Guide to configure the UCM so i can start from browser

Please provide me the configuration detail for configuring the UCM server can start or stop from admin server tab( like as in 10gr3).
Now we have an upgraded our ucm server from 10gr3 to 11g, But in 11g we need system access to start the ucm but we not want to give system level access to user.
So please some one guide me for configuring the UCM server for start and stop from browser.

- So please some one guide me for configuring the UCM server for start and stop from browser.
-- You can start it from browser - from weblogic admin console and/or Enterprise Manager. Note that there are some prerequisites (e.g. UCM must be defined as a managed server, you will need to start the WLS admin server, etc.) I'd also recommend you to get some weblogic server administration basics to be able to perform these tasks.
Jiri is correct. You have to define UCM (or UCMs, if you are in a clustered environment) as a managed server. I think it's the default option in installation.
The steps you could do are:
1 - Start the WLS Admin by console and access it in http://yourserveripaddress:7001/console.
2 - In the "Environment" tab, in the lef side, you have the "Servers" option , click it
3 - Now you can see all the servers you have installed, click in the "Control" tab
4 - Check the servers you want to start and click "Start"
5 - Click on the "Update" icon to see the current status of the server.
6 - If the status changes to "Running" the server is up.
I think it's all.
Fernando

Similar Messages

How do you configure the DAM so it can be shared across multiple CQ instances?

How do you configure the DAM so it can be shared across multiple CQ instances?

You can use shared datastore http://dev.day.com/content/kb/home/Crx/CrxSystemAdministration/HowToCombineTheDatastoreToP reserveDiskSpace.html multiple CQ instance will use same file system to share asset
clustering http://dev.day.com/docs/en/crx/current/administering/cluster.html multiple node will share repository.
But you can not have something like one DAM and then have different CQ instance pointing to it (As not everything goes in to one location in file system)
Yogesh

I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?

I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?

It is not necessary to delete your old wireless networks first, but doing so may eliminate confusion. If you wish to do that, open System Preferences > Network, and select Wi-Fi from the left column. Click the Advanced... button, then select your old wireless networks and delete them with the "–" (minus) button. Make sure the "Remember networks this computer has joined" remains checked.
OK then Apply.
This prevents your Mac from searching for your previous network which will no longer exist.
A new Express creates an open wireless network that you must select before you can configure it. It appears in your Wi-Fi menu like this:
Select it. AirPort Utility will load and walk you through its configuration.
Edit: If you are really using OS X 10.5.1 as shown in your profile, the above screenshot is not applicable. Instead, select the network called "Apple network nnnnnn" and then launch AirPort Utility.

What do i need to connect my mac book pro to the tv with the thunderbolt on the mac to hdmi? I have the newest macbook pro. I'm wanting to have the best picture I can get from my 1080p tv. thanks

what do i need to connect my mac book pro to the tv with the mac's thunderbolt port to hdmi? I have the newest macbook pro. I'm wanting to have the best picture I can get from my 1080p tv. thanks

Thanks Community! I solved the problem. In fact it was not a problem but lack of understanding. These guys at Apple are way ahead in thir thinking. I will try to explain as short as I can.
In Lion, ihe Prefferences/Display show only two choices: 6-7 steps of resolution and some color tab. No two screens, no two display to overlap, nothing for us to do. "That was the problem"! Everything is automatic.
When I connected the HDMI cable to the Miniport into a T-bolt slot, the TV screen showed the "spiral galaxy" how Zyriab is calling it. In fact he gave me the best clue. That shows the connection is good. But where is the Mac Book image?
You have to drag it to the right out of the Mac Book display area, and "voila!" it will continue on the TV screen. The same with the mouse pointer, push it out ofthe Mac Book display area and you see it on the TV sreen. Good image, you can keep the max resolution, etc. The sound is still on the Book's speakers. I have to figure that out.
Thank everybody, especialy Zyriab, ne was the closest.
High regards to everybody

When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?

When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks

sandrafromsilver spring wrote:
When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks
Go to the following link:
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/

Why U. S. Store refuses my Visa card with it's official and with the global science I can buy from Bahrain store and now my account stoped with reason owe ..

Why U. S. Store refuses my Visa card with it's official and with the global science I can buy from Bahrain store and now my account stoped with reason owe ..

You can ONLY use the itunes store of your country of residence ( proven by the billing address on your credit card) AND ONLY while you are physically located inside the borders of that country.
You would have to live in the U.S and physically be located in the U.S in order ot use the U.S tunes store. The same is true for each countrys itunes store.

13" late 2011 MacBook Pro has frozen after Yosemite installation. I can, however, boot from a clone of my MacBook Air that is on an external drive. Despite the fact that I can boot from the external, could it be the RAM that's the prob

My daughter's 13" late 2011 MacBook Pro has frozen (null sign displays) after Yosemite installation. I can, however, boot from a clone of my MacBook Air that is on an external drive. I reinstalled Yosemite on the MBP HD, but it still hangs in mid install. Despite the fact that I can boot from the external, could it be the RAM that's the problem? I'd happily put 8 GB in if it seems probable that would solve the problem. I've tried all the suggested procedures that I've seen posted here. Disk Utility, and my older version of DiskWarrior indicate the HD is OK. I have DiskWarrior 5 on order.

Boot the MBP with the OPTION key down. If successful, you should see two HDD icons, Select the recovery partition (on the right).
From the 4 option menu select Disk Utility.
Run Disk Utility>First Aid, Verify and Repair.
If the disk cannot be repaired, it will have to be replaced.
Ciao.

I am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

i am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

I believe there is no "Export to Tape" feature as appeared in legacy FCP.
SORRY! Just noticed you are using FCP 6.
You need to ask this question in the Final Cut Studio forum.
Message was edited by: Ian R. Brown

At times I will close my firefox browser When I go back to open my browser I get a message stating that firefox is running The only way I can get my browser open is to restart my computer Why

At times I will close my firefox browser When I go back to open my browser I get a message stating that firefox is running The only way I can get my browser open is to restart my computer Why

Sounds like Firefox is "hanging at exit". That problem is frequently caused by an Extension or a Plugin. Read all of the following articles.<br /><br />
NOTE: Establish a habit of exiting/closing Firefox with Firefox button > Exit or File > Exit to allow an orderly shutdown of Firefox and closing of all of the files that Firefox has open.
#Stop the Firefox process:
#*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
#*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
#*Mac users: http://techheavy.com/2011/02/the-mac-task-manager/
#Why Firefox may hang:
#*[http://support.mozilla.org/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
#*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
#*[https://support.mozilla.org/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably an Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*'''''Adobe Shockwave for Director Netscape plug-in''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

I DON'T SEE FIREFOX ICONS OR FOLDER IN START MENU, DESK TOP OR TASK BAR. HOW CAN I INSTALL THOSE? OR WHERE I CAN START FIREFOX BROWSER?

I DON'T SEE FIREFOX ICONS OR FOLDER IN START MENU, DESK TOP OR TASK BAR. HOW CAN I INSTALL THOSE? OR WHERE I CAN START FIREFOX BROWSER?
How can I start or open Firefox?

HI SBPARK,
When you installed Firefox, did you uncheck the option to create a short cut?
In order to pin to the toolbar, when you have Firefox open, right click on the icon in the bar and select "Pin to task bar".

I just bought a new Macbook Pro and transferred my iTunes archive of music to it. How do I transfer the playlists from my other computer(s)? iTunes on the new machine wants to start from scratch.

How do I transfer playlists from my other Apple computer(s) to my new Macbook Pro? I think I have successfully moved the music (archive) but the new machine wants to start from scratch on the playlists.

http://support.apple.com/kb/ht1751
Essentially you need to copy over the itunes folder
username/Music/itunes
Over to your macbookpro I suggest using an ethernet cable as it is way quicker. Put it in the same spot on the new Macbook Pro
username/music/
This should bring over the playlists etc. Then just put the music back in from the archive

Field Guide 8 - Configuring the Database but problems with user id

Iam just running into problem after problem with Chapter 8 dataproviders when I'am about 2/3 of the way through.
I'am now trying to configure the "Login Data Structure" Page 363. After adding the derbyclient.jar file. Then opening DerbyLogin.java and thereafter clicking "Run" as instructed in the book I get this error.
Error on url jdbc:derby://localhost:21527/sample
ERROR: SQLException: Connection authorization failure occurred. Reason: userid invalid.
org.apache.derby.client.am.SqlException: Connection authorization failure occurred. Reason: userid invalid.
at org.apache.derby.client.net.NetConnection.mapSecchkcd(Unknown Source)
at org.apache.derby.client.net.NetConnection.securityCheckComplete(Unknown Source)
at org.apache.derby.client.net.NetConnectionReply.parseSECCHKRM(Unknown Source)
at org.apache.derby.client.net.NetConnectionReply.parseSECCHKreply(Unknown Source)
at org.apache.derby.client.net.NetConnectionReply.readSecurityCheck(Unknown Source)
at org.apache.derby.client.net.NetConnection.readSecurityCheckAndAccessRdb(Unknown Source)
at org.apache.derby.client.net.NetConnection.flowSecurityCheckAndAccessRdb(Unknown Source)
at org.apache.derby.client.net.NetConnection.flowUSRIDONLconnect(Unknown Source)
at org.apache.derby.client.net.NetConnection.flowConnect(Unknown Source)
at org.apache.derby.client.net.NetConnection.<init>(Unknown Source)
at org.apache.derby.jdbc.ClientDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:193)
at asg.databuild.DerbyLoginDB.createLoginDatabase(DerbyLoginDB.java:52)
at asg.databuild.DerbyLoginDB.<init>(DerbyLoginDB.java:38)
at asg.databuild.DerbyLoginDB.main(DerbyLoginDB.java:25)
BUILD SUCCESSFUL (total time: 5 seconds)
It's telling me that user ID is invalid. I have no idea what my db user id is or how I can check it with the bundled database as there is no documentation I have found about that. Nor do I even know what I have to do to properly configure this app to properly work with the bundled database as the field guide says absolutely nothing about this!Message was edited by:
tutorials

Found a solution to this problem for anyone else having the same problem please go to thread: http://forum.sun.com/jive/thread.jspa?forumID=123&threadID=99634

Guide for configuring the Claims module for India Payroll

Hi all,
I am configuring the Claims module for India Payroll.
Can anyone please help me with a step by step guide.
Currently I have maitained a few types of claims under spro->Payroll->India Payroll -> ESS->Advance Claims->Reimbursement Types->Maintain Attributes of Reimbursement Types.
But when I try to submit any claim request from portal, its giving the error "Employee number not maintained for : 00005007".
It would be helful if anyone can provide help regarding activating the claims workflow (WS18900023) as well.
Thanks in advance,
Sattam.

Hi Praveen,
Thanks a lot for ur reply. I have done those configurations, still I will check again.
I have identified another error. When I try to add a start event to the worlfow WS18900023, and activate it.....its giving the error "BUS1009 cannot be executed" .
Is this the cause of malfunction? If yes how to solve it?
Pls Help
Sattam.

How to configure the Reference Field of BKPF-AWKEY from FI Doc MIRO?

Hi All
From my testing, I found out that this field (BKPF-AWKEY) is used to store doc reference of the docs, where this transaction was actually originated.
In case of MIRO, BKPF-AWKEY = MM inv doc no + MM inv year.
I know where to find the path to define AWKEY for BKPF in SPRO. However, I am more interested to know the path as of what combination to put in for this field for the configuration.
Thanks.

Hi,
You cannot configure the logic for this field; it's hardcoded in the core processes.
Regards,
Eli

Analyzer 6.5 can start from port 9080, but can't start with out port definition

Hi,I have installed the Analyzer 6.5.0 under the WebSphere applicatiion server 5.0 Advanced Edition.I have litle problem. Everything works if I run Analyzer from browsers URL: http://localhost:9080/Analyzer6_Server/but if I try to run Analyzer from brouwsers URL (without port 9080):http://localhost/Analyzer6_Server/it reports the error:"load: class com.hyperion.analyzer.usersession_base.AnalyzerClient not found"How to start Analyzer from URL http://localhost/Analyzer6_Server/Any help would be appriciated.Thanks,Grofaty

Hi,In Analyzer I have changed the 'localhost' to IP_address.From: <param name = ServerURL value ="http://localhost/Analyzer6_Server/Dispatcher">ServerURL = "http://localhost/Analyzer6_Server/Dispatcher"I have changed to:<param name = ServerURL value ="http://ip_address/Analyzer6_Server/Dispatcher">ServerURL = "http://ip_address/Analyzer6_Server/Dispatcher"Then I wrote the http://ip_address/Analyzer6_Server/index.html in browser and clicked the "Java Web Client" link.The problem remains! The same error!Any idea?Thanks,Grofaty

Guide to configure the UCM so i can start from browser

Similar Messages

Maybe you are looking for