GUI problem :10035 wsaewouldblock : resource temporarily unavailable

Hi..I am using SAP GUI 7.10. I m connecting thru remote..where my server is located at some other place.. I gave that System IP. And the following error I am getting that "
WSAEWOULDBLOCK : RESOURCE TEMPORARILY UNAVAILABLE". how to resolve this. I am able to ping that IP address.
Thanks

Hi!
Is there any firewalls blocking the connection? Have you tried telnet to host on port 32xx, where xx is system number? If telnet does not work, then your firewalls are blocking the connection.

Similar Messages

WSAEWOULDBLOCK - Resources temporarily unavailable

Hi,
I am trying to open one of our IDES server via SAP GUI. I am getting the following error as ' Partner 192.168.0.0 Sapdb00 not reached' WSAEWOULDBLOCK - Resources temporarily unavailable'.
When I try to login via SAPGUI directly from the server where IDES is running, it works fine. But when i try from other machines it throws the above errors. I checked up the services and hosts file entry. It has the following entries
sapdp00 3200/tcp till 3399 is mentioned.
Please help to resove this issue.
regards,
raj

Hi Raj,
Please check that from your end port 3200, 3300, 3600 are open or not, where 00 is your instanace number.
you can check the same via doing telnet from end user desktop i.e..
telnet (ip address of server) 3200 where 3200 is port number metioned.
Cheers
Deepanshu

WSAEWOULDBLOCK: Resource temporarily unavailable

Hi All,
Please help me on resolving the SAP log in issue.
I am able to ping the IP from CMD and not able to log in to SAP.. While log in I get the below error message.
WSAEWOULDBLOCK: Resource temporarily unavailable
The server is up and running and some of my collegues at onsite are able to log in to the system but am not able .. please help.
Thanks
Manju

Hi,
Thanks for the responce. when I do telnet <ip> <port> it says "Could not open the connetion to the host on port.
Please let me know how to check whether the port is opened or not and whether it should be done on the BI server or on the remote machine.
Thanks lot for your responce.
thanks
Manju

Wsaewouldblock resource temporarily unavailable,pls help me to resolve it

When i logon to sapgui it shows error "wsaewouldblock resource temporarily unavailable" for a particular landscape but otherthan that i can logon perfectly.i m getting this error since last friday and before tat it was fine
i tried to logon through run->sapgui "Applicaation Server" "sys no" but it also shows error.....

how to check SAP ports on n/w
On Windows
netstat -ano ---> will list all ports in use
netstat -ano | findstr 3600 --> will show if port 3600 is in use.
On Unix
lsof -i | grep 3600 --> will show if port 3600 is in use.
Hope that helps.

Terminal: -bash: fork: Resource temporarily unavailable

I'm having
"-bash: fork: Resource temporarily unavailable" when I open up the terminal on my 10.4.6 system. The only way to remedy this issue seems to restart which is at minimum annoying. The other odd thing is when this occurs and if I open up the system preferences I can not interact with the GUI interface until I close the terminal. All the preferences are greyed out.

I figured out what the problem is. Seems like the 10.4 OS has a 100 process limitation. So if you are power user of all things OS X (i.e. dashboards, and at least 20 open apps) among other OS process you'll come across this limitation. Try to limit the number of process perhaps killing all your dashboard widgets might remedy the issue. Hopefully 10.5 resolves these users.. since 8 GB RAM shouldn't have hardly any limits except hmm upgrading to 16GB

Mac OS 10.7 Server won't mount DMG's after opening and closing - "Resource Temporarily Unavailable"

I am running Mac OS 10.7.3 Server on Mac Pro 2 x 2.66 GHz 6-Core Intel Xeon with multiple users editing on Avid.
DMG's containing raw camera footage are stored on the server, mounted by connected users on their desktops to allow Avid to access the enclosed data within the DMG's. Recently we've started encountering a problem opening the DMG's after they've recently been opened and closed. After opening and closing a DMG. when we try to open it again from the same user/connected computer or any other user/computer we see an error message saying "The following disk images couldn't be opened" NAME OF DMG "Resource temporarily unavailable". This happened to several users with several DMG's.
We have since restarted the server, which appeared to fix the problem for about a week and now we are having the same issue again.
The only changes made recently have been an update to version 4.2 of our ISIS 5000 which all of the Avid systems edit off of, but I don't beleive that to be the cause of the DMG opening issue. I suspect it might be caused by the Pram still thinking that the DMG's are open when they've already been closed.
Not sure if this is relevant, but we had been running only Mac OS 10.7 systems connected to the server but within the last few months we've been adding several more systems including those with OS 10.8.
Has anyone else encountered this issue? Does anyone know the fix to this problem?
Thanks for any and all help!

Also, we have been able to copy the DMGs to desktops and external drives, which normally would not be possible when a DMG is currently open by another user which is the standard situation in which a DMG would say "Resource Temporarily Unavailable".
After copying to another location, they open normally so we believe it is an issue isolated to the server itself.
Thanks!

Open Environment error : Resource temporarily unavailable

Hi,
I use Berkeley DB 4.5.2 in a system with Intel PXA255, 64MB memory, 512MB USB disk. The system is Linux 2.4.18, compiler is arm-linux-gcc 2.95.3. I put database files on the USB disk (because the file size is more than 72MB), and the disk still got 70% free space (so I don't think the problem is caused by the disk space).
The same program is run pretty well on PC, Intel P4 3.0, 512MB memory, Red hat Linux 4.2 Enterprise (Linux 2.6.9-22), compiler is gcc 4.3.3.
But it could not even open the Environment on the board. One program shows error message:
Environment open failed: Resource temporarily unavailable.
The other program shows error message:
unhandled page fault at pc=0x00019808, lr=0x000197f4 (bad address=0x000000dc, code 0)
pc : [<00019808>] lr : [<000197f4>] Not tainted
sp : bffff528 ip : bffff700 fp : bffff804
r10: 402d62fc r9 : 402d5c88 r8 : 0001ee90
r7 : 00000001 r6 : 00008a24 r5 : 4001e724 r4 : bffffce4
r3 : 00000000 r2 : 00029cf0 r1 : bffff71c r0 : bffff700
Flags: nzcv IRQs on FIQs on Mode USER_32 Segment user
Control: 397F Table: A3DF8000 DAC: 00000015
Segmentation fault
They are using the same code:
#define __DEBUG 1
ret = db_env_create(&VitalEnv, 0);
if (0 != ret)
#if __DEBUG
fprintf(stderr, "Error in creating environment handle: %s.\n", db_strerror(ret));
#endif
return ret
}/*endif*/
env_flags = DB_CREATE | DB_INIT_MPOOL;
ret = VitalEnv->open(VitalEnv, "./Data", env_flags, 0);
if (0 != ret)
#if __DEBUG
fprintf(stderr, "Environmet open failed: %s.\n", db_strerror(ret));
#endif
return ret;
}/*endif*/
The only difference is that I put these codes in a function called OpenDB() for the second program, and just put these codes in main() for the first program.
And both of them could not open environment.
I have put the arm version libdb-4.5.so on the USB disk. Everything I did but the problem is still there.

Hi Lesslielee,
We will try to fix first the "Resource temporarily unavailable" issue. Is not very clear for me which/what/where application/databases you had moved and when.
Do you have Berkeley DB's additional error reporting turned on? With the error reporting turned on, do you see any additional error information when this exception is thrown? ( http://www.oracle.com/technology/documentation/berkeley-db/db/ref/debug/runtime.html )
From what I understand, when you are storing the databases on the disk (not on the USB drive), the tests are running well, right? When you are moving the database files on the USB drive, are you also moving the environment files? Storing environment files on an NFS file system is not supported.
When Berkeley DB database environment shared memory regions are backed by the filesystem, it is a common application error to create database environments backed by remote filesystems such as the Network File System (NFS), Windows network shares (SMB/CIFS) or the Andrew File System (AFS). Remote filesystems rarely support mapping files into process memory, and even more rarely support correct semantics for mutexes if the mapping succeeds. For this reason, we recommend database environment directories be created in a local filesystem.
Does the problem occur when you run the application for the first time in the new configuration? How did you moved the databases? How did you closed the environment last time?
For more information, please see the "Remote filesystems" section of the Berkeley DB Reference Guide, available in your download package or on our web site at: http://www.oracle.com/technology/documentation/berkeley-db/db/ref/env/remote.html
Thanks,
Bogdan Coman

Login: fork: Resource temporarily unavailable - how can i fix this?

I use Terminal to log in remotely to some off-site unix servers. Previously, I could open several terminal shells at once, but lately if I try to open more than one, I get this message: <login: fork: Resource temporarily unavailable>. Any ideas how to fix this? There was a suggestion here: http://ruminate.net/pdm/mt/osx_tips/os_x_tiger_104_process_limitssolution.html but I'm not sure how to implement it. Thanks for any help.
iMac (G5) Mac OS X (10.4.5)

I'm glad it's working for you, but am not convinced that the firewall was the problem.
The error message you got means that the server didn't have enough resources to process your login. This could be insufficient RAM, disk space or, more likely process space. If the server is very busy and has lots of processes running it can't fork a new process for your login.
Problems like that are usually transient - trying again a few minutes later may work since some processes have finished and have freed up process space.
You should look at what's running on the server and take whatever steps you think appropriate to reduce the number of processes running.

Cron Daemon messages: fork: Resource temporarily unavailable

Cron Daemon sometime sends this message on Mac OSX 10.4.11:
/usr/local/bin/somescript: fork: Resource temporarily unavailable
What is this so? How can I ignore this problem?
Zoli

It is not sufficient to say that only "web, mail, ftp and dns" are running on the server.
Each of these can consume multiple resources based on load.
Apache, for example, maintains one parent process, plus one process for each active connection. If your server is busy serving many requests this could easily ramp up several hundred processes, so do not think of it as one.
Likewise with Mail (which I'm going to guess is the real culprit).
In addition to the main smtp process, there may be multiple processes for multiple incoming mail messages. If you're running junk mail filtering then each message is getting run through the junk mail processor (that's another process). If you're running spam filtering then you're also spawning multiple spam processes.
Add to that at least one connection per POP user who's retrieving mail, plus one for each IMAP user and, again, you can see how the active process table can quickly fill up, especially if your mail server is getting bombed with thousands of bogus email spam messages.
You should monitor the activity table on the machine to see what's really going on. ps and/or top will give you a better idea of the actual load on the machine.

Export to Export Files backup failing w/Resource temporarily unavailable

Hello,
I'm trying to backup my RAC database through EM using "Export to Export Files" and exporting the entire database. When I run the "Test Disk Backup", the directory tests with success. However, about 11 minutes into the job, the job fails with the errors below. I am using Oracle 10gR2 on Linux x86_64 and trying to do the backup using a Samba server.
ORA-31693: Table data object "SDE_DL"."SDE_BLK_42" failed to load/unload and is being skipped due to error:
ORA-19502: write error on file "/backups/EXPDAT01.DMP", blockno blah
ORA-27072: File I/O error
Linux-x86_64: Error: 11: Resource temporarily unavailable
and on and on...
Any suggestions?
Thank you,
Mimi

Hello Ashok,
This could very well be my problem. I am trying to export 8TB of data! I'll check out the mounting options to figure out how to mount it with the largefiles option.
Mimi

Error "fork failed: Resource temporarily unavailable" when trying to login

I have a problem with a PPC-based server running OS X Server 10.4.11. Suddenly I'm unable to log in via SSH or use ARD (remote desktop) via the admin user account.
In SSH it shows "Received disconnect from 1.2.3.4: 2: fork failed: Resource temporarily unavailable" as error message.
Interestingly I can login directly via root. I wonder how to solve this, just waiting some time, rebooting server, any deeper insight would be welcome ?
Here is what "top" says:
Processes: 83 total, 2 running, 81 sleeping... 188 threads 17:07:16
Load Avg: 0.12, 0.19, 0.15 CPU usage: 0.9% user, 13.6% sys, 85.5% idle
SharedLibs: num = 173, resident = 40.6M code, 4.59M data, 6.96M LinkEdit
MemRegions: num = 6812, resident = 89.3M + 8.34M private, 70.7M shared
PhysMem: 98.0M wired, 123M active, 637M inactive, 858M used, 165M free
VM: 3.41G + 113M 5641936(0) pageins, 33735(0) pageouts
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
20343 AppleVNCSe 0.0% 0:00.06 4 64 51 532K 3.84M 1.76M 33.4M
20338 ARDAgent 0.0% 0:00.36 6 96 76 1.03M 4.34M 2.51M 52.5M
20334 SecurityAg 0.1% 1:21.31 1 68 102 1.63M 16.4M 8.77M 76.9M
20333 authorizat 0.0% 0:00.04 1 31 28 364K 708K 1.20M 27.4M
20332 mcxd 0.0% 0:02.61 1 40 40 604K 7.01M 2.24M 40.3M
20326 WindowServ 0.0% 0:31.07 2 66 45 468K 7.70M 8.21M 63.2M
20321 loginwindo 0.0% 0:00.19 3 94 99 972K 7.72M 3.22M 61.0M
20010 upsd 0.0% 0:23.23 1 36 36 3.80M 732K 3.96M 30.9M
18075 top 8.8% 0:00.44 1 19 22 824K 316K 1.23M 27.0M
18070 perl 4.0% 0:00.91 1 10 155 15.4M+ 38.5M 27.1M+ 63.9M-
18058 perl 0.0% 0:01.40 1 10 155 15.7M 38.5M 27.2M 63.9M
18045 bounce 0.0% 0:00.01 1 16 20 192K 392K 740K 26.8M
18021 smtp 0.0% 0:00.01 1 16 20 208K 452K 804K 26.8M
18020 smtp 0.0% 0:00.01 1 16 20 212K 452K 812K 26.8M
18004 smtp 0.0% 0:00.03 1 16 20 220K 452K 624K 26.8M
17962 smtpd 0.0% 0:00.08 1 22 80 740K 1.45M 2.30M 29.7M
17858 sh 0.0% 0:00.01 1 14 17 196K 764K 820K 27.2M
17843 sshd 0.0% 0:00.09 1 16 42 532K 936K 1.36M 30.0M
17832 proxymap 0.0% 0:00.01 1 16 20 200K 356K 692K 26.7M
17712 smtpd 0.0% 0:00.12 1 22 80 760K 1.45M 2.31M 29.7M
17214 cleanup 0.0% 0:00.13 1 16 20 208K 412K 764K 26.8M
17211 cleanup 0.0% 0:00.13 1 16 20 208K 412K 764K 26.8M
16232 smtpd 0.0% 0:00.23 1 22 80 784K 1.45M 2.34M 29.7M
16231 smtpd 0.0% 0:00.25 1 22 80 784K 1.45M 2.34M 29.7M
16221 smtpd 0.0% 0:00.23 1 22 80 788K 1.45M 2.34M 29.7M
16220 smtpd 0.0% 0:00.27 1 24 80 892K 1.45M 2.43M 29.7M
15845 pickup 0.0% 0:00.02 1 16 20 188K 368K 692K 26.7M
14736 named 0.0% 0:45.48 1 14 25 1.28M 1.46M 2.55M 84.4M
14153 trivial-re 0.0% 0:00.97 1 16 20 244K 380K 756K 26.7M
12301 cupsd 0.0% 0:00.41 2 30 26 280K 636K 924K 27.8M
6814 master 0.0% 0:15.99 1 16 20 220K 296K 584K 26.7M
6807 qmgr 0.0% 4:29.58 1 16 20 516K 396K 1.00M 26.8M
6804 master 0.2% 5:25.26 1 15 20 208K+ 340K 652K+ 26.7M
6791 perl 0.0% 1:30.19 1 15 154 360K 38.5M 19.9M 64.7M
2358 trivial-re 0.0% 0:04.52 1 16 20 384K 380K 892K 26.7M
735 httpd 0.0% 0:35.78 1 12 110 584K 1.80M 1.96M 31.3M
734 httpd 0.0% 0:36.17 1 12 111 592K 1.80M 1.80M 31.3M
733 httpd 0.0% 0:35.51 1 12 110 560K 1.80M 1.91M 31.3M
636 dccifd 0.0% 0:37.46 3 30 27 88K 336K 224K 34.4M
635 dccifd 0.0% 0:00.00 1 8 17 0K 332K 80K 27.2M
373 httpd 0.0% 0:36.51 1 12 111 564K 1.80M 1.91M 31.3M
324 ipfwlogger 0.0% 0:08.18 1 10 18 36K 236K 124K 26.6M
292 httpd 0.0% 0:36.63 1 11 111 540K 1.80M 1.87M 31.3M
283 personalba 0.0% 0:10.65 1 76 45 520K 4.04M 1.60M 38.1M
277 httpd 0.0% 0:53.49 1 9 110 104K 1.80M 1.12M 32.2M
259 mds 0.0% 2:19.01 7 81 52 576K 4.07M 1.54M 41.8M
255 ARDHelper 0.0% 1:04.73 1 9 17 28K 236K 120K 26.6M
251 getty 0.0% 0:00.00 1 14 18 4K 228K 196K 26.6M
236 serialnumb 0.0% 0:29.85 3 27 33 240K 548K 848K 28.3M

Just noticed that this is still open... a reboot did it
However maybe someone has an idea how this happened and how to prevent similar situations in the future, if possible ?

Rctl exceeded "fork: Resource temporarily unavailable"

We experienced some unexpected virtual memory behavior on two new
T1000s so started looking into various resources settings. After
turning on logging using rctladm we started getting messages every few
minutes about various resources being exceeded. We then used projmod
to set the various limits as shown below but continue to get the
syslog messages as if the values had not been set. The processes that
are showing excesses are typically running programs such as nfsmapid,
ncsd, or our own applications, none of which are likely to actually be
exceeding the indicated resources. In fact, pfile indicates that
there are at most about 20 file descriptors of any sort in use by any
of these processes.
### from /var/adm/messages
genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 220
genunix: [ID 883052 kern.notice] privileged rctl process.max-stack-size (value 9223372036854775807) exceeded by process 2886
genunix: [ID 883052 kern.notice] basic rctl process.max-stack-size (value 8388608) exceeded by process 502
# uname -a
SunOS mastiff 5.10 Generic_118833-23 sun4v sparc SUNW,Sun-Fire-T1000
# cat /etc/project
system:0::::process.max-file-descriptor=(basic,1024,deny),(privileged,65500,deny)
user.root:1::::process.max-file-descriptor=(basic,1024,deny),(privileged,65500,deny)
noproject:2::::
default:3::::process.max-file-descriptor=(basic,10240,deny),(privileged,65500,deny);process.max-stack-size=(basic,134217728,deny);project.max-shm-memory=(privileged,32212254720,deny)
group.staff:10::::
# swap -l
swapfile dev swaplo blocks free
/dev/dsk/c0t1d0s1 32,1 16 52436912 52399520
# swap -s
total: 4780856k bytes allocated + 225120k reserved = 5005976k used, 27745432k available
1) Is it expected that an out-of-the-box T1000 should be exceeding
resources with normal system programs?
2) Why does the setting of new process.max-file-descriptor not appear
to affect the limits of new processes in the project?
3) Could any of this be related to the original problem we are having
that one can allocate memory only up to the point that physical memory
is almost full at which point the allocation slows down to almost
nothing and other processes get the error "fork: Resource temporarily
unavailable"?

How many process currently running
The process statistics utility, prstat, shows us a top-level summary of the processes that are using system resources. The prstat utility summarizes this information every 5 seconds by default and reports the statistics for that period.
The -L option causes prstat to show one thread per line instead of one process per line.
How many process running for per user
Again you can use prstat with the below option .
-u euidlist
Report only processes whose effective user ID is in
the given list. Each user ID may be specified as
either a login name or a numerical user ID.
No. of opened files for per process.
A list of files open within a process can be obtained with the pfiles command.
Total no. of opened files for all process.
Try running lsof as root . One open file is displayed per line and, unless you specify otherwise, all open files from all processes are displayed.
No. of process limit
Check out this link :
http://blogs.sun.com/hasham/entry/solaris_10_increasing_number_of
No. of open file limit
Each process has a hard and soft limit for the number of files it can have opened at any time; these limits are administered through the Resource Controls infrastructure by process.max-file-descriptor . Limits can be viewed with the prctl command.
$ prctl -n process.max-file-descriptor $$
process: 21471: -ksh
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
process.max-file-descriptor
basic 256 - deny 21471
privileged 65.5K - deny -
system 2.15G max deny -
If no resource controls are set for the process, then the defaults are taken from system tuneables; rlim_fd_max is the hard limit, and rlim_fd_cur is the current limit (or soft limit). You can set these parameters systemwide by placing entries in the /etc/system file.
set rlim_fd_max=8192
set rlim_fd_cur=1024
The limits can be set from the shell also using the limit/ulimit commands.

-bash: fork: Resource temporarily unavailable

i cannot find an answer or fix to this problem.
if i open a terminal as any user (i have a couple of user accounts in case i have
problems with one), i get the message
-bash: fork: Resource temporarily unavailable
first, what is causing this?
second, how can i fix this? i need to use my terminal to work and i can't.

No expert by any means, but historical posts going back to OS X 10.4 indicate this is a limit on number of concurrent processes and is controlled by a number of config files. Do a search on "fork: resource temporarily unavailable" and you'll start to find the discussion.
I'm trying to decide whether I want to try the fixes for the thing I'm trying to do or find an OS X server and run it where it is designed to run in the first place. I'm trying to run this particular software on OS X 10.6 desktop and getting the error. I'm assuming OS X server has fewer governors on it and can run more processes.

IOException Resource temporarily unavailable

I have a program that opens a socket and listens for udp packets. The code snippet code goes like this
while( true )
byte[] buf = new byte[ 2048 ];
DatagramPacket p = new DatagramPacket( buf, buf.length );
try { socket.receive( p ); }
catch( IOException exc )
log("Socket read error: " + exc.getMessage());
break;
//... do something with p
My program works fine until I get this "Resource temporarily unavailable" exception. (I dont use nio classes) Iam on linux 8.0 with JRE1.5..
When does this exception occur ? Is there any workaround ? It looks like this would be thrown when no data is available on the socket (but I dont get this in Windows) Any help would be greatly appreciated.

First off, what do you mean you use linux 8.0? What distribution is that?
Is the exception that is being thrown an IOException? I just want to make sure the problem is actually happening at the socket.receive(p) line.
You can also try to print the stack trace of the exception by doing this: exec.printStackTrace()
That might tell you what class is throwing the exception which will give a clue as to what resource it needs to allocate but cannot.
Nick

EDC5112I Resource temporarily unavailable.; _errno= X'00000070' (112) error

Our application is a simple JRIO code which writes into a VSAM file. The jar which does this job is also housed under the Mainframe. For the past few months we are getting the below exception
EDC5112I Resource temporarily unavailable.; errno= X'00000070' (112), errno2= X'00000000' (0)
     at com.ibm.recordio.os390nonvsam.NativeException.throwIoExWithUntranslatedMessage(NativeException.java(Compiled Code))
     at com.ibm.recordio.os390nonvsam.NativeException.rethrow(NativeException.java(Compiled Code))
     at com.ibm.recordio.os390nonvsam.FileOutputRecordStream.flush(FileOutputRecordStream.java(Compiled Code))
     at com.aviva.nui.transformer.FixedFileFormatter.writefile(FixedFileFormatter.java(Compiled Code))
     at com.aviva.nui.transformer.FixedFileFormatter.generateFixLengthIndexFeedFile(FixedFileFormatter.java(Compiled Code))
     at com.aviva.nui.transformer.AFEndPoint.execute(AFEndPoint.java(Compiled Code))
     at com.aviva.nui.af.bridging.EndpointCallerJava.callIn(Unknown Source)
     at com.aviva.nui.af.RequestContext.callEndpoint(Unknown Source)
     at com.aviva.nui.af.AFMain.callIn(Unknown Source)
I have found from an IBM forum the below description
The forum had the decription as :
External Symptoms:
msgedc5112i error may be raised when using jrio .
Systems with High Processing or Low CP Processing
Resource Availability.
When using JRIO you may encounter:
Loader:main:IOException:EDC5112I
Resource temporarily unavailable.;
errno= X'00000070' (112), _errno2= X'0594003D' (93585469)
I am not really sure what the two errnos say and what difference does it make if they are different.
The solution that was given for above issue was : update recordio.jar and libJrioOS390.so
Can some one please help me with the above error.The problem is this error does not occur always. It happens occasionaly only. Say 3 or 4 times a month.
Many thanks in advance
chilloutnhell

Just noticed that this is still open... a reboot did it
However maybe someone has an idea how this happened and how to prevent similar situations in the future, if possible ?

GUI problem :10035 wsaewouldblock : resource temporarily unavailable

Similar Messages

Maybe you are looking for