Gui mode report in a file

how to i store a gui mode report in a file and print it..eg..i give a query select count(*) from emp...with
desname -> c:\myfile.txt
destype -> file
mode -> default
after the report runs and i check the file it has only some junk characters no readable output why...any suggestions
but if i give mode-> character it writes to a file..
also cant we give PRT filename in DESFORMAT
if destype is a file and mode-> default..
it complains invalid desformat used..but if mode is character it allows please clarify
null

Hello,
You didn't say what version of Reports, but likely you are using the bitmapped executable, which means you should explicitly set MODE=CHARACTER. As it is, it is defaulting to BITMAPPED, which means it is producing Postscript or PCL output.
As the documentation states, MODE=BITMAPPED means DESFORMAT contains the output type (PDF, RTF, etc.).
Regards,
The Oracle Reports Team --skw

Similar Messages

Save a character mode report to ascii file after previewing?

Question:
why isn't there a way to say generate a character mode report into an ascii file form the Previewer, am I missing somethig?
I know you can choose print and then print to file or choose generate to Postscript file, but it is not as clean as it is with bitmaps that you can preview and then save as: html, pdf, htmlcss, rtf etc.
very many thanks in advance,
ER.
null

I am really glad someone tried to help me. Truly thanks.
However, I am even more confused now because once I see my character mode report in the previewer and try to generate into an html file the message is:
rep-1920: Character mode runtime incompatible with desformat of pdf, html, htmlcss or rtf,
There is no such error with bitmap reports so why would it be a problem for the character report since you say it is converted to bitmap?
Other than that, even more important question is using this same report to be displayed on web: since there is no convinient storing in the local users space
in that case.
Thanks,
ER.

Crs installation in silent mode report "No such file or directory"

Hi,
i'm trying to install crs 11.2 in silent mode with response file.
my oracle_home is /grid and when i execute runinstaller it reports
"Error returned: No such file or directory" after check prerequisite.
I try to change oracle_home in /grid/crs and the error was not reported.
i need to put grid 11.2 on /grid oracle_home.
can anyone help me?

First rule, use the Optimal Flexible Architecture (OFA) standard.
http://download.oracle.com/docs/cd/E11882_01/em.112/e12255/oui2_manage_oracle_homes.htm#OUICG165
Will I need the output log.
But check this
http://download.oracle.com/docs/cd/E17116_01/doc/install.112/e10815/crsunix.htm#CBHFHABD
Regards,
Levi Pereira

Where yo find reporting services log files in sharepoint 2013 integrated mode

i use to find the reporting services log files in the msrs folder in sharepoin 2010 integrated mode. but when we migrated to sharepoint 2013. i am not able to find the logs.i wanted to check all the executed sql statement using the logs as we don't have
access to sql server profiler. does anybody know the location of yhe logs?

Hi there,
Not sure you'll see the sql statements however you can find information on the ULS logs here:
http://technet.microsoft.com/en-us/library/cc627510(v=sql.105).aspx
http://technet.microsoft.com/en-us/library/ff487871(v=sql.105).aspx
and here:
http://technet.microsoft.com/en-us/library/ms156500(v=sql.105).aspx
You might want this once ULS log is capturing info.
http://archive.msdn.microsoft.com/ULSViewer
cheers,
Andrew
Andrew Sears, T4G Limited, http://www.performancepointing.com

How to modify & use Printer Defination files for Character Mode Report

How can use & modify printer defination files for changing formats & orientation in character mode report. I donot know how to use printer defination files I tried to set the system parameter (Desformat) but it doesn't work.

I m also faced same problem that u face,
If u want to make character mode report so plz follow these instructions:
1. Set the properties of Report Name Node in Character Cell is Yes.
2. Change the mode of the System Parameter Mode is Character.
3. Goto the Layout---> Main Section Properties and set the Character Report Width and Height like 132 and 66
4. Create Formula Column and write this code "RETURN(CHR(14));"
5. Goto Layout Model and map this formula column into Header of the Body Like If ur Company Name is "ABC COMPANY" attached with field and map Formula Column.
5. Goto Printer Definition File DFLT.prt open in NotePad and set width and hieght that u set in Main Section of Report.
6. At Last u Run the Report with Some System Parameter or User Parameter and View as Character Mode Report.
In My Case I used EPSON LQ2180 Printer
So, U Ask More Qustion and u have more knowledge About character mode report Plz Mail me at this address.
Shahid Shafi
[email protected]

URGENT: How to print the report to a file

Hi
Environment Windows NT/2000 Forms 2.5
I want to print the output of a particular report to a file.
When I direct the output to the printer and click on 'print to file' option, it prints to a file but the file is not in a recognizable format.
I want the report to be opened in excel because it is a tabular report with no graphics.
How to achieve that. I'm absolutely new to Reports.
Regards
Naveen

Hi ,
Its quite obvious that you are new to the report, what you are trying to do NOW is that you are trying to output a GUI report to a file , which you cannot , for that what you have to do is change the report layout to characther mode (of course you will not be able to get some gui features, ) but if your intention is to get a output to file , then this is the only way, plus you have to realign your report once you change the format to characther mode
regards
rajesh
Hi
Environment Windows NT/2000 Forms 2.5
I want to print the output of a particular report to a file.
When I direct the output to the printer and click on 'print to file' option, it prints to a file but the file is not in a recognizable format.
I want the report to be opened in excel because it is a tabular report with no graphics.
How to achieve that. I'm absolutely new to Reports.
Regards
Naveen

Linebreak Code in Character Mode Report

Dear All
I m saving a Character Mode Report which is 132 column Wide, and i can access that report in Note Pad in proper format and alignment but when i m use WORDPAD, it open in un aligned format i mean with line break.
so any one can give me any Idea so i can open that report in WORDPAD too.

Take a look at the .prt file that you are using. The linebreak code is stored in there and you can alter it to the appropriate code for your printer/platform/application to view correctly.

Font Size in Character Mode Report

Hi ,
I have to print a report in a pre printed Stationary, which has tabular columns The columns are little bit small . when i have bigger data say value like 9999999.45 it over prints on the pre printed text. is it possible to reduce the size of the data at these places and be normal in other parts of the report.
i.e. Font size reduced inside the tabular column and normal for the remaining part of the report
Will appreciate the help

Font size in character mode report cannot be control through Oracle Report.
 
You can use report .prt file or manually set the printer to print character in small size.
 
Raj 
www.oraclebrains.com<a>
 POWERED by the people, to the people and for the people WHERE ORACLE IS PASSION.

Problem in Character Mode Report (Urgent)

Dear All
i m designing a character mode report
and when i preview it ,,, it will display
different report font which is big in size
and width so it is not fit in the designed columns
can any one help me ,, y this problem is exist
though i m using Dot matrix printer EPSON DFX-8500
printer.

Hi..
If you are directly giving Print from previewer..you need to set printer to 10 cpi (if you want bigger font) and 12 dpi to compress the larger font..
CPI is character per inch so in one inch 10 chr or 12 chr can fir acc to setting.
If you are uploading file on Oracle Apps then you need to set fonts if needed in concurrent manager,printer setting,Style,fonts ..
"But the hardware setting is vewry imp..set the font in DRAFT mode"..
tarak desai
[email protected]

Character mode Report in Landscape Format

Hi All,
I want to print my character mode report in landscape format. But I am not getting it. Everytime I get print as Portrait. I am printing from live previewer of report builder.
I am using Oracle 9i and Report builder 6i (6.0.8.11.3).
I have done following settings:
System Parameter ORIENTATION=Landscape
DESFORMAT=DECLAND.PRT (Given by Oracle)
In the object navigator I have set following properties for Main Section
Width=11
Height=8.5
Orientation=Landscape
Char Mode Width=132
Char Mode height=66
I have done same settings for Header Section and Trailer Section. Please help me.
Thanks in advance.
Regards
Mona

You will need to edit prt files to add the printer escape sequences to change the page orientation to landscape. Printer escape sequences can be obtained from the printer manual, or the printer vendor.
For instance, HP printer escape codes can be obtained from the HP website under the printer support links.
The steps below describe how to print a landscape, character mode report from a Windows NT PC on an HP 4100N Printer. The 4100N is a dual mode printer that can use either PCL or Postscript printer language.
1. Use a web browser to navigate to the HP website and obtain the printer escape codes for the HP 4100N. If you are unable to locate the HP4100N printer, look for generic PCL information. The HP site also includes detailed information on the printer command syntax.
2. The HP4100N printer command for landscape page orientation is "ESC&l1O" - where ESC indicates escape, '&' (ampersand) is the parameterized character, 'l'(lower case letter l) is the group character, '1' (number one) is the printer value character and 'O' (upper case letter O) is the termination character.
NOTE: The HP documentation uses "EC" to signify the escape character.
It also suggests pressing CTRL and the letter P together, then
releasing both keys and pressing the ESC key. If this is done in
a dos editor, a left arrow will actually be displayed on screen.
This character cannot be interpreted by Oracle Reports and will
cause printing errors if used in a .prt file. Instead, just use
the letters "ESC" to indicate that the code that follows is a printer
escape sequence.
3. Make a copy of the wide.prt file and rename it to "mywide.prt."
4. Add the page orientation escapes to mywide.prt file:
printer "mywide"
height 66
width 132
before report esc "&l1O" *** Puts Page in Landscape Orientation***
after page control(L)
after report esc "&l0O" *** Resets page orientation to Portrait ***
return control(M)
linefeed control(J)
SYNTAX NOTES: The escape sequence must be enclosed in double quotes ("). The above comments regarding page orientation are used to clarify where the escape codes gets added, but they should NOT be used when editing
the actual .prt file.
5. Save mywide.prt file to the $ORACLE_HOME\report60\printers\ directory.
6. Go to Windows PC -> Start -> Settings -> Printers and open the properties for the HP printer. Ensure that the option to "Always Spool Raw Data" is checked. This option is usually under the General Printer
Options, or Spool Options. On Windows NT, you must have Administrator privileges to change this setting.
7. Test running the report to the printer and specify desformat mywide. It is not necessary to include the file extension (.prt).
8. The report will now print in landscape orientation.

Problem to print character mode report in Landscape

I set orientation and select but it still print in landscape character mode. When it print in character mode report in portrait format its ok.
I Set and use all the option in report to print in Landscape in character mode.
I ask you please to give me information about the printing definition files and its codes, how to use printer codes. I use two printers
1. Epson LQ2180 2. HP 6L
I used HPLWIDE printing definition files put its still print in portrait format not to print in landscape.
Thanks for corporation
I will wait ur reply...
At this address
[email protected]
[email protected]

Hi,
This sounds like a similar problem that I had (and still having). It was (is) a Bug. Go to metalink.oracle.com and reference this bug#1413754. See if this is your problem as well. My only work around was change the format of the file instead of using character mode I am now using PDF. Which is working fine for me.
~Vannette

Cannot log into any GUI modes and need to reinstall OSX

Hi all,
I've been having issues with my iMac 27" i7 desktop which I purchased back in 2011 with OSX Lion.
I recently updated to OSX Mavericks and have some issues which I am trying to resolve.
I have been working through troubleshooting with the Apple Support team as it is still covered by the extended warranty that I purchased with the system. Unfortunately it appears that we have come to the end of their technical support capabilities and I have no resolution.   Here is a quick breakdown of the situation:
While doing some gaming in a Bootcamp copy of Windows 7 the computer froze and displayed a green screen with vertical lines and was unresponsive.
Rebooted the machine into OSX Mavericks (upgraded about a month ago from Lion) and after the Apple symbol and loading wheel, when the machine went to display my desktop it froze with a completely white screen.
Tried to reboot back into Windows 7 and when it went to display the desktop it went to a grey screen with vertical lines.
Called the Apple Support line who advised me how to log into Safe Mode.   This worked ok and then I rebooted into OSX properly and my desktop displayed albeit running very slow.
Backed up my data and then while doing some web browsing the computer locked up and went to a blank screen.
Called the Apple Support line who took me into Recovery Mode and got me to Verify the Disk and Verify Disk Permissions. Also advised me to run Apple Hardware Test.
Ran Apple Hardware Test and it said that there are "no problems"
Booted back into OSX which worked ok but still very slow.
During a data transfer the computer locked up with a black screen and the rainbow spinning wheel and was unresponsive.
After a few attempts I was able to log back in and complete my backup of crucial files.
Yesterday I went to boot the computer and it again gets to point after the Apple symbol and loading wheel where it would display my desktop and goes to blank screen. Apple Support advised that the next step for testing purposes is to format the HDD and reinstall OSX.
No matter whether I am trying to boot into OSX, Safe Mode, Recovery Partition or Internet Recovery (I have tried all numerous times) whenever it gets to a point where the GUI would be displayed the machine locks up and I get a blank white screen. I logged into Single-User Mode and ran a file system check which came up ok and I have run AHT again which came up ok as well, however considering that it doesn't matter where I boot to the same error occurs I believe that the issue is probably hardware related rather than software. I have also followed the instructions to clear the PVRAM
I have booted to OSX using Verbose mode and noticed that there are a number of SMC errors and other messages indicating that there may be some software issues, so I am trying to troubleshoot those before I take the machine to the Authorised Apple Repair Centre
I have created an OSX Mavericks Boot USB but that comes up with a white screen as well if I boot to it.
I'm not sure if it will help, but I can select my recovery partition (OSX Base System) during boot and load into single user mode there.   I'm curious whether (and how) to run diskutils from there to verify disk and permissions for my primary partition (lets call it "Lion"). Then erase the disk and reinstall OSX from my boot USB.

You have to start the miniSAP instance before you can log in to it.
On your desk top there should be an icon 'start SAP WA1' start that, and leave the DOS window running until you are finished.
If you get messages in the DOS window saying processes died check that MS loopback is running.
MattG.

Unable to export report to excel file from SAP

Hi all,
I have a problem to download data from a report. The XL gets downloaded in a different format than my colleague.
We are using the same XL version but two weeks back the SAP GUI 730 got reinstalled to my machine and since then the problem
started.
Can you please confirm is there is any particular user settings for this?
I have login in any different working ( SAP Export ) machine with my login ID and Password and try to export the report to excel file from SAP, and I have same issue . Same we have requested another user to login in my machine with their ID and Password and check the same, They have tried and its working for then in my machine.
see screenshots attached.
Thanks.

Execute report>
Right click anywhere in the report output and select Spreadsheet.
A pop up box will appear, select which export option you would like to use and click green check.
NOTE: If you don't see this option then goto Settings>Switch List then try above said.
Thanks,
Kumar

URGENT: Problem in printing Character Mode Report in Chinese Version

Hello,
I am working with Reports 6i. i have developed one Character mode report. This report is working and printing fine in Windows 2000 Server (English Version). But, this report is not working properly in Windows 2000 Professional (Traditional Chinese Version) where i have compiled report in Chinese Version Machine. And, i am getting the Preview properly. Main problem is at the time of printing. I am using EPSON LQ - 2070 Dot Matrix Printer.
Please help me on this issue.
Thanks in advance.
S.Sudhakar Sankar.

Try printing to file first and ensure that the output is correct in something like "notepad" with the appropriate font.

Reports 6i - character mode report - to reduce font size of field

HI, friends,
I am using Developer 6i with windows xp platform.
In reports how to change the font size of a perticular field in the layout.
In character mode report it is not possible to change the font size directly.
I tried using the properties Printer code before ,printer code after i.e for e.g by giving the values
printer code before - &1, printer code after - &1. But on printing the report on paper there is no change
in font size.
what to do? should i change any thing in printer files like .PRT files?? if so how?
or Any altenate method??
plz suggest.
with thanks
GMS

HI, I My self writing , who created this question, as I got sucess in changing the font size.
my dflt.prt in printer folder has the following,
printer "dflt"
height 46
width 130
after page control(L)
return control(M)
linefeed control(J)
code "1" esc "G"
code "2" esc "H"
code "3" esc "4"
code "4" esc "5"
code "5" esc "W1"
code "6" esc "W0"
code "7" esc "C"
code "8" control(O)
code "9" control(R)
I am able to increase the font size using code &5 and & 6 for the fileds or lables in report.
But how to reduce the font size ???
which code should I use in printer file. Our dot matrix printer is of type EPSON.

Gui mode report in a file

Similar Messages

Maybe you are looking for