GUI Languages for Unity 5.0

Hi, I am trying to find the list of Languages that can be installed on Unity 5.0
Does anyone know where I an find this document.
Thanks
Dominic

Hi Dominic,
Available Languages for Cisco Unity Components
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/release/notes/501curelnotes.pdf
Cheers!
Rob
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com/docs/DOC-8727

Similar Messages

How to use multiple languages in unity connection for greetings

Hi All,
I have unity connection 7.5 Version. i want to use multiple languages for greetings. i mean i have different users from different geographical location. so i want to use engilsh, french and spanish. can i customize my setup like that.
Regards
Pardha

Are you talking about the user greeting? Then have them record the greeting anywhere they want in whatever language they want. If you install multiple locales you can have each user record greeting in different language as well and then the appropriate language greeting will be played on who addresses this user by using "inherit language" feature. Though this will only work when addressing messages from withn voicemail, not by dialing from phone as that will simply use the default routing rule, unless you create custom rules.
HTH,
Chris

Change GUI Language in Crystal Reports XI

How can I change the GUI language of a installed Crystal Reports XI? At the installation, I have choosen "English" but now the GUI is in German.
As I found out, the GUI language depends on the regional settings in Windows. I have "Switzerland" as the default settings, so it seems the Crystal Reports sets the language to German. Is there a registry key or something else to change the language manually?
KR
Stephan

Hi Stephan,
When you install CR XI it should have the option to select all languages, I don't recall exact steps now, I don't have it installed any more.
Try doing a Repair install in add/remove programs and select Custom to choose all the languages. It should then select your default local.
CR 2008 now gives you the option in the Designer itself to set this option.
You can also upgrade to CR XI R2 for free, use your XI Keycode to install it and be sure to select the languages you want to support.
https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
https://smpdl.sap-ag.de/~sapidp/012002523100013876392008E/crxir2win_sp5.exe
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
Thank you
Don

Can't change gui language

How can I change the gui language to german?
I can use the german gui in my sql developer version 1.5. If I update the version 1.5 to 1.5.1 through the "Check for Updates" button, the gui is still displayed in german language.
If I download the sql developer 1.5.1, extract the program and execute the sqldeveloper.exe file, the gui is displayed in English.
In both cases it's the java included version, on Win XP SP2 (german version).

Unfortunately I haven't full list of all neccessary users. I've tried to create <sid>adm user and SAP_LocalAdmin SAP_<sid>_GlobalAdmin, SAP_<sid>_LocalAdmin groups, but nothing happens.
Have anybody positive experience in installing of developer workplace to location different from english?

Creating GUI's for simulators.

Hey all,
I am VERY new to Java. Can anyone point me in a direction to get more information on creating GUI's for simulators?
Thanks in advance.

Encephalopathic wrote:
overrule wrote:
Would your advice be extended to Jesus? I mean that he learn how to crawl before he tried to walk on water?I haven't learned that prog language.It's more about IQ isn't it, but okay, I'll give it to you in easily understandable terms - if you're dumb shut up.

Set GUI Language to English

Post Author: Ottenheim
CA Forum: General
Hello,
I want to set de GUI Language of Crystal Reports to English. My regional settings are Dutch but I don't want to change that. Is there another way to change this. I'm using all my applications in English and only this one is Dutch.
I've read somewhere that I have to delete my language DLL's from crystal report but than it only works when i start crystal directly from the executable, not when double - click the report and choose open with. All my colleagues have the same problem.
Really strange because with all other developer software it is possible to select a GUI language.
Hope someone can help me.

Post Author: Ottenheim
CA Forum: General
I've found the solution. I've renamed the english resource file to the dutch and vice versa. Now Crystal starts without running the setup for installing the missing language. Still strange this isn't an option in Crystal Report.

EA3: Change GUI language

Is it possible to change the GUI language? I am running a Windows with german language settings, but i want an english gui for sql developer.

That is weird, I have the same ORA-12705 error
message but I didn't change my GUI language, I had it
from the start.I think it's more a driver issue than a SQL Developer issue. I have seen this with other applications as well that change user.language to something different than the OS "Locale" (not that I'm using an english Windows XP, but the locale is set to Germany)
Btw: this was not at all necessary with SQL Developer 1.2
You can check which one of the NLS settings is giving
you a hard time by right-clicking in the logging page
- log screen and choosing "Fine" in the change log
level submenu, it will log the "ALTER SESSION"
requests it's trying to execute, and you will know
which one actually fails. Then you can input your own
SR... :)With logging page I assume you mean "View -> Log", right?
The only context menu I get in that panel are the the usual text selection items. Select, Select Al, Clear, Copy. Nothing to select the log level
But it's empty anyway and as the connection cannot be established at all, nothing is written to the log page at all. Enabling "Write log to file" doesn't write anything either.

How to change the GUI language to english

After updating to SQL Modeler 3.1 I notice that the GUI language is german now, corresponding to the local settings of my computer to swiss-german.
I share the same needas as expressed by Byte64 at FRIDAY, MARCH 13, 2009:
While i appreciate the globalization efforts, i feel much better having certain programs with an English user interface for the simple reason that when i need to communicate with someone else who doesn't speak Italian, i can talk about menu entries, settings, button names using a commonly understood language and without having to guess what the original entry in English language could be.
I have only to add, that the documention is also in english.
Unfortunately I could not reproduce his workaround. So that old problem is again open at present with SQL Modeler 3.1.
Can you please tell me how to change to software to use english menues communication.
regards LPNO

Thanks Dimitar, your hint helped and solved the problem.
As I work with datamodeler64.exe I added the lines below into datamodeler64.conf
AddVMOption -Duser.country=US
AddVMOption -Duser.language=en
after this I got english dialogs.
Still I have gathered some more information that my be helpfull for others to solve the same problem:
When adding the above two lines to datamodeler.conf, nothing happend. I still got german dialogs.
a.) when starting datamodeler64.exe (according to normal expectations)
b.) when starting datamodeler.exe (this is quite surprising)
After all the problem is solved.

Best language for games

Hello there
I am wondering what is the best language for computer games
Also what language are the top class games like fifa2003 developed in

Most games are written in C or C++ because they are faster as Java-games (*sigh*). Some games have a Java/c/c++ mixture. They use Java for scripting or for GUIs.
There are (some) complex Java-Games too using OpenGL or Java3D. But I cannot imagine how to write a Doom3-like 3rd person shooter in Java. I guess that would be very slow. But for Roleplay-Games like Neverwinter-Nights (which is not written in Java) or something like that it would be fast enough, I guess.
What I want to say: It depends on the kind of game you want to write.

Database storage of multiple languages for name of a single entity

Surely I'm not the first person to have this problem, but I can't find many resources on how to solve this. Just some background on what I'm working with, I'm running a web application using the Struts framework with jdk 1.4 on a Weblogic 8.1 server connected to an Oracle 9i database, I'm using DAO for my persistence layer, and I'm not opposed to using any 3rd party software to assist in this task.
For example, say I have a database of DVDs, My application will retrieve the list of DVDs from the database to display to the user. Depending on the user's Locale I want to display the title of the DVD in that language.
This is a simple example, but the real-world application is much more complicated. The application is highly configurable meaning that through a configuration application, my internal users can add DVDs at any time, edit the title of the DVD, or add a new language that they want the title to display in, etc. When a customer logs in to the application front-end they will be able to change the language they want the application to display in at any time, and the application will need to reflect that change. The display of constant text like field labels and page text is easy using Struts but its this configurable dynamic text thats a bit more difficult.
Its obvious to me that I will need to store the multiple languages in the database in some way, I'm thinking of either storage in some xml format, or a new table hanging off the "dvd" table with languages for each dvd. Either of these options would work for my purposes, but I don't want to go reinvent the wheel when this same problem has arleady been solved. If someone could point me in the right direction I would appreciate it

One common way to handle this is to modify your key for the dvd title to include a locale identifier:
key dvdtitle
becomes
key locale dvdtitle
Now your db can hold multiple translations of the same dvd title.
Regards,
John O'Conner
Its obvious to me that I will need to store the
multiple languages in the database in some way, I'm
thinking of either storage in some xml format, or a
new table hanging off the "dvd" table with languages
for each dvd. Either of these options would work for
my purposes, but I don't want to go reinvent the
wheel when this same problem has arleady been solved.
If someone could point me in the right direction I
I would appreciate it

Licensing for Unity Connection after Upgrade from 8.5 to 9.1.2

I upgraded my Unity connection from 8.5.1 to 9.1.2. ( my CUCM is still on 8.5.1) . I have 200 CUWL-STD ( 2200 DLUs), and 50 CUWL-PRO (850 DLUs) . Now I am working with Cisco to get a license file for Unity Connection and apply that to my ELM. I attached my licensing page for when I was in 8.5.1 . Just want to make sure if I will be getting enough license with that license file, or possibly I need to buy more. Someone told me that if I want to have users with mailbox I need to order more licenses since every user take one CUWL license.
Honestly i do not know how CUWL licensing work regardig to Unity or even CUCM.
Thanks,

Hi,
The following link provides details of licenses usage by diff endpoints on version 9.x
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/uct/9_1_1/CUCM_BK_U0AE00F5_00_uct-admin-guide/CUCM_BK_U0AE00F5_00_uct-admin-guide_chapter_0100.html
HTH
Manish

Unable to change language for SAP BW Report Iview

Dear all
We are currently rolling out BW Web Templates can be displayed in both EN and MS languages. The language can be changed via the URL that we display, e.g.
For English Language:
http://<hostname>:<port>/sap/bw/BEx?SAP-LANGUAGE=EN&cmd=ldoc&template_id=ZTEST
For Malay Language :
http://<hostname>:<port>/sap/bw/BEx?SAP-LANGUAGE=7&cmd=ldoc&template_id=ZTEST
We have published these templates into Ent. Portal 6 using SAP BW Report Iview, but unfortunately we cannot view the report in the Malay language (SAP-LANGUAGE=7), even though we have inserted the command SAP-LANGUAGE=7 in the SAP BW Report Iview query string. All the reports, although defaulted to SAP-LANGUAGE=7 displays in English. We also tried to set the language settings for the Iview, but there are no language 7 or MS in the Iview. It can only be defaulted to the Portals language, which is English.
Note that the reports can be viewed in the different languages if we using the URL separately outside of Portal, and also within BW Bex Analyzer itself. Only the Portal doesnt allow us to view the reports in MS language.
Can someone help us on this matter? All helps really appreciated. Thanks a lot.

Hi Chris,
That's a bit odd indeed. If I understand your question correctly, you do get the BW reports in the correct language (either English or Malay) using the url's in your post but not when using them within a standard BW report iView?
The language setting for the iView has, unfortunately, nothing to do with the language for the content itself but can you tell me what the requested URL is for both Reports?
The BW Report iView is based on the Application Integration Component that generates the URL based on the paramaters you provide in the BW report iView.The following template is being used: <iView[PORTAl_URL]>?System=<System[url_Encode]>&Report=<Report>&DynamicParameter=<DynamicParameter[url_Encode]>. I could be that the generation of the URL fails due to the 7 (don't know why, just a gut feeling because it's the only thing that's different between those urls). You could try to use create an iView based on the Application Integrator instead (some more control over the URL template) but first you need to check whether the URL generated by the iView is correct.
Cheers!
Frodo
P.S: Award points if you find this useful

Purchasing additional languages for movies on Apple TV

Hello,
We are a multilingual family, and are trying to promote the use of all our languages to our kids, French, Italian and English. We use the Apple Tv extensively, and I was wondering if there is an option to purchase aditional languages for movies on the Apple TV.
for example we purchase kids movies on the French itunes store and it includes both french and english languages, but not italian. However that same movies is available on the italian itunes store in italian. However since I have already purchased the movies i don't want to buy them all again on the italian itunes store. That would cost too much, but also we would have duplicates of our movies and in seperate itunes store accounts just to be able to watch them in different languages. This would be very inconvenient. In other cases, some movies on the french itunes store only have french as the language, however the english and italian languages are again available in the english and italian itunes store respectively.
The world is becoming ever more international and multilingual, and access to languages should not be so complicated. In fact Apple has always been a pioneer in offering all languages on their Mac OS and iOS, embracing the multilingual spirit.
IT would be extremely useful, if we could add aditional languages to an already purchased movie.
thank you for your help, if you have a solution to my problem.

To have Apple see your request, you should repost it at
http://www.apple.com/feedback
In the meantime, you might want to see whether other stores offer movies with more languages included.

How to maintained the Text language for CKF keyfigure

Dear All,
Please let me know how to maintained the text language for CKF I am using only keyfigures in CKF.
Issue is text is not showing in Spain language when user exeuted the report (longin Spain) for CKF keyfigures .
As per report design there are formuals and direct keyfigures and CKF has defined and we keep it under in Row struture in the report.
After exeuted the report (Login Spain)Text has converted in all languages along with spain except for CKF keyfigures.
Issue in text CKF's:
There is a main CKF (Cost) under this again we defined two sub CKF's those are total cost and average cost. We able to see the text in Spain language for Main CKF(cost) and also cheked in RSZELTTXT(Texts of reporting component elements) for the same.
We can able to see the text in all languages for main CKF(cost) and enteries are there in RSZELTTXT table.
We can see only the text in english for total cost and average cost and also enteris are there only in EN in RSZELTTXT table.
It would help to me if any one can answer my question.
Thanks in advance .
Regards,
MQ

U can fetch the texts for the items using
Read_text.
Example:
    g_f_tdname = xvttp-vbeln.
    g_f_obj = p_obj.
    g_f_langu = 'DE'.
    REFRESH g_t_lines.
    CLEAR g_t_lines.
    CALL FUNCTION 'READ_TEXT'
         EXPORTING
              id                      = p_var
              language                = g_f_langu
              name                    = g_f_tdname
              object                  = g_f_obj
         TABLES
              lines                   = g_t_lines
         EXCEPTIONS
              id                      = 1
              language                = 2
              name                    = 3
              not_found               = 4
              object                  = 5
              reference_check         = 6
              wrong_access_to_archive = 7
              OTHERS                  = 8.
    IF sy-subrc <> 0.
     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
The Required fields are,
Text-id ,language,name,object.
Let me know if you further require help.
Regards

Where can I get window os 2003 for unity 5.0(1) for MCS7835I1 platform?

Dear All,
I didn't receive any DVD on window os 2003 for unity 5.0(1) for MCS7835I1 platform for my purchase.
I only have got the IP Telephony OS 2003.1.1 which stated in the document that it is not for Unity.
So I tried to open case to TAC but they asked us to look from Microsoft but I believed that normal window os will not be able to install on MCS sever, am I right? So where actually can I look for this window os?
Thanks in advance
Jarunee

Hi Jarunee,
You have 2 options:
1) You purchased the MCS-7835-I1-ECS1, I would expect this one to come with the platform configuration disk (PCD). If you did not get this you will need to contact customer service as outline in this document
2) You purchased another flavor of this server model such as MCS-7835-I1-IPC1 or directly from IBM. This will not come with the PCD. For this you will not get a PCD and you will need to supply the operating system yourself.
The installation guide covers both scenarios to set up Unity either with PCD or self supplied OS.

GUI Languages for Unity 5.0

Similar Messages

Maybe you are looking for