GUI related problem in solaris 8 02/04
Hello all,
I am facing GUI related problem in the software running on solaris when I upgraded from solaris 8 02/02 to 8 02/04.
The GUI which was working fine on 02/02 was giving some menu selection problem in 02/04. In GUI applications i was unable to select items after double clicking it in solaris 8 02/04 while it was working fine in solaris 8 02/02.
Are there any O.S. related problem?
Thanks and regards,
Ankit
Wolfgang073 wrote:
Hi guys and ladys!
I added the LD_LIBRARY_PATH, Why are you doing that. It's probably a bad idea.
but the Openwindows not run OK (e.g. start cmdtool window without csh % prompt etc.).That's very possible. Don't make global changes to LD_LIBRARY_PATH (by putting in your login files for example). Instead if you need it to run a particular program, make a wrapper that sets the variable and then calls the program. That will limit the scope of those changes.
vi .login
# Erasing LD_LIBRARY_PATH
setenv LD_LIBRARY_PATH
# Important Paths set
setenv LD_LIBRARY_PATH /usr/ucblib:$LD_LIBRARY_PATHDon't do that.
Darren
Similar Messages
-
Metainit/striping problem on Solaris 9
We are trying to deploy the Apple XServe RAIDS to customers running Solaris 9. The issue is that Solaris 9 will not recognize a device/LUN that is > 2TB. (No problem with Solaris 10) In trying to solve this problem, we sliced a 7 disk (4.09 TB) RAID into 3 slices. This presents three 1.36TB disks to the Solaris system. Basically, we have 6 disks being presented across both controllers to Solaris. They are direct connected from the XServe to a dual port QLogic HBA. The problem comes in when you try to create a stripe/concatenation across the logical devices being presented. (The disks are being presented on C4 and C5)
Results from a format AFTER I split both 7 disk RAID5s into 3 slices.
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@1c,600000/scsi@2/sd@0,0
1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@1c,600000/scsi@2/sd@1,0
2. c1t2d0 <SEAGATE-ST373307LSUN72G-0507 cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@2,0
3. c1t3d0 <SEAGATE-ST373307LSUN72G-0507 cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@3,0
4. c4t600039300001F461d0 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3/fp@0,0/ssd@w600039300001f461,0
5. c4t600039300001F461d1 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3/fp@0,0/ssd@w600039300001f461,1
6. c4t600039300001F461d2 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3/fp@0,0/ssd@w600039300001f461,2
7. c5t600039300001F2ECd0 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3,1/fp@0,0/ssd@w600039300001f2ec,0
8. c5t600039300001F2ECd1 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3,1/fp@0,0/ssd@w600039300001f2ec,1
9. c5t600039300001F2ECd2 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3,1/fp@0,0/ssd@w600039300001f2ec,2
Specify disk (enter its number):
Results of the cfgadm command. You will see there three logical devices presented to each controller. Six disks.
cfgadm -al -o showFCPdev
Ap_Id Type Receptacle Occupant Condition
c4 fc-private connected configured unknown
c4::600039300001f461,0 disk connected configured unknown
c4::600039300001f461,1 disk connected configured unknown
c4::600039300001f461,2 disk connected configured unknown
c5 fc-private connected configured unknown
c5::600039300001f2ec,0 disk connected configured unknown
c5::600039300001f2ec,1 disk connected configured unknown
c5::600039300001f2ec,2 disk connected configured unknown
Trying to initialize a 6 device stripe via Solaris Volume Manager (AKA disksuite)
metainit -f d77 6 1 c4t600039300001F461d0s0 1 c4t600039300001F461d1s0 1 c4t600039300001F461d2s0 1 c5t600039300001F2ECd0s0 1 c5t600039300001F2ECd1s0 1 c5t600039300001F2ECd2s0
I receive the following error:
metainit: hostname: c4t600039300001F461d1s0: overlaps with device in d77
I tried to do a work around where I create three striped devices then concatenate them:
Creating the first 2 device stripe across controllers c4 and c5 (1 device each)
metainit -f d77 2 1 c4t600039300001F461d0s0 1 c5t600039300001F2ECd0s0
I was able to create the first metadevice d77 using one logical LUN from each controller.
When I tried to create a second metadevice across the controllers: (Using d1 from each controller)
metainit -f d78 2 1 c4t600039300001F461d1s0 1 c5t600039300001F2ECd1s0
metainit: hostneme: c4t600039300001F461d1s0: overlaps with device in d77
I received the same error.
In doing some reaearch, it seems the problem is due to a problem with the disk duplication process, disk device IDs stored on the disks are not unique. I was curious if this is the problem that Apple presents the split disks with the SAME diskid? Has anybody else successfully created stripes (due to a LUN size limit) across the disk successfully on a Solaris system?I contacted Sun and here is an explination from them. I also noticed when I queried the Xserver RAIDS, there were no serial numbers.
Solaris 9 can support a 16Tb filesystem, but there is a scsi limitation on the device of 2Tb. So you are stuck with striping together several smaller devices if you want a single filesystem above 2Tb.
The problem you are having when metainit reports an overlap comes from the way Solaris Volume Manager identifies devices. The portion of the scsi inquiry that is returned is always unique when Sun firmware is involved, but in your case is not unique.
You may be able to make use of the appended infodoc to avoid this problem. I see no evidence of our having tested this with your particular scenario, but it has been successful in similar cases.
You might also inquire of whoever supports your storage device whether a mode is supported whereby the device's inquiry strings can be made unique.
Here is the steps he wanted me to take and the results. I still can not get the Xserve RAIDS to generate a unique device id:
Step 1
Determine the vendor and product strings. You can run these commands:
# netstat -k | grep -i vendor
# netstat -k | grep -i product
netstat -k | grep -i vendor
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
grep -i product
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
or you can run
# format -e
then select scsi, then inquiry.
scsi> inq
Inquiry:
00 00 05 12 5b 00 00 02 41 50 50 4c 45 20 20 20 ....[...APPLE
58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 Xserve RAID
31 2e 35 31 63 00 00 00 00 00 00 00 00 00 00 00 1.51c...........
00 00 00 00 00 00 00 00 00 00 0d 40 0d a0 0e 20 ...........@...
0d 80 09 00 0a 00 00 20 00 00 00 20 20 20 20 20 ....... ...
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
Vendor: APPLE
Product: Xserve RAID
Revision: 1.51
Removable media: no
Device type: 0
ISO version: 0
ECMA version: 0
ANSI version: 5
Async event notification: no
Terminate i/o process msg: no
Response data format: 2
Additional length: 91
Relative addressing: no
32 bit transfers: no
16 bit transfers: no
Synchronous transfers: no
Linked commands: no
Command queueing: yes
Soft reset option: no
Step 2
Add an entry in the file '/kernel/drv/sd.conf'.
sd-config-list=
"APPLE Xserve RAID ", "AppleRAID";
AppleRAID=1,0x8,0,0,0,0,0;
Step 3 Reboot.
Step 4 Check with SUNWexplo.
[email protected]:[/opt/SUNWexplo/bin] (8)# ./diskinfo.sparc
/dev/rdsk/c0t0d0s2: Device busy
AVAILABLE SCSI DEVICES:
Location Vendor Product Rev Serial #
c1t0d0 COMPAQ BD036863AC HPB5 B2FT4HMM
c1t1d0 SEAGATE ST336607LSUN36G 0507 0349A66VKQ
c1t2d0 SEAGATE ST373307LSUN72G 0507 0417B7C9ZC
c1t3d0 SEAGATE ST373307LSUN72G 0507 0425B7LV5Q
c4t600039300001F461d0 APPLE Xserve RAID 151 c
c4t600039300001F461d1 APPLE Xserve RAID 151 c
c4t600039300001F461d2 APPLE Xserve RAID 151 c
c5t600039300001F2ECd0 APPLE Xserve RAID 151 c
c5t600039300001F2ECd1 APPLE Xserve RAID 151 c
As you will notice, there are no serial numbers in this command or netstat -k | grep -i product commands. -
Content Server 6.0 Installation problem on Solaris
When I installed Content_Server_6.0_SP1_solaris_oracle on Solaris 10 ,I get the following error in log file.
dbg Bundled JRE is not binary compatible with host OS/Arch or it is corrupt. Testing bundled JRE failed.
How can I resolve it
please help me.
Regards
SandeepIf I installed any installer for sparc Machine on x86.is there any problem.My Solaris machine is x86.
thanx.
Regards
Sandeep. -
Focus Problem on Solaris with jdk 1.3.1
Hi all,
We are having a focus problem on Solaris. The same code works fine on Windows without any problem.
I am sending the test code and run steps below which you can compile and repeat the problem.
NOTE: When we put a comment on the line "f1.requestFocus();" in TestFocus.java it works OK.
Run Steps :
1. Run TestFocus.class
2. A JFrame appears with 2 text field and a button
3. Try to write something on the text fields. It works OK.
4. Click the button to open a new JFrame
5. A new JFrame opens with a single text field and a button.
6. Click the button to close the second frame
7. You are now on the main JFrame
8. Try to write something on the text fields. It works OK.
9. Repeat the steps 4-7
10. Try to write something on the text fields. You are able to focus and write on the first field. BUT you cannot select or write the second Field!
JAVA SOURCE FILES :
PenHesapListener.java :
public interface PenHesapListener extends java.util.EventListener {
void tamam_actionPerformed(java.util.EventObject newEvent);
void iptal_actionPerformed(java.util.EventObject newEvent);
------PenHesapLisEventMulticaster.java----------------------------------
public class PenHesapLisEventMulticaster extends java.awt.AWTEventMulticaster implements PenHesapListener {
* Constructor to support multicast events.
* @param a java.util.EventListener
* @param b java.util.EventListener
protected PenHesapLisEventMulticaster(java.util.EventListener a, java.util.EventListener b) {
super(a, b);
* Add new listener to support multicast events.
* @return muhasebe.HesappenListener
* @param a muhasebe.HesappenListener
* @param b muhasebe.HesappenListener
public static PenHesapListener add(PenHesapListener a, PenHesapListener b) {
return (PenHesapListener)addInternal(a, b);
* Add new listener to support multicast events.
* @return java.util.EventListener
* @param a java.util.EventListener
* @param b java.util.EventListener
protected static java.util.EventListener addInternal(java.util.EventListener a, java.util.EventListener b) {
if (a == null) return b;
if (b == null) return a;
return new PenHesapLisEventMulticaster(a, b);
* @return java.util.EventListener
* @param oldl muhasebe.HesappenListener
protected java.util.EventListener remove(PenHesapListener oldl) {
if (oldl == a) return b;
if (oldl == b) return a;
java.util.EventListener a2 = removeInternal(a, oldl);
java.util.EventListener b2 = removeInternal(b, oldl);
if (a2 == a && b2 == b)
return this;
return addInternal(a2, b2);
* Remove listener to support multicast events.
* @return muhasebe.HesappenListener
* @param l muhasebe.HesappenListener
* @param oldl muhasebe.HesappenListener
public static PenHesapListener remove(PenHesapListener l, PenHesapListener oldl) {
if (l == oldl || l == null)
return null;
if(l instanceof PenHesapLisEventMulticaster)
return (PenHesapListener)((PenHesapLisEventMulticaster) l).remove(oldl);
return l;
public void tamam_actionPerformed(java.util.EventObject newEvent) {
((PenHesapListener)a).tamam_actionPerformed(newEvent);
((PenHesapListener)b).tamam_actionPerformed(newEvent);
public void iptal_actionPerformed(java.util.EventObject newEvent) {
((PenHesapListener)a).iptal_actionPerformed(newEvent);
((PenHesapListener)b).iptal_actionPerformed(newEvent);
---------TestFocus2.java-----------------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
public class TestFocus2 extends JFrame implements ActionListener
protected transient PenHesapListener PenhListener = null ;
JTextField f10 = null;
JButton b10= null ;
JTextField f1 = new JTextField() ;
JButton b1 = new JButton() ;
JFrame f20 = null;
public TestFocus2()
getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
getContentPane().add(f1);
getContentPane().add(b1);
pack();
setVisible(true);
b1.addActionListener(this);
public void actionPerformed(ActionEvent e)
if(e.getSource() == b1)
fireTamam_actionPerformed(e);
public void addPenHesapListener(PenHesapListener newListener)
PenhListener = PenHesapLisEventMulticaster.add(PenhListener, newListener);
return;
protected void fireTamam_actionPerformed(java.util.EventObject newEvent) {
PenhListener.tamam_actionPerformed(newEvent);
this.setVisible(false);
protected void fireiptal_actionPerformed(java.util.EventObject newEvent) {
PenhListener.iptal_actionPerformed(newEvent);
public static void main(String x[])
TestFocus2 gen01 = new TestFocus2();
--------TestFocus.java-----------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
import java.awt.Container;
public class TestFocus extends JFrame implements ActionListener
PenKreKart aPenKreKart = null ;
Container ctn = null;
JTextField f10 = null;
JButton b10= null ;
JTextField f1 = new JTextField() ;
JTextField f2 = new JTextField() ;
JButton b1 = new JButton() ;
JFrame f20 = null;
public TestFocus()
//aPenKreKart = new PenKreKart(true);
//aPenKreKart.aTemelPencere.setVisible(false);
getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
getContentPane().add(f1);
getContentPane().add(f2);
getContentPane().add(b1);
pack();
setVisible(true);
b1.addActionListener(this);
public void actionPerformed(ActionEvent e)
if(e.getSource() == b1)
pencere_islemi();
// pencere koyma k?sm? .. begin
public void pencere_islemi() {
ctn = this;
ctn.setEnabled(false);
TestFocus2 fpen = new TestFocus2();
//aPenKreKart.aTemelPencere.setVisible(true); //buras?
//aPenKreKart.aTemelPencere.addPenHesapListener(new PenHesapListener() {
fpen.addPenHesapListener(new PenHesapListener() {
// metod tamam_actionPerformed begin...
public void tamam_actionPerformed(java.util.EventObject newEvent) {
ctn.setEnabled(true);
ctn.requestFocus();
// Problem is when we comment the below line it works .....
f1.requestFocus();
System.out.println("tamam");
// metod tamam_actionPerformed end...
// metod iptal_actionPerformed begin...
public void iptal_actionPerformed(java.util.EventObject newEvent) {
ctn.setEnabled(true);
ctn.requestFocus();
System.out.println("iptal");
// metod iptal_actionPerformed begin...
// pencere koyma k?sm? .. end
public static void main(String x[])
TestFocus gen01 = new TestFocus();Hi all,
We are having a focus problem on Solaris. The same code works fine on Windows without any problem.
I am sending the test code and run steps below which you can compile and repeat the problem.
NOTE: When we put a comment on the line "f1.requestFocus();" in TestFocus.java it works OK.
Run Steps :
1. Run TestFocus.class
2. A JFrame appears with 2 text field and a button
3. Try to write something on the text fields. It works OK.
4. Click the button to open a new JFrame
5. A new JFrame opens with a single text field and a button.
6. Click the button to close the second frame
7. You are now on the main JFrame
8. Try to write something on the text fields. It works OK.
9. Repeat the steps 4-7
10. Try to write something on the text fields. You are able to focus and write on the first field. BUT you cannot select or write the second Field!
JAVA SOURCE FILES :
PenHesapListener.java :
public interface PenHesapListener extends java.util.EventListener {
void tamam_actionPerformed(java.util.EventObject newEvent);
void iptal_actionPerformed(java.util.EventObject newEvent);
------PenHesapLisEventMulticaster.java----------------------------------
public class PenHesapLisEventMulticaster extends java.awt.AWTEventMulticaster implements PenHesapListener {
* Constructor to support multicast events.
* @param a java.util.EventListener
* @param b java.util.EventListener
protected PenHesapLisEventMulticaster(java.util.EventListener a, java.util.EventListener b) {
super(a, b);
* Add new listener to support multicast events.
* @return muhasebe.HesappenListener
* @param a muhasebe.HesappenListener
* @param b muhasebe.HesappenListener
public static PenHesapListener add(PenHesapListener a, PenHesapListener b) {
return (PenHesapListener)addInternal(a, b);
* Add new listener to support multicast events.
* @return java.util.EventListener
* @param a java.util.EventListener
* @param b java.util.EventListener
protected static java.util.EventListener addInternal(java.util.EventListener a, java.util.EventListener b) {
if (a == null) return b;
if (b == null) return a;
return new PenHesapLisEventMulticaster(a, b);
* @return java.util.EventListener
* @param oldl muhasebe.HesappenListener
protected java.util.EventListener remove(PenHesapListener oldl) {
if (oldl == a) return b;
if (oldl == b) return a;
java.util.EventListener a2 = removeInternal(a, oldl);
java.util.EventListener b2 = removeInternal(b, oldl);
if (a2 == a && b2 == b)
return this;
return addInternal(a2, b2);
* Remove listener to support multicast events.
* @return muhasebe.HesappenListener
* @param l muhasebe.HesappenListener
* @param oldl muhasebe.HesappenListener
public static PenHesapListener remove(PenHesapListener l, PenHesapListener oldl) {
if (l == oldl || l == null)
return null;
if(l instanceof PenHesapLisEventMulticaster)
return (PenHesapListener)((PenHesapLisEventMulticaster) l).remove(oldl);
return l;
public void tamam_actionPerformed(java.util.EventObject newEvent) {
((PenHesapListener)a).tamam_actionPerformed(newEvent);
((PenHesapListener)b).tamam_actionPerformed(newEvent);
public void iptal_actionPerformed(java.util.EventObject newEvent) {
((PenHesapListener)a).iptal_actionPerformed(newEvent);
((PenHesapListener)b).iptal_actionPerformed(newEvent);
---------TestFocus2.java-----------------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
public class TestFocus2 extends JFrame implements ActionListener
protected transient PenHesapListener PenhListener = null ;
JTextField f10 = null;
JButton b10= null ;
JTextField f1 = new JTextField() ;
JButton b1 = new JButton() ;
JFrame f20 = null;
public TestFocus2()
getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
getContentPane().add(f1);
getContentPane().add(b1);
pack();
setVisible(true);
b1.addActionListener(this);
public void actionPerformed(ActionEvent e)
if(e.getSource() == b1)
fireTamam_actionPerformed(e);
public void addPenHesapListener(PenHesapListener newListener)
PenhListener = PenHesapLisEventMulticaster.add(PenhListener, newListener);
return;
protected void fireTamam_actionPerformed(java.util.EventObject newEvent) {
PenhListener.tamam_actionPerformed(newEvent);
this.setVisible(false);
protected void fireiptal_actionPerformed(java.util.EventObject newEvent) {
PenhListener.iptal_actionPerformed(newEvent);
public static void main(String x[])
TestFocus2 gen01 = new TestFocus2();
--------TestFocus.java-----------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
import java.awt.Container;
public class TestFocus extends JFrame implements ActionListener
PenKreKart aPenKreKart = null ;
Container ctn = null;
JTextField f10 = null;
JButton b10= null ;
JTextField f1 = new JTextField() ;
JTextField f2 = new JTextField() ;
JButton b1 = new JButton() ;
JFrame f20 = null;
public TestFocus()
//aPenKreKart = new PenKreKart(true);
//aPenKreKart.aTemelPencere.setVisible(false);
getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
getContentPane().add(f1);
getContentPane().add(f2);
getContentPane().add(b1);
pack();
setVisible(true);
b1.addActionListener(this);
public void actionPerformed(ActionEvent e)
if(e.getSource() == b1)
pencere_islemi();
// pencere koyma k?sm? .. begin
public void pencere_islemi() {
ctn = this;
ctn.setEnabled(false);
TestFocus2 fpen = new TestFocus2();
//aPenKreKart.aTemelPencere.setVisible(true); //buras?
//aPenKreKart.aTemelPencere.addPenHesapListener(new PenHesapListener() {
fpen.addPenHesapListener(new PenHesapListener() {
// metod tamam_actionPerformed begin...
public void tamam_actionPerformed(java.util.EventObject newEvent) {
ctn.setEnabled(true);
ctn.requestFocus();
// Problem is when we comment the below line it works .....
f1.requestFocus();
System.out.println("tamam");
// metod tamam_actionPerformed end...
// metod iptal_actionPerformed begin...
public void iptal_actionPerformed(java.util.EventObject newEvent) {
ctn.setEnabled(true);
ctn.requestFocus();
System.out.println("iptal");
// metod iptal_actionPerformed begin...
// pencere koyma k?sm? .. end
public static void main(String x[])
TestFocus gen01 = new TestFocus(); -
Problem description:
I have ordered a new iMac but my current one seems to be running really slowly. I believe it to be a memory related problem but can’t seem to identify what is causing it. Your help is greatly appreciated.
EtreCheck version: 2.1.8 (121)
Report generated March 7, 2015 at 4:01:26 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (24-inch, Early 2008) (Verified)
iMac - model: iMac8,1
1 2.8 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR2 SDRAM 800 MHz ok
BANK 1/DIMM1
1 GB DDR2 SDRAM 800 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1920 x 1200
System Software: ℹ️
OS X 10.10 (14A389) - Time since boot: 23 days 18:5:35
Disk Information: ℹ️
ST3320820AS_Q disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 319.21 GB (195.05 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
HP Officejet 6000 E609n
Apple, Inc. Keyboard Hub
Primax Electronics Apple Optical USB Mouse
Apple, Inc Apple Keyboard
Apple Inc. Built-in iSight
Western Digital External HDD 500.11 GB
My Passport (disk1s1) /Volumes/My Passport : 500.11 GB (200.60 GB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Popcorn 4/Popcorn.app
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
/System/Library/Extensions
[not loaded] com.aliph.driver.jstub (1.1.2 - SDK 10.7) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.accountsd.plist
[killed] com.apple.AirPlayUIAgent.plist
[killed] com.apple.bird.plist
[killed] com.apple.CalendarAgent.plist
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cloudd.plist
[killed] com.apple.cmfsyncagent.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.coreservices.uiagent.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.pluginkit.pkd.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.rcd.plist
[killed] com.apple.recentsd.plist
[killed] com.apple.sbd.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.secd.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.spindump_agent.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
22 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.diagnosticd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.GSSCred.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.softwareupdated.plist
[killed] com.apple.spindump.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
[killed] org.cups.cupsd.plist
20 processes killed due to memory pressure
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.sonos.smbbump.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
Jawbone Updater Application (/Applications/Jawbone Updater.app)
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
Photo Center Plugin: Version: Photo Center Plugin 1.1.2.2 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
CitrixICAClientPlugIn: Version: 11.2.0 [Click for support]
iPhotoPhotocast: Version: 7.0
3rd Party Preference Panes: ℹ️
Citrix Online Plug-in [Click for support]
Flash Player [Click for support]
UE Smart Radio [Click for support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 319.21 GB Disk used: 124.16 GB
Destinations:
Time Machine Backups [Local]
Total size: 3.00 TB
Total number of backups: 98
Oldest backup: 2013-08-28 05:45:36 +0000
Last backup: 2014-12-30 19:39:32 +0000
Size of backup disk: Excellent
Backup size 3.00 TB > (Disk size 319.21 GB X 3)
Top Processes by CPU: ℹ️
5% com.apple.WebKit.Plugin.64
3% WindowServer
2% sysmond
0% AppleSpell
0% com.apple.WebKit.Networking
Top Processes by Memory: ℹ️
41 MB Finder
41 MB iTunes
37 MB Safari
32 MB com.apple.WebKit.Plugin.64
32 MB mds
Virtual Memory Information: ℹ️
53 MB Free RAM
501 MB Active RAM
463 MB Inactive RAM
398 MB Wired RAM
78.46 GB Page-ins
3.04 GB Page-outs
Diagnostics Information: ℹ️
Mar 7, 2015, 12:41:34 PM /Library/Logs/DiagnosticReports/Inkjet4_2015-03-07-124134_[redacted].crash
Mar 5, 2015, 07:42:29 PM /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-03-05-194229_[ redacted].crashThat certainly looks like a low memory issue, 2 GB ram is barely enough to run Mac OS X versions from Lion through Yosemite. The high number of Page Outs and killed processes show very high memory pressure.
Try adding memory, but be sure it is high quality, Mac certified memory such as that from OWC, http://www.macsales.com or Crucial, http://www.crucial.com -
Rsh disconnect problems in Solaris 10
My company uses rsh to transmit data to proprietary cards, from Ultra 25's running Solaris 10. We're experiencing random timeouts. The error is rsh connection timeout.
We never had this problem on Solaris 8 or Solaris 7.
Has anyone run across this before? It's to random to run snoop on. Thanks Marktype passwd mgcusr as root. then you'll need to type new password for that user.
-
Problems with Solaris 11 11/11
Hi,
I need your help because I have problems with Solaris 11 11/11 installed in a Dell Latitude E4310.
Here, there are the problems:
1- No it power off with shutdown or init 5 or init 0 only work well the reboot.
2- It can not connect to the wifi with wpa, no receive ip by dhcp, the driver of the card is "iwp"
Thanks.
Jorge
Edited by: jdangelo on Nov 16, 2011 1:49 PM
Edited by: jdangelo on Nov 17, 2011 2:51 PMHere is the info of my laptop;
Manufacture name:Dell Inc.
Manufacture model:Latitude E4310
64 Bit:True
OS version:SunOS solaris 5.11 11.0 i86pc i386 i86pc
CPU Type:Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz
CPU Number:1
Number Of Cores Per Processor:2
Number Of Threads Per Processor:4
Bios/Firmware Maker:Dell Inc. Version:A05 Release Date:11/20/2010
prtconf -pv:
System Configuration: Oracle Corporation i86pc
Memory size: 3958 Megabytes
System Peripherals (PROM Nodes):
Node 0x000001
bios-boot-device: '80'
stdout: 00000000
name: 'i86pc'
Node 0x000002
existing: 00c21000.00000000.02bc6001.00000000
name: 'ramdisk'
Node 0x000003
acpi-namespace: '\_SB_.PCI0'
compatible: 'pciex_root_complex'
device_type: 'pciex'
reg: 00000000.00000000.00000000.00000000.00000000
#size-cells: 00000002
#address-cells: 00000003
name: 'pci'
Node 0x000004
reg: 00000000.00000000.00000000.00000000.00000000
compatible: 'pci8086,44.1028.410.2' + 'pci8086,44.1028.410' + 'pci1028,410' + 'pci8086,44.2' + 'pci8086,44' + 'pciclass,060000' + 'pciclass,0600'
model: 'Host bridge'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000000
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '0'
class-code: 00060000
revision-id: 00000002
vendor-id: 00008086
device-id: 00000044
name: 'pci1028,410'
Node 0x000005
acpi-namespace: '\_SB_.PCI0.VID_'
assigned-addresses: 83001010.00000000.f0000000.00000000.00400000.c3001018.00000000.e0000000.00000000.10000000.81001020.00000000.000060b0.00000000.00000008.a1001000.00000000.000003b0.00000000.0000000c.a1001000.00000000.000003c0.00000000.00000020.a2001000.00000000.000a0000.00000000.00020000
reg: 00001000.00000000.00000000.00000000.00000000.03001010.00000000.00000000.00000000.00400000.43001018.00000000.00000000.00000000.10000000.01001020.00000000.00000000.00000000.00000008.a1001000.00000000.000003b0.00000000.0000000c.a1001000.00000000.000003c0.00000000.00000020.a2001000.00000000.000a0000.00000000.00020000
compatible: 'pci8086,46.1028.410.2' + 'pci8086,46.1028.410' + 'pci1028,410' + 'pci8086,46.2' + 'pci8086,46' + 'pciclass,030000' + 'pciclass,0300'
model: 'VGA compatible controller'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000000
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
device_type: 'display'
unit-address: '2'
class-code: 00030000
revision-id: 00000002
vendor-id: 00008086
device-id: 00000046
name: 'display'
Node 0x000006
acpi-namespace: '\_SB_.PCI0.GLAN'
assigned-addresses: 8200c810.00000000.f5400000.00000000.00020000.8200c814.00000000.f5480000.00000000.00001000.8100c818.00000000.00006040.00000000.00000020
reg: 0000c800.00000000.00000000.00000000.00000000.0200c810.00000000.00000000.00000000.00020000.0200c814.00000000.00000000.00000000.00001000.0100c818.00000000.00000000.00000000.00000020
compatible: 'pci8086,10ea.1028.410.5' + 'pci8086,10ea.1028.410' + 'pci1028,410' + 'pci8086,10ea.5' + 'pci8086,10ea' + 'pciclass,020000' + 'pciclass,0200'
model: 'Ethernet controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '19'
class-code: 00020000
revision-id: 00000005
vendor-id: 00008086
device-id: 000010ea
name: 'pci1028,410'
Node 0x000007
acpi-namespace: '\_SB_.PCI0.EHC2'
assigned-addresses: 8200d010.00000000.f5470000.00000000.00000400
reg: 0000d000.00000000.00000000.00000000.00000000.0200d010.00000000.00000000.00000000.00000400
compatible: 'pci8086,3b3c.1028.410.5' + 'pci8086,3b3c.1028.410' + 'pci1028,410' + 'pci8086,3b3c.5' + 'pci8086,3b3c' + 'pciclass,0c0320' + 'pciclass,0c03'
model: 'Universal Serial Bus EHCI compliant'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1a'
class-code: 000c0320
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b3c
name: 'pci1028,410'
Node 0x000008
acpi-namespace: '\_SB_.PCI0.HDEF'
assigned-addresses: 8300d810.00000000.f5460000.00000000.00004000
reg: 0000d800.00000000.00000000.00000000.00000000.0300d810.00000000.00000000.00000000.00004000
compatible: 'pciex8086,3b57.1028.410.5' + 'pciex8086,3b57.1028.410' + 'pciex8086,3b57.5' + 'pciex8086,3b57' + 'pciexclass,040300' + 'pciexclass,0403' + 'pci8086,3b57.1028.410.5' + 'pci8086,3b57.1028.410' + 'pci1028,410' + 'pci8086,3b57.5' + 'pci8086,3b57' + 'pciclass,040300' + 'pciclass,0403'
model: 'Mixed Mode device'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1b'
class-code: 00040300
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b57
name: 'pci1028,410'
Node 0x000009
acpi-namespace: '\_SB_.PCI0.RP01'
slot-names: 00000001.746f6c53.00003333
reg: 0000e000.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b42.5' + 'pciex8086,3b42' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b42.5' + 'pci8086,3b42' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00005000.81000000.00000000.00005000.00000000.00001000.82000000.00000000.f4000000.82000000.00000000.f4000000.00000000.01400000
bus-range: 00000001.00000001
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000000
devsel-speed: 00000000
interrupts: 00000001
unit-address: '1c'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b42
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b42'
Node 0x00000a
acpi-namespace: '\_SB_.PCI0.RP02'
slot-names: 00000001.746f6c53.00003433
reg: 0000e100.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b44.5' + 'pciex8086,3b44' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b44.5' + 'pci8086,3b44' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00004000.81000000.00000000.00004000.00000000.00001000.82000000.00000000.f2c00000.82000000.00000000.f2c00000.00000000.01400000
bus-range: 00000002.00000002
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000001
devsel-speed: 00000000
interrupts: 00000002
unit-address: '1c,1'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b44
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b44'
Node 0x000013
acpi-namespace: '\_SB_.PCI0.RP02.PXSX'
assigned-addresses: 83020010.00000000.f2c00000.00000000.00002000
reg: 00020000.00000000.00000000.00000000.00000000.03020010.00000000.00000000.00000000.00002000
compatible: 'pciex8086,422c.8086.1321.35' + 'pciex8086,422c.8086.1321' + 'pciex8086,422c.35' + 'pciex8086,422c' + 'pciexclass,028000' + 'pciexclass,0280' + 'pci8086,422c.8086.1321.35' + 'pci8086,422c.8086.1321' + 'pci8086,1321' + 'pci8086,422c.35' + 'pci8086,422c' + 'pciclass,028000' + 'pciclass,0280'
model: 'Network controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00008086
subsystem-id: 00001321
unit-address: '0'
class-code: 00028000
revision-id: 00000035
vendor-id: 00008086
device-id: 0000422c
name: 'pci8086,1321'
Node 0x00000b
acpi-namespace: '\_SB_.PCI0.RP03'
slot-names: 00000001.746f6c53.00000038
reg: 0000e200.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b46.5' + 'pciex8086,3b46' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b46.5' + 'pci8086,3b46' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00003000.81000000.00000000.00003000.00000000.00001000.82000000.00000000.f1800000.82000000.00000000.f1800000.00000000.01400000
bus-range: 00000003.00000003
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000002
devsel-speed: 00000000
interrupts: 00000003
unit-address: '1c,2'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b46
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b46'
Node 0x000014
acpi-namespace: '\_SB_.PCI0.RP03.PXSX'
assigned-addresses: 82030010.00000000.f1830000.00000000.00000100
reg: 00030000.00000000.00000000.00000000.00000000.02030010.00000000.00000000.00000000.00000100
compatible: 'pciex1180,e822.1028.410.1' + 'pciex1180,e822.1028.410' + 'pciex1180,e822.1' + 'pciex1180,e822' + 'pciexclass,080500' + 'pciexclass,0805' + 'pci1180,e822.1028.410.1' + 'pci1180,e822.1028.410' + 'pci1028,410' + 'pci1180,e822.1' + 'pci1180,e822' + 'pciclass,080500' + 'pciclass,0805'
model: 'SD Host controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '0'
class-code: 00080500
revision-id: 00000001
vendor-id: 00001180
device-id: 0000e822
name: 'pci1028,410'
Node 0x00000c
acpi-namespace: '\_SB_.PCI0.RP04'
slot-names: 00000001.746f6c53.00000039
reg: 0000e300.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b48.5' + 'pciex8086,3b48' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b48.5' + 'pci8086,3b48' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00002000.81000000.00000000.00002000.00000000.00001000.82000000.00000000.f0400000.82000000.00000000.f0400000.00000000.01400000
bus-range: 00000004.00000009
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000003
devsel-speed: 00000000
interrupts: 00000004
unit-address: '1c,3'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b48
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b48'
Node 0x00000d
acpi-namespace: '\_SB_.PCI0.EHCI'
assigned-addresses: 8200e810.00000000.f5450000.00000000.00000400
reg: 0000e800.00000000.00000000.00000000.00000000.0200e810.00000000.00000000.00000000.00000400
compatible: 'pci8086,3b34.1028.410.5' + 'pci8086,3b34.1028.410' + 'pci1028,410' + 'pci8086,3b34.5' + 'pci8086,3b34' + 'pciclass,0c0320' + 'pciclass,0c03'
model: 'Universal Serial Bus EHCI compliant'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1d'
class-code: 000c0320
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b34
name: 'pci1028,410'
Node 0x00000e
acpi-namespace: '\_SB_.PCI0.P0P1'
slot-names: 0000002f.746f6c53.6c530031.0032746f.746f6c53.6c530033.0034746f.746f6c53.00000032
reg: 0000f000.00000000.00000000.00000000.00000000
compatible: 'pci8086,2448.a5' + 'pci8086,2448' + 'pciclass,060401' + 'pciclass,0604'
model: 'Subtractive Decode PCI-PCI bridge'
bus-range: 0000000a.0000000a
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pci'
power-consumption: 00000001.00000001
devsel-speed: 00000000
unit-address: '1e'
class-code: 00060401
revision-id: 000000a5
vendor-id: 00008086
device-id: 00002448
name: 'pci8086,2448'
Node 0x00000f
#size-cells: 00000001
#address-cells: 00000002
ranges: 00000001.00000000.81000000.00000000.00000000.00000022.00000001.00000024.81000000.00000000.00000024.00000002.00000001.00000028.81000000.00000000.00000028.00000002.00000001.0000002c.81000000.00000000.0000002c.00000006.00000001.00000034.81000000.00000000.00000034.00000002.00000001.00000038.81000000.00000000.00000038.00000002.00000001.0000003c.81000000.00000000.0000003c.00000002.00000001.00000040.81000000.00000000.00000040.00000004.00000001.0000004e.81000000.00000000.0000004e.00000006.00000001.00000060.81000000.00000000.00000060.00000002.00000001.00000063.81000000.00000000.00000063.00000003.00000001.00000067.81000000.00000000.00000067.00000001.00000001.00000070.81000000.00000000.00000070.00000008.00000001.00000070.81000000.00000000.00000070.00000001.00000001.00000080.81000000.00000000.00000080.00000022.00000001.000000a4.81000000.00000000.000000a4.00000002.00000001.000000a8.81000000.00000000.000000a8.00000002.00000001.000000ac.81000000.00000000.000000ac.00000002.00000001.000000b0.81000000.00000000.000000b0.00000006.00000001.000000b8.81000000.00000000.000000b8.00000002.00000001.000000bc.81000000.00000000.000000bc.00000002.00000001.000000c0.81000000.00000000.000000c0.00000020.00000001.000000f0.81000000.00000000.000000f0.00000001.00000001.00000400.81000000.00000000.00000400.00000080.00000001.000004d0.81000000.00000000.000004d0.00000002.00000001.00000500.81000000.00000000.00000500.00000080.00000001.00000680.81000000.00000000.00000680.00000020.00000001.00000930.81000000.00000000.00000930.00000001.00000001.00000934.81000000.00000000.00000934.00000001.00000001.00000cf8.81000000.00000000.00000cf8.00000008.00000001.00001000.81000000.00000000.00001000.00000014.00000001.0000164e.81000000.00000000.0000164e.00000002.00000001.0000ffff.81000000.00000000.0000ffff.00000001.00000000.f54c0000.82000000.00000000.f54c0000.00001000.00000000.f8000000.82000000.00000000.f8000000.04000000.00000000.fed00000.82000000.00000000.fed00000.00000400.00000000.fed10000.82000000.00000000.fed10000.00004000.00000000.fed18000.82000000.00000000.fed18000.00002000.00000000.fed1c000.82000000.00000000.fed1c000.00024000.00000000.fed45000.82000000.00000000.fed45000.0004b000.00000000.fee00000.82000000.00000000.fee00000.00100000.00000000.ff000000.82000000.00000000.ff000000.01000000.00000000.ff000000.82000000.00000000.ff000000.01000000
acpi-namespace: '\_SB_.PCI0.LPCB'
device_type: 'isa'
reg: 0000f800.00000000.00000000.00000000.00000000
compatible: 'pci8086,3b0f.1028.410.5' + 'pci8086,3b0f.1028.410' + 'pci1028,410' + 'pci8086,3b0f.5' + 'pci8086,3b0f' + 'pciclass,060100' + 'pciclass,0601'
model: 'ISA bridge'
power-consumption: 00000001.00000001
devsel-speed: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f'
class-code: 00060100
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b0f
name: 'isa'
Node 0x00001c
unit-address: '1,60'
interrupts: 00000001.0000000c
reg: 00000001.00000060.00000001.00000001.00000064.00000001
name: 'i8042'
Node 0x00001d
compatible: 'pnpPNP,303'
device-type: 'keyboard'
interrupts: 00000001.0000000c
reg: 00000000
acpi-namespace: '\_SB_.PCI0.LPCB.PS2K'
model: 'System keyboard'
name: 'keyboard'
Node 0x00001e
compatible: 'pnpPNP,f03'
device-type: 'mouse'
reg: 00000001
interrupts: 0000000c
acpi-namespace: '\_SB_.PCI0.LPCB.PS2M'
model: 'PS/2 Port for PS/2-style Mice'
name: 'mouse'
Node 0x00001f
interrupts: 00000004
reg: 00000001.000003f8.00000008
model: 'Standard serial port'
compatible: 'PNP0500'
name: 'asy'
Node 0x000010
acpi-namespace: '\_SB_.PCI0.SAT0'
assigned-addresses: 8100fa10.00000000.00006090.00000000.00000008.8100fa14.00000000.00006080.00000000.00000004.8100fa18.00000000.00006070.00000000.00000008.8100fa1c.00000000.00006060.00000000.00000004.8100fa20.00000000.00006020.00000000.00000020.8200fa24.00000000.f5440000.00000000.00000800
reg: 0000fa00.00000000.00000000.00000000.00000000.0100fa10.00000000.00000000.00000000.00000008.0100fa14.00000000.00000000.00000000.00000004.0100fa18.00000000.00000000.00000000.00000008.0100fa1c.00000000.00000000.00000000.00000004.0100fa20.00000000.00000000.00000000.00000020.0200fa24.00000000.00000000.00000000.00000800
compatible: 'pci8086,3b2f.1028.410.5' + 'pci8086,3b2f.1028.410' + 'pci1028,410' + 'pci8086,3b2f.5' + 'pci8086,3b2f' + 'pciclass,010601' + 'pciclass,0106'
model: 'SATA AHCI 1.0 Interface'
power-consumption: 00000001.00000001
66mhz-capable:
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,2'
class-code: 00010601
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b2f
name: 'pci1028,410'
Node 0x000011
acpi-namespace: '\_SB_.PCI0.SBUS'
assigned-addresses: 8300fb10.00000000.f5430000.00000000.00000100.8100fb20.00000000.00006000.00000000.00000020
reg: 0000fb00.00000000.00000000.00000000.00000000.0300fb10.00000000.00000000.00000000.00000100.0100fb20.00000000.00000000.00000000.00000020
compatible: 'pci8086,3b30.1028.410.5' + 'pci8086,3b30.1028.410' + 'pci1028,410' + 'pci8086,3b30.5' + 'pci8086,3b30' + 'pciclass,0c0500' + 'pciclass,0c05'
model: 'SMBus (System Management Bus)'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,3'
class-code: 000c0500
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b30
name: 'pci1028,410'
Node 0x000012
assigned-addresses: 8300fe10.00000000.f5420000.00000000.00001000
reg: 0000fe00.00000000.00000000.00000000.00000000.0300fe10.00000000.00000000.00000000.00001000
compatible: 'pci8086,3b32.1028.410.5' + 'pci8086,3b32.1028.410' + 'pci1028,410' + 'pci8086,3b32.5' + 'pci8086,3b32' + 'pciclass,118000' + 'pciclass,1180'
model: 'DSP/DAP controllers'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,6'
class-code: 00118000
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b32
name: 'pci1028,410'
Node 0x000015
device_type: 'acpirootnex'
compatible: 'SOLA0001' + 'acpirootnex' + 'SOLA0002' + 'acpivirtnex'
acpi-namespace: '\'
name: 'fw'
Node 0x000016
unit-address: '1'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000000
acpi-processor-id: 00000001
acpi-namespace: '\_PR_.CPU0'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000017
unit-address: '2'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000004
acpi-processor-id: 00000002
acpi-namespace: '\_PR_.CPU1'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000018
unit-address: '3'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000001
acpi-processor-id: 00000003
acpi-namespace: '\_PR_.CPU2'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000019
unit-address: '4'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000005
acpi-processor-id: 00000004
acpi-namespace: '\_PR_.CPU3'
device_type: 'acpicpu'
name: 'cpu'
Node 0x00001a
unit-address: '0'
compatible: 'acpidevice' + 'SOLA0002' + 'acpivirtnex'
acpi-namespace: '\_SB_'
device_type: 'acpidevice'
name: 'sb'
Node 0x00001b
io-space: 00000000.00000020.00000020.00000002.00000024.00000002.00000028.00000002.0000002c.00000002.0000002e.00000002.00000030.00000002.00000034.00000002.00000038.00000002.0000003c.00000002.00000040.00000004.0000004e.00000002.00000050.00000004.00000060.00000001.00000061.00000001.00000063.00000001.00000064.00000001.00000065.00000001.00000067.00000001.00000070.00000008.00000070.00000001.00000080.00000001.00000081.00000011.00000092.00000001.00000093.0000000d.000000a0.00000002.000000a4.00000002.000000a8.00000002.000000ac.00000002.000000b0.00000002.000000b2.00000002.000000b4.00000002.000000b8.00000002.000000bc.00000002.000000c0.00000020.000000f0.00000001.00000400.00000080.000004d0.00000002.00000500.00000080.00000680.00000020.00000930.00000001.00000934.00000001.00000cf8.00000008.00001000.00000004.00001004.00000010.0000164e.00000002.0000ffff.00000001
device-memory: f54c0000.00001000.f8000000.04000000.fed00000.00000400.fed10000.00004000.fed18000.00001000.fed19000.00001000.fed1c000.00004000.fed20000.00020000.fed45000.0004b000.fee00000.00100000.ff000000.01000000.ff000000.01000000
dma-channels: 00000004
interrupts: 00000000.00000001.00000002.00000008.0000000c.0000000d
name: 'used-resources'
prtdiag:
System Configuration: Dell Inc. Latitude E4310
BIOS Configuration: Dell Inc. A05 11/20/2010
==== Processor Sockets ====================================
Version Location Tag
Intel(R) Core(TM) i5 CPU M 560 @ 2.67GH CPU 1
==== Memory Device Sockets ================================
Type Status Set Device Locator Bank Locator
Unknown in use 0 DIMM_A BANK 0
unknown empty 0 DIMM_B BANK 2
==== On-Board Devices =====================================
"Intel GM45 Graphics"
NETWORK_NAME_STRING
==== Upgradeable Slots ====================================
ID Status Type Description
0 available PCI Express x16 J5C1
1 available PCI Express J6C2
2 in use PCI Express J6D2
3 in use PCI Express J7C1
4 available PCI Express J7D2
System Information:
Manufacturer:Dell Inc.
Product:Latitude E4310
BIOS Information:
Vendor:Dell Inc.
Version:A05
Release Date:11/20/2010
BIOS Revision: BIOS Revision:4.6
Firmware Revision:
MotherBoard Information:
Product:0D8H24
Manufacturer:Dell Inc.
Version:A00
Onboard Devices:[Video,Disabled]"Intel GM45 Graphics"
CPU Information:
Processor 0:
Processor Socket Type:CPU 1
Processor Manufacturer:Intel
Current Voltage:0.0V
External Clock:533MHZ
Max Speed:4000MHZ
Current Speed:2666MHZ
Memory Information:
Physical Memory: 4G (4G)
Maximum Memory Support: 4096G
Memory Subsystem 0:
Array Used Function:System memory
Memory Error Correction Supported:None
Maximum Array Capacity:8G
Number of Memory Devices:2
Memory Device 0:
Memory Device Locator:DIMM_A
Total Width:64
Data Width:64
Installed Size:4096M
Memory Device Type:Unknown
Speed:1067MHZ
Memory Device 1:
[Not Installed] -
Openwindows dt libs problems in Solaris 2.8
Hello
My Motif Apps work fine with solaris 2.6
Now, we are moving to solaris 2.8.
I compiled the SAME source code in solaris 2.8 - this App have a different look and feel - like fonts being different, bgcolor, etc.
however, if i compile with solaris 2.6 /usr/dt/lib and /usr/openwin/lib - all looks similar
can anyone point the problems with solaris 2.8
/usr/dt/lib and /usr/openwin/lib
Thanks,
venkatAre you using the same dot files, from the same
login account in each case? This sounds like some
local settings are different. Using different
monitors can make a difference, too. There are two
different systems with the same monitor which you
are using from the same home dir? -
About init GUI on linux or solaris
About init GUI on linux or solaris
Error1.xhost: unable to open display ""
Possible Solution:
root@oardc:~# xhost +
xhost: unable to open display ""
root@oardc:~# export DISPLAY=localhost:1
root@oardc:~# xhost +
access control disabled, clients can connect from any host
Error2.No protocol specified
xhost: unable to open display ":1.0"
Possible Solution:
Forget about DISPLAY and xhost, that's ancient history!
Use SSH X-forwarding.
- On the solaris server make sure SSH server is running and X11
forwarding is enabled.
- On the Cygwin-PC, start the X11 environment ("startx" I think), open an xterm and
ssh -X username@solaris-hostname-or-ip
sometimes you need -Y instead of -X (don't remember why)
ssh -Y username@solaris-hostname-or-ip
That's all. X programs on Solaris should open on Cygwin.)Supposedly TogetherSoft Control Center does all this. However,
I can't confirm. Check it out at http://www.togethersoft.com.
Mike
Terje Ostvoll <[email protected]> wrote in message
news:[email protected]..
Any suggestions for integrated development environments to be used in
conjunction with WebLogic on Linux or Solaris? We consider using using
Weblogic app server, but don't really know if there are any preferred
IDEs on unix. Would like support for UML, deploy to WebLogic, JSP, java
debugger, etc...
Terje -
[Solved] Can't upgrade system - cups related problem
Hi,
I can't upgrade (pacman -Syu) my system due some cups related problems.
AS you can see, although the problem seems to be cups related, none of the other packages has been upgarded as well.
Please advise.:mad:
Thanks,
Michael Badt
Here's a copy of my terminal (all packages get downloaded):
Targets (10): dbus-core-1.2.24-1 bluez-4.63-1 libcups-1.4.2-5 cups-1.4.2-5 dbus-1.2.24-1 gsfonts-1.0.7pre44-2 openssl-0.9.8n-1 net-snmp-5.5-2
pcre-8.02-1 xine-lib-1.1.18.1-1
Total Download Size: 0.00 MB
Total Installed Size: 52.32 MB
Proceed with installation? [Y/n] y
checking package integrity...
(10/10) checking for file conflicts [############################################################################################] 100%
error: failed to commit transaction (conflicting files)
cups: /etc/cups/printers.conf exists in filesystem
cups: /etc/cups/subscriptions.conf exists in filesystem
Errors occurred, no packages were upgraded.
Last edited by mibadt (2010-03-27 02:39:30)Well it sort of did, but I have to admit I had to check the forums before continuing...the messages I received were:
error: failed to commit transaction (conflicting files)
cups: /etc/cups/classes.conf exists in filesystem
cups: /etc/cups/printers.conf exists in filesystem
cups: /etc/cups/subscriptions.conf exists in filesystem -
A troublesome algorithm-related problem
Hello all:
Sorry for cross-posting...but can I draw your kind attention to http://forum.java.sun.com/thread.jspa?threadID=633438&tstart=0 on which an algorithm-related problem is stated. If you wish to give a hand, please do it there to avoid scattering all useful thoughts.
ThanksHello all:
Sorry for cross-posting...but can I draw your kind attention to http://forum.java.sun.com/thread.jspa?threadID=633438&tstart=0 on which an algorithm-related problem is stated. If you wish to give a hand, please do it there to avoid scattering all useful thoughts.
Thanks -
my husbands iphone4 was dropped and it doesnt work now... according to powermac representative, hardware related problem, what should i do? anybody knows where to bring the unit for repair, because powermac didnt accept it.
Who is powermac? Are they and authorized iPhone sales site?
-
Hi
can any one help me on this
I am facing dns problem in solaris sparc 9.0. I am not able to see
" /etc/named.conf" .If i type in.named -v it is showing BIND version .is it required to install bind seprately.
I downloaded BIND from sunfreeware i tried to compile but it is throghing the error something like "make cannot build" after running "./confiugre"
One more query is it possible to install dns and nis server in same solaris box .
could any one guide me how to setup the DNS server and how to configure
Thanks
SolarisTeamHi
Thanks for the reply,
It is working fine with the upgraded version of Weblogic 9.0 from weblogic 8.1. But not with the fresh installation of Weblogic 9.0.
Thanks,
Raj -
SAP 4.7 Installation problem on Solaris 10 - Oracle 9.2.0.7
Hi,
I am trying to install SAP 4.7 on Solaris 10 - Oracle 9.2.0.7. I am using standar installation DVD for SAP 4.7 SR1. After installation I want to login SAP system I have an error about database inconsistency. System said that enter SICK transaction. I entered SICK and my error is "OS release SunOS 5.10 Generic_141444-09 sun4u is not support with this kernel". After I received this error I installed new kernel (221) and I upgaded kernel to 221. But after that I could not open SAP system. I checked dev_w1 and it is like below:
"dev_w1" 456 lines, 18662 characters
trc file: "dev_w1", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid KZP
M systemid 370 (Solaris on SPARCV9 CPU)
M relno 6400
M patchlevel 0
M patchno 221
M intno 20020600
M make: single threaded, Unicode, 64 bit
M pid 22022
M
M
M Fri Jan 29 15:11:00 2010
M ***LOG Q01=> tskh_init, WPStart (Workproc 1 1 22022) [thxxhead.c 1144]
M calling db_connect ...
C Got ORACLE_HOME=/oracle/KZP/920_64 from environment
C got NLS_LANG='AMERICAN_AMERICA.UTF8' from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPKZP's password
C Connecting as /@KZP on connection 0 (nls_hdl 0) ... (dbsl 640 070208)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x10667d250 0x10668fcd0 0x10668f668
C Attaching to DB Server KZP (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8)
C Starting user session (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8,usrhp=0x10669a800)
C Now '/@KZP' is connected: con_hdl=0, nls_hdl=0, session_id=13.
C Got SAPKZP's password from OPS$-user
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=0x10668f598,usrhp=0x10669a800)
C Now I'm disconnected from ORACLE
C Connecting as SAPKZP/<pwd>@KZP on connection 0 (nls_hdl 0) ... (dbsl 640 070208)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x10667d250 0x10668fcd0 0x10668f668
C Starting user session (con_hdl=0,svchp=0x10668f598,srvhp=0x106691dc8,usrhp=0x10669a800)
C Now 'SAPKZP/<pwd>@KZP' is connected: con_hdl=0, nls_hdl=0, session_id=13.
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance KZP is running on sapkzpn2 with ORACLE version 9.2.0.7.0 since JAN 29, 2010, 15:10:46
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100129 151100 sapkzpn2
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip
,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Fri Jan 29 15:11:07 2010
I MtxInit: 1 0 0
M SHM_PRES_BUF (addr: 0xffffffff7597a000, size: 4400000)
M SHM_ROLL_AREA (addr: 0xfffffffe56000000, size: 134217728)
M SHM_PAGING_AREA (addr: 0xffffffff62000000, size: 67108864)
M SHM_ROLL_ADM (addr: 0xffffffff75db0000, size: 2672386)
M SHM_PAGING_ADM (addr: 0xffffffff71f00000, size: 656416)
M ThCreateNoBuffer allocated 572152 bytes for 1000 entries at 0xfffffffe4e004000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0xffffffff7bc00000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 1 initializing ....
X Using implementation std
X ES initialized.
B db_con_shm_ini: WP_ID = 1, WP_CNT = 8, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0xffffffff60000100, size: 30000000, end: 0xffffffff61c9c480)
B dbtbxbuf: Buffer TABLP (addr: 0xffffffff6d400100, size: 10240000, end: 0xffffffff6ddc4100)
B dbexpbuf: Buffer EIBUF (addr: 0xfffffffe5f800108, size: 4194304, end: 0xfffffffe5fc00108)
B dbexpbuf: Buffer ESM (addr: 0xfffffffe5f000108, size: 4194304, end: 0xfffffffe5f400108)
B dbexpbuf: Buffer CUA (addr: 0xfffffffe5101e108, size: 3072000, end: 0xfffffffe5130c108)
B dbexpbuf: Buffer OTR (addr: 0xfffffffe5e800108, size: 4194304, end: 0xfffffffe5ec00108)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Fri Jan 29 15:11:08 2010
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x106aa11e0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0xfffffffe51310070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0xfffffffe513103c8
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Fri Jan 29 15:11:09 2010
A
A -PXA--
A PXA INITIALIZATION
A System page size: 8kb, total admin_size: 5512kb, dir_size: 5480kb.
I *** ERROR => shmget(10006,153600000,2016) (22: Invalid argument) [shmux.c 1525]
A RABAX in run level 1
A RABAX in unkown environment: task_type=0, run level=1, rabax state=80000000 ztta_task_type=0
[0] DoStack2 ( 0x105af7010, 0xffffffff7fffd740, 0x1004a4ae4, 0x0, 0x105dbb180, 0x102e2f6e0 ), at 0x1004a4ae4
[1] CTrcStack2 ( 0x1036f6d60, 0x0, 0x17400, 0x102e947dc, 0x0, 0x102e2f6e0 ), at 0x1004a4680
[2] __1cXrabax_CStackToTraceFile6F_v_ ( 0x0, 0x1, 0x0, 0x3097000, 0x100000000, 0x103097058 ), at 0x100ae0e80
[3] __1cKrabax_init6FpkH_v_ ( 0x102002ad8, 0x0, 0x1, 0x0, 0x0, 0x0 ), at 0x100ad97d8
[4] ab_rabax ( 0x0, 0x80000000, 0x6da, 0x103879400, 0x1880, 0x1065e4110 ), at 0x100acfe3c
[5] __1cJab_pbinit6F_v_ ( 0x100000000, 0x102e947dc, 0x1, 0x102002ab4, 0x102f4e1c0, 0x103815550 ), at 0x100750de0
[6] ab_init ( 0x0, 0x5bd5000, 0xac8800, 0x5bd5000, 0x1, 0x0 ), at 0x100ac8d34
[7] ThrInitRunTime ( 0x100489c00, 0x489c00, 0x332c400, 0x102e94820, 0x1, 0x102e947d4 ), at 0x100476e84
[8] ThStartUp2 ( 0x101fec800, 0x194c800, 0x100000000, 0x102e947d4, 0x0, 0x10194cc00 ), at 0x100415860
[9] tskh_init ( 0x2e7a000, 0x1, 0x1, 0x540, 0x102e94400, 0x15 ), at 0x100260f14
[10] tskhstart ( 0x0, 0x2e94400, 0x0, 0x1003d6400, 0x3d6400, 0x100000000 ), at 0x10025cf9c
[11] DpMain ( 0x3641400, 0x2e7a000, 0x100000000, 0x1, 0x0, 0x0 ), at 0x1001856c0
A
A Fri Jan 29 15:11:10 2010
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX failed.
A *** suicide ON
A ** RABAX: level LEV_RX_VMIT_CLEANUP entered.
A ** RABAX: level LEV_RX_VMIT_CLEANUP completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD failed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
X *** ERROR => invalid MM administration (adm) (nil) (admCheck)(nil) [mmxx.c 2127]
A ** RABAX: level LEV_RX_WRITE_SNAP failed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Fri Jan 29 15:11:10 2010
A
A Error Code PXA_NO_SHARED_MEMORY.
A Module $Id: //bas/640_REL/src/krn/runt/abload3.c#44 $ SAP.
A Function ab_pbinit Line 1754.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS failed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end RX_SUICIDE
A Shared Memory von 150000 Kilo-Bytes f\303\274r PXA nicht verf\303\274gbar..
A
A *
A * Non recoverable error. Aborting process...
A *
M ***LOG R63=> ThWpHalt, halt wp () [thxxhead.c 15213]
M in_ThErrHandle: 1
M *** ERROR => ThWpHalt: halt wp (step 1, th_errno 5, action 2, level 1) [thxxhead.c 9696]
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = 1
M mode = 0
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M
M PfStatDisconnect: disconnect statistics
M ThIErrHandle: action changed to 2
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M ThErrPrivHandle: set th_errno (5)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (5), detach T1/M0 [thxxhead.c 10129]
M
M Modeinfo for User T1/M0
M
M
M call ThrShutDown (1)...
A Saving PXA statistics.
M -
C-STACK -
[0] __1cNab_pxasavedir6F_i_ ( 0x102e94400, 0x2f63c00, 0x102e94800, 0x10200b800, 0x1, 0x0 ), at 0x10076c108
[1] ab_shutdown ( 0x0, 0x1, 0x102f3b400, 0x1, 0x102e94400, 0x2e94400 ), at 0x100aca150
[2] ThIErrHandle ( 0x10251b400, 0x2e94800, 0x102e7a324, 0x2, 0x2e94400, 0x102e94800 ), at 0x100293870
M -
M ***LOG Q0E=> SigIGenAction, signal ( 11) [sigux.c 902]
M in_ThErrHandle: 2
M ***LOG R0H=> ThIErrHandle, Loop in ThErrHandle, restart wp () [thxxhead.c 9717]
M -
C-STACK -
[0] DoStack2 ( 0x105af7010, 0xffffffff7fffc340, 0x1004a4ae4, 0x0, 0x105dbac40, 0x102e2f6e0 ), at 0x1004a4ae4
[1] CTrcStack2 ( 0x1036f6d00, 0x0, 0x17400, 0x102e947dc, 0x10049d16c, 0x102e2f6e0 ), at 0x1004a4680
[2] ThIErrHandle ( 0x0, 0x100000000, 0x3, 0x10331ff08, 0xb, 0x4 ), at 0x100291b08
[3] SigIGenAction ( 0x102c9f800, 0x1032acd04, 0x102c9f800, 0xb, 0x102e94820, 0x102e947d4 ), at 0x101e49c4c
[4] __sighndlr ( 0xb, 0xffffffff7fffcf80, 0xffffffff7fffcca0, 0x101e493bc, 0x0, 0x0 ), at 0xffffffff7c7d62e0
[5] call_user_handler ( 0xffffffff7d300200, 0xffffffff7d300200, 0xffffffff7fffcca0, 0x19, 0x0, 0x0 ), at 0xffffffff7c7c9e44
[6] sigacthandler ( 0x0, 0xffffffff7fffcf80, 0xffffffff7fffcca0, 0xffffffff7d300200, 0x0, 0xffffffff7c93c000 ), at 0xffffffff7c7ca03
c
[7] __1cNab_pxasavedir6F_i_ ( 0x102e94400, 0x2f63c00, 0x102e94800, 0x10200b800, 0x1, 0x0 ), at 0x10076c0f4
[8] ab_shutdown ( 0x0, 0x1, 0x102f3b400, 0x1, 0x102e94400, 0x2e94400 ), at 0x100aca150
[9] ThIErrHandle ( 0x10251b400, 0x2e94800, 0x102e7a324, 0x2, 0x2e94400, 0x102e94800 ), at 0x100293870
[10] __1cIrabax_do6FpkHpHi_v_ ( 0x102002ad8, 0x0, 0x41, 0x102e94800, 0x1, 0x1 ), at 0x100adc154
[11] ab_rabax ( 0x2, 0x2e94800, 0x1, 0x100000000, 0x2e94400, 0x2e94400 ), at 0x100ad3bc4
M -
M Fri Jan 29 15:11:11 2010
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 1
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = 1
M mode = 0
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 22022) [dpuxtool.c 318]
Also I tried to change SAPEXE.SAR and SAPEXEDB.SAR files from SAP Kernel CD. After that I started installation again. But I have same error. SAP system didn't work.
How can I solve this error?Cannot I install SAP 4.7 SR1 on Solaris 10 - ORacle 9.2.0.7?Is the problem about SAP profile parameters or Solaris Kernel parameters
Best regards,Also dev_disp is like below:
sid KZP
systemid 370 (Solaris on SPARCV9 CPU)
relno 6400
patchlevel 0
patchno 221
intno 20020600
make: single threaded, Unicode, 64 bit
pid 22016
***LOG Q00=> DpSapEnvInit, DPStart (00 22016) [dpxxdisp.c 1104]
shared lib "dw_xml.so" version 221 successfully loaded
shared lib "dw_xtc.so" version 221 successfully loaded
shared lib "dw_stl.so" version 221 successfully loaded
shared lib "dw_gui.so" version 221 successfully loaded
shared lib "dw_mdm.so" version 221 successfully loaded
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >sapkzpn2_KZP_00 <
DpShMCreate: sizeof(wp_adm) 10752 (1344)
DpShMCreate: sizeof(tm_adm) 3728952 (18552)
DpShMCreate: sizeof(wp_ca_adm) 31200 (104)
DpShMCreate: sizeof(appc_ca_adm) 10400 (104)
DpShMCreate: sizeof(comm_adm) 316000 (632)
DpShMCreate: sizeof(vmc_adm) 0 (560)
DpShMCreate: sizeof(wall_adm) (40056/36728/88/192)
DpShMCreate: SHM_DP_ADM_KEY (addr: 0xffffffff70c00000, size: 4181592)
DpShMCreate: allocated sys_adm at 0xffffffff70c00000
DpShMCreate: allocated wp_adm at 0xffffffff70c01c88
DpShMCreate: allocated tm_adm_list at 0xffffffff70c04688
DpShMCreate: allocated tm_adm at 0xffffffff70c046b0
DpShMCreate: allocated wp_ca_adm at 0xffffffff70f92ce8
DpShMCreate: allocated appc_ca_adm at 0xffffffff70f9a6c8
DpShMCreate: allocated comm_adm_list at 0xffffffff70f9cf68
DpShMCreate: allocated comm_adm at 0xffffffff70f9cf80
DpShMCreate: allocated vmc_adm_list at 0xffffffff70fea1e0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0xffffffff70fea208
DpShMCreate: allocated wall_adm at 0xffffffff70fea210
MBUF state OFF
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsIUnamFileMapInit: ES base = 0x0xfffffffe60000000
EsStdInit: Extended Memory 4092 MB allocated
<ES> 1022 blocks reserved for free list.
ES initialized.
Fri Jan 29 15:11:07 2010
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1490]
***LOG Q0K=> DpMsAttach, mscon ( sapkzpn2) [dpxxdisp.c 10127]
DpStartStopMsg: send start message (myname is >sapkzpn2_KZP_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Jan 29 15:11:08 2010
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 221
Release check o.K.
Fri Jan 29 15:11:29 2010
ERROR => W0 (pid 22021) died [dpxxdisp.c 12698]
ERROR => W2 (pid 22023) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xbf --> 0xbd
ERROR => W3 (pid 22024) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xbd --> 0xb9
ERROR => W4 (pid 22025) died [dpxxdisp.c 12698]
ERROR => W5 (pid 22028) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xb9 --> 0xb1
ERROR => W6 (pid 22030) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xb1 --> 0xa1
ERROR => W7 (pid 22038) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0xa1 --> 0x81
Fri Jan 29 15:12:08 2010
ERROR => W1 (pid 22022) died [dpxxdisp.c 12698]
my types changed after wp death/restart 0x81 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-22021 (SIGUSR2)
ERROR => DpWpKill(22021, SIGUSR2) failed [dpxxtool.c 2508]
killing W1-22022 (SIGUSR2)
ERROR => DpWpKill(22022, SIGUSR2) failed [dpxxtool.c 2508]
killing W2-22023 (SIGUSR2)
ERROR => DpWpKill(22023, SIGUSR2) failed [dpxxtool.c 2508]
killing W3-22024 (SIGUSR2)
killing W7-22038 (SIGUSR2)
ERROR => DpWpKill(22038, SIGUSR2) failed [dpxxtool.c 2508]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:18 2010
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Fri Jan 29 09:12:18 2010
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 22021 Ended no 1 0 78 SAPSYS
1 DIA 22022 Ended no 1 0 78 SAPSYS
2 UPD 22023 Ended no 1 0 78 SAPSYS
3 ENQ 22024 Ended no 1 0 78 SAPSYS
4 BTC 22025 Ended no 1 0 78 SAPSYS
5 BTC 22028 Ended no 1 0 78 SAPSYS
6 SPO 22030 Ended no 1 0 71 SAPSYS
7 UP2 22038 Ended no 1 0 71 SAPSYS
Dispatcher Queue Statistics Fri Jan 29 09:12:18 2010
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 6 ( 66%), shm 3 ( 33%)
since last update total 9, udp 6 ( 66%), shm 3 ( 33%)
Dump of tm_adm structure: Fri Jan 29 09:12:18 2010
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Jan 29 09:12:18 2010
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:23 2010
NiISelect: TIMEOUT occured (5000 ms)
DpHalt: shutdown server >sapkzpn2_KZP_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmKeySharedMMU( 57 ) = 0 (octal)
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmKeySharedMMU( 57 ) = 0 (octal)
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing proc (22019) (SOFT_KILL)
Stop icman
killing proc (22020) (SOFT_KILL)
Terminate gui connections
kill(22019,0) successful -> process alive
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=15
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Jan 29 15:12:24 2010
NiISelect: TIMEOUT occured (1000 ms)
kill(22019,0) -> ESRCH: process died
kill(22020,0) -> ESRCH: process died
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
DpStartStopMsg: send stop message (myname is >sapkzpn2_KZP_00 <)
NiIMyHostName: hostname = 'sapkzpn2'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
NiIRead: read 229, 1 packs, MESG_IO, hdl 3, data complete
NiBufIn: NIBUF len=229
NiBufIn: Packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 229 bytes
MSG received, len 110+119, flag 1, from MSG_SERVER, typ 0, key -
DpHalt: received 119 bytes from message server
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
cleanup event management
cleanup shared memory/semaphores
ShmCleanup SHM_SYS_ADM_KEY
ShmCleanup( 1 )
ShmCreate( 1, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 1, 3 )
ShmKeySharedMMU( 1 ) = 0 (octal)
ShmCreate( 1, 0, 2, -> 0x0xffffffff7b100000 )
ShmCleanup SHM_DP_ADM_KEY
ShmCleanup( 2 )
ShmCreate( 2, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 2, 3 )
ShmKeySharedMMU( 2 ) = 0 (octal)
ShmCreate( 2, 0, 2, -> 0x0xffffffff70c00000 )
ShmCleanup SHM_DP_CA_KEY
ShmCleanup( 3 )
ShmCreate( 3, 0, 2, 0x0xffffffff7fffeab8 )
ShmProtect( 3, 3 )
ShmKeySharedMMU( 3 ) = 0 (octal)
ShmCreate( 3, 0, 2, -> 0x0xffffffff6fc00000 )
ShmCleanup SHM_PF_KEY
ShmCleanup( 4 )
ShmCreate( 4, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 4 ) = 0740 (octal)
ShmKeySharedMMU( 4 ) = 0 (octal)
ShmProtect( 4, 3 )
ShmKeySharedMMU( 4 ) = 0 (octal)
ShmCreate( 4, 0, 2, -> 0x0xffffffff71f00000 )
ShmCleanup SHM_PRES_BUF
ShmCleanup( 14 )
ShmCreate( 14, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 10, 14, 0, 2, 0x0xffffffff7fffe970 )
ShmGet( 10, 14, 0, 2, -> 0x0xffffffff7597a000 )
ShmProtect( 14, 3 )
ShmProtect: Key=14 not attached
ShmProtect( 14, 3 )
ShmCreate( 14, 0, 2, -> 0x0xffffffff7597a000 )
ShmCleanup SHM_CALI_BUFFER
ShmCleanup( 11 )
ShmCreate( 11, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 10, 11, 0, 2, 0x0xffffffff7fffe970 )
ShmGet( 10, 11, 0, 2, -> 0x0xffffffff76040000 )
ShmProtect( 11, 3 )
ShmProtect: Key=11 not attached
ShmProtect( 11, 3 )
ShmCreate( 11, 0, 2, -> 0x0xffffffff76040000 )
ShmCleanup SHM_DB_TBUFF
ShmCleanup( 19 )
ShmCreate( 19, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 19 ) = 0740 (octal)
ShmKeySharedMMU( 19 ) = 0 (octal)
ShmProtect( 19, 3 )
ShmKeySharedMMU( 19 ) = 0 (octal)
ShmCreate( 19, 0, 2, -> 0x0xffffffff66000000 )
ShmCleanup SHM_DB_TBUFF_P
ShmCleanup( 33 )
ShmCreate( 33, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 33 ) = 0740 (octal)
ShmKeySharedMMU( 33 ) = 0 (octal)
ShmProtect( 33, 3 )
ShmKeySharedMMU( 33 ) = 0 (octal)
ShmCreate( 33, 0, 2, -> 0x0xffffffff70400000 )
ShmCleanup SHM_DB_STBUFF
ShmCleanup( 41 )
ShmCreate( 41, 0, 2, 0x0xffffffff7fffeab8 )
ShmKeyPermission( 41 ) = 0740 (octal)
ShmKeySharedMMU( 41 ) = 0 (octal)
ShmProtect( 41, 3 )
ShmKeySharedMMU( 41 ) = 0 (octal)
ShmCreate( 41, 0, 2, -> 0x0xffffffff66800000 )
ShmCleanup SHM_DB_TTBUFF
ShmCleanup( 42 )
ShmCreate( 42, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 42, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmKeySharedMMU( 40 ) = 0 (octal)
ShmProtect( 40, 3 )
ShmCreate( 40, 0, 2, -> 0x0xffffffff60000000 )
ShmGet( 40, 42, 0, 2, -> 0x0xffffffff62972000 )
ShmProtect( 42, 3 )
ShmProtect: Key=42 not attached
ShmProtect( 42, 3 )
ShmCreate( 42, 0, 2, -> 0x0xffffffff62972000 )
ShmDelete( 40 )
ShmCleanup SHM_DB_FTBUFF
ShmCleanup( 43 )
ShmCreate( 43, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 43, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_SNTBUFF
ShmCleanup( 45 )
ShmCreate( 45, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 45, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_IRBUFF
ShmCleanup( 44 )
ShmCreate( 44, 0, 2, 0x0xffffffff7fffeab8 )
ShmGet( 40, 44, 0, 2, 0x0xffffffff7fffe970 )
ShmCreate( 40, 0, 2, 0x0xffffffff7fffe798 )
ShmKeyPermission( 40 ) = 0740 (octal)
ShmCleanup SHM_DB_OBJ_BUFFER
ShmKeySharedMMU( 31 ) = 0 (octal)
ShmCreate( 31, 0, 2, -> 0x0xffffffff6f400000 )
closing connect handles (dgm + tcp)
DpDelSocketInfo: del info for socket 1 (type=2)
NiICloseHandle: shutdown and close hdl 1 / socket 8
DpDelSocketInfo: del info for socket 2 (type=1)
NiBufClose: clear extensions for hdl 2
NiBufSetStat: bufstat of hdl 2 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 2 / socket 9
***LOG Q05=> DpHalt, DPStop ( 22016) [dpxxdisp.c 9033]
shutdown completed - server stopped ***
Good Bye .....
Could you please help me about this issue?
Best regards -
Enhanced Storage Problem in Solaris Management Console Started in XManager
I have Sun Fire 480 with solaris 5.9 installed on it. I use XManager 1.3.9 on windows 2000 workstation to connect to it and launch Solaris Management Console (smc). After starting smc I point to Management Tools -> This Computer (sf480dbs) -> Storage -> Enhanced Storage. At that moment Log In dialog appears and I give root user name and password. After a few seconds SMC disappears (exits). If I look at CDE Error log there is the following exception
Thu Jul 31 21:00:36 2003 (/usr/dt/bin/dtexec) /usr/sbin/smc
Exception while creating engine named com.sun.java.help.search.DefaultSearchEngine for view: javax.help.SearchView@4db52b
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at javax.help.search.MergingSearchEngine.makeEngine(MergingSearchEngine.java:148)
at javax.help.search.MergingSearchEngine.merge(MergingSearchEngine.java:82)
at javax.help.JHelpSearchNavigator.merge(JHelpSearchNavigator.java:160)
at javax.help.JHelp.addHelpSet(JHelp.java:322)
at javax.help.JHelp.helpSetAdded(JHelp.java:288)
at javax.help.HelpSet.fireHelpSetAdded(HelpSet.java:344)
at javax.help.HelpSet.add(HelpSet.java:256)
at com.sun.management.viper.console.gui.help.VHelpViewer.consoleAction(VHelpViewer.java:138)
at com.sun.management.viper.console.VConsole.notifyListeners(VConsole.java:566)
at com.sun.management.viper.console.VConsole.consoleAction(VConsole.java:512)
at com.sun.management.viper.console.gui.VGUIConsole.consoleAction(VGUIConsole.java:566)
at com.sun.management.viperimpl.console.gui.SMCConsole.consoleAction(SMCConsole.java:292)
at com.sun.management.viperimpl.console.BaseConsoleManager.notifyListeners(BaseConsoleManager.java:370)
at com.sun.management.viperimpl.console.gui.GUIConsoleManager.loadOnlineHelpForTool(GUIConsoleManager.java:1198)
at com.sun.management.viperimpl.console.BaseConsoleManager.loadToolAndReplaceStub(BaseConsoleManager.java:2139)
at com.sun.management.viperimpl.console.BaseConsoleManager$ClickLoader.run(BaseConsoleManager.java:2060)
at com.sun.management.viper.util.ThreadPool$ThreadWorker.run(ThreadPool.java:138)
Caused by: java.security.InvalidParameterException
at com.sun.java.help.search.DefaultSearchEngine.<init>(DefaultSearchEngine.java:75)
... 21 more
Can anyone tell me anything what is problem?
I am newby to solaris and any ideas will be appreaciated.
Thanks in advance
David SuladzeTry search the WEB for your display adapter drivers. However, most of new especially intergated graphics are still not supported.
You may try to get it working with xsun, run kdmconfig and specify as display adapter VGA or Super VGA. I know that in some cases it helps.
As well do the same with Xorg and run /usr/X11/bin/xorgcfg, try to find somekind of generic VGA in drivers that are listed there.
As I know, smc runs only in graphical mode.
I saved the settings and pressed F2 for testing. I could see the displayDid you see buttons on that display (something like "yes", "no")?
xsun is very hard to set with most of display adapters and monitors, sometimes it shows only part of the screen, so you might not to see these buttons. However if you see them, press "yes" (or something like that, I dont exactly remember). Then reboot and your computer should start the GUI.
Maybe you are looking for
-
Error while creating database table
Hi I am creating a table with 2 key fields of length 255 chars each. its giving me error Key field is greater than 780. Please suggest. Regards Aditya
-
Hi something weird happened with my updates.
Ok I was using the iOS AppStore I was checking for updates and a update for minecraft pocket edition came up the thing is it was already installed even when I clicked the update it said installed. Then I clicked update all then in begain installing
-
HT1595 Can more than one computer be connected to the Apple TV at the same time?
Can more than one computer, etc. be connected to the Apple TV at the same time?
-
Error in Configure JMSAdmin utililty
Hi, I have installed IBM MQ Series 5.3 on windows XP. I am attempting to use JMSAdmin to configure my qcf and queues that my applications will talk to. When I run JMSAdmin and try to create my qcf I get unable to bind object. InitCtx> define QCF(samp
-
HT201263 how to go back i normal mode when i''m i recovery
how to go back i normal mode when i''m i recovery