GUI of Minefield for Windows 64bit (4.0b13pre and earlier) is "corrupted"

The GUI of the Windows 64bit version of Minefield (4.2a1pre, 4.0b13pre and earlier) is somehow corrupted. The tabs and the address bar contain vertical left-out spaces as well as other parts. The browser itself works pretty good.

Yes. The GUI irritations have gone after applying the recent update 4.2a1pre (2001-04-12). Many thanks to the community!
PS: after applying the update of 2011-04-14 the version number has changed from 4.2a1pre to 6.0a1. What does this mean exactly? Won't there be a released Firefox 4-x64 version anymore but instead this is already an alpha for a future release?

Similar Messages

  • I updated to itunes 11, uninstalled it according to directions, and  re-installed itunes 10.7.021 for windows 64bit.  Now Iget the message itunes library.itl cannot be read because it was created by an earlier version of itunes

    I updated my computer to Itune 11, did not like it, and uninstalled it exactly according to directions. I re-installed Itune10.7.021 for Windows 64bit, but now I keep getting the message "The file  itunes library.itl cannot be read because it was created by a newer version of itunes.  How can I resolve this problem?

    zepel has it, but perhaps some more detail will help.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • Is it possible to launch SAP GUI (not webGui for windows) from UWL

    Hi Experts,
    Is it possible to launch a transaction or document in SAP GUI (not WebGUI for windows) from UWL? If yes - how do I achieve that?
    Appreciate your help.
    Giri.

    Hi,
    Yes, you can create an SAP transaction iview and open that iview. Refer  following link for task launch :
    http://help.sap.com/saphelp_nw70/helpdata/EN/59/d516690e854c7090ae15bf492a869f/frameset.htm
    regards,
    Jigar Oza

  • SAP GUI 7.20 for Windows and problem with Screen Painter

    Hello,
    I just installed the SAP GUI 7.20 for Windows and it looks good.
    But when when I start the Screen Painter for a dynpro I get the following message:
    Graphical Layout Editor not available. Continue with alphanumeric editor.
    And: EU_SCRP_WN32 Connection broken  '..' / CPIC
    The SCreen Painter is installed correctly (I can start ist manually from file system) and the RFC destination works.
    Any idea?
    Regards,
    Ole.

    Hello,
    I've uninstalled all SAP installations, cleaned the registry of Windows XP and deleted all folders with SAP content. Then I've installed the SAP Gui 7.20 again and it works.
    And now I will update the Screen Painter with the information from the OSS-Note!
    Thank's for your help!
    Regards,
    Ole.

  • My iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

    my iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

    It won't pass 10.3.
    What does this mean?
    I figured it out. Thanks!!!
    What did you figure out? How about posting how you resolved it?

  • TS3212 How i can download iTunes for Windows 64Bit if I have downloading this through Linux Ubuntu?

    How i can download iTunes for Windows 64Bit if I have downloading this through Linux Ubuntu?

    Thank you for you answer, but it isn't heart of the problem. The problem is that I don't have choose iTunes version manually, it's happens automatically, and start downloading iTunes for Windows 32-bit.

  • Is not there grid control 10g for windows 64bits... ?

    Hi
    I checked the softwares in Oracle.com and I do not find the grid control 10g for windows 64bits...... only for 32bits.
    Can I use the software of 32 bits in the 64bits OS ?
    I downloaded the 32bits software and I tried to install it but the OUI dissapear suddently....
    Thanks

    Surprising but I think you are correct, there is no 64 bit Windows release available for EM(Grid Console), neither on OTN nor on Edelivery. In a general speak, yes 32 bit version should get installed on 64 bit.
    HTH
    Aman....

  • Can I remove iPod for Windows 2006-03-23 and 2006-06-28?

    I have the latest update of iTunes installed on my PC. I'm trying to remove uneeded programs from my c drive. Is it safe to remove iPod for Windows 2006-03-23 and iPod for Windows 2006-06-28? If I removed them will it adversely affect the restoring of the iPod to factory settings or cause other problems?

    The iPod updater is now integrated with iTunes so that you no longer need the standalone updaters each of which only delivered a particular version of the software. You can safely delete them, you'll find a few of the later ones are still available for download should you feel you need one. If you need to restore your iPod this can be done through iTunes: Restoring iPod to Factory Settings with iTunes 7

  • Do we need CALS for windows server 2008 R2 and 2012 R2 if 2008 R2 is just a stepping stone?

    We currently have a server on Windows Server 2008 RC SP2 64-bit with approximately 20 clients.
    We want to upgrade to Windows server 2012 R2 but first need to upgrade to Windows 2008 R2 to allow us to do a straight upgrade.
    Is it possible to upgrade to Windows Server 2008 R2 with the 5 CAL's included and then upgradeto 2012 R2 and install 20 new CAL's and keep all users accounts and domain PC's the same? 

    Ok sorry for using the wrong terminology... I was under the impression for each client (Computer) connecting to the server we will need a CAL (Client Activation License) in order for the computer to be a domain PC on the server. Do I need 20 CALS's
    for Windows Server 2008 R2 and then another for Windows Server 2012 R2 if we are only upgrading to 2008 R2 to be able to upgrade to 2012 R2 without having to do a clean install.
    For WindowsServer (Standard edition or Enterprise edition or DataCenter edition), a Client Access License (CAL) is required for each device (if you're using the per-Device CAL licensing method), or, is required for each user (if you're using the per-User
    CAL licensing method).
    (whether you use per-Device, or per-User, is up to you, it comes down to cost).
    CALs are version-specific (to a point) - i.e. if you purchased WS2008 CALs for your 20 devices, for use with your WS2008 server, and you are now upgrading that server to WS2012, you need to upgrade your CALs.
    If you are adding a second server which is WS2012, and you are keeping your WS2008 server, you need to upgrade your CALs (because you only purchased WS2008 CALs which don't grant you the rights to connect to the newer server).
    If you were to install your second server as WS2008, you wouldn't need to purchase additional CALs, because as long as the version is the same, a single CAL grant you access to unlimited server (of the same version).
    CALs can be tricky to correctly license.
    Here's some introductory reading:
    http://www.microsoft.com/licensing/about-licensing/client-access-license.aspx#tab=1
    And, none of this relates to the technical aspects of product installation/configuration at all (e.g. clean install vs. upgrade).
    Windows Server CALs are not license keys/tokens/files which you install/load/download - Windows Server CALs are quite literally paper-based (just like a drivers license or car registration). You are required to have them, to be correctly licensed, but, you
    don't physically do anything with them to own/drive a car.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • What is the Java runtime version required for SAP GUI 6.20 for Windows?

    Hi All,
    I need the following information:
    1.       What is the Java Runtime version required for SAP GUI version 6.2 for Windows (Platform Windows XP)?
    2.       And is there any problem if we use Java runtime version 1.6 on PC?
    It would be great if anybody can provide the information on the above.

    To run SAP GUI for WIndows -- Java isnt a pre-requisite nor is there any dependency for the same.
    Thanks,
    GLM

  • Is Firefox x64 (Minefield) for Windows compatible with the x64 Java 7 Beta?

    Firefox x64 (Minefield) on Windows 7 crashes with the Beta x64 Java 7 (it works on 64 bit windows, and the 32 bit java 7 works in 32 bit firefox). It works fine with any newer version of Java 6 x64 however. Is this a firefox or Java bug?

    I was having this problem myself until just recently.
    However, it works for me with the following:
    Nightly x64 6.0a1 builddate 05222011 and
    Java 7 x64 b143
    Earlier versions causes crashes, so try updating to the latest JRE7 and the latest Nightly.

  • Error installing itunes 11.1.5 for windows(64bit)

    The procedure entry point
    ?videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@
    @@***@@$0A@VCrashOnOverflow@2@@***@@XZ could not be
    located in the dymanic link library C:\Program Files (x86)\Common
    Files\Apple\AppleApplication Support\WebKit.dll
    and
    iTunes was not installed correctly.  Please reinstall iTunes.
    Error 7 (Windows error 127)
    It's broke  :-(  .

    Try the following user tip:
    iTunes for Windows 11.1.4.62 and 11.1.5.5: "The procedure entry point: ?videoTracks@QTMovie@ [...]" error messages when launching iTunes

  • Jabber for Windows 9.2.2 and SSO

    Hi,
    We have a cloud based Jabber for Windows deployment with SSO via ADFS.
    Since we have upgraded from 9.2.1 to 9.2.2 we're having trouble with the CTI and voicemail credentials:
    The voicemail credentials are just gone when I restart jabber, the CTI credentials are invalid.
    I have raised a TAC case and the answer was "yes something has changed, you need to save the credentials in the cloud",
    but you need to ask the WebEx support team...:-(((
    Did I miss something in any presentation at the beta training?
    Thanks for any help.
    Steffen
    Sent from Cisco Technical Support iPad App

    You say that 10.5 added this (by 'this', I'm assuming you mean single sign-on) however the documentation I pointed this refers to CUC 9.1. We have 9.2 and we have started with a version 9 of Jabber and updated with each version. If this was only added with 10.5 why was it documented in earlier versions and with the same requirements of adding an OpenAM server?
    Other XMPP solutions we have tried (wildfire/Openfire & MS Lync for example) can interact directly with AD and authenticate users without having a go-between server, it's simply Jabber/chat server to AD.
    If I install 10.5 over our existing deployment of 9.7.2 (jabber client I'm referring to), what extra benefit do I get directly relating to SSO? With each new version it seems SSO is either improved or added but yet the requirements and setup have not changed, and when you do find the instructions and much digging around it basically points to having to research, install and configure an entirely separate server and then simply point the Cisco server to that. Given the complexity of the Cisco VOIP setup, getting our server infrastructure updated will not be an easy task and taken lightly if the only reason is that SSO would be enabled but will still require a separate server.

  • Jabber for Windows - Flip between WebEx and CUPS logins

    I am running Jabber for Windows 9.0.5
    I want to flip between my CUPS install in my lab and a WebEx Connect instance we are testing.  I can get it logged into my CUPS instance but when I go to File -- Connection Settings and choose WebEx, it will not login.  I tried specifying the server but I don't know what the URL would be.  The one in the default is
    https://loginp.webexconnect.com/cas/auth.do
    But that seems to not work.
    How do I get Jabber for windows to login to my Connect account?  Maybe it's not supposed to but I thought this was the on-demand version of Jabber that is documented here
    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps6836/ps12511/data_sheet_c78-704195.html&ei=6J-AUK8yjJOzBtLFgbAK&usg=AFQjCNFQ_n2Ih1yyFi_LQry4M_5E0ba-uA&sig2=v0-ta4tEtjZMzU6hC3Vf0A

    Hello, Josh!
    You can switch the config of J4W by altering the Connection Settings under the File menu before you log in. On my Jabber client, I selected the Cisco WebEx server type and left the login server address by checking the default server option. Make sure you log into WebEx Messenger (formerly WebEx Connect) using your complete email name (in my case, [email protected]) and your WebEx Messenger IM password (not necessarily same as WebEx Meeting Center credentials). I don't know the startup process for J4W, so I don't know how this works with the default server option. I'll follow up, though, as I know I saw a post that addresses this.

  • My iCloud for windows is syncing email and notes with my MS Outlook 2013 on windows 8 but NOT contacts and calendar

    Dear, I have downloaded and installed iCloud for windows and see that a user has been auto setup in my MS Outlookvia imap. I can now sync email and notes.I cannot sync icloud contacts and calendar with my MS Outlook, can you help me with this?

    iCloud hosts the calendars on its server and your various computers read them from there. The protocol for doing this is called CalDAV.
    Outlook for Mac has not been equipped with the programming for CalDAV and therefore cannot access iCloud calendars. Outlook for Windows evidently has and can.
    This is something only Microsoft can rectify and you could send them feedback suggesting they do this with all convenient speed.
    Outlook on a Mac can only access calendars living under 'On My Mac' and these cannot sync with iCloud. iCal can sync with iCloud provided you have 1-.7.2 or higher.

Maybe you are looking for