Guidedproceduresconnector not showing UWL configuration

Hi, I'm trying to configure a new System in the UWL like it is mentioned in all the tutorials to show the tasks related with Guided Procedures but I'm not able to the "GuidedProceduresConnector" in the "Connector Type" Drop Down.
Does any body know why is this happening?
Regards.

Hi, I was not able to find the DC caf/eu/gp/model in the SDM, but I looked in a Portal where the GuidedProceduresConnector is shown and in that it doesn't exists either.
The component that I found, which I think is related, is under SAPEU caf/eu/gp/model/pwf/local/uwlconn but it is deployed correctly.
Any other suggestion??
Regards

Similar Messages

Show run does not show usernames configured on the router

Hi everyone,
I just tried doing a show run on a router. However, the usernames configured within the router does not appear in the show run. I am currently using a console interface to log into the router. Anyone has any idea why the usernames are not shown?

Hi Bilal,
Sorry for the late reply.
Answers are as follows:
When you log in, are you prompted for a username? Yes
Do you use the enable password to log in: Yes
When show user is run:
Line User Host(s) Idle Location
0 Con 0 idle 2d23h
*226 vty idle 00:00:00 <ip address>
When the show run | begin line command is run:
line con 0
exec-timeout 0 0
transport preferred all
transport output all
line aux 0
transport preferred all
transport output all
line vty 0 4
password <password redacted>
transport preferred all
transport input all
transport output all

Windows Updates not showing in Configuration Manager but Endpoint updates are working

I have an issue which I have found whilst creating ADR's. I currently have an Endpoint ADR Set up and working and tried to set up a Windows 7 update ADR but cannot get Configuration Manager to locate any updates, I even change properties to just select
the product 'Windows 7' but when pressing preview I still get no results.
This is the output from ruleengine.log when I try to run the rule.
Found notification file C:\Program Files\Microsoft Configuration Manager\inboxes\RuleEngine.box\4.RUL
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
RuleSchedulerThred: Change in Rules Object Signalled.
SMS_RULE_ENGINE 19/11/2014 11:29:20
3844 (0x0F04)
Refreshed ScheduleList instance for Rule (1) from schedule string (0153BB0000100100) with next occurence (19/11/2014 12:00:00)
SMS_RULE_ENGINE 19/11/2014 11:29:20
3844 (0x0F04)
Refreshed ScheduleList instance for Rule (4) from schedule string (5173BB0000100008) with next occurence (20/11/2014 11:20:00)
SMS_RULE_ENGINE 19/11/2014 11:29:20
3844 (0x0F04)
FindNextEventTime found next event for RuleID 1 as :19/11/2014 12:00:00
SMS_RULE_ENGINE 19/11/2014 11:29:20
3844 (0x0F04)
RuleEngine: Got next rule execution time successfully. Next event is in 30 minutes
SMS_RULE_ENGINE 19/11/2014 11:29:20
3844 (0x0F04)
Sleeping for 15 minutes SMS_RULE_ENGINE
19/11/2014 11:29:20 3844 (0x0F04)
Constructing Rule 4 using Auto Deployment Rule Factory
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Populating Rule Skeleton SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Populating Criterion Skeleton
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Populating Action Skeleton SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Populating Action Skeleton SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
CRuleHandler: Need to Process 1 rules SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
CRuleHandler: Processing Rule with ID:4, Name:Windows 7 Client Update Deployment Rule.
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Evaluating Update Criteria for AutoDeployment Rule 4
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Evaluating Update Criteria... SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Rule Criteria is: <UpdateXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Name="SMS_SoftwareUpdate" LocaleId="1033"><UpdateXMLDescriptionItems><UpdateXMLDescriptionItem
PropertyName="BulletinID" UIPropertyName=""><MatchRules><string>MS</string></MatchRules></UpdateXMLDescriptionItem><UpdateXMLDescriptionItem PropertyName="DateRevised" UIPropertyName=""><MatchRules><string>1:0:0:0</string></MatchRules></UpdateXMLDescriptionItem><UpdateXMLDescriptionItem
PropertyName="_Product" UIPropertyName=""><MatchRules><string>'Product:bfe5b177-a086-47a0-b102-097e4fa1f807'</string></MatchRules></UpdateXMLDescriptionItem><UpdateXMLDescriptionItem PropertyName="IsSuperseded"
UIPropertyName=""><MatchRules><string>false</string></MatchRules></UpdateXMLDescriptionItem></UpdateXMLDescriptionItems></UpdateXML>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Inserting PropertyName:BulletinID, PropertyValue:MS
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Inserting PropertyName:DateRevised, PropertyValue:1:0:0:0
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Inserting PropertyName:_Product, PropertyValue:'Product:bfe5b177-a086-47a0-b102-097e4fa1f807'
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Inserting PropertyName:IsSuperseded, PropertyValue:false
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Query to run is: select CI_ID from dbo.fn_ListUpdateCIs(1033) ci~where IsExpired=0~ and (BulletinID like N'%MS%')~ and (DateRevised>=N'2013-11-19 11:29:20')~ and (IsSuperseded=0)~ and (CI_ID in (select CI_ID from v_CICategories_All
where CategoryInstance_UniqueID in (N'Product:bfe5b177-a086-47a0-b102-097e4fa1f807')))
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Rule resulted in a total of 0 updates
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Evaluation Resultant XML is: <EvaluationResultXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CI_IDs></CI_IDs> </EvaluationResultXML>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Enforcing Content Download Action SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Download Rule Action XML is: <ContentActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><PackageID>NC20000A</PackageID><ContentLocales><Locale>Locale:9</Locale><Locale>Locale:0</Locale></ContentLocales><ContentSources><Source
Name="Internet" Order="1"/><Source Name="WSUS" Order="2"/><Source Name="UNC" Order="3" Location=""/></ContentSources></ContentActionXML>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Criteria Filter Result XML is: <EvaluationResultXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CI_IDs></CI_IDs> </EvaluationResultXML>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
0 update(s) need to be downloaded in package "NC20000A" (\\SCCM2012R2\UpdateServicesPackages\Updates\Windows 7 Updates)
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
List of update(s) which match the content rule criteria = {}
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
No new update was added to the package. Package "NC20000A" would not be updated.
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Download action completed for the AutoDeployment
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Enforcing Create Deployment Action SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Create Deployment Rule Action XML is: <DeploymentCreationActionXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><CollectionId>NC20000C</CollectionId><IncludeSub>true</IncludeSub><Utc>false</Utc><Duration>7</Duration><DurationUnits>Days</DurationUnits><AvailableDeltaDuration>0</AvailableDeltaDuration><AvailableDeltaDurationUnits>Hours</AvailableDeltaDurationUnits><SuppressServers>Checked</SuppressServers><SuppressWorkstations>Unchecked</SuppressWorkstations><PersistOnWriteFilterDevices>Unchecked</PersistOnWriteFilterDevices><AllowRestart>false</AllowRestart><DisableMomAlert>true</DisableMomAlert><GenerateMomAlert>false</GenerateMomAlert><UseRemoteDP>true</UseRemoteDP><UseUnprotectedDP>true</UseUnprotectedDP><UseBranchCache>true</UseBranchCache><EnableDeployment>true</EnableDeployment><EnableWakeOnLan>false</EnableWakeOnLan><AllowDownloadOutSW>false</AllowDownloadOutSW><AllowInstallOutSW>false</AllowInstallOutSW><EnableAlert>true</EnableAlert><AlertThresholdPercentage>90</AlertThresholdPercentage><AlertDuration>7</AlertDuration><AlertDurationUnits>Days</AlertDurationUnits><EnableNAPEnforcement>false</EnableNAPEnforcement><UserNotificationOption>HideAll</UserNotificationOption><LimitStateMessageVerbosity>true</LimitStateMessageVerbosity><StateMessageVerbosity>1</StateMessageVerbosity><AllowWUMU>false</AllowWUMU><AllowUseMeteredNetwork>false</AllowUseMeteredNetwork></DeploymentCreationActionXML>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Rule XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Windows 7 Client Update Deployment Rule</DeploymentName><DeploymentDescription/><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>NC200001</ScopeID><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Criteria Filter Result XML is: <AutoDeploymentRule xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><DeploymentName>Windows 7 Client Update Deployment Rule</DeploymentName><DeploymentDescription/><LocaleId>1033</LocaleId><UseSameDeployment>false</UseSameDeployment><EnableAfterCreate>true</EnableAfterCreate><NoEULAUpdates>false</NoEULAUpdates><AlignWithSyncSchedule>false</AlignWithSyncSchedule><ScopeIDs><ScopeID>NC200001</ScopeID><ScopeID>SMS00UNA</ScopeID></ScopeIDs></AutoDeploymentRule>
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Parsing Deployment Action XML...
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
Parsing Rule XML... SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Could not find element DeploymentId SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Could not find element UpdateGroupId SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Could not find element UpdateGroupName SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
The rule resulted in no updates being found. Skip deployment creation or update...
SMS_RULE_ENGINE 19/11/2014 11:29:20
3840 (0x0F00)
CRuleHandler: Rule 4 Successfully Applied! SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
CRuleHandler: ResetRulesAndCleanUp() SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
Updated Success Information for Rule: 4 SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
CRuleHandler: Deleting Rule 4 SMS_RULE_ENGINE
19/11/2014 11:29:20 3840 (0x0F00)
I am a bit stumped with this so if anyone can help I would be grateful.
Thanks
Paul

Just seen wsyncmgr is busy syncing updates so actually I think I need more patience :-)
That's always a good idea when using ConfigMgr ...
Torsten Meringer | http://www.mssccmfaq.de

SAP Portal UWL - User decision note not showing up...

I have configured the UWL to force a rejection note. However, this is not working. i.e. Rejecting works successfully (without the note).
UWL configuration is as below.
<ItemType executionMode="default" defaultAction="viewDetail" defaultView="PurchaseOrdersView" connector="WebFlowConnector" name="uwl.task.webflow.decision.TS99900008">
      <ItemTypeCriteria connector="WebFlowConnector" externalType="TS99900008" />
      <Actions>
        <Action name="approved" groupAction="yes" handler="UserDecisionHandler" returnToDetailViewAllowed="yes" launchInNewWindow="no">
          <Properties>
            <Property name="UserDecisionNote" value="true" />
            <Property name="decisionKey" value="0001" />
            <Property name="UserDecisionTitle" value="Enter a Rejection Reason" />
          </Properties>
          <Descriptions default="Approved" />
        </Action>
        <Action name="rejected" groupAction="yes" handler="UserDecisionHandler" returnToDetailViewAllowed="yes" launchInNewWindow="no">
          <Properties>
            <Property name="UserDecisionNote" value="mandatory" />
            <Property name="decisionKey" value="0002" />
          </Properties>
          <Descriptions default="Rejected" />
        </Action>
      </Actions>
    </ItemType>
The UWL support information indicates that the correct view and itemtype (and configuration) is being used. However, one concern is that the "Supported actions for this item" does not show the - approved, rejected - actions from the above custom UWL XML.
Any pointers would be greatly appreciated. We are on version 7.0.
The complete UWL XML custom configuration file is as below.
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd'
>
<UWLConfiguration version="1.0">
<ItemTypes>
    <ItemType executionMode="default" defaultAction="viewDetail" defaultView="PurchaseOrdersView" connector="WebFlowConnector" name="uwl.task.webflow.decision.TS99900008">
      <ItemTypeCriteria connector="WebFlowConnector" externalType="TS99900008" />
      <Actions>
        <Action name="approved" groupAction="yes" handler="UserDecisionHandler" returnToDetailViewAllowed="yes" launchInNewWindow="no">
          <Properties>
            <Property name="UserDecisionNote" value="true" />
            <Property name="decisionKey" value="0001" />
            <Property name="UserDecisionTitle" value="Enter a Rejection Reason" />
          </Properties>
          <Descriptions default="Approved" />
        </Action>
        <Action name="rejected" groupAction="yes" handler="UserDecisionHandler" returnToDetailViewAllowed="yes" launchInNewWindow="no">
          <Properties>
            <Property name="UserDecisionNote" value="mandatory" />
            <Property name="decisionKey" value="0002" />
          </Properties>
          <Descriptions default="Rejected" />
        </Action>
      </Actions>
    </ItemType>
    <ItemType executionMode="default" defaultAction="viewDetail" defaultView="PurchaseOrdersView" connector="WebFlowConnector" name="uwl.task.webflow.decision.TS99900011">
      <ItemTypeCriteria connector="WebFlowConnector" externalType="TS99900011" />
    </ItemType>
    <ItemType executionMode="default" defaultAction="viewDetail" defaultView="PurchaseOrdersView" connector="WebFlowConnector" name="uwl.task.webflow.decision.TS99900013">
      <ItemTypeCriteria connector="WebFlowConnector" externalType="TS99900013" />
    </ItemType>
</ItemTypes>
<Views>
    <View name="PurchaseOrdersView" referenceBundle="tasks" actionRef="" actionPosition="bottom" dynamicCreationAllowed="yes" displayOnlyDefinedAttributes="yes" emphasizedItems="new" dueDateWarning="259200000" dueDateSevere="86400000" refresh="300" tableNavigationType="CUSTOMNAV" tableNavigationFooterVisible="yes" queryRange="undefined" headerVisible="no" visibleRowCount="10" tableDesign="STANDARD" sortby="priority:descend, dueDate:ascend, createdDate:descend" columnOrder="subject, isEscalated, creatorId, createdDate, priority, attachmentCount, dueDate, status" supportedItemTypes="uwl.task.webflow.decision.TS99900008,uwl.task.webflow.decision.TS99900011,uwl.task.webflow.decision.TS99900013" width="98%" selectionMode="SINGLESELECT">
      <DisplayAttributes>
        <DisplayAttribute name="priority" referenceBundle="priority" headerVisible="yes" width="10" maxTextWidth="0" vAlign="BASELINE" hAlign="LEFT" format="default" sortable="yes" type="string">
          <Menu>
            <MenuItem name="Low" referenceBundle="menu_priority_low" actionRef="priorityLow" />
            <MenuItem name="Normal" referenceBundle="menu_priority_normal" actionRef="priorityNormal" />
            <MenuItem name="High" referenceBundle="menu_priority_high" actionRef="priorityHigh" />
            <MenuItem name="VeryHigh" referenceBundle="menu_priority_v_high" actionRef="priorityVeryHigh" />
          </Menu>
        </DisplayAttribute>
      </DisplayAttributes>
    </View>
</Views>
<NavigationNode name="root" view="" referenceGroup="" visible="yes" keepItemCountUpdated="no">
    <NavigationNode name="Main" view="" referenceGroup="" visible="yes" keepItemCountUpdated="no">
      <NavigationNode name="PurchaseOrder" view="PurchaseOrdersView" referenceGroup="" visible="yes" keepItemCountUpdated="no" referenceBundle="tasks">
        <Descriptions default="PurchaseOrder">
          <ShortDescriptions>
            <Description Language="en" Description="Purchase Order" />
          </ShortDescriptions>
        </Descriptions>
      </NavigationNode>
    </NavigationNode>
</NavigationNode>
</UWLConfiguration>

Attaching the UWL XML file
<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd'
>
<UWLConfiguration version="1.0">
<ItemTypes>
    <ItemType executionMode="default" defaultAction="viewDetail" defaultView="PurchaseOrdersView" connector="WebFlowConnector" name="uwl.task.webflow.decision.TS99900008">
      <ItemTypeCriteria connector="WebFlowConnector" externalType="TS99900008" />
      <Actions>
        <Action name="approved" groupAction="yes" handler="UserDecisionHandler" returnToDetailViewAllowed="yes" launchInNewWindow="no">
          <Properties>
            <Property name="UserDecisionNote" value="true" />
            <Property name="decisionKey" value="0001" />
            <Property name="UserDecisionTitle" value="Enter a Rejection Reason" />
          </Properties>
          <Descriptions default="Approved" />
        </Action>
        <Action name="rejected" groupAction="yes" handler="UserDecisionHandler" returnToDetailViewAllowed="yes" launchInNewWindow="no">
          <Properties>
            <Property name="UserDecisionNote" value="mandatory" />
            <Property name="decisionKey" value="0002" />
          </Properties>
          <Descriptions default="Rejected" />
        </Action>
      </Actions>
    </ItemType>
    <ItemType executionMode="default" defaultAction="viewDetail" defaultView="PurchaseOrdersView" connector="WebFlowConnector" name="uwl.task.webflow.decision.TS99900011">
      <ItemTypeCriteria connector="WebFlowConnector" externalType="TS99900011" />
    </ItemType>
    <ItemType executionMode="default" defaultAction="viewDetail" defaultView="PurchaseOrdersView" connector="WebFlowConnector" name="uwl.task.webflow.decision.TS99900013">
      <ItemTypeCriteria connector="WebFlowConnector" externalType="TS99900013" />
    </ItemType>
</ItemTypes>
<Views>
    <View name="PurchaseOrdersView" referenceBundle="tasks" actionRef="" actionPosition="bottom" dynamicCreationAllowed="yes" displayOnlyDefinedAttributes="yes" emphasizedItems="new" dueDateWarning="259200000" dueDateSevere="86400000" refresh="300" tableNavigationType="CUSTOMNAV" tableNavigationFooterVisible="yes" queryRange="undefined" headerVisible="no" visibleRowCount="10" tableDesign="STANDARD" sortby="priority:descend, dueDate:ascend, createdDate:descend" columnOrder="subject, isEscalated, creatorId, createdDate, priority, attachmentCount, dueDate, status" supportedItemTypes="uwl.task.webflow.decision.TS99900008,uwl.task.webflow.decision.TS99900011,uwl.task.webflow.decision.TS99900013" width="98%" selectionMode="SINGLESELECT">
      <DisplayAttributes>
        <DisplayAttribute name="priority" referenceBundle="priority" headerVisible="yes" width="10" maxTextWidth="0" vAlign="BASELINE" hAlign="LEFT" format="default" sortable="yes" type="string">
          <Menu>
            <MenuItem name="Low" referenceBundle="menu_priority_low" actionRef="priorityLow" />
            <MenuItem name="Normal" referenceBundle="menu_priority_normal" actionRef="priorityNormal" />
            <MenuItem name="High" referenceBundle="menu_priority_high" actionRef="priorityHigh" />
            <MenuItem name="VeryHigh" referenceBundle="menu_priority_v_high" actionRef="priorityVeryHigh" />
          </Menu>
        </DisplayAttribute>
      </DisplayAttributes>
    </View>
</Views>
<NavigationNode name="root" view="" referenceGroup="" visible="yes" keepItemCountUpdated="no">
    <NavigationNode name="Main" view="" referenceGroup="" visible="yes" keepItemCountUpdated="no">
      <NavigationNode name="PurchaseOrder" view="PurchaseOrdersView" referenceGroup="" visible="yes" keepItemCountUpdated="no" referenceBundle="tasks">
        <Descriptions default="PurchaseOrder">
          <ShortDescriptions>
            <Description Language="en" Description="Purchase Order" />
          </ShortDescriptions>
        </Descriptions>
      </NavigationNode>
    </NavigationNode>
</NavigationNode>
</UWLConfiguration>

Structure field not showing in view confirguration

Hi,
I enhanced a standard component ICCMP_BP_DETAIL in CRM 7.0 and i need to add BP_ROLE in view ICCMP_BP_DETAIL/BuPaDetailB2B ,
i can see the BP_ROLE in customer context node attribute but when i click on view configuration, its not showing it as available field there.
can anyone please advise me why this field is not showing in configuration tab when i can see it in customer context node attribute in ICCMP_BP_DETAIL/BuPaDetailB2B view?
Regards,
Kamesh Bathla
Edited by: Kamesh Bathla on Jul 14, 2009 4:46 PM

Problem solved
All i needed to do is in spro->crm->ui framework->design layer->deactivate hiding of field and create the new entry with the checkbox checked .

SRM7.0 Workitem is not showing in Manager WorkOverview(UWL)

Hi Experts,
Work items are not showing in Manager->Work Overview->Task though it is available in SAP inbox for SRM 7.0.
Regarding UWL configuration i have done bellow things:
1. Created a system connector with SAP_SRM Alias
2. Registered it.
But the workitem is not showing in the Manager WorkOverview task tab.
One more thing, when i checked the system connection (SAP Web AS Connection) form System Landscape, i got error message saying...
6. The Web AS ping service https://saprst00.freescale.net:1443/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to https://saprst00.freescale.net:1443/webdynpro was not obtained successfully; this might be due to a closed port on the Firewall
I think may be this is one of the reason why work item is not appearing in the manager tab.
Please guide me how can i solve above issues..
Thanks & Regards,
Sambaran Chakraborty

Hi Masa,
I have checked the SAP inbox with transaction SWI5, and for the particular user(with admin right) there is a Task TS10008126 with work item id 6407635.
Now when i checked in the transaction SWI1 with the above work item id it shows the below information..
ID: 6407635
Work item type: Dialog Step
Language: English
Work item text: Approve shopping cart of JUDY SYDIONGCO with value 1,000.00 USD
Creation date: 11/30/2010
Creation time: 13:12:52
Task: TS10008126
Task Text: Approval of shopping cart
Status: READY
Priority: 9 Lowest
Work flow id: 6407627
Agent: No Agent Available
Workflow: 6407629
Administrator:
Creator: FLOWITEM 0000064076290000000109000000
So from those information how can i check for correct approval.? as the workitem is available for the approver sap inbox(SWI5)........ and there is no Webflow connector error.
Masa as i said i am also getting connection test failure error.. so is thre any chance due to this work items are not showing ?
Thanks,
Sambaran Chakraborty

UWL not showing workitems

Hi,
I have configured the UWL and getting the message on Register "UWL System_Name Created Successfully", but the problem is that after configuration the UWL is not showing the work items.
Please help me.
Regards
Deep

Have you you registered the work items for the sytem.
There should be an opition to do that when configuring UWL

Due date is not showing up in UWL

Hi ,
Due date is not showing up in UWL. Back end is ECC not GP Just regular work flow.
I can see in workflow object end date kind. But the field is blank. For due date any additional configuration needed.
I really appreciate your help.
Regards
Mark

Hi,
As far as I remember correctly, the Due Date in UWL is the Requested End date in the workflow. So basically you need to open the workflow in backend in WF builder and look at the step. There is a tab for setting different deadlines and stuff. If you do the settings there (for example set the requested end in 3 days), I think that work item will display the due date based on that data.
Regards,
Karri

Iview for UWL not show the tab(Taks, Alerts, Notifications, Tracking)

Dear experts.
I am facing the following issue.
In the MSS for the Workset: Work Overview , for UWL the system not show the tab(Taks, Alerts, Notifications, Tracking), ie the system not show none tab, show a page in blank.
My question is: What is the cause of this issue?
Thanks in advance
regards

use the standard role for UWL, ie check if you are using any modified XML for uwl
This happens if you use custom XML and hide the tabs
Enable the support information for UWL and check in UWL administration
check here
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq
http://wiki.sdn.sap.com/wiki/display/TechTSG/%28UWL%29Navigationnodeca
nnotbeselected
If you only have the .tra and .001 files on the system (and the
standard files) then you can proceed as follows:
So what do we need to do to fix this?
This is a known issue with the MSS system and the generated XML f
However, the fix is quite simply achieved...
For both the .001 and .tra xml files you will need to do the foll
1. Download and save your config for both com.sap.pct.erp.mss.001
com.sap.pct.erp.mss.tra:
2. Open the saved version and save the file with a new name.
Access the configuration file within the zip file and proceed to
the following changes:
I would like you to navigate to the following place in your XML f
<! Work Center UWL shows the same
entries as Control Center UWL >
<NavigationNode name="root"
view="" referenceGroup="">
For every navigation node that has a full path assigned I would l
you to delete up to and inclusive of the last full stop that is
listed in the node. Here is an example for you:
a) first node identified is that fits the criterion above is:
<NavigationNode name="com.sap.pct.erp.mss.Alert"
or check here
system admin, system config
UWL and Workflow
UWL adminsitration
Click to Configure Item Types and Customize Views Using a Wizard
Customize the look of the UWL main page
Select the alerts tab
Click the remove tab from current view button
Then click save and return. The tab is now gone from the UWL UI.

UWL is not showing New and In Progress tasks

Dear All,
We are facing a strange concern where the UWL is displaying all the below work items.
Tasks forwarded to someone
Tasks for Resubmission
Completed Tasks
But not the New and In Progress tasks wherein the work items are already available in the user inbox.
The system details are SRM 7 with EHP 3 and the Netweaver portal is 7.30 SP 09
Please find the below screen shot for your reference.
And I would also like to update you that the below has already been tested.
1.) Check in SBWP - workflow inbox of the respective user wherein the work items are available already.
2.) In the SWI5 transaction code, the work items are in Ready status
3.) From Portal perspective, the webflow connector has been defined and it has got connected successfully.
4.) In the Webflow xml file, we are able to see the above highlighted task id which has already been defined.
With that, I am able to understand that if there is any action on the work item in SRM system, the same is getting replicated in UWL. Else it is not getting displayed in the UWL if there is no action been done on the work item.
Could you please check and advise if anyone has any other suggestions on the above. Thanks in advance for your help.
Best Regards,
Bharathi

Dear Bharathi
I hope you are well and many thanks for using the SAP Discussion Forums .
Ok now based upon your scenario and the points you have highlighted there are a few important points to be highlighted.
Firstly we need to remember the concept through which the UWL Service functions and operates.
Ok with the UWL the normal behaviour follows the notion of the UWL Interface taking "5 Minutes"
for the tasks to actually load into the UWL upon intitial logon.The UWL works using two Pull operations. Firstly tasks are pulled from the backend into the UWL cache and they are pulled a second
time from the cache into the UWL User Interface. Due to this architecture there is an inherent delay in the automatic refreshes of the UWL. There is no way, in the current architecture that the UWL can refresh instantaneously. This is upon inital load as the cache must be built first upon logon so there will always be a delay. Real time refresh in the latest versions, is only when you complete a task.
Now with reference to your scenario you mentioned the following:
Points of interest
Tasks forwarded to someone
Tasks for Resubmission
Completed Tasks
"But not the New and In Progress tasks wherein the work items are already available in the user inbox."
Now from your analysis perspective you mentioned examining the following:
Checked in SBWP - workflow inbox of the respective user wherein the work items are available already.
In the SWI5 transaction code, the work items are in Ready status
From Portal perspective, the webflow connector has been defined and it has got connected successfully.
In the Webflow xml file, we are able to see the above highlighted task id which has already been defined.
Ok what I would you to do here is review and carefully cross reference your current UWL Destination Service Configuration setup as the smallest discrepancy (if any) can cause unpredictable and unexpected behaviour.
- SAP Note: 1133821 - UWL Destination Service configuration
Check that after applying Note 1133821 the destination names and the UWL connector names exactly match, even considering case-sensitiveness. I mean if your portal system alias (=UWL connector name) is for example XYZCLNT100, then the rfc destination name should be exactly XYZCLNT100$WebFlowConnector. If that is not the case, please correct the rfc destination accordingly.
After you have checked/prepared the RFC destination for the future use please re-register that connector in the UWL config UI (Portal->System Administration->System Configuration->Universal Worklist) with which you would like to use this RFC destination.
Restart the UWL portal service as the followings: Portal -> System Administration -> Support -> Portal Runtime -> Application Console -> com.sap.netweaver.bc.uwl -> Show -> in thecom.sap.netweaver.bc.uwl.core.portal.UWLPortalService row press restart.
Re-create the connector in the config UI again and register the connector.
Clear the UWL cache
Additionally kindly review the documentation below to ensure the optimal parameters are maintained for workitems being brought into the UWL.
KBA number: 1577547 UWL Performance Tips and Considerations
Also, you may want to take a look at our sizing guide that our colleagues colleagues in development support have written in relation to the UWL. You will find this if you go to: You can find the document under this path: www.service.sap.com/sizing > sizing guidelines ' SAP NetWeaver > UWL Sizing guide
These are details that you need in order for the performance to be optimal in the Universal Worklist. Please check through the documentation to see if your parameters are set accordingly and also that you have followed the information in this document.
http://wiki.scn.sap.com/wiki/display/BPX/The+list+of+items+shown+here+could+be+outdated.+Waiting+for+update
SAP Note: 1886490 UWL does not show the most upto-date items after login
Kindly update me as per your findings.
I greatly appreciate your time and patience and I look forward to recieving your reply.
Troy Cronin - Enterprise Portal Support Enginerr

Outlook not showing up in Synchronization Configuration

I am a new user of Blackberry Desktop Software. Over the past 2 years, I have been syncing my Blackberry with my Outlook through our company's Enterprise Exchange server wirelessly. Now that I have left the company, I am trying to use and configure the Blackberry Desktop Software on my own.
I downloaded and installed Desktop Software v4.6. I am on Windows Vista and am using MS Outlook 2007 installed. My phone is a Blackberry 7130.
My problem is that when I try to configure Synchronization, MS Outlook 2007 does NOT show up as an option. The only options I see are (1) Yahoo! and (2) Ascii Importer/Exporter. This is true whether I am setting up synchronization for my Calendar, Tasks, MemoPad or Address Book.
How do I configure the software so that I can sync my phone with Outlook? Thanks in advance for any help you can provide.
Message Edited by hvillarica on 08-28-2008 02:49 AM

It sounds like the IT Policy from the BES you were connected to, restricts it from syncing with any other outlook user etc..
try wiping the device and or calling ur prev emp and getting them to send a blank IT policy to the device, but that would mean u would have to connect to their BES again which they prob wouldn't like.
There is info on the net on how to remove the IT policy but I am not authorised to give out such info..
Sorry
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

Server: Mail configuration of Server Admin not showing ANY Accounts

I have an LDAP directory for my accounts and in the Server Admin GUI, under the Mail configuration, I am not showing any accounts. Currently mail services not working and I have tried to reconstruct the db to no avail.
I the POP log im gettting ...
Aug 10 14:03:29 mail pop3[24233]: DBERROR: critical database situation
In the Mail Access log ...
Aug 10 14:04:56 mail lmtpunix[29548]: DBERROR: critical database situation

How about more info?
Did you ever have a working setup? Accounts?
How did you try to reconstruct?
Check /var/log/mailaccess.log and post some more info for a process number (number in square brackets)

Third party Certificate not showing up in SQL configuration manager drop down box

Hi,
I have an SQL instance that needs to use a third party SSL certificate for all communications to that SQL instance. I have installed my third party certificate via MMC and it is showing under the Personal Folder.
However, when i go into the SQL configuration manager and right click the instance name > Properties > Certificates, it is not showing in the drop down box.
I am currently using MS SQL Server 2008 R2, which is installed on Windows Server 2012.

Hi,
If the certificate cannot be used for SQL Server and hence will not be visible in SQL Configuration manager. Check the validity of the installed certificate. It may not has the correct DNS name.
I suggest you request a new third party certificate from the vendor with the correct DNS name. Install it on SQL Server environment, then you should see certificate form the configuration manager dropdown box.
Thanks.
Tracy Cai
TechNet Community Support

Configure "Always hide forms document message bar" and "Do not show edit warnings" for all users?

We need to do a mass deployment of Adobe Reader XI 11.0.3 with "Always hide forms document message bar" preference setting automatically set for every user so they do not have to go through the menu and set it manually.
Is there a way to configure this for all users with the customization wizard or another method?
We also need to do the same for "Do not show edit warnings"
If these are registry keys, which registry keys set these options?

Try http://www.adobe.com/devnet-docs/acrobatetk/tools/PrefRef/Windows/DocumentStatus.html?zoom _highlight=message#idkeyname_1_5647.
If that doesn't work and there's a configuration item in the preferences UI, do this:
Get regshot.
Close everything but Acrobat/Reader.
Take a reg shot.
Configure the setting via the UI.
Tak another reg shot.
Compare the two.
That process will give you your answer.
If there is no corresponding pref in the UI, then you probably can't do it.
Ben

Oam does not show the correct configuration information

Oracle apps,
An issue with the oam.
There are 2 nodes in our system. In 12
One is for db and cm
The other is for forms and apache.
The system is running fine.
But from the OAM, where it does not show the correct configuration info.
From the OAM, all the services are (including db, cm, forms, apache) on one node.
The issue might be caused by the fact that the web tier was cloned from the cm tier as a workaround for some patch errors in web tier.
I even used the EXEC FND_CONC_CLONE.SETUP_CLEAN; to clean the system tables and ran
Autocfg on all tiers. But it didn’t solve this issue.
How can I fix this OAM problem to make it show the correct information?
Thanks,
Lily

Thanks for reply.
Yes, I did commit it.
The hostname information is correct.
On oam, this web node is there but all the service actually running on this node is
showing under the cm node .
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>

Guidedproceduresconnector not showing UWL configuration

Similar Messages

Maybe you are looking for