Gui status - upload / download

Hello All,
Is there any way where I can download GUI status from one system and upload it to another system ?
Thanks in advance,
Senthil G

Hi Senthil,
Gui status is tied directly to programs, so that said, you want have to tie this gui status to a program, then transport the program. So if you have a gui status that you want to use that is tied to standard program, create a "Z" program, then you can copy the gui status from the standard program to the "Z" program. Now you can transport the "Z" program to this other system, then you can copy the gui status from the "Z" program to where ever you need it in the other system. Make sense. I'm assuming that this other system is outside of the DEV->TST->PRD heiracrchy.
You can copy the gui status using SE41. Click User Interface, Copy, Status.
Regards,
Nitin.

Similar Messages

GUI status upload and download....

Hi experts,
I am working upgradation project have problem with GUI status. How to upgrade GUI status from 4.6c to 6.0 ECC, Is there any upload and down load options.
Thanks & Regards.
Kk

Hi,
check this doc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c08e5899-1444-2a10-e489-ef6ffbf13146
Regards,
Anirban

Can a GUI Status be downloaded to disk?

Hello,
I need to copy a Gui Status from one system to another. (there is no transport route)
Does anyone know if there is some method to download it to disk and upload to a different machine?
Thx.
Andy

Check these fm
RS_CUA_INTERNAL_FETCH -> download
RS_CUA_INTERNAL_WRITE -> upload
a®

Upload / download gui-status/dynpro when function group

Hi All,
I'm coding a program where I can download and upload reports and module pools but I tried to do the same with function groups and I found It is different to upload dynpro and gui staus when the objet to generate is a function group.
Could anyone help me a little in order to complete and finish this issue?
Below is shown the routines I coding in order to achive that:
For gui-status uploading I use:
CALL FUNCTION 'RS_CUA_INTERNAL_WRITE'
    EXPORTING
      program   = prog
      language = sy-langu
      tr_key    = tr_key
      adm       = adm4
    TABLES
      sta       = sta4
      fun       = fun4
      men       = men4
      mtx       = mtx4
      act       = act4
      but       = but4
      pfk       = pfk4
      set       = set4
      doc       = doc4
      tit       = tit4
      biv       = biv46c
    EXCEPTIONS
      not_found = 1
      OTHERS    = 2.
For screen uploading I use:
GENERATE DYNPRO gs_d020s gt_d021s gt_d022s gt_d023s ID dynp_id
                      MESSAGE mess LINE line   WORD    word.
    IF sy-subrc = 0.
      EXPORT DYNPRO gs_d020s gt_d021s gt_d022s gt_d023s ID dynp_id.
    ENDIF.
But both options don't work when uploading function groups
Regards...
Edited by: Rob Burbank on Jun 1, 2011 11:58 AM
Edited by: Kenneth Castañeda on Jun 2, 2011 7:31 PM
Edited by: Kenneth Castañeda on Jun 2, 2011 7:34 PM

Hi Kenneth,
sorry, it is really not obvious that [there is a link behind zsaplink|http://code.google.com/p/saplink/].
From the link:
"SAPlink is an open source project that aims to make it easier to share ABAP developments between programmers. It provides the ability to easily distribute and package custom objects."
This software allows you to up- and download all kinds of SAP objects. It is distributed under the GNU General Public License.
I think this is exactly what you are looking for - or I did not understand your question.
Regards,
Clemens

How to download GUI status and then upload to another system?

Hi,
I have a requirement to copy a module pool program to another system (different system, it cannot be transported to that system)
We have options to download/upload programs/screens in SE38 and SE51. But, I couldn't see any such option in SE41.
Is there any other way to download GUI status from SE41 and then use that file to upload in other system?
Thanks in advance.
Regards,
Arun Mohan

Hello Arun,
If the object's transport order has been released, you can ask your basis person to download and import that request files(Co file + Data file) from the current system to the new system.
This is the easiest possible way to achieve your requirement.
Regards,
Karthik D

Upload/Download GUI STATUS

Hi SAP Experts,
Is there any way to download GUI STATUS from Z program to local PC and after that upload that GUI STATUS from the local PC to another 'Z' program.Both the Z programs are in different versions.
Please help.
Mukesh Kumar

Hi Mukesh,
Check these threads...
How to GUI status from one system to another
download Programs
cheers,
Prashanth
P.S Please mark helpful answers

Urgent : program to copy or download GUI status

Hi Experts,
I have to copy Screens and GUI status, GUI titles from one SAP sysytem to another SAP system. Do anyone have the solution for it.
Or any program that could download to local system and then to upload the GUI Status and Screens to another syatem....
Thanks,
Govind

Hi Govind,
You can download the entire code one by one in simple flat file and can upload the same in the target system. It will reduce a lot of effort on your part. But as for the screens I think you need to put the data elements again. But you can check it as I have never tried.
The process to upload and Download the entire code is given below:
To download
SE80->Utilities->More Utilities->Upload/Download->Download. ( use this to download in a simple flat file.)
To Upload
SE80->Utilities->More Utilities->Upload/Download->Upload. ( now upload the simple file in the target system in the same way.)
Thanks and Regards,
Samantak.
Rewards points for useful answers.

Download GUI Status

Hi All,
Any idea? how to download/upload GUI Status...
Thanks in advance,
Vinodh.

hi,
go to SE41 ,open ur PF status open all the bars than go to >>>>
system > list > save > local file > name of ur file (unconverted)
by u can seen ur PF status image , u can not uploaded but can make by seeing this,
hope it will help u
make the points if yes
with regards
chetan vishnoi

How to copy GUI status to new program

Hi all,
In report A, i have GUI status with lot of menu bar activities. i need to create one more report B, with the same GUI status. Is there any option to copy/download from Report A to paste/upload to the new report B.
Note: Both the Reports are in different SAP Systems.
Please suggest.
Thanks.
Regards,
Venkat
Edited by: VENKATA PRASAD BATHINAPATLA on Sep 19, 2011 8:39 AM

Hi,
You can do this:
go to Transaction se90. Drill down to Program library -> program sub objects -> Double click on GUI Status.
In the program name enter Your PROGRAM NAME and press execute. now select check box beside <Your GUI STATUS which you want to copy>. and in the menu click on GUI Status -> Copy.
Now copy it to ur B report pf status.
or
goto se80 select Program enter your program name then under GUI Status right click on your gui ststus which you want to copy and press copy and enter your B Report name.,
hope this helps u.,
Thanks & Regards,
Kiran

File upload, download using ADF UIX and not JSP

I have examples for the file upload, download using JSP
But I want to use ADF UIX. Look and feel in this is impressing and I want to use this. Any one have example for this.
Users will select a file from their desktop
This will be stored into the database (Any document. Word, Excel)
When they query the records then the UIX column need to give a hyperlink. Clicking on the link should prompt to download the file to the local system

Sure, I use the Apache Commons File Upload package, so that is what I will discuss here ( [Commons File Upload|http://commons.apache.org/fileupload/] ).
The Commons File Upload uses instances of ProgressListener to receive upload progress status. So first create a simple class that implements ProgressListener:
public class ProgressListenerImpl implements ProgressListener {
    private int percent = 0;
    public int getPercentComplete() {
        return percent;
    public void update(long pBytesRead, long pContentLength, int pItems) {
        if (pContentLength > -1) { //content length is known;
            percent = (new Long((pBytesRead / pContentLength) * 100)).intValue();
}So in your Servlet that handles file upload you will need to create an instance of this ProgressListenerImpl, register it as a listener and store it in the session:
ServletFileUpload upload = new ServletFileUpload();
ProgressListenerImpl listener = new ProgressListenerImpl();
upload.setProgressListener(listener);
request.getSession().setAttribute("ProgressListener", listener);
...Now create another servlet that will retrieve the ProgressListenerImpl, get the percent complete and write it back (how you actually write it back is up to you, could be text, an XML file, a JSON object, up to you):
ProgressListenerImpl listener = (ProgressListenerImpl) request.getSession().getAttribute("ProgressListener");
response.getWriter().println("" + listener.getPercentComplete());
...Then your XMLHttpRequest object will call this second servlet and read the string returned as the percent complete.
HTH

Urgent : file upload / download functionality in oracle portal page

Hi friends
I am new to portal development and am working on oracle portal 9i rel2 . I need to know how to put the file upload and download functionality in any page. the functionality given in oracle portal user guide is not user friendly (i.e in the content area add item of type file" ) .... i need to now is their any way to achieve the simple , one button click upload download functionality ..like we do in yahoo mails etc.
any help will be highly appreciated.
regards
Dheeraj

Well, I do not know the exact location of the document, however you can find the document to do this in modplsql User Guide ..(File Upload/Download).
I am pasting some hint:
e.g.
Create an html form..code something like this:
<html>
<head>
<title>test upload</title>
</head>
<body>
<FORM enctype="multipart/form-data"
action="pls/mydad/write_info"
method="POST">
<p>Author's Name:<INPUT type="text" name="who">
<p>Description:<INPUT type="text" name="description"><br>
<p>File to upload:<INPUT type="file" name="file"><br>
<p><INPUT type="submit">
</FORM>
</body>
</html>
Create a table
(who varchar2(..).
description varchar2(..),
file varchar2(..));
Your procedure something like this:
procedure write_info (
who in varchar2,
description in varchar2,
file in varchar2) as
begin
insert into myTable values (who, description, file);
htp.htmlopen;
htp.headopen;
htp.title('File Uploaded');
htp.headclose;
htp.bodyopen;
htp.header(1, 'Upload Status');
htp.print('Uploaded ' || file || ' successfully');
htp.bodyclose;
htp.htmlclose;
end;
You should be able to download/access the file using the following URL format:
http://<host>:<port>/pls/<dad>/docs/<file_name>
Where file name is = Look for the value in the "myTable" > file.
Do tell how you get on this.
Thanx,
Chetan.

Gui status page up page down

how to setpage down and page up in ALV report.
i assign p- p++ fcode in gui status.
scroll line to last page is not working

HI
GOOD
GO THROUGH THESE LINKS
http://help.sap.com/download/documentation/additional/getstart/470/Getting_Started_470_EN.pdf
http://searchsap.techtarget.com/searchSAP/downloads/Teach_yourself_SAP_C20.pdf
THANKS
MRUTYUN

Web interface upload/download?

Hi,
We need to have an area on our site for each of our customers to log in to their own area that they can upload files to us and download any files we have left for them. We have this all set up and it's fine with FTP, but more and more people seem to be allergic to using FTP software.
We'd like it to be a simple web interface like "YouSendIt" or something like that. Is there a way to enable this in SLS 10.6? If not, anybody know of a 3rd party solution that will work, free or paid?
We also need to have automatic notification when they have uploaded files, like an email to multiple people.
Thanks a lot!
Scott

There's nothing built-in to Mac OS X Server that will do this, but you have options.
You could roll your own solution using PHP or other web-based scripting language. It may take some time, though, depending on available technical resources.
Alternatively you can look at third party solutions. Two that come to mind include Rumpus and CrushFTP.
Both support both FTP, SFTP and web-based uploads/downloads, with quotas, restrictions, notifications, etc.
CrushFTP's interface is textbook awful, though, so bear that in mind if your want a pretty GUI to manage the server.

Storage area for GUI status Z_FI_UPLOAD_FIDOC 100 too small

Hi,
I have created a program for uploading and posting open items aso. I've gathered items in an internal tables and tried to display on ALV list with tree for correct and incorrect items. When table contains more than 1000 items ( not all in one document but 2 items for every single doc), ALV displays but after awhile I get the error message 'Storage area for GUI status Z_FI_UPLOAD_FIDOC 100 too small' and next step process leaves the program to initial SAP screen without dump. Error doesn't occur when item lines less than 1000. The detailed message is:
+Storage area for GUI status Z_FI_UPLOAD_FIDOC 100 too small
Message no. 00261
Diagnosis
The memory area of the basis software for the GUI status is too small for the requested status. The following is stored in this area:
Administration information in fixed length
Menu structure, F keys and push buttons of a status
The texts of the complete interface (not just of the status)
The active and the requested Excluding list (SET PF-STATUS... EXCLUDING ...).
System Response
Termination as presumably the system is unable to continue processing.
Procedure
A short-term solution might consist of leaving off the EXCLUDING for the current SET PF-STATUS...
Clear up the interface affected: in the Menu Painter (Transaction SE41), choose Utilities -> Unused objects.
If it is an interface with a large number of statuses, it may be possible to take the interface apart.
This is often possible for interfaces belonging to a function group that supplies GUI statuses for multiple programs (these programs call up function modules of the group that mainly contain a SET PF-STATUS command).
If the above solutions will not work, your system administrator will have to enlarge the profile parameter "ztta/cua_area".
Note that profile parameter "ztta/short_area" must be at least 6 times as large as "ztta/cua_area".+
There is no unused object in my GUI. Is it connecting with number of items or should I ask system admin to enlarge mentioned parameters?
Thanks for quick reply in advance,
György
Message was edited by:
        György Jakabovics

Now I know what the problem was.
Message was edited by:
        György Jakabovics
Message was edited by:
        György Jakabovics

How to get GUI Status(Push Buttons) in ALV Report

Hi Friends
I have a requirement in a way that:
Once selection-screen was processed,an ALV report has to come and above the ALV List,I need a custom GUI Status(4 Push Button) with Push Buttons Logic.
Once I had clicks on thesse push button,I need to display one more ALV List and above this List,again I need a custom GUI Status(2 Push Buttons) with Push Buttons Logic.
Can anyone throw some light how we can achieve this.
Thanks for your cooperation!
Regards,
Madisetty

data: rt_extab type slis_t_extab,
        g_ucomm like sy-ucomm ,
        g_selfield type slis_selfield.
form alv_display .
call function 'REUSE_ALV_LIST_DISPLAY'
     exporting
     i_callback_program             = g_repid
     i_callback_pf_status_set       = 'PF_STATUS'
     i_callback_user_command        = 'USER_COMM'
       it_fieldcat                    = it_fldcat
      tables
        t_outtab                       = it_final1
perform pf_status using rt_extab.
perform user_comm using g_ucomm g_selfield .
endform.
form pf_status using    p_rt_extab.
set pf-status 'PF_STATUS' excluding p_rt_extab.
endform.
form user_comm using    p_ucomm like sy-ucomm
                         p_selfield type slis_selfield.
data: l_row type i.
case p_ucomm.
    when 'DISPLAY_PO'.
      loop at it_final1 into wa_final1.
        if wa_final1-sel eq 'X' .
          l_row = l_row + 1.
        endif.
        if l_row gt 1.
          message e004.
        endif.
        clear wa_final1.
      endloop.
      p_selfield-fieldname = 'SEL'.
      read table it_final1 into wa_final1 index p_selfield-tabindex .
      set parameter id 'BES' field wa_final1-ebeln.
      call transaction 'ME23N'.
endcase.
endform.
*create user interface for gui status by double clicking on 'PF_STATUS'.
*Check the above sample code .

Gui status - upload / download

Similar Messages

Maybe you are looking for