GUI Tool for Cisco 6500 Chassis
Hi
We have a requirement to allow our Service Desk to amend vlans on switchports on a range of 6509 chassis.
Is there a tool, (like SDM for routers) which would allow them to do this using a GUI? We need to keep it as simple as possible as the Service Desk users have no experience of configuringCisco kit.
We have Cisco Prime, however, I can't see anything which shows a graphical representation of the actual switchports on a chassis?
If there isn't a Cisco product which supports this, does anyone know of a third party app which would do the job?
Thanks
J
Hi datamodule, i see that you are looking for a 24 ports 1/10G SFP module for the Catalyst 6509E. From what i am looking at it's either 1G or 10G. Please check this link for further assistance: http://cs.co/9000YTBE. Feel free to message me for further assistance.
Thanks,
Angela ([email protected])
Similar Messages
-
The Group Policy Management console
Right click on "Group Policy Results" and use the assistantis there any gui tool for gpresult
This topic first appeared in the Spiceworks Community -
Gui tool for browsing environments
Does anyone know of a good, preferably free, gui tool for browsing environments and performing queries on them?
Hi,
I am aware of oXygen and Stylus Studio.
Ron -
GUI Tool for Image Analysis (delimited ascii file)
i've created a Java GUI Tool for Image Analysis. It does length calculation and locate the coordinate of centroid of an image...the problem now is how do i save the results in a delimited ascii file??
Create a FileOutputStream, use that to construct a PrintWriter, then use the PrintWriter as you use System.out. Print out the data, then append the delimiter manually after each set of data.
To get the file, the simplest ways would be to hard code an output file name or at least have a text field so the user can enter it. If you want it to look more professional, use a JFileChooser.
I hope this helps!
-JBoeing -
Security monitoring tool for Cisco ASA
Please suggest a checp and best security monitoring tool for Cisco ASA devices.
You can use ossec, open source tool installed on linux:
http://www.ossec.net/ -
Is there any GUI or console tools for managing services (LaunchAgents & LaunchDaemons) in Mac OS X?
It is becoming a really frustrating process to manage my huge list of launchers by hand on terminal, especially since most of the developers use really poorly named plist files for these.
I've been just fine managing many services in the *nix world (Debian, Fedora and CentOS mostly) and I have no problem using console or cli tools there, so why can't it be as easy on my Mac?
Oh, and I've got no intention of paying for this, I might just code it on my own if it doesn't exists...
- Thank You in advance.Thanks. The interface isn't the best one but it gets the job done.
Would recommend to anyone having the same problem... -
Does anyone have a recommendation for a good GUI development tool for SWING? We are doing everything by hand right now and it seems a bit tedious.
What are the best tools that automatically build the containers? layouts? different field types? listeners? graphics? etc....
ThanksHmm ok netbeans is smaller, but the size you posted isnt accurate for the Sun One studio Community Edition, which is the free version.
I downloaded the latest J2SDK + S1Studio for a total of 92 megs. If you download it alone I would presume its something around 80 megs.
I would have suggested netbeans but I'm not 100% sure it has the same gui editor than s1 studio... I know s1 studio is built with netbeans but I honnestly dont know the difference between them, other than probably a bunch of extensions that come by default with s1 studio. -
Hello,
A blob storage backup is scheduled to run daily, target is say mybackup. I'm wondering whether there is a Gui tool to automate revolving snapshots of mybackup. For instance day 1 to day 7 and the day 8 will replace day1?
Thank youhi Nic75,
I am not familiar which tool has this feature. However, I know we could do this feature using code. I suggest you could refer to those blogs:
https://gallery.technet.microsoft.com/scriptcenter/How-to-create-a-snapshot-b1dd8ba4
http://www.dotnetcurry.com/showarticle.aspx?ID=1072
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Triple Combo GUI tool for CUCM trace files analysis
Hi folks,
the link to the Triple Combo GUI tool to analyze CUCM trace files appears to be broken:
www.employees.org/~tiryaki/tc
any idea where the tool is gone or with whaht was is replaced?
thanks
best wishes
LucioHi Lucio,
you can try TranslatorX.
http://translatorx.cisco.com/index.html
//Suresh
Please rate all the useful posts. -
Does anyone (IBM, SUN, Borland, open_source, etc) have GUI tool or GUI editor for building JSF?
*Can I receive this forum at my email?I just got back from the JavaONE convention in SF and Sun had a demo of an IDE project that is in progess. It was called "Project Rave". It looked like a really great tool. It had drag and drop components for a database query, web services functionality, and all of your JSP form objects. I was really impressed and think it will be a great tool. They also said that it would eventually support Java Rich Client development as well. They said it would not be available until Fall or the end of the year.
-Andy -
Looking for Cisco 6500 E series 1/10 G SFP Module
I am looking for 24 ports 1/10G SFP module for my 6509E chassis and WS-SUP720-3B sup module.
I have found the following from my research
WS-X6704-10GE - 4 port 10G module which supports only 10G not 1G
WS-X6708-10G-3C - 8 Port 10G module which supports only 10G not 1G
WS-X6724-SFP - 24 Port 1G SFP module which supports only 1G not 10G
Thanks for your helpHi datamodule, i see that you are looking for a 24 ports 1/10G SFP module for the Catalyst 6509E. From what i am looking at it's either 1G or 10G. Please check this link for further assistance: http://cs.co/9000YTBE. Feel free to message me for further assistance.
Thanks,
Angela ([email protected]) -
Remote Command Tool for Cisco Routers/Switches
Is anyone aware of any tools or scripts out there which allow preconfigured commands to be remotely run again Cisco Router/Switches and display the output result?
I'm looking for a tool which I can give our Service Desk personnel that will allow them to select from a list of commands enter a target IP Address of a router/switch and then the tool will display the vlan table or the running config of a particular switch-port so they can see if its configured on the correct data vlan or its missing its voice vlan etc.
For example a Service Desk Operator needs to check what vlan a switch-port is on. So they open the tool, enter the switches IP address and the port number and select an option like "display a switch-ports vlan" and the tool will login into the switch in the background run a show command on the switch and then output the result.
Thanks.Check out rConfig. You will be able to run multiple instances of it i.e. one instance for your standard configuration backups and another for more specific configuration downloads info like show vlan bri commands etc for service desk staff to view.
You could also use the IOS menu function and create menus or role based access on each of your devices for your users.
Regards
Stephen
==========================
http://www.rConfig.com
A free, open source network device configuration management tool, customizable to your needs!
- Always vote on an answer if you found it helpful -
How to create custom GUI interface for Cisco router?
Hello,
I am working on a Cisco solution and I have my router configured for the solution I need. However, if a non-cisco person needs to use my solution then I think he will need a GUI interface which will have few "buttons" which when clicked will run some Cisco commands on Cisco router to make it work. Is there a way to design such GUI interface which is compatible with Cisco routers? I know Cisco has SDM, but that is too involved and detailed, which is useful only for people who know atleast a little bit about Cisco. Here I am looking at crowd who will have 0 knowledge of Cisco.
Please let me know if something like this can be done. If yes, how and how easily?
Thank you.There are lots of ways to do this - you can use SNMP or even HTTP to push or pull commands from Cisco devices. How easy it is to create a GUI depends on your programming skills. I would guess a simple web page triggering backend scripts would be the easiest way to do this.
-
Dear All,
I would like to inquire that if there exists any GUI based tool that can provide the same functionality as ANT(for building the project), plz inform me with details.
Thanks and Regards,
Suhas PolHi mlk,
actually i am looking for a tool which will be any IDE independent and can be used to build the build.xml file thru some GUI.
Thanks and regards
Suhas Pol -
Where is PSIRT lookup tool for cisco IOS?
Can someone give me the link to a tool that will allow me to paste my version of IOS into and then get a listing of all known advisories/responses?
thanks,I think the following link is what you may be looking for:
http://tools.cisco.com/security/center/selectIOSVersion.x
Maybe you are looking for
-
Check on PO Creation for vendor Open Advances
Hi : There is a requirement from the client . They want to put a check on PO creation against vendor . It is if for example vendor has open advances exceeding 5 million then system should check it at the time of PO creation and should stop or warn th
-
How to access additional supporting jar files from EJB JAR?
Hi, How can we access additional supporting jar files as part of my EJB JAR . I don't want to keep them in the top level because other EJB JAR files also has the same jar files(code in the classes in the jar is slightly different) can I keep the addi
-
Can't send photo from iPhoto 9 to Photoshop Elements 10.0
I just got a new iMac with Lion 10.7.2 and Photoshop Elements 10.0. In iPhoto 11. I set the preferences to use Photoshop Elements to edit photos. When I double click on a photo, Photoshop Elements Editor comes up, but there is no photo. There has bee
-
Newbie question - how to save images out of an fla file
I have what I'm sure is a very basic flash question. I have a flash movie (swf) and the accompanying fla file. I can open the fla file, and see all the images used in the file (symbols in the library), but how can I export or save one of these images
-
I am having issue with iphone 5 bluetooth , not able to connect honda CRV
I am having issue with iphone 5 bluetooth , not able to connect to my honda CRV