancient message.
    The last time I saw that was using Mac clients connected to a Microsoft (Windows) Server running 'Services for Macintosh' which included the ability to act as an AppleShare compatible file server. Because Microsoft have a different security system for defining accounts which includes the 'domain' as well as username, the standard Mac AFP client did not know how to send that information.
    Therefore Apple made it possible to installed a plugin in the form of a UAM or User Authentication Mechanism which added the ability to send this information to login to the fileserver.
    See http://support.microsoft.com/kb/101747
    However Microsoft have long discontinued 'Services for Macintosh' and now the only way for a Mac to connect to a standard Windows Server is via SMB not AFP. I don't believe this plugin is available to download anymore.

Maybe you are looking for