GuidedProcedure - how to move uploaded document into KM?
Hello Anyone,
could you please help me on how to get an uploaded Document into a specific Directory of the KnowledgeManagement?
Currently I am trying to create a Process (Guided Procedure) which lets a User upload a Document (Callable Object->Misc->File Input), create a Folder in the KM, store this uploaded Document into that folder and adapt some folder-rights, configure discussions, etc..
However, I can't find any programs/webdynpros/callableobjects which do these things? Any hints on standard, reusable "components" which may be used as Callable Objects to work with the KnowledgeManagementSystem?
Thanks a lot,
Kai
Follow Up: is there any possibility to use existing iViews like CallableObjects, e.g. setting default parameters, chaining iViews, etc... ?
Similar Messages
-
How do I move a document into a folder in PDF reader on an iPad
How do I move a document into a file in PDF reader on my iPad
When you're looking at the list of documents, touch the Edit button at the upper-right. Then select the file you want to move by touching the check box to its left, and click the Move File icon, it's the third one from the left at the top of the screen. You'll be prompted to "Move selected document" after which the "Choose a location" dialog will appear to allow you to select a destination folder.
-
How to classify a Document into Category and subcategories
Hi,
We have a fully functional basic KM system where we upload documents into folders and subfolders. Now we have a requirement to classify the documents into categories and subcategories at the time of uploading the document. This classification will be irrespective of the physical location (folder/subfolder) of the document. For example I may have two different documents in the same subfolder, one may be classified as category "General" and subcategory "News", and the other may be classified as category "Technical" and subcategory "Whitepaper".
Also we should be able to filter our document search based on subcategories. When we search a document based on a subcategory, then the search must fetch only those documents which have been marked as belonging to that subcategory while uploading the document. In the search page, the categories must appear as dropdowns and the dropdown values must contain the respective subcategories.
As mentioned earlier, these categories and subcategories are independent of the KM directory structure.
Please let us know how to go about this step by step.
regards,
SJ.Hi
I think you can solve your problem with "Custom Properties"
Using custom properties, u will not only get "Check box", but also "Dropdown"
In your custom property, do the following
Multivalued : Check the check box
Allowed Values (csv) : Give your options
Please check this <a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/de31ec90-0201-0010-be95-f501d25027a8">article</a>
It talks about dependent properties, through which you can have , category & subcategories
Hope this will help you
Regards
Aparnna -
How to move a selection into another selection in elements 12
how to move a selection into another selection in elements 12
Open picture B, the one you wish to select something from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position object from picture B.
In the layers palette you should see picture A as the background layer, and object B on a separate layer -
New document alert: How to get PDF documents into Adobe Reader for iOS
Opening PDF Files in Reader for iOS (iPhone and iPad) has been very helpful to many users of Adobe Reader for iOS. However, Apple has drastically changed the user interface in iOS 7, which made the original document obsolete.
According to Apple Developer Support's App Store Distribution page, 89% of devices connected to the App Store are using iOS 7 during a 7‑day period ending June 29, 2014.
Because of the exceptionally high iOS 7 adoption rate, Adobe Reader for iOS version 11.3 now supports iOS 7 only.
Here are the new How-To documents for iOS 7.
How to get PDF documents into Adobe Reader for iOS (iPad on iOS 7 version)
How to get PDF documents into Adobe Reader for iOS (iPhone on iOS 7 version)
(It had to be split into two separate documents because each contains way too many screenshots.)
Hope these documents are as helpful as the original one.
Please let us know if you have any feedback or suggestions on the topics for other help documents/tutorials.Dennis (or any Adobe rep),
Any updates to the OP's question? I'm with a large government agency, and we're moving away from GoodReader for reasons I can't go into here, and the ability to add user-defined bookmarks within the app is a mandatory feature for the document reader we select. I have the latest version of Adobe Reader (11.6.1) installed on my government iPad, and the ability to add user-defined bookmarks still seems to be missing. Does Adobe have any plans to add this feature, or is it already present and I'm simply overlooking it?
Thanks,
Cam -
How do I reorganise documents into folders?
My current version is 5.5.2 (2120) in OS X Yosemite 10.10.3 (14D131) and Im looking to move created documents into specific folders.
As a student I regularly create documents on specific topics and in my Pages I have folders for each topic. What I would like todo is drag and drop documents into the folders but pages stops me from doing this.
The only way I have fixed this is to open up my iPad pages and organise the documents on there, simply by dragging and dropping.
Have I missed something on pages for Mac?On your Mac, option+Save As… . In the File Save chooser, click the small black triangle adjacent to the filename. You want this black triangle facing up so the expanded Save As panel is visible. Now, you can either navigate to and open (double-click) existing folders where you want to save your current document, or on the bottom panel is the New Folder button.
The File Save As chooser window does not support drag and drop as one might expect from a true Finder window. If you were to drag and drop a document from the Desktop into this Save As window, not only would it not copy, but it would switch the location of your Save As window to the Desktop. -
How do u merge documents into one?
how do u merge documents into one?
The other option is to open one file and then use Tools>Pages>Insert from File to add other documents.
-
How to move a document to a particular document library after workflow review and approval
Hello ,
I want to do a work flow for a document review and its approval, if the document is approved
then it should be moved to a document library called "Approved Documents". I have done
following steps but don't know how to move the document to another document library.
Library > Library settings > Add a work flow
> customized Three state work flow
and it is generating work flow review emails but don't know how to move the document
somebody please help how to do this????You can either create another SPD workflow which will run on item changed event. This workflow will check if the document status is approved and if it approved it moved document to different library. SharePoint designer does have an activity to move list
items.
SharePoint Designer workflow: Move a document from one library to another
Or you can write an event receiver which will get triggered on ItemUpdated and again if the status of the document is approved it will move your document to destination library.
Writing an event receiver will require custom coding as oppose to SPD approach.
Amit -
How to split invoice/document into two venders?
Can anyone please tell me how to split invoice/document into two vendors. Like if I get an invoice for $1000 and it needs to be splitted between father and son, $500 to each. How would I set that up in SAP? I am not sure if this will be an invoice split or a document split.
Thanks
MonikaIf you are using an FI entry F-43 to generate invoice this can be done by giving the same invoice ref. in the Inv. Ref. field for two vendors. This is manual
Document Split will split the document between two profit center and not between vendors. -
How do i move several documents into one on icloud
how do i move several documents on icloud into one document on icloud on my mac
Unless I'm misunderstanding you; copy & paste.
-
How to move multiple components into a Tab Component and still keep layout?
I have created a Combination Chart with multiple combo boxes and a slider on my Xcelsius Canvas. Now, I realize that I want to put all of this into a Tab Set Component. How can I move everything into this new Tab Component without messing up all the layout and alignment I have done on all my components already? I tried shift-selecting everything and doing a drag --> drop into the Tab Canvas but they just all stack on top of each other.
Can this be done? Would it be wiser to start a new Xcelsius document, place a Tab Set Component on the canvas and then copy --> paste from the original document into the new one? I'm reluctant to do this though (even within the same document) because it forces all components to be renamed back to their defaults such as Chart 1, Combo Box 1, etc etc.
Edit:
Bolded my biggest concern on this topic, can components be copy/pasted or cut/pasted and still retain their original name?i think this scenario would work fine for you
choose all the components you want to move from the "Object Browser"
you can show the Object Browser from the View Menu
after you select them all, you can drag them to your Tab component
or you can make them as a group, so it will be easy to move them as the same layout they have.
to make them as one group
select them all, go to format menu, and select Group
now you have all of them as one item, move them to the tab and then you can ungroup them the same way
good luck
Amr -
How can we upload file into to OCS Content repository when we are in Apex
We have installed the Oracle Application Express 2.2.1 into the OCS 10.1.2 database.
The Apex authentication is set to operate with OCS SSO.
We have made a form. There is a browse button on the form. We would like if the uploaded file appeared in the OCS content database repository as
opposed to Apex document repository.
To put it into another word, how can we upload the file into to OCS Content repository when we are in Apex.
Generally speaking, how can we reach content from Apex?
We have found many java based examples to use content sdk, but how can we use them with Apex? We believe that
content hasn't got plsql interface.
i would highly appreciate it if you sent me a full example program.Hi Ram,
Thanks for the reply
We have a requirement to device a solution to upload the policy documents related to iProcurement
I am planning to create an OA page to upload the content and planning to use the AOL function security to restrict the users those who can access this page .
Is there any better way to implement the security?
Is this approach feasible or is there any better way to approach this requirement?
Thanks -
Hi,
Can anybody point me in the right direction. I want to "upload" a document into an air application to be stored locally then upload to a webserver in the background when convenient. Is there an example of this, or documentation about how I would do this somewhere?
Thanks.Hello.
All you got to do is to use flash.filesystem.File class. With it, you can open a file with the load() method to open the local file, you can use the save() method to save the content at local machine. Finally, you can use the upload() method to send the file to a server.
Here is a example in Flex, but it's very easy to port to pure AS3: http://www.adobe.com/devnet/air/flex/articles/uploading_air_app_to_server.html.
Any doubt, just post it!
Cheers,
CaioToOn! -
Hi there and hello everybody.
I am writing a book and have been using Libre Office and would like a better word processing package.
I have heard that Pages 5 is better than the latest one. I need to be able to put my Libre Office documents
into Pages. Anyone know how to do this please?magathon wrote:
Thanks. So would you say Word is the best processing package? And how do I choose which package 'opens' them.
This is a basic computer skill you might want to learn. You can always control which application opens any document, and the steps below apply to any Mac or Windows computer you use:
Method 1: Drag the document icon on top of the application (Word, Pages, LibreOffice...) icon and release. The system will open the document in the application you dragged it to.
Method 2: Go into the application (Word, Pages, LibreOffice...) and choose File/Open. Locate and select the document, and click the Open or OK button.
Method 3: Select the document icon and choose File/Open With, then choose the application you want to open the document with.
The only time these don't work is when the application cannot open that type of document. For example, you usually can't make a photo editor open a text file. But Word, Pages, and LibreOffice all know how to open text files, RTF files, and Word files.
But if it is important that the document formatting is exactly preserved when exchanging with other Word users, you really should use Word. If you can't afford to pay the retail price for a copy, Microsoft now lets you use Office for $6.99 a month or $69.99 a year. -
How to insert one document into another in microsoft word?
I would like to set up a word document such that the document has embedded in it another document shrunk down a bit to make room for additional comments and information which I will add on the side. I've been looking to see if word 2007 has this feature
but have had difficulty finding it. Is it possible to take an entire document and insert it as a resizeable object into another?
Some of my research suggests that I might be able to accomplish something of this nature with publisher, and while several people in my office do not have publisher and we'd prefer if it were doable in word, instructions for publisher would be appreciated
as well if Word 2007 cannot do this.Hi,
Thank you for using
Word IT Pro Discussions
forum.
From your description, I understand that
you would like to know to how to add a Word document into another Word document in Word 2007, and you can make some comments besides the embedded Word documents.
If there is any misunderstanding, please feel free to let me know.
Thank you for your inquiring.
To insert a Word document to another Word document in Word 2007, follow the steps below:
=========
1.
In the Word document, click the
Insert tab.
2.
Click the
Object in the Text group.
3.
Click
object. Then click the Create from file tab.
4.
Click the
Browse button to select the Word document. Also, check the checkboxes before:
Link to file and Display as icon.
5.
Click
OK to save the settings.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for
you, please feel free to let me know.
Best Regards,
Sally Tang
Maybe you are looking for
-
AP Account Analysis Report USD not converting to Functional Currency
When I am running AccountAnalysis Report , USD not converting to SGD\ 08-JUN-09 3D NETWORKS SINGAPORE PTE TI10050729 Invoice Nonrecoverable GST Yes USD 8,395.36 8,395.36 530000844 Regards, Ajit Edited by: Ajit Raut on Jul 27, 2009 8:10 PM
-
Saving files on the same hard drive time machine is using
I was wondering how I go about saving files other than backups on the hard drive I purchased. If you can help it would be greatly appreciated. Thank you.
-
Mysteriously, I just went to reproduce the problem which has been with me for 2 days and the problem has suddenly disappeared. So sorry to trouble the group unless somebody knows how it happened and how to prevent it.
-
Moden/Router in other room
I had another router and it went out last week; so bought new one, WRT54G. My modem is actully located in the den but my desktop is in the bedroom. I moved the modem to the BR so I could connect the router up and it's working fine here; BUT I want
-
It keeps show a "check network settings are correct and network is active" what should I do I want to update my iTunes and its been showing this message for a while now.