Guide me please

HI All,
I have 2 yrs of exp in which 10 months in Insurance company and 14 months as Fund Accountant (Hedge Funds). I have recently put down my papers in order to get trained and certified as SAP FI consultant. I'm planning to join Genovate next month for full time training. I have Master degree in Finance from the UK University.
Please let me know if my previous exp will be counted? Howz the demand for SAP FI consultant in the market? Do companies still recruit freshers in SAP?
Looking forward for your honest advice.
Thanks,
Ravi

If your Finance basics are strong from your "Masters" course and pay proper attention for the 30 days in your training + certificaiton program, then it won't be a problem getting a job as an FI consultant.
But yes, don't mug up things in the training.
And yes, 55% is the passing for FI.
All the best!
-Zub

Similar Messages

I forget passcode guided access please help?

i forget passcode guided access please help?

Hello alimoshkforoush,
It sounds like you forgot the password for the Guided Access session. Try resetting your iPhone:
Reset
You should reset your device as a last resort and only if you can’t restart it.
To reset, press and hold both the Sleep.Wake and Home buttons for at least 10 seconds, until you see the Apple logo
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
Thank you for using Apple Support Communities.
Best,
Sheila M.

Guide me please in sap abap hr and in sap hr. have 1 year exp did get job wht to do ?

Dear Friends ,
I Have 1 year exp as an Associate SAP ABAP HR Consultant and i have done MCA but still did get any job i am free from 3 months did get any call please guide me what to do my abap is not much strong but hr is good . i am so upset tht planing to move in other job profile like SEO or work as HR executive for getting domain knowledge.so plz guide me wht to do .
thanks
Regards,
Vikrant

Hi Vikrant,
Since you are more interested towards HR than ABAP, in long term you can think of moving into SAP HCM functional career. And to be able to work as a functional consultant, you need to have good amount of business process knowledge. Considering this you can start working in core HR and gain domain experience and move your career later towards functional area.
And more over you have ABAP HR experience,this will be very handy when you are a functional consultant.
Regards,
Ravi

Trouble opening ipod users guide. PLEASE HELP.

ive spent my entire christmas trying to find information for using my ipod nano. i am aware of the users guide but when i open it it does NOTHING. when i downloaded the guide after it had finished when i opened the file, it had originaly said i needed to pick a program to run the guide, so i chose itunes?..after that didnt work i tried opening it using internet explorer, microsoft word, notepad...everything!..nothing is working for me. im so confused. please please help me before i throw this nano AND my p.c..at my wall.
much appreciated.

If you are talking about the itunes user guide then it should open with the itunes itself. Else if you are reffering to Ipod features guide which is a PDF file you can open it simply by Adobe acrobat reader. If you dont have it then you can download it from www.adobe.com

HP Pavilion laptop - user guide required please

User guide required please

Hi:
What is the full model number of your notebook?
If you do not know, please use this guide to figure that out...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00033108&lc=en&cc=us&dlc=en

I recently decided to have my e-mail go to BT mail, but after using it I would prefer to go back and use "mail" from dashboard. Not being an expert of any degree, could someone help guide me please? Regards

Recently moved e-mail to BT. Would now like to revert to "mail" from dashboard. I'm not sure of steps I need to take, can anyone guide me through it please? Thanks

An Alias would be an email address that is delivered to a different account's inbox.
For instance if you have [email protected] and have [email protected] Then [email protected] would be an alias if mails from that address arrive at the icloud address.
If you want to add a completely different account, with a spearate inbox, like an account in hotmail and one in say yahoo mail. Then as has been pointed out, you need to go into the Settings Icon, Tap on Mail, Contacts, Calendars, and then on add account. The iPad has several services preconfigured, you can tap on one of those from the list to setup an email for that service. Such as Hotmail, Gmail etc...
Or you can tap on other to add a personal pop3 or imap type email like from your office, or your school.

Dreamweaver to CF Builder Transition Guide. Please!

It would be extremely helpful if someone would release some sort of documentation to help us long-time Dreamweaver users transition to CF Builder. From what I've been reading there are LOTS of coders/developers who claim to hate CF Builder already. A good many citing the learning curve as the reason. I'm trying hard to be open minded about it but if the learning curve is too steep, I'll divert back to Dreamweaver. These days you have to stay productive to stay in business.
After just a few minutes, I saw some features in CF Builder 3 that got me excited. Unfortunately I got so frustrated over the fact that it took me almost an hour to figure out how to FTP a file to the server that I'm ready to uninstall it. Setting up the FTP server connection was very straight forward but it took a while to figure out how to tie the FTP server connection to the project and actually upload a file. I like the DW method for defining remote servers and the cmd+shift+u to upload a file. In CF Builder it takes something like 3 clicks to upload a file after everything else is setup. That's core functionality and shouldn't be buried that deep in my opinion.
Like I said, some sort of "transition guide" may help Adobe sell this to those of us not currently using Eclipse. For what it's worth, it's those same setup/configuration/learning curve issues that caused me to dump Flex Builder and give up on the whole Flex platform even though I see huge potential there.

It would be extremely helpful if someone would release some sort of documentation to help us long-time Dreamweaver users transition to CF Builder. From what I've been reading there are LOTS of coders/developers who claim to hate CF Builder already. A good many citing the learning curve as the reason. I'm trying hard to be open minded about it but if the learning curve is too steep, I'll divert back to Dreamweaver. These days you have to stay productive to stay in business.
After just a few minutes, I saw some features in CF Builder 3 that got me excited. Unfortunately I got so frustrated over the fact that it took me almost an hour to figure out how to FTP a file to the server that I'm ready to uninstall it. Setting up the FTP server connection was very straight forward but it took a while to figure out how to tie the FTP server connection to the project and actually upload a file. I like the DW method for defining remote servers and the cmd+shift+u to upload a file. In CF Builder it takes something like 3 clicks to upload a file after everything else is setup. That's core functionality and shouldn't be buried that deep in my opinion.
Like I said, some sort of "transition guide" may help Adobe sell this to those of us not currently using Eclipse. For what it's worth, it's those same setup/configuration/learning curve issues that caused me to dump Flex Builder and give up on the whole Flex platform even though I see huge potential there.

I need to reinstall the latest Pro X version (10.5 etc), but cannot find it. Can you guide me, please?

Hello! I recieved notification for a Logic Pro X, newest update and installed it. It's not working very well and I would like to reinstall it. However, I can't find the update to reinstall. Can anybody please point me in the right direction?
Thanks, Happy New Year!
Ronny Bee

It will be in the Purchases tab of the Mac App Store Application so lomg as you are sigtned in using the same Apple ID you used to purchase LPX in the first place. The version will be 10.0.5

Can anyone guide me please (jhe)

I need to write a set of Jsps as following:
1.A common Jsp that should have the database connection program.This jsp should be called in all other Jsps whenever a database connection is needed.
2.The Connection should not be hardcoded that is say for example I have a connection string as follows
Class.forName("com.mysql.jdbc.Driver");
Connection con = DriverManager.getConnection("jdbc:mysql://192.168.2.123:3307/ramesh" , root", "root");
Statement st= con.createStatement();
I want to pass the ip address and the port number as dynamic values rather than a static value as shown above .
3.I want to design another page so that the page acts as security page which checks for login username and password and authenticates the user to see the pages based on Login.
R.Ramesh.

It is not recommended way, try to learn MVC & DAO design patterns.
as for as readiing IP dynamically, you can use properties file and read it from Action./Servlet class.
use DAO for creating database connection and other methods, its plain java object nothing to scare about and invoke that from your Servlet/Action class.
Submit your JSP to a Servlet and perform login validation using DAO class, after that you can forward ( using RequestDispatcher) to a JSP page of your choice
Its easy.

Noka 1662 - Can U Guide Me Please?

Hello
i am an old user of Nokia 1662 -
I am Plaining To Buy New Set Of Nokia May Be The Same - But Problem Is This I Am Having Alot Of Important Message In My Nokia 1662 - How Can I Move My Message From Nokia 1662 To Other ??
I Checked there is no option even to move messages from phone to sim or sim to phone
Can U Plz Help Me In It
Thanks

@farby: Isn't he asking if it's possible to copy messages to the sim memory or in some other way?

New Program Guide - unusable

I want to be tactful about this - what would be the best way to characterize your new program guide - Sick Joke? In what sense is it an improvement over the previous one? It is in fact immeasurably WORSE. How could anyone at Verizon have signed off on this?
The biggest problem is that it is now unacceptably, absurdly, SLOW. Was that the intention? I asked Verizon Phone Tech support if they slowed it down intentionally , because maybe the network traffic volume was too costly for Verizon and they wanted to cut expenses. Amazingly, he did not give a flat denial to this. As I recall he said He didn't have any knowledge that that was the case.
The way it used to work is for example you would hold down the right arrow button, and it would as expected just briskly scroll through all the programming selections for that day for whatever channel you happened to be looking at, scrolling through all subsequent shows on the channel that day. (And also as a recall when scrolling through subsdequent days).
Now you hold down the right arrow button, and it scrolls forward just one show, and then just freezes, doing nothing. If a few seconds later you lift your finger off the right arrow button, it immediately jumps to say 8 hours in advance. This makes this feature unusable. How could you not understand that, Verizon?
The same situation exists when scrolling to different channels with the up or down arrows. Press and hold down the down arrow, and it does in fact scroll through the subsequent channel icons, but it does NOT, as it did with the previous program guide, scroll through all the program DESCRIPTIONS in real time. So why was that feature ditched?
The fastest it can scroll in real time now either left/right or up/down is 1 entire second. So, iow, hit the down arrow, and...one one thousand two ...OK NOW it switches. What is up with that?
For the record, this is not the high-def Verizon box. The TV on the high-def box seem to work a little better. Does Verizon only support high-def now?
And I haven't even mentioned the bizarre color scheme and other bizarre design decisions for the new Program Guide layout. So, how is it better to reduce the size on the screen where the actual program info is, and surround it with a a lot of unused white space (or shoud I say unused sickly pale blue space)? Just as far as the aesthetics of the new guide, there is not a single aspect of it that is not drastically worse than it was previously. (e.g.hitting the info button during a show and it covering a third of the screen.)
But disregard the complaints about the colors, etc. - just go wild with that if you want. Just please restore the SPEED of the programming guide to what it was previously. Because the way it is now its unusable.
Is there any way to go back to the old guide? There is in fact an option in the Menu for the Classic Guide, but it does not do anything except rearrange the new guide a little bit to make it even worse.
What is going on with you people (Verizon).

I'm sorry to hear your frustration with the new guide. There is no way to go back to the old style guide. If unplugging the power cord to the box and plugging it in doesn't speed up the guide maneuvering, please send me a private message.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Getting Runtime error while including pdf doc with Form guides.

Hi,
I have urgent requirement where I have to capture the data in the PDF doc   what user enters into the form Guides.
I am trying this on ES2.
I followed the steps what they mentioned at :: http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm - >>Creating Guides using LiveCycle Workbench ES2 -> Including the PDF doc with a document.
They mentioned that we have to create form design (pdf) with same data model.. But When i tries to create form design by including the data model .. it is not allowing to me save as pdf and its telling that we have to save as xdp only.   So saved as xdp only and followd all the same steps what they mentioned .. but we are getting error like :::
2010-01-07 17:13:08,227 ERROR [com.adobe.idp.workflow.dsc.invoker.WorkflowDSCInvoker] An exception was thrown with name com.adobe.repository.ResourceNotFoundException message: ALC-REP-018-000: Resource
[/Form/SampleFormGuides/1.0/Form/MyInformation.xdp] does not exist or you do not have sufficient rights to access it. while invoking service RepositoryService and operation readResourceContent and no fault routes were found to be configured.
Please find my form guide setting to invoke my REST URL.. and my process.
please help me in this regard ,,,,,

Hi Han,
The problem might be in path of the resources. Please check the path for the pdf you includes at form guide.
Please check concat( ) operation .. make sure that it is correct and pointing as per your work bench.
And
At Configuring the REST endpoint for the PDF render service:,   6th point , please select   as System level rather than INVOKE_PERM.
I hope it helps.
Thanks
Praveen.

What's The Point Of Having DVRS If The Guide Is Incorrect?

As the holiday season is upon us with a new year right around the corner verizon's guide issues still continue to get worse and worse with each day that passes with no end in sight as to verizon actually making an effort to correct the guide issues that currently exist. The schedules that verizon has running on their channels are so far off that it must be some sort of a sick inside joke to see how much the customers will take before they decide to go elsewhere for their services because of the reluctance to want to assist customers with all of the data that is wrong on the guide. If you want something corrected you are on your own since tickets that get created do not get worked on or looked at by the people who can make the necessary corrections. Now while i have been in touch with your guide provider and many of the channels on the guide to get things corrected (which i should not have to do) things have been getting fixed little by little but the frustrating thing is that even after i get them corrected for everyone who has fios for their tv service two weeks later it reverts back to being the same issues all over again. Very few people know that i have been doing this but if there is anyone at verizon who can actually assist with this issue then please do so because there are a lot of people who are having the same issues nationwide who are at the point where they are going to drop you if you do not fix the guide issues. I would be embarrassed to know if it were my company that was incapable of providing something that people are paying for and that the customers have to do my job for me rather than those who are being paid to do it so if you can assist those of us who have these guide issues please do so or at least give people a reason as to why you are not doing so rather than saying that it is a known issue. It being a known issue and a company doing nothing about it is truly disturbing because then the perception will be that apathy is the reason for not wanting to correct the guide problems.

Have you voted here. Get rid of FYI and what ever additional provider adds data. What good is all the additional info, if it is all wrong. Nice guide bad data.
http://forums.verizon.com/t5/Share-Your-Ideas-with-Verizon/Switch-to-Tribune-Media-Service/idi-p/378...
OK mm1, I see you had voted.

Webdynpro Component in Guided Procedures

Hi Experts,
I am very new to guided procedures, please help me out.
Scenario: One Webdynpro Component with few input fields and btn, btn action saves the data in custom db tables. But, i need to mail the filled form to some approver and from there, if the form is approved then save to db else reply with unapproved form.
Please can anybdy tell me, hw i will b able to do all this using guided procedure.
I found some queries and tutorials, also i followed the same steps..bt while creating a new webdynpro object in process action. After selecting my comp from server, it dint shwed up those input field parameters in parameter tab of object or newhere...y so??? Are there any settings to b done??
Also, while assgning roles, its bit complicated,...can anybdy explain me that part???
Thank You So Much Experts,
Runal

Hi,
I think, you can resolve your issues by going throuh these links
[link1|http://help.sap.com/saphelp_nwce10/helpdata/en/43/34be0d89f01bcce10000000a1553f7/content.htm]
[link2|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00c07d0-61e0-2a10-d589-d7bc9894b02a]
[link3|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b99341-60e0-2a10-6e80-b6e9f58e3654]
Sampath
Edited by: Sampath Gunda on Jun 6, 2008 2:35 PM

A how-To guide about splitting import files exists?

Hi All,
in his Webinar https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/409e4529-adbc-2a10-4d9b-e8fade570414
Klaus David said a "A how-To guide about splitting import files exists" (Page 20).
Can anybody tell me where to find this guide?
Please mail to becker.roman ( at ) web . de
Best regards
Roman

I found the link here, if you are still looking.
I didnot check the contents yet but the title says
MDM 5.5 SP06 - IT Scenario Configuration Guide -
https://websmp202.sap-ag.de/~sapidb/011000358700001119482007E
Thanks
Satya

Guide me please

Similar Messages

Maybe you are looking for