Guide layer stops working when I change a movieClip

Hey all,
So I have a few things moving along a common guide layer.
There are 7 objects, and depending on what is happening on screen,
i want to have some of the objects appear and disappear. I have all
of the objects _alpha set to 0, but when something triggers it, I
change a few of them to _alpha=100. The problem is that, at that
point, they stop moving along the guide. I know they move because
they will be halfway across the screen, but then stop moving
immediately after I call the change in _alpha. Any ideas? Can you
not change the properties of a movieClip while it is moving on the
guide? Thanks...

Be sure to change the symbol to a button in both the library and in the properties panel.  If you only change it in the properties panel, the tmeline will not change.

Similar Messages

  • Why is the Time Machine icon in menu bar not spinning when backing up? It stop working when I changed to Maverick.

    Why is the Time Machine icon in menu bar not spinning when backing up? It stop working when I changed to Maverick.

    my imac came with lion and don't think it ever span with lion and mtn lion and now maverick not sure if it's a setting

  • Msn Messenger for Mac stops working when i change the user!! Help?

    i know this is not mac's fault but i wanna know if anyone knows how to fix it or what to do with this, this is what happens:
    i installed msn messenger and signed in with my account, and everything works fine, then i lend my computer to my sister and she changed the account in msn so she could sign in with her email address, but she couldnt logg in it said "service is probably unavailable". When i got the MB back i tried to log in with my account and it said the same thing, i messed around with it a little bit and i dont know what i did but it started working again with only my account. Today at school a friend did the same thing my sister did and screwed it all up again, now i cant log in with my account and i dont know what to do ive tried messing with it a little but didnt work, any1 with this problem? help plz

    that usuall happens when you are not connected to the internet. if you were running wifi your connection could have been lost for a moment and then recovered.

  • TS1589 my airport stopped working when i changed its location within the same network (wired)

    Please help....I replaced my airport express with an apple tv and moved the airport to a different location within the same wired network and the light continues to flash amber. I know the ethernet connection is good and I have tried restarting the modem/router/airport with no change in status and when I look in the airport utility software, it reports that it cant see it. When I move back to its original location, the light goes green.  What happened and how can i correct this issue? Thanks very much for any assistance.

    the weird thing is that all Ive done is move its pysical location....my house has ethernet ports in every room all running through a common upstream router which in turn is connected to a dsl modem. At this point Ive hard reset the AX back to factory settings....now the AX utility sees the AX but shows me that it has a total of 3 problems. 1) Internet connection...2) no DNS servers...3) default settings. When I highlight "default settings" the info reads "this AX base station has default settings. You should configure it to connect to the internet, secure the wireless network, and provide a password. I assume that if I correct this, the other 2 troubles should take care of themselves.  At the bottom of the page there are buttons that say...help, revert, update and a drop down menu that says default settings, recovered settings, create profile, edit profiles. not sure where to go from here. thaks for taking the time to help me.

  • Iphone4 Email Stopped working when I changed my password

    Hey all, I spent days trying to figure this out. I am sure this is in the manual somewhere but thought I would save you time if you have the same issue.
    I change my MSN email password often to protect myself. After getting my new iphone 4 (Verizon), I changed my password on my email accounts. As soon as I changed the password, I went into the iphone settings and changed the setting there also. Then I could get emails but not send emails. After many searches, and playing with the iphone, I figured out why the email was not sending messages.
    In the iphone4, you have change the new password for emails like msn in BOTH incoming and OUTGOING servers. You have to change the password twice for each email address.
    Go to settings on the iphone, mail, contacts, calenders....select the email account that you changed the password for and then under INCOMING Mail Server, change the password to the new one. Then go down to OUTGOING Mail server, select, then it goes to Primary Server screen, so select the one at the top. Then change the password under OUTGOING server.
    I hope this helps!!

    Hello ginger99967,
    I really want to help you get this resolved! Being able to use messaging is very important, whether it be for business use or personal use. I do, however, need to review your account in order to see what the issue is and find a solution for you. I'm sure I can help, once I can get the information I need.
    Please send me a DM (Direct Message) with your name and mobile number. I am happy to assist you.
    Thanks!
    Christina B
    VZW Support
    Follow us on Twitter @VZWSupport

  • Project stops working when attempting to change working times

    Project stops working when attempting to change working times.  I'm running a 1000+ task project, fully resource loaded with multiple resource calendars.  After two months of normal operation, it now appears that Project has deleted (or corrupted)
    one of the base calendars that several of the resources use.  Now, when attempting to change working time for a resource, sometimes I can get as far as a blank space where the base calendar name should be and an error message stating that there is a problem
    with the resource; other times the program just stops working and shuts down.  Any ideas on how to restore the file?  

    I agree with John. Save the file as XML and reopen it. Also, if you have backup of the file, use Organizer to copy the base calendar from the backup. To use organizer, open both the files in Project.
    1. In Project 2007 or earlier versions, select Tools > Organizer. In Project 2010 and later, select File, Info > Organizer. 
    2. Click Calendars tab.
    3. Change the Calendars available in: drop down on the right to current file, and other drop down to backup. This will list all the base calendars in each file.
    4. Select the base calendar in the backup. Click the "Copy >>" to restore the base calendar.
    Sai PMP, PMI-SP, MCTS Project, MVP Project

  • Reports with prompting stop working when moved from Crystal10 to crystal 11

    Issue:
    We are having trouble with Crystal Reports XI. It appears that the Crystal 10 runtime included the ability to process reports that used prompting. If we run the same report with the Crystal XI runtime, it fails.
    I can send a sample of the report.
    Error Dialog:
    Title: Internet Explorer Script Error
    Error Details:
    An error has occurred in the script on this page
    Line: 1
    Char: 1
    Error: invalid character
    Code: 0
    URL: file: /// C:/Program%20Files/Business%20Objects/3.0/crystalreportsviewers11/prompting/js/promptengine_strings_en.js
    Do you want to continue running scripts on this page?
    Yes/No
    Our Configuration:
    We use Merge Modules that install Crystal Reports through the browser via a CAB file that we created. It runs a setup executable
    The setup executable project that installs CR XI uses the following Merge Modules:
    CrystalReports11_RDC_Reportengine.msm
    CrystalReports11_RDC_Runtime.msm
    CrystalReports11_HotFix_Merge.msm (This is contrived by us from one of your hot fixes)
    Observation:
    When the install is finished, the folder structure under u2026. Crystalviewers11/prompting do not have any files like they do if we install the development environment.
    Question:
    What do we need to do to correct this situation?
    *why the reports with*
    *prompting stops working when it is moved from a Crystal 10 to Crystal 11*
    *environment.  I believe that it has something to do with Merge Modules*
    *because the files under the prompting folder do not populate with the*
    *merge module like they do with the full install of Crystal Reports.*
    Please help.
    Best Regards,
    Peter Freeman
    Edited by: Vivek Kumar Sharma on May 19, 2009 3:43 PM

    We have JDK 1.6 installed.  The License Merge Module is not related to
    this issue.
    The files under \Program Files\Common Files\Business
    Objects\3.0\crystalreportviewers11\prompting  are not being installed.
    If we copy files, into this folder structure the reports work.
    One of the Business Object's Merge Modules should install the files
    there rather than just an empty folder structure.
    I got was able to figure out how to enter a customer support message.
    They said that they could not support us because we were not on CRXIR2
    (Crystal Reports 11 Release 2).
    I found a download for CRXIR2SP4 (same thing service pack 4).
    I installed it the Merge Module names changed to include a "_5"
    Was:
    CrystalReports11_RDC_Reportengine.msm
    CrystalReports11_RDC_Runtime.msm
    CrystalReports11_HotFix_Merge.msm (This is contrived by us from one of
    your hot fixes)
    Now:
    CrystalReports11_5_RDC_Reportengine.msm
    CrystalReports11_5_RDC_Runtime.msm
    CrystalReports11_5_RDC_License.msm (should have been included)
    *CrystalReports11_HotFix_Merge.msm (not needed anymore)
    I will try to put a installer together with these.  If this work there
    will be some complexity around uninstalling the old one and installing
    the new one.

  • Why Ctrl+Tab stops working when opening a flash embedded page?

    This a huge pet peeve I have. Everytime I watch a video in youtube.com or megavideo.com, I can't just Ctrl+Tab to change tabs. I'll have to clic in some portion of the page without video to get it to work, but even that, isn't always the case.
    - jtbandes
    http://superuser.com/questions/12601/why-ctrltab-stops-working-when-opening-a-flash-embedded-page

    There are other things that need your attention.
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Shockwave Flash 10.1 r53
    See:
    *http://www.mozilla.com/plugincheck/
    Update the Flash plugin to the latest version.
    *https://support.mozilla.com/kb/Managing+the+Flash+plugin
    *http://kb.mozillazine.org/Flash
    *http://www.adobe.com/software/flash/about/
    Update the Adobe Reader plugin to the latest version.
    *https://support.mozilla.com/kb/Using+the+Adobe+Reader+plugin+with+Firefox
    *http://kb.mozillazine.org/Adobe_Reader
    *http://get.adobe.com/reader/otherversions/

  • Excel has stopped working when I try to launch Excel 2013 Powerpivot

    Redirected from the Win 7 forum: (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/excel-has-stopped-working-when-i-try-to-launch/01460690-abab-495f-ab5f-904f72f88668)
    My system is a Windows 7 machine, 64 bit
    I previously had Excel 2010 32bit with 32 both Powerpivot installed.  However I am currently evaluating 64 bit Excel 2013 with Powerpivot for my company so I uninstalled Excel 2010 and installed an evaluation copy of Excel 2013 64 bit.
    However whenever I launch Excel, enable Powerpivot, then click any of the Powerpivot buttons it gives me an error saying "Excel has stopped working".
    I took a look in the Windows events logs and found:
    Faulting application name: EXCEL.EXE, version: 15.0.4420.1017, time stamp: 0x506741b5
    Faulting module name: mscorwks.dll, version: 2.0.50727.5477, time stamp: 0x5265c8ee
    Exception code: 0xc0000005
    Fault offset: 0x00000000002ba203
    Faulting process id: 0x3e8c
    Faulting application start time: 0x01cf52a7644eda9d
    Faulting application path: C:\Program Files\Microsoft Office\Office15\EXCEL.EXE
    Faulting module path: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\mscorwks.dll
    Report Id: afa4f824-be9a-11e3-94ac-415645000030
    I have tried uninstalling and re-installing as well as doing a Repair on my .net framework, which is the latest version.

    You can go to check the dll file, what's size of this dll file?
    If the file size is 0 byte, you can check the link below:
    http://forums.steampowered.com/forums/showthread.php?t=2735528
    Also you can go to check the disabled items (File->Options->Add-ins->Disabled items->Go) to see if any dll file was disabled.
    In addition, Isn't the latest version of .NET Framework supposed to be 4.0?(Not quite familiar with this)
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee
    the accuracy of this information.
    Wind Zhang
    TechNet Community Support

  • Elements 11 program stops working when photo collage opened when 297 x 210 selected

    Adobe Photoshop elements 11 program stops working when photo collage opened when 297 x 210 selected>Running Windows 8.1

    Hi Jane
    There are sometimes problems calling up the template from the media database. Why not design your own? It is possible to make a collage manually in Expert Mode and its quite easy.
    Click File >> Open and select all of your photos
    That will add them to the project bin
    Then select File >> New >> Blank File
    Select background color White (or whatever you prefer) and add your width and height for your final image (set resolution 72 for web usage or 240 to 300 for printing) then click OK
    In the project bin click your first photo and drag it up into the main window on top of your new background.
    Click on the move tool and click in the center of the photo and drag to arrange it where you want on the background - you can hold down the shift key to maintain original proportions whilst dragging the corner handles of the bounding box to get the size you want.
    Do the same with the next photo (drag it up into the main window) and use the move tool to position it. Then continue with each image.
    Finally Click Layer >>Flatten image and save as jpeg. (Save as PSD if you want to preserve the layers for editing again)
    N.B. as you add images they get dropped in the center. So you need to use the move tool to drag them apart. Click in the middle of one and move it around, and then the others until you get them positioned as you want.
    When you click again with the move tool a bounding box appears around the image and you can drag out the corner handles to re-size your photos. Hold down the shift key when dragging the corner handle and that will maintain the proportions of the original.
    Finally click Layer >>Flatten Image and save your collage - you may then want to use the crop tool to cut away any surplus white canvas, and then re-save.

  • IPhone 5 data network stops working when using GPS

    Hello,
    I have a strange problem for some time now. The DATA connection in GPS apps stop working when navigating. When I use Google maps or WAZE apps the first time after rebooting the device, everything is working just fine for first address search, but after beginning the navigation, DATA network disappears only for the navigation app, browsing is working just fine (a bit slowly, but fine).
    Tried to factory reset the device few times, and changed the carrier provider, didn't help
    Any ideas??? 

    Hi liokap,
    Welcome to the Apple Support Communities!
    I know that it can be frustrating when applications you downloaded from the App Store do not function as expected. In this situation, I would recommend working through the troubleshooting steps in the attached article.
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Have a great day,
    Joe 

  • My camera is stop working when I try to use it!

    My camera is stop working when I try to use it!it close down when I open it..and it's been 2 days now that my telephone is very slow in everything..

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Iphone 6 always hangs/stops working when i turn on my cellular data. i have already switched my sim card. It works perfectly on wifi

    iphone 6 always hangs/stops working when i turn on my cellular data. i have already switched my sim card. It works perfectly on wifi

    Which of the basic troubleshooting steps described in the User Guide - restart, reset, restore - did you try before posting?

  • My note 3 S Voice stop working when the screen is black

    My note 3 S Voice stop working when the screen is black

        mr1bunny,
    Sorry to hear that you have had trouble with the S Voice app. When did the trouble begin? Any recent changes to the phone that correspond with it working when the screen is black? Go to the S Voice application -> Menu -> Settings -> Is the "Voice wake-up" turned on?
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • Tecra S5 - Fingerprint logon stopped working when I chanaged password

    I have a Toshiba Tecra S5 notebook and I've been using fingerprint logon since the beginning.
    It stopped working when I chanaged my password.
    Fingerprints are associated with the old password.
    I have looked all over to find where to change that without success.
    Anybody can point me in a right direction?
    Thanx

    Hi
    I think you should remove the old fingerprints and should configure this again.
    As far as I know you can use the new password to login.
    Then access the Trusuite software settings, remove the old fingerprints and reconfigure it again using new scanned fingerprints.
    Theoretically this should work.

Maybe you are looking for