Guided edits not visible in PSE 13

Hi,
I recently purchased and installed PSE 13 on my laptop running Windows 8...the guided edits appearing in the right hand panel under the guided tab, do not show up. Once it happened, I reinstalled PSE 13, but now the problem has occurred again....any solutions?

HI Nikita,
tried that already....not working....have reinstalled once again. Will let you know if the problem occurs again....
thanks

Similar Messages

(Harmful) edit not visible in WkiHistory in "Feature Requests"

Maybe this should be a discussion.
I've just removed a porn link from the Forums table in "Feature Requests for..."
The disturbing part is that the edit I removed first appeared in Rev.233, but was not visible in the WikiHistory. I can construct a lot of scenarios here (but I won't!) and all of them are scary. I cannot construct a scenario with a "harmless"
rating.
I'm only a newbie, it's not for me to take this further. But I am sufficiently experienced to know that a revision of best practise access control should be undertaken. Yesterday would be a good time to initiate it.
Gordon.

Hi Richard -
Thanks for answering. It's the comment to the edit that's missing.
I believe (I have not tested) that blank comments are not listed as part of the edit, so all we get is the user's edit listing, but no clue of what was done in the edit.
I draw your attention to Wikipedia, where all parts of the edit are summarized in the History List. I don't believe the Technet Wiki History needs that amount of data, but OTOH that is the sort of thing computers excel at. But I do believe Technet
Wiki should record blank comments as well as filled comments. Maybe a blank comment could be filled with the first 10 or 20 words of the edit?
Gordon.
Okay, please add the feature request to the Wiki section:
http://social.technet.microsoft.com/wiki/contents/articles/4703.feature-requests-for-technet-and-msdn-profiles-and-social-platform-tools.aspx#TechNet_Wiki
Hey, thanks for your edits here:
http://social.technet.microsoft.com/wiki/contents/articles/4703.feature-requests-for-technet-and-msdn-profiles-and-social-platform-tools/compare.aspx?revB=0&revA=234
You removed a dead link and a spam link!
And the history tab showed me all that!
We're actually thinking of migrating to the Wikimedia platform. Then that would give us your feature request. But it's best to capture it on our list so we don't lose sight of it.
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Guided Edit conflicts w/ Extractions PSE 10

I've been working on two things: putting people on new backgrounds and improving the looks of those same people using Guided Edit's Perfect Portrait. As soon as I click on Apply Smart Blur, garbage appears in areas I had removed. This picture is one example of what I'm getting: Its discouraging! I've tried doing the Guided Edit first but when I do, I loose all of the changes when I separate the image from the background. I'm using a PC with Windows 7, and PSE 10. Janet

I've tried doing the Guided Edit first but when I do, I loose all of the changes when I separate the image from the background
Does it happen if you flatten after running the guided edit?

Activity Guide tab not visible in BPM Workspace

I've deployed a simple BPM Process which consists of one Initiator and one User task. I've added both the activities to a milestone what I defined under the Activity Guide.
I've used JDeveloper 11.1.1.4.0 to develope the Process.
But after deploying the same in Server, I can't see the "Activity Guide" tab in the BPM Workspace.
Thogh I can see the activity guide available for editing in composer portal.
Please help me if you know how can I get the "Activity Guide" tab in the BPM Workspace?
Thanks in advance.
Sambit

Hi Paulo,
Thanks a lot for your reply.
I kind of assumed that it's a feature of BPM 11.1.1.5 FP4 after going through a few articles on the web.
But I got confused when after visiting below provided url :
http://www.oracle.com/technetwork/middleware/bpm/learnmore/488809
Please see the statement "*In earlier releases, to use Activity Guide you had to perform some manual steps to create the Activity Guide Player inside Oracle BPM Suite – BPM Workspace.*" under "Enhancements to Activity Guide within BPM Workspace" section in the document presnt in the above mentioned url.
I couldn't find any manual steps which can bring the Activity Guide Player in the workspace anyways and your reply confirms that.
Thanks,
Sambit

Photo edits not visible in finder

Although I have ticked "automatically write changes into xmp" I cannot see any of my edits if I see or open my photos through the file manager.
Why can't I see my changes?
Please note that I'm still using a trial version. Could that have something to do with it?

The trial is a fully working program, just with a deadline of 30 days.
The images are left untouched, until you export. Your edits are saved in the LR database as well as in the XMP sidecar if selected as you did. To see the changes the edits need to be applied to the images. This can be done in LR by exporting. Other programs can only show your changes if they can read your edits from the XMP sidecar and apply these to the images. Finder will always show your original images.
You should read some more about the main principles of LR, specially 'Nondestructive Editing'.
http://www.adobe.com/products/photoshoplightroom/about/

Shape layers not visible in PSE 8

I am making flyers tonight and I have noticed that I can't keep shape layers visible at all times.
I am creating flyers to hang on boards for people to pull off my phone number. Therefore I want to have lines indicating where I should cut and how far. However, I can't keep these lines visible unless I am selcting the layer. I read an answer to a similar question and they answered that they should chose a different foreground color from the background color. I already have a white background and black foreground color yet still i can't see the layer.
any ideas?
thanks many times.

Thanks for the tip, Garry.
However, readjusting the layer visibility also did not make any difference. For the purpose of printing all visible, I created all shapes on one layer and clicked on it while printing so I can see everything. Really, no idea why nothing worked.
cheers,
D.

PSE 11 Guided Edit will not initialize

I've installed PSE 11 on my iMac running OS 10.7.5. Guided edit hangs after initializing about 75% when I try to run it from my main user (administrator) account. It works fine from a second user account. Does anyone have any ideas about getting it to run from my main account? That's where all my photos and other data is. I tried a re-install, and that didn't help.

Well, it took me two days to find where you put this. So far the adobe system just seems to be delighting in setting up mazes and hoops for its users when they have questions. I'm just looking for some help with my problem.

Guided Edit (Right hand side panel not visible

The Guided Edit, the right side panel of editing choices is not showing on my Mac.
I have tried uninstall and then re-install, but still have the same problem.
Any help ??

How did you uninstall it?

Edit pane not visible in portfolio

Hi-
I am new to Adobe 9. When I am trying to create a new PDF Portfolio, the edit pane is not visible on the right hand side (so that I can set colors, headers, footers, etc.).
I have searched through the documentation and can find no reference of how to make this pane visible.
What am I missing?
Thanks.

I understand that - I am referring to the Adobe Portfolio in Acrobat - where you can create a single pdf with multiple pdfs, flash, audio, video, Excel spreadsheets, Word documents, etc.
The documentation (and other training resources) clearly show an 'edit panel' on the right side of the Portfolio creation window when a new portfolio is initiated. Mine does not show this pane and I can't figure out how to make it appear.
See the attached screen shot of what I am pulling from the documentation. The capture picture is what I am pulling from the documentation. You will see on the right hand side of this screen it says 'Edit Portfolio'. That is the pane I am missing, as you can see from the screen shot of my window, in Capture2.
Thanks for any assistance.

SP 2010 Publishing - Rollup and Page Images not visible when entering page edit mode

All:
Hello, I have an odd issue recently appearing after installation of FEB 2013 CU install. When users select to Edit a Publishing Page the Rollup Image and also Page Image(Article Page Layout) are not visible. Only the "Click here to insert Image from
SharePoint" link is visible.
The issue has be confirmed in 5 servers across two farms
DEV, QA, and PROD on client recently updated
DEV and PROD in a completely separate client farm
I have confirmed the issue does not exist in two separate farms running April 2012 CU. In both of those environments the image appears with issue even in Edit page mode.
In the farms where the issue exists you can click the insert image link and simply hit OK to see the image again. An easy enough work around for tech savvy but my client's content admins are very confused/frustrated by.
Is this a bug? I have confirmed in two separate farms including brand new web applications using out of the box publishing site templates.

Hi.
We have been facing the same issue in a 2013-environment (SP1), but in this case an upgraded 2010 Solution, which still runs in 2010-mode. Because of this, SharePoint still use resource-files in the 14-hive (as we have not performed an upgrade of Master
Pages etc.) The problem is also reproduced on a clean 2010 Site Collection in the same 2013-environment.
I have managed to find the cause of the problem (at least in our environment), and that is that as long as the selected picture/image has
not defined an "AltText"/"Alternate Text" the problem seems to occur.
In other words, try to define an Alternate Text and click OK in the "Edit Image Properties" Dialog.
I don't know if this may be the case for everyone else, but give it a try.
From this, I've further discovered (after hours of js-debugging) that there is a minor change (from 2010 to 2013) in a js-file called "SelectorControls.js" which is responsible for updating the various controls used in Page Layouts etc.
The problem exist in a method called ASO_UpdateButtonsAndPanels(), which checks whether the Image Control in question has content or not (Url). The local variable "hasContent" is then determined of an if statement, if(this.AssetData.ManageLinkDisplayText)
which in 2010 (14-hive) seems to be "true" regardless whether the Control is of type Image or Hyperlink. Further the code checks for AssetText (Alternate Text) which on an Image may be left empty.
In 2013 (15-hive) however, this if statement has been changed to, if(this.SelectorType==ConstLinkSelectorType), which clearly states "Image" or "Link" depending on the type of control.
I don't know if this is the cause of the problem in 2013, but in 2010 it seems to be exactly that.
Pending a solution from Microsoft, we have modified SelectorControls.js to overcome this issue until the customer decides to do a Visual Upgrade to 2013.
This is by all means not a supported nor a a permanent solution to the problem, as future Hotfixes, Service Pack etc. may "reset" our fix.
Below is a copy of the working solution:
function ASO_UpdateButtonsAndPanels()
{ULSuBa:;
var hasContent=!!this.AssetData.AssetUrl;
//SharePoint 2010: ManageLinkDisplayText is always "True"
//var hasContent=!!this.AssetData.AssetUrl;
//if(this.AssetData.ManageLinkDisplayText)
//hasContent=hasContent && !!this.AssetData.AssetText;
//SharePoint 2013
//var a=!!this.AssetData.AssetUrl;
//if(this.SelectorType==ConstLinkSelectorType) a = a && !!this.AssetData.AssetText;
//Fix for preventing existing selected image to disappear when saving page and/or editing a page with existing image.
if(this.SelectorType!=ConstImageSelectorType)
if(this.AssetData.ManageLinkDisplayText)
hasContent=hasContent && !!this.AssetData.AssetText;
if( hasContent )
if (this.ClearAssetButton !=null)
this.ClearAssetButton.EnableButton();
this.GetAssetSelectedPanel().style.display="inline";
this.GetEmptyPanel().style.display="none";
else
if (this.ClearAssetButton !=null)
this.ClearAssetButton.DisableButton();
this.GetAssetSelectedPanel().style.display="none";
this.GetEmptyPanel().style.display="inline";
I hope this helps anyone else struggling with the same problem.
Thanks!
Øyvind

Navigation bar not visible in edit mode

Hi,
is there somebody who can help me out of this: in edit mode my navigation bar is not visible, however once the site is uploaded the bar is visible. During edit mode i can only see a big dot which positioned in the navigation bar text box.
I am using the latest version of iweb and OS 10.6.8
looking forward to any good sugestions. Thanks.

That is so unusual. Usually it's the other way around: looks OK in iWeb but not after publication.
Log into another user account on your Mac, launch iWeb, create an new test site and see if the navbar is visible. If it isn't then the application seems to be the culprit and a reinstall of iWeb seems warranted. To do so you'll have to delete the current application and all files with "iWeb" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iWeb from the disk it came on originally and apply all necesary updaters.

EDIT will not open in PSE 10

I am not able to EDIT from the welcome screen. I have been able to in the past, but not for the last 2 days. I can open the Organizer.
Any suggestions?
thank you

THANK YOU!   Can you tell me how to do that?
Robin
Date: Tue, 3 Jan 2012 15:32:29 -0700
From: [email protected]
To: [email protected]
Subject: EDIT will not open in PSE 10
    Re: EDIT will not open in PSE 10
    created by photodrawken in Photoshop Elements - View the full discussion
Bypass the Unwelcome Screen by creating Desktop shortcuts for the Organizer and the Editor. The Editor's executable is:"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe" The Organizer's executable is:"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe" The Unwelcome Screen leaves a zombie process running which prevents the actual program from launching again. Ken
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4116501#4116501
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4116501#4116501. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Field that is not visible in my editing screen but showing in web preview. How to remove it?

Hi Support,
When I preview my form in web preview, I am seeing a field that is not visible in my editing screen. It starts at the left margin of the web preview and runs off the edge of the right side of the page.
The form is also crashing when I attempt 'page view' or 'save as pdf' and I believe this phantom field is the culprit. I have spent considerable time on the form and do not want to recreate from scratch.
Can you please advise how I can make this field visible in the editing section so that I can permanently delete it?
Further information:
I do not have any rules set for any of my fields
I have tried to remove it in Chrome, IE and Firefox
My cache has been cleared today
My plug-ins and flash player are all current versions (updated today and performed a restart)
Thanks,
Kate

Hi Kate,
Could you please share your form with me ([email protected]) so that I can investigate and correct this problem? Instructions on sharing can be found here:
http://forums.adobe.com/docs/DOC-2462
Thanks,
Brian

VST edit screen not visible after a certain number in a session

Hi folks, I have a small strange problem. After I add a certain number of VSTs to a project, I can't see the GUI of the VST anymore. It's there, and working, but I can't edit any parameters because I can't see them anymore. Anyone with this problem and why it happens?
It seems to be worst with new Waves plugins (I have Gold bundle) but it's general with any VST. Strangely, it doesn't happen with DirectX plugins at all.
Lenovo laptop, i5, using firepod.

The main screen is scrollable. The sub screen does not need to be. The box frame has been expanded to allow space for the new objects and the entire new space is visable. Only the objects located in the lower portion of the box are not visible.

Guided Edit Development for PSE 10

I have guided edits that I have written for every version of Photoshop Elements up to Version 6. I am looking to convert these to Photoshop Elements 10 but cannot find any documentation on how to develope Guided Edits for Elements 10. I have approached Adobe in the past about this topic for Photoshop Elements 7, which was the first version to use flash for the Guides, and I was told that documentation did not exist. Is Adobe still not providing 3rd parties with the necessary information to enable them to write their own guided edits, or is the information buried in an sdk somewhere?
regards,
Steve

Going back to Elements 4, Adobe documented the techniques for writing Guided Edits (or in those days How To's) in the full photoshop sdk, then when Elements 5 was released the documentation was not provided (Adobe have changed the internal format of Guided Edits in every version of Elements they have released), so I'm now checking whether or not Elements 10 is in the same situation or whether the documentation is just not supplied at all. I'm in the situation where I have a requirement to write my own guided edits for elements so that I can add techniques that have been presented in magazines that are extremely useful, and build on the features of Elements. If there is no documentation, and hence I cannot write my own guided edits, then Elements is useless to me, and I may as well throw it away and use the equivalent that was supplied with the digital camera I was given as a present. I don't want to throw Elements away, but if Adobe are refusing to provide the facilities I need then I have no choice.

Guided edits not visible in PSE 13

Similar Messages

Maybe you are looking for