Guided Procedures Output Parameter and ABAP Web Dynpro

Hello,
does anybody know a way to use output parameters in Guided Procedures for ABAP web dynpros? It seems that this is only possible for JAVA based web dynpros.
Thank you for your help.
Regards
Ragar
Edited by: Ragar Chaudhary on Feb 19, 2008 4:54 PM

Hi,
the use of WDA with GP is restricted, see the [documentation|http://help.sap.com/saphelp_nw70/helpdata/en/45/c0d14601430039e10000000a11466f/frameset.htm]
Regards, Heidi

Similar Messages

Develop forms using Adobe Forms and ABAP Web Dynpro

Hi,
Could someone help me on how to learn forms development using Adobe Forms and ABAP Web Dynpro? Any suggestion on Tutorials / Books / other helpful hints please?
I have good knowledge of Smart Forms and used these to generate PDF Attachments via emails.
Thanks.
Regards
Keshav

http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/d-f/faq%20on%20interactive%20forms%20based%20on%20adobe%20software.faq

Parameters from abap web dynpro to visual composer

Hello ,
Can we pass output parameters from abap web dynpro to visual composer?
For Example:
ID NUMBER that we got in the application (Abap web...)
and we want to pass it to import parameter of visual composer (start-point)
I know about the mapping(in GP) but how we can see the output parameter of the abap web dynpro in GP-callable object(output parameters).
When we use GP (callable object), we have input/output parameters.
I need to map from abap web dynpro (output) to visual composer (input)
Thank You,
Boaz.

Hi Boaz,
Unfortunately it's one of the GP restrictions that it's not possible to transport parameter values from an ABAP web dynpro UI into the GP context. Vice versa is feasible, i.e. you can use an ABAP web dynpro UI and fill it with parameter values from GP context.
Regards,
Jan

ABAP Web Dynpro Guided Procedures integration

Hello,
does anyone know if there is a way for an ABAP Web Dynpro to expose input and output parameters for use in Guided Procedures?
Thanks in advance
Gabor

I have the same problem. I want to integrate an ABAP Web Dynpro in GP, but there is no way to implement an Interface from GP like it is in JAVA. That means you cannot maintain input , output parameters and give a status back to GP. Seems that in ABAP the WD is not integrated in GP.
I went to the relevant developement departement an they gave me the following answer.
In GP you can maintain input parameters for a ABAP Web Dynpro Application manually which will be displayed in the apllication UI URL . Then you need a function module to map the input parameters inside the url to the ABAP Web Dynpro context. Output parameters are not possible in GP with ABAP Web Dynpro. It is also not possible to give back the processing state to GP from your ABAP web Dynpro Application like it is in JAVA. Only the GP framework provides a button to complete this Step manually by the user.
Regards
Rainer

Abap web dynpro and portal events

First off, a little introduction: My name is Martin Kroppen, I am an Abap developer for SAP Netherlands, and I am currently involved in a project for hospitals to built a portal. For this, I have created 2 Abap web-dynpros, and then impemented the views as iviews in an EP. What I want to achieve is that the input view triggers the display view on a second page, and the data is shown for the values in the input view (all in the same browser window).
I am using the portal integration manager for this, with the method for relative navigation.
The navigation is working fine, only problem is that I don't know how to handle the business parameters that I send over.
My questions are:
1. is this the correct way for navigating between abap webdynpro iviews in the portal?
2. what is the correct way to read the business parameters into my context of the second Abap WD application?
I tried the solution that is described below, I could not get it to work correctly.
If you define BUSINESS_PARAMETERS as application parameters in your Web
Dynpro application and the parameter names start with ″APP″, they will
automatically be forwarded to the startup plugs of the Web Dynpro application
provided they are marked as startup parameters. In this case, keep in mind that
the iView/page used as the navigation target must be assigned to the user role.
If it is not, navigation cannot be triggered.
Hope someone can help me
Regards
Martin Kroppen

Hi,
please refer to this link for portal integration
Web Dynpro for ABAP Portal Integration [original link is broken]

Testing ABAP Web dynpro: Error code 403 and for the reason Forbidden

Hi,
We have NW04s Installed and trying to execute a SAP supplied ABAP web dynpro application DEMO_SIMPLE_MAIN. Please see the following error and let us know which service it's talking about? I am familiar with SICF. However in AS7.0( New name for WEB AS ) The transaction is little different.
Thanks
Arunava
However we are getting the following service error
Service cannot be reached
What has happened?
URL http://server.domain.name.com:8001/sap/bc/webdynpro/sap/demo_simple_main call was terminated because the corresponding service is not available.
Note
The termination occurred in system XXX with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:NAME999_XXX_01-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team

Hi,
this was actually some services which needed to be started through SICF. Once I have started the service sap/bc/public ETC.. and the web dynpro started working. Most of the SAP delivered demo apps are working
However for some ABAP web dynpro ( for some application XRPM ) I get some peculiar error. Please see below and if you could think of anything out of these.
I have already checked and found the both HTTP and SMTP services are working fine.
The following error text was processed in the system PXA : Syntax error in program /1BCWDY/56ZRPAZLU25M8S1BKV2T==CP .
The error occurred on the application server fmsap994_PXA_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
Method: CREATE_APPLICATION of program CL_WDR_CLIENT_APPLICATION=====CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP

Access Portal Parameter from within ABAP-Web Dynpro

Hi all,
I have an ABAP Web Dynpro which is executed via an Web Dynpro iView in Enterprise Portal.
How can I read the UserID of the portal user within the web dynpro? (the portal user will not be the user who called the Web Dynpro)
Any suggestions on this?
Thanks in advance.
Kind Regards,
Martina
~~~~~~~~~~~~~~~~
ABAP Web Dynpro developed within CRM 5.0 system
Enterprise Portal 6.0

Hi Diz,
I tried doing the same thing by following the steps as mentioned by you. Just to re iterate,
1. Created a DC "Portal Application Standalone" project by the name myservice.
2. Created a portal service inside myservice by the ame AmitsService.
3. Exposed IAmitsService.class in the public part.
4 Build and deployed the DC on server and tested it through an abstract portal component and it worked FINE !!
Now..
5. Created anoter DC of type WebDynPro
6. Added SAP_JTECHS -> epbc.prtapi._api as a "Used DC" with dependency build time and runtime
7. Specified the sharing reference in the properties as PORTAL:sap.com/myservice
8. Tried to reference the service using the following code..
IAmitsService portalservice=(IAmitsService)WDPortalUtils.getServiceReference(IAmitsService.KEY);
9.Build and deployed the DC.
10. When I run the application I am getting the following error
Processing HTTP request to servlet [dispatcher] finished with error.
The error is: com.sap.engine.frame.core.load.SAPNoClassDefFoundError: com/sapportals/portal/prt/service/IService
Exception id: [000D6008418B005C0000002C00000D200004163CE6719E1D]
PLEASE ADVISE

Ess Time Sheet and Attendance Web Dynpro - ABAP or JAVA

We are determining the resources we will be needing for the HR - ESS Time Sheet and Attendance Module.
What is this module written in. ABAP Web Dynpro or Java Web Dynpro.
Many thanks,
Multiple replies welcome.
Ken

The ESSTimeSheet is now called Record Working Time & for now it is still in WebDynpro JAVA.. looking at how complex the whole application is, it will really take some beating to rewrite the same in WDA.
~Suresh

New ESS/MSS in ABAP web dynpro??

I heard from a somebody that the new ESS/MSS is going to be redeveloped by SAP on ABAP Web dynpro instead of java? Does anybody have info on this? or any links on articles, news etc.?

You need to replace the T&E portal content and Homepage Framework config (if using it) for the "older" Webdynpro Java version with the newer (EhP2) Webdynpro ABAP version. There is a very good step-by-step guide (I believe in Service Marketplace) that guides you through each and every change to make to switch one with the other. To your immediate questions...
(1) Those are the replacements for the WDJ iViews. They are pretty much the same. As said, you need to "switch them out".
(2) Switch out the WDJ iView with the WDA iView. The parameter needs to reflect YOUR ESS ROLE pcd path to the object. (the one you show is the standard SAP ESS role....which is fine if you are just using it as is).
Again, best to find that guide. I used it on my last project and it took all of maybe 30 min. to switch the old for new if you follow it.
Also, read all the help.sap.com info on it....
http://help.sap.com/erp2005_ehp_02/helpdata/en/2c/1ec6e9352c4766a4eb1ed0b924309c/frameset.htm

Incorporating web service in an ABAP web dynpro view

Hi,
I am trying to call an external web service to have its results displayed in an ABAP web dynpro view. I've seen various threads that are dealing with the same issue, but none of them seemed to have helped me (I am quite new at this so maybe I'm just having a slow beginning, please bear with me)
I'm interested in extracting information from a simple web service online. To this end, I went on www.xmethods.net and found a "quote of the day" service, which is practical because it doesn't even need input.
I am writing down all the steps I've taken, even if they seem trivial, because maybe my problem is the result of a silly mistake I'm not yet capable of noticing...
I am mostly following the instruction from here:
<a href="/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap:///people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
The SAP I use is the one on the SC7 system, seems to be ECC 6.0
After I created my package, I go on to create a Proxy Object, and when prompted for a WSDL source, I give the URL destination I got from xmethods.net: <a href="http://www.swanandmokashi.com/HomePage/WebServices/QuoteOfTheDay.asmx?WSDL">http://www.swanandmokashi.com/HomePage/WebServices/QuoteOfTheDay.asmx?WSDL</a>
Doing this I get an HTTP error (return code 400, message "ICM_HTTP_CONNECTION_FAILED") (others have had this problem, e.g. Calling Web Services from ABAP, but the answers offered haven't been much help to me)
and having no idea what to change or not change in SICF and other settings, I decided to save the file locally, and so I then created a Proxy Object by choosing the WSDL source as the local file I saved.
Telling me that multiple port types exist (SOAP, httpGet and httpPost) I picked SOAP. I can then see the properties of my Client Proxy Object, its structure with the classes and methods etc.
Then, following Thomas Jung's procedure, I went to create a logial port which I named QUOTE_PORT. When I do the F8 test he suggests to do, I get an error: SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED") which was predictable since I still haven't resolved that same problem above.
I then proceed to create a Web Dynpro Component. In that component, in the component controller's context, I created a simple node into which I added attributes which I created using the wizard -> Attributes from components of structure, and there I picked the structures that had just been created in my proxy object, each in its own node
I have three proxy structures generated: GET_QUOTE_SOAP_IN, GET_QUOTE_SOAP_OUT and QUOTES. This last one has two attributes which are STRINGs, the quote of the day and its author.
I then create a rather trivial view, whose context I have mapped to the component controller's context so as to have access to those "quote" and "author" attributes I just mentioned. The layout is simplistic at best, containing only two textviews, each one bound to its respective attribute.
Once the application has been done and tested, the output is a blank page. I'm hoping that this is only because of that ICM_HTTP_CONNECTION_FAILED error. Has anyone else had these problems when calling external web services? Is this the right procedure for displaying output?
Thanks and Regards,
Micol

Hi, sorry for the long reply time.
from work I do have proxy settings:
automatic configuration script: http://proxy:8083
proxy server for LAN: proxy / 8080
from home it's a proxy free connection.
In both cases I tried changing the settings in the SICF transaction, but it hasn't changed much.
With the HTTP error that I get, I get a long text on how to maybe solve it,
No connection to Integration Builder (only generic data visible)
Message no. SPRX081
In this long text, I have four tests to do in order to check the connection (as far as I can understand)
1. The address of the Integration Builder must be stored in the SAP system
=>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
2. The HTTP connection of the ERP application server must function correctly
=>Check with report SPROX_CHECK_HTTP_COMMUNICATION
3. The Integration Builder server must be running correctly
=>Check with report SPROX_CHECK_IFR_RESPONSE
4. Proxy generation must interpret the data of the Integration Builder correctly
==>Check with report SPROX_CHECK_IFR_CONNECTION
The checks for 1&2 work okay, but I get errors for checks 3&4
"Integration Builder data not understood"
How can I go on from here?
Thx

ESS 1.2 - ABAP Web Dynpro Clarifications

Hi all,
We are on Ehp 2 in ECC 6.0 with ESS 1.2 in EP 7.0 and using only 'Travel & Expense' part for our implementation. I have below clarifications
1. In ESS 1.2 package we have an Overview page and iView, I believe it is for JAVA Web Dynpro, will this support for ABAP Web Dynpro iViews or how to bring ABAP WebDynpro applications with Overview ?
2. I have Mirrored the ESS PCD Content and modified only 'Invisible in Navigation Areas' parameter. Now the issue I am facing is while selecting button 'Create Travel Request' under 'My Trips and Expenses'. The request is fetching the original content navigation instead of the new Mirrored content. Also while debugging we find the routing 'Navigation Context' as below:
DynamicParameter=SAP_FITV_ACTION=&SAP_FITV_EXIT_OP=CallTripsPOWL&SAP_FITV_TRIPCMP=R&HistoryMode=1&NavigationContext=ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_travel_expenses/com.sap.pct.erp.ess.12.request
Is this parameter set by default to fetch the content ? Is it possible to change this entry, if yes, how ?
Kindly let me know if any clues.
Thanks!
Sankar Kumar

You need to replace the T&E portal content and Homepage Framework config (if using it) for the "older" Webdynpro Java version with the newer (EhP2) Webdynpro ABAP version. There is a very good step-by-step guide (I believe in Service Marketplace) that guides you through each and every change to make to switch one with the other. To your immediate questions...
(1) Those are the replacements for the WDJ iViews. They are pretty much the same. As said, you need to "switch them out".
(2) Switch out the WDJ iView with the WDA iView. The parameter needs to reflect YOUR ESS ROLE pcd path to the object. (the one you show is the standard SAP ESS role....which is fine if you are just using it as is).
Again, best to find that guide. I used it on my last project and it took all of maybe 30 min. to switch the old for new if you follow it.
Also, read all the help.sap.com info on it....
http://help.sap.com/erp2005_ehp_02/helpdata/en/2c/1ec6e9352c4766a4eb1ed0b924309c/frameset.htm

Change style of ABAP web dynpro

Hi,
I have to change the style / color of an ABAP Web Dynpro application at one of our customers.
So the standard blue background must be white and the dark blue heading backgrounds should be green for example.
How can I do this?
Is there a guide to do it?
Thanks in advance and kind regards,
Bart

Hi Jan,
Even i have done the same process for changing background theme for web dynpro application.
My requirement is to upload background image for the theme , i achieved it by changing the css file and uploading back to the custom folder and calling folder in application parameter.
But i am facing lot of issues listed below.
1.)In the application F4 help, pop up window and dropdown are not working
2.)Even for standard applications also facing similar situation
I don't know how to resolve this issue?
My SAP System version is SAP-BASIS Release 702 Level 007

Error while accesing ABAP web dynpro application

Hi Experts,
We are getting warning symbol on web page status bar, when we are accessing the ABAP web dynpro application
only first page of application is getting loaded and when we click on page it is showing error on status bar and we can perform any thing.
once we double click on warning icon,
below details are coming:
Line: 1491
Char: 3
Error: Object Expected
Code: 0
URL: url of the ABAP web dynpro application
This scenario is occuring for many ABAP WD application for a client.
Please guide how to solve this issue?
Thanks!
Piyush

Hi
First try a very simple application with nothing in it just one text saying Hello World
Run it and see what happens.
Also check if your url uses FQDN name. something like https:
company.name.co:50000\.......
If you do not use the FQDN it will always show a script error on the bottom and some functions will not work e.g
dropdowns.
regards
Yuval.

Call a ABAP Web-Dynpro-application via a BSP-Application

We have a BSP-Framework, that call several applications among other things other BSP-Applications, ITS-Application and other systems. Now I want to integrate a ABAP Web Dynpro-Application.
For the moment I can call the ABAP Web Dynpro-Application from our application.
This application runs in the same session as the Framework (verify in transaction sm04).
When I want to call another application in the Framework, the session will be killed (no more sessions in sm04). This happens also, when I want to call the ABAP Web Dynpro-Application a second time.
I guess, that the ABAP-Framework thinks I want to go outside the system (for example www.google.de) and close the session. I found out, that this wouldn't happen, if the application were suspended. But I found no way to tell the application via a url-parameter to suspend.
Can someone help me?

Thx for the tip,
but I can't firea suspend plug. Because I'm in BSP. I understand the docu so, that you have the option to call a other apllication like BSP from a ABAP Web Dynpro.
I want to call the ABAP Web Dynpro form BSP like this way.
1. Start BSP-Framework
2. Call ABAP Web-Dynpro-Application from BSP
3. Call another Application from BSP without automatically logout by unload ABAP Web Dynpro. (I have a chance to call the ABAP Web Dynpro again via url to suspend before I call the other app.)
Regards Stefanie

Exiting from ABAP Web Dynpro application

Hi,
In ESS portal we have one tab Personal info, there I have created one link and integrated my ABAP web dynpro application.
I want to exit from the application and go back to the Personal info sub area. created one exit button in my application on press of that i need take this action.
Please guide me with this
Thanks!
Piyush

Piyush,
I am not sure whether it works or not just get the navigation url of personalinfo subarea and using portal APIs navigate to that url when you click on exit button
Thanks
Bala Duvvuri

Guided Procedures Output Parameter and ABAP Web Dynpro

Similar Messages

Maybe you are looking for