Guide for configuring the Claims module for India Payroll

Hi all,
I am configuring the Claims module for India Payroll.
Can anyone please help me with a step by step guide.
Currently I have maitained a few types of claims under spro->Payroll->India Payroll -> ESS->Advance Claims->Reimbursement Types->Maintain Attributes of Reimbursement Types.
But when I try to submit any claim request from portal, its giving the error "Employee number not maintained for : 00005007".
It would be helful if anyone can provide help regarding activating the claims workflow (WS18900023) as well.
Thanks in advance,
Sattam.

Hi Praveen,
Thanks a lot for ur reply. I have done those configurations, still I will check again.
I have identified another error. When I try to add a start event to the worlfow WS18900023, and activate it.....its giving the error "BUS1009 cannot be executed" .
Is this the cause of malfunction? If yes how to solve it?
Pls Help
Sattam.

Similar Messages

Configuring the Destination URL for the Adobe Document Services

hi all,
I am going through the documentation for "Configuring the Destination URL for the Adobe Document Services " at :
http://help.sap.com/saphelp_nw2004s/helpdata/en/02/560f41ca73d349e10000000a1550b0/frameset.htm
I am not able to understand 7th step
7. Define the user name and password. To find out how to create the user name and password for the Adobe document services, see Creating a User for Basic Authentication in the document Adobe Document Services Configuration Guide. You can find this guide in the SAP Service Marketplace under Quick Link /InstguidesNW04.
In our scenario
We are running NW04s SP11 on 2 machines
1) 32-bit machine with ADS and credentials properly configured on Web AS for Java installation
com.adobe AdobeDocumentServices null (710.20061024154505.342190)
com.adobe AdobeDocumentServicesEjbClientLibrary null (705.20060407121920.289077)
sap.com SAP-JEE 7.00 SP11 (1000.7.00.11.0.20070201154700)
sap.com SAP-JEECOR 7.00 SP11 (1000.7.00.11.0.20070201154700)
com.adobe DocumentServicesBinaries2 null (710.20060629085312.115621)
com.adobe DocumentServicesConfiguration null (710.20061024154505.342190)
com.adobe DocumentServicesDestProtoService null (710.20060821084105.325745)
com.adobe DocumentServicesLibrary null (710.20060629090137.115621)
com.adobe DocumentServicesLicenseDatabase null (705.20051005114147.242570)
com.adobe DocumentServicesLicenseManager null (710.20060929113452.336248)
com.adobe DocumentServicesLicenseService null (710.20060929113452.336248)
com.adobe DocumentServicesLicenseSupportService null (710.20060929113641.336248)

2) 64-bit machine with portal installation on Web AS for Java, with ESS and MSS
sap.com/SAP-JEECOR 7.00 SP11 (1000.7.00.11.0.20070201154700) 20070308153304
sap.com/SAP-JEE 7.00 SP11 (1000.7.00.11.0.20070201154700) 20070308153213
sap.com SAP_ESS 600 SP7 (1000.600.0.7.12.20070314050106)
sap.com SAP_MSS 600 SP7 (1000.600.0.7.4.20070321052655)
sap.com tc/wd/webdynpro null (7.0009.20060804145649.0000) 

Why do we have to create a new user for the server which is consuming the web service? We already have an user "ADSUser" defined for the Web AS server which has ADS services deployed.
I have opened this thread to solve the previous unanswered question I posted on SDN Empty area in place of Interactive form. .
One more thing the adobe print forms of ESS [Total Compensation Statement and Salary Statement] are rendering properly, only the ones with Interactive ability or not.
thanks,
Sanketh

Hello Sanketh,
1. To access the NW04s configuration guide,
 - Go to https://service.sap.com/adobe
 - On the left frame (tree), under Adobe > Media Library > Documentation
 - On the right had pane you will find the link to the NW04s Configuration guide
2. The link that you have mentioned below details the steps required to be carried out on the client machine that consumes the Adobe Document Services. In our case that is the j2ee engine on which your Web Dynpro application is running. It could be the same physical machine with two different j2ee instances hosting Web Dynpro and ADS or it could be two different physical machine or a single machine having a single instance of j2ee engine hosting both the Web Dynpro and the ADS.
You do not have to create a separate username and a password on the consuming machine but you need to configure the Web Service client proxy to point to the ADS (maybe hosted on a different machine) with the username and the password created on the ADS server. As you have mentioned, you have already created such an user on the ADS (ADSUser). This user authentication on the client machine (consuming server - Web Dynpro) would be required at the runtime by the j2ee engine to authenticate itself with the ADS.
Best Regards,
Krish

Guide to configure the UCM so i can start from browser

Please provide me the configuration detail for configuring the UCM server can start or stop from admin server tab( like as in 10gr3).
Now we have an upgraded our ucm server from 10gr3 to 11g, But in 11g we need system access to start the ucm but we not want to give system level access to user.
So please some one guide me for configuring the UCM server for start and stop from browser.

- So please some one guide me for configuring the UCM server for start and stop from browser.
-- You can start it from browser - from weblogic admin console and/or Enterprise Manager. Note that there are some prerequisites (e.g. UCM must be defined as a managed server, you will need to start the WLS admin server, etc.) I'd also recommend you to get some weblogic server administration basics to be able to perform these tasks.
Jiri is correct. You have to define UCM (or UCMs, if you are in a clustered environment) as a managed server. I think it's the default option in installation.
The steps you could do are:
1 - Start the WLS Admin by console and access it in http://yourserveripaddress:7001/console.
2 - In the "Environment" tab, in the lef side, you have the "Servers" option , click it
3 - Now you can see all the servers you have installed, click in the "Control" tab
4 - Check the servers you want to start and click "Start"
5 - Click on the "Update" icon to see the current status of the server.
6 - If the status changes to "Running" the server is up.
I think it's all.
Fernando

Configuring the authentication scheme for a web application

Hi all,
We have a requirement to configure the authentication scheme for a web application where some set of users should access the application using basic LDAP (userid/password) authentication and some using digital certificate authentication.
Since the deployment descriptor (web.xml) allows only one directive for auth-method in logic-config, we want to know if there is any other way to achieve this requirement. We are thinking of a custom login module approach. But we are not able to figure out how to configure the auth-method at runtime from the login servlet.
Please let us know if there is any other approach to achieve this.
I will be thankful if any body shares any specific solution to this issue.

This forum is probably not the correct one to ask in. It's more related to the web container than Java Programming.
Kaj

How to findout the Function module for a particular object

Hello friends,
   Related to my thread, there was one thread in the forum,to find out the function module for a particular object.I tried the solution provided my our experts but couldn't got the results.Thats why i am putting this thread again.
I want to find out the function modules used for the particular object, i.e. Production order.
   solution i tried is, first go to T.C SE37, then in function module field put the object name like Production order and enter, than it will show another screen, there also put object name in function module field and than press enter, it will show all the function modules available for that object.
    So could you guys help me out to find out where i am wrong in the process of finding out the function module for a particular object.
                       Plz don't bother abt the point.Helpful answers will definitely get awarded.
                            Thanking you guys for your valuable support till now and hoping to get in future too.

Dear
When the problem is solved please give points too. Otherwise why people will help others, give time and share their valuable knowledge. This will build up self confidence.
If not solved and closing, then mention the difficulties what u exactly looking for. Simpy closing is not enough because who ever is providing solution will not able to know the real problem.
How to give points I believe u already know that and need not explain.
I had seen many times this problem with others too. Even if the problem is totally resolved they give 2 in stead of 10.
Edited by: BNR on Sep 21, 2008 6:10 PM

Error CIM_ERR_FAILED - Configure the integration server for sld

Hi,
I´m running the Configuration Wizard SLD in "PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage". In step 33/142 Configure the integration server for sld, I got following error:
Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement
Someone help me?
Regards,

The version is 7.0. I skip this step and finished with sucess. No run the step:
PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage Cancelled
PI_01_This template checks if the necessary services are started Cancelled
PI_05_This wizard will configure the integration server for sld Incompletely executed
These steps are with the same error.
Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement

What is the equalent module for SAP BASIS in ORACLE

Hi,
This is Krishna, i am new to Oracle, i am working as SAP BASIS Consultant and now i am planing to shift oracle please anybody help me " what is the equalent module for SAP BASIS in *Orcale*?".
Thanks in Advance to Everybody.
Krishna,
SAP BASIS Consultant
Edited by: user12292549 on Nov 30, 2009 11:41 PM

Hi,
Just use Trinidad's, I don't think 11g has an equivalent and Chris suggestion won't really work in this case as visible="false" is the same as rendered="false" for decoding purpose and you want it to be decoded in your case. Another poor man's solution would be
<af:inputText value="..." inlineStyle="display:none;"/>Regards,
~ Simon

Trying to install the output module for Bridge CC but there is no extensions folder for Windows

I am trying to install the output module for Bridge CC on a Windows system, but there is not an extensions folder in my Bridges CC folder. I have seen several discussions about this issue for Mac's but nothing on a PC. Suggestions that I could use to remedy this situation? - Thanks!

For installing it please download the package as listed in the below mentioned link and follow the install instructions.
http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html
Make sure that you have the most recent version of Bridge CC(6.0.1) installed.
Please follow the below mentioned steps:
Copy the Adobe Output Module folder (not the AOM_Package_[OS] folder) into the Bridge CC Extensions folder in the appropriate location as mentioned:
Windows 64-bit:                Go to C:\Program Files (x86)\Common Files\Adobe\Bridge CC ExtensionsWindows 32-bit:
               Go to C:\Program Files\Common Files\Adobe\Bridge CC Extensions
2.   Copy the AdobeOutputModule.workspace file into the Workspaces folder under the Bridge CC Extensions folder (location as mentioned in Step 1).
Do let me know if this helps.
Regards,
Ashutosh

Configure the Change Log for the activity

Hi to all,
I would like to know if it is possible to configure the "change log" for the activity.
Thanks in advanced,
Matte

Carlos,
Can you be more specific on the term 'Configure'. Change log is automatically generated by SBO. The only thing you can change is the numbers of Historical instances of the log
Administration > System Initialization > General Settings.......Services Tab...History or Log Settings. Be default it is 99 instances.
Suda

Where can i download the weblogic modules for apache (source/precompiled)

I have wandered the wonderfull world of the BEA website for 2 full days now and still am not an inch closer to de download site for the weblogic module for apache. That is, i have apache and need to add the weblogic module to it.
Complications are Solaris 10 and apache 2.0.55. So the latest versions of OS and webserver. Is there a precompiled module available or can i get the sources somewhere?
I do have a working module for apache 2.0.53 if someone can confirm that this is supported for 55 that would be fine by me.

At times when the sources were available I tried to build it on a "new" platform (Solaris x86 32bit) and I can tell you: it's NOTHING that is obvious. Building OpenOffice or Mozilla may appear like an easy task. It took me months to get there and to be able to just build the 'build tools'.
On top, many of the sources are (historically) written in a Pascal dialect and are transferred to C with an own precompiler so there are three languages used (C, C++ and Pascal) - so it's a pretty hard (next to impossible) job to learn some algorithms from those sources.
See also here:
http://cjcollier.livejournal.com/177628.html
http://home.snafu.de/~dittmar/sapdbdev/
and just to get an idea of the modules and their structure:
http://home.snafu.de/~dittmar/sapdbdev/sapdbModules.txt
Markus

Want to know the function module for Partial Payment F-28 in FI

Hello all
i want to know the Funtion Module for the documents in which Partial payment have been made .
For that i have the customer and invoice number .

Hi,
Use the FM FI_TERMS_OF_PAYMENT_PROPOSE for calculating the Payment due date call function 'FI_TERMS_OF_PAYMENT_PROPOSE'
hope it will help u.
thanks,
Neelima.

How to find the function module for standard tables.

Hi
Could any one please tell me how to find the standard function module to update the standard tables
Thanks & Regards
Sowmya

Hi sowmya,
To find the function modules for standard tables you go for a where used list of that particular table and check only function module interfaces checkbox...
and more over you can go for DB_UPDATE_TABLE will be the function module for updating database table..
Hope this information would help you
Regards
Narin Nandivada

Step by step process in configuring the enterprise structure for MM in IDES

Can any one give the Step by step process in configuring the enterprise structure for MM in IDES.

check below link for enterprise structure in MM.
http://www.docstoc.com/docs/10940744/SAP-MMWM-Configuration-Doc
If you are new to material management please refer to below thread which will be very useful.
New to Materials Management / Warehouse Management?

Designing utiliy for configuring the devices??

I want to make my own utility for configuring the daq devices like measurement and automation explorer.
I want to design the user interface on labview and dont want to use DAQ Assistant and MAX.
I am not able to search which device are connected to my pc.presently I am working on NIUSB-6009
Is there any VI or Prorperty node which can give the information of connected devices like maxor Daq Assistant???
Regards,
VG

Hello Vivek,
try the "system node" and the "device node" as starting point. In LV 8.5 you find them under Measurement I/O --> NI-DAQmx -> Advanced --> I/O Constants. The attached picture shows both nodes in action. But I think you get the DAQmx devices only.
HTH
Uli
Attachments:
SystemNode_DeviceNode.png ‏24 KB

Required JAR's for developing custom adapter modules for PI 7.31 SP 09

Hello experts,
I have a new development wherein i have to consume .xlsx files in PI 7.31
i have gone through a lot of blogs but did not find any relevant JAR's specially for PI 7.31, I am planning to go for custom module development for conversion of .xlsx file into xml
so need your help for finding the JAR's for PI 7.31 and also some custom JAVA source code for conversion of excel spreadsheet into XML.
Regards,
Sushant.Shinde

Hi sushant,
The module key seems correct ffor you. But the blog you shared is cozy. I developed 4 adapter modules using a document. Please refer that.
And NWDS EHP1 is available you can use that to be perfectly sure on compatibility.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0b39e65-981e-2b10-1c9c-fc3f8e6747fa?overridelayout=true
use the above document to verify the steps you followed-
Please provide following screenshots
NWA->configuration->infrastructure->Application Modules-> and search for *xlmodule*
if you find your module then click on it and at the bottom there will be a window with JNDI Name. Share that JNDI name and use that JNDI name in your Module. (localejbs/JNDIName).
Also go to NWA->TroubleShooting-> JNDI Browser and see where is your Adapter module situated. I mean under which directory. Either directly inside root/localejbs/ or root/localejbs/sap.com.
Please verify your steps according to that and redeploy and share result.
and Go to NWA- Site Map-> find Start & Stop
In that go to Java Applicaitons Tab and search for your module. It must be started. If it is stopped try starting it.
Regards,
Vikas

Guide for configuring the Claims module for India Payroll

Similar Messages

Maybe you are looking for