Guidelines to upload Assets into DAM
Hi,
We are in a process of uploading Assets into CQ DAM (AEM 5.6).
Example folder struture is:
/content/dam/exercises/test/
What is the recommended Assets limit that we can upload in 'test' level dam folder.
I've seen in the google groups that Adobe receomends don't use more than 200 to 250 assets at one level. But we are uploading around 5000 images in a single folder. If it is not recommended, can any one let me know the best practice.
Thanks
Siva
Hello Siva,
There are various way and completely depends on your project requirement. Offcourse it is not suggested to keep that huge number of file in a single folder. Here i can suggest one good approach which i normally used is as below.
1. Categorized those assets if possbile lets say based upon your business areas or anything similar. Based on that create your high level of folders
2. Now under all these folders create sub folders hierarchy like a, aa, ab ac... and b, ba, bb, bc ... and c, ca, cb, cc and after some level of depth store your assets which makes each folder to have assets in between 100-200.
I hope above will help you do make some decision.
Thanks,
Pawan
Similar Messages
-
Unable to upload assets in DAM
Sometimes when I start CQ, I see a blank screen for DAM home page (see below) in which I don't see any default Geometrixx folders and also the new button is disabled. I can only search the assets but not upload any new. Any pointers on what can be wrong here ?
This happend to me once -- i cleared my browser cache and it solved the issue.
-
LSMW for uploading assets using BAPI
Hi.
I am trying to upload assets from a flat file into the standard table using LSMW with BAPI.
I could upload the assets by calling the BAPI from an ABAP report. But when I use the same BAPI in LSMW it gives an error while maintaining structure relationships.
I created different source structures for header segment, general data and for depreciation areas on same level. While assigning these structures to target structures it asked for maintaining hierarchy between them. After I created that hierarchy I could maintain the relationships properly. But the read program was not generated.
Please help me in this.
Thank you.Hi Savitha.
Thanks for the reply.
The identification field need to be defined in case of data maintained for several source structures in one file. I am maintaining the data for each source structure in a separate file.
Still it is giving me the same problem that is not generating the read program.
If I dont maintain the hierarchy in source structures then it is generating the read program but then gives error while converting the data.
Don't know how to proceed. -
Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
Attachments:
PWMs.vi 130 KBother problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2
-
Hi, when I upload music into itunes from a cd it sometimes appears in itunes as two different albums and split up the music in 2 or even three albums....how can i merge these albums...this is particularly true when one album may have different composers?
Generally setting a common Album title and Album Artist will fix things.
For compilations that aren't, select all tracks, Get Info, and on the option tab set Part of a Compilation to No. If it already says No tick the box alongside, then click OK.
For deeper problems see Grouping tracks into albums.
tt2 -
How to clear PSA data in advance berfore upload data into PSA by process
Could someone tell me how to clear previous PSA data before upload data into PSA through process chain,tks
Hi,
Try
Deleting Requests from the PSA
http://help.sap.com/saphelp_nw04s/helpdata/en/b0/078f3b0e8d4762e10000000a11402f/frameset.htm
Hope this helps.
Thanks,
JituK -
Error while uploading file into KM
Hi Experts,
I m getting error while uploading file into KM. Its throwing an error message like " Syngenta-POC.doc" does not exist, or file is empty; you cannot upload empty files"
please assists me.Shantanu,
Please check the files which you are upload is empty or unknown format. If everything seems valid then try to check for the corresponding SAP Note in service.sap.com
Ram -
How to upload data into IT0000 using ABAP-HR program
Hello,
I'm required to upload data into multiple infotypes [IT000, 0001, 0002, etc] using single input text file. Can anyone able to guide me, how to upload data into IT0000 using ABAP program ?
Thanks in advance.
Regards
Prabhakar.
Message was edited by:
Prabhakara MuthyalExample code for HR_MAINTAIN_MASTERDATA to COPY IT0002
DATA: INT_0002_FINAL TYPE STANDARD TABLE OF PA0002 WITH HEADER LINE.
DATA: VALUES LIKE PPROP OCCURS 10 WITH HEADER LINE,
RETURN LIKE BAPIRETURN1,.
LOOP AT INT_0002_FINAL.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-PERNR'.
VALUES-FVAL = INT_0002_FINAL-PERNR.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-BEGDA'.
VALUES-FVAL = INT_0002_FINAL-BEGDA.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-ENDDA'.
VALUES-FVAL = INT_0002_FINAL-ENDDA.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-nachn'.
VALUES-FVAL = INT_0002_FINAL-NACHN.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-gblnd'.
VALUES-FVAL = INT_0002_FINAL-GBLND.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-vorna'.
VALUES-FVAL = INT_0002_FINAL-VORNA.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-rufnm'.
VALUES-FVAL = INT_0002_FINAL-RUFNM.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-name2'.
VALUES-FVAL = INT_0002_FINAL-NAME2.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-inits'.
VALUES-FVAL = INT_0002_FINAL-INITS.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-famst'.
VALUES-FVAL = INT_0002_FINAL-FAMST.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-gbdat'.
VALUES-FVAL = INT_0002_FINAL-GBDAT.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-sprsl'.
VALUES-FVAL = INT_0002_FINAL-SPRSL.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-anzkd'.
VALUES-FVAL = INT_0002_FINAL-ANZKD.
APPEND VALUES.
VALUES-INFTY = '0002'.
VALUES-FNAME = 'P0002-natio'.
VALUES-FVAL = INT_0002_FINAL-NATIO.
APPEND VALUES.
* maintain master data
CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
EXPORTING
PERNR = INT_0002_FINAL-PERNR
ACTIO = 'COP'
BEGDA = INT_0002_FINAL-BEGDA
* ENDDA = INT_0002_FINAL-ENDDA
SUBTY = SPACE
NO_ENQUEUE = SPACE
DIALOG_MODE = '0'
TCLAS = 'A'
IMPORTING
RETURN1 = RETURN
TABLES
PROPOSED_VALUES = VALUES
* MODIFIED_KEYS =
EXCEPTIONS
OTHERS = 1.
IF RETURN IS INITIAL.
WRITE:/' Done....'.
ELSE.
WRITE:/ RETURN-ID, RETURN-TYPE, RETURN-NUMBER, RETURN-MESSAGE_V1, RETURN-MESSAGE_V2, RETURN-MESSAGE_V3, RETURN-MESSAGE_V4.
ENDIF.
CLEAR VALUES.
REFRESH VALUES.
ENDLOOP. -
Upload data into SAP through standard program
hi!
why don't we prefer to upload data into sap through standard program like RFBIKR00 to upload for vendor master or other standard programs to upload durectly without using BDC or LSMW and how do we upload data into SAP through BAPI.
pls help me with a sample program.
regards
AmitIt totally depends upon the requierment which fields your want to update in transaction if it works with program then use program else go for bdc .
If there is some any screen enhancement with z fields then program will not solve the problem.
For BAPI you check these links:
http://www.sap-img.com/abap/bapi-step-by-step-guidance.htm
http://sap-img.com/bapi.htm
Edited by: shilpi agarwal on Aug 22, 2008 7:28 AM -
Can the wiki be configured to link to a file already on the server rather than uploading it into the page? This would enable users to open (and edit) the original server hosted document rather than downloading a static copy that can't be edited and synced back into the wiki page.
As a workaround I've tried attaching an alias to a file but it doesn't work - the wiki instead uploads the aliased file.
From what I can work out, the default wiki behaviour is to upload a document to a wiki page, which creates a copy of the uploaded document in the wiki database. This copy has no connection to the original document. It can be downloaded and edited, but the edits are not saved back into the wiki hosted version of the document.
I'd like to be able to upload a link or alias to a document (with preview please!) already on the server. A user could then preview the document or click to open and edit it.
The only way I can do this at the moment is to create a link "afp://123.../doc.rtf" to the original. This is timeconsuming and confusing for non-technical users and doesn't offer the benefits of the attach function (ie document preview).
Is there any way the wiki can be configured to link to documents already on the server using the attach functionality?An update for anyone in a similar situation.
Patch 3944727 for 9.0.4.1 that solves this issue: "USER LOV IASM11SHIP EDIT USER LOV SHOULD SHOW THE NICKNAME ATTRIBUTE." However, the patch is mutually exclusive with the latest CPU's and there's no plan to merge the pacthes given the dwindling support for 9.0.4.1. So that patch is pretty much worthless.
I've been told that this patch is included in newer portal versions, so the real solution is an upgrade.
Trenton -
Converting uploaded documents into FlashPaper
Hi all,
i have a doc management system, in which i want to convert
all the uploaded docs into FlashPaper. The input docs will be in
different formats like PPT,DOC,PDF etc. is there any server side
API to do tat? i dont want the user to be aware of what conversion
is happening at the server. I have built the system in PHP, Please
help me out.
TIAHi,
I think you have startged two discussions for the same question:
Please check the below mentioend
http://forums.adobe.com/message/5318601#5318601
~Pranav -
How to upload data into form of Oracle EBS R12 using ATS ver 9.0
Hi experts,
Could you please guide me how to upload data into form on Oracle EBS R12 using Oracle Application Testing Suite verson 9.(The simpliest way)
For example: I need to create user account on Oracle EBS. Normally, I use Dataloader to upload the data, however it just can upload one by one record, cannot upload multi record at same time. Moreover if the performance of server is low, so I will get the issue when using dataloader.
Thanks in advance
Best Regards
HieuHi you can create Virtual users to enter data. Note than you have to name the objects accordingly.
For Example default recording provided by Open script is ObjectNAME_(Index No of the object).
when you record one iteration the name of any object would be ObjectNAME_(0)
You can then create virtual users so the index will increment as the total number of Virtual users increases. Also you have to handle which row of your test data would get mapped to which Virtual user in the script run session.
Thanks -
Uploading data into a fixed length file
hello experts,
I got a task to upload data into a fixed length positional file from internal table.So please help me.
regards,
sriram.Hi there. What you basically need to do is set up the path and name for the export file, move your records to an output table, and then transfer the data to the file that you have specified. We usually set up our export programs so that the user can choose to download the file locally or onto the application server. So first we define the following fields on the selection screen:
PARAMETERS: p_file(128) LOWER CASE OBLIGATORY. "File
*path name from system standard
PARAMETERS: p_path LIKE rlgrap-filename MODIF ID fpn. "Path Name
PARAMETERS: p_local AS CHECKBOX. "Local File Flag
Then we use this to set the path to the application server:
INITIALIZATION.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = 'Z_AO_HR_UP_LOAD'
parameter_1 = space
IMPORTING
emergency_flag = lw_emergency_flag
file_name = p_path
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
AT SELECTION-SCREEN OUTPUT.
make path name display only
LOOP AT SCREEN.
CHECK screen-group1 = 'FPN'.
screen-input = 0. "Output (Display) only
MODIFY SCREEN.
ENDLOOP.
After your START-OF-SELECTION statement, you need to open the file for output:
IF p_local NE ztc_on.
Get Path/file Name using logical filename.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
logical_filename = 'Z_AO_HR_UP_LOAD'
parameter_1 = p_file
IMPORTING
emergency_flag = lw_emergency_flag
file_name = p_path
EXCEPTIONS
file_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
w_message = 'No Output file - Missing Logical File Z_AO_HR_UP_LOAD'.
WRITE: / w_message.
IF sy-batch = 'X'. "Is this in a job?
NEW-PAGE.
PERFORM end_of_selection.
MESSAGE e000(38) WITH w_message. "This causes the job to cancel
ELSE.
MESSAGE i000(38) WITH w_message.
ENDIF.
w_stop = 'X'.
STOP.
ENDIF.
*Check if output file is already present.
OPEN DATASET p_path FOR INPUT IN TEXT MODE.
IF sy-subrc EQ 0.
CLOSE DATASET p_path.
WRITE: 'Output Data file already present ', p_path.
*Use the following for logging error message
CONCATENATE 'Ouput Data file already present ' p_path INTO
w_message.
IF sy-batch = ztc_on. "Is this in a job?
NEW-PAGE.
PERFORM end_of_selection.
MESSAGE e000(38) WITH w_message. "This causes the job to cancel
ELSE.
MESSAGE i000(38) WITH w_message.
ENDIF.
w_stop = 'X'.
STOP.
ENDIF.
OPEN DATASET p_path FOR OUTPUT IN TEXT MODE.
IF sy-subrc <> 0.
WRITE: 'Unable to open output dataset - ', p_path.
*Use the following for logging error message
CONCATENATE 'Unable to open output dataset - ' p_path INTO
w_message.
IF sy-batch = ztc_on. "Is this in a job?
NEW-PAGE.
PERFORM end_of_selection.
MESSAGE e000(38) WITH w_message. "This causes the job to cancel
ELSE.
MESSAGE i000(38) WITH w_message.
ENDIF.
w_stop = 'X'.
STOP.
ENDIF.
ENDIF.
Next you perform all of the steps to put your data in the internal table. After the end of selection we then transfer the data from the original internal table (which has many separate fields defined) to a second internal table, t_outfile, in which each record has a single field that is the total length of the original itab record:
*Internal table for Output data
DATA : BEGIN OF t_outfile OCCURS 0,
text(1000).
DATA : END OF t_outfile.
Then you can download your file, checking whether it goes to a local drive or the application server:
IF p_local EQ ztc_on.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
filename = p_file
TABLES
data_tab = t_outfile
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
gui_refuse_filetransfer = 8
OTHERS = 9.
ELSE.
LOOP AT t_outfile.
TRANSFER t_outfile TO p_path.
ENDLOOP.
ENDIF.
Now close your dataset if it is on the application server:
IF p_local NE ztc_on.
CLOSE DATASET p_path.
ENDIF.
I hope this helps!
- April King -
Issue with permissions to upload files into Apache web server to OS 10.8.2
Hello everyone;
I setted up Apache web server and mysql to OS 10.8.2 Mountain Lion. It's working fine except for the permissions. I can't upload files into the web site directory. Doesn't recognize, e.g., the PHP function "move_uploaded".
One problem for my is that I can't modify the permissions by "Terminal" app since it telling me that the "Process completed" and I can't write any script.
Any suggestion will be welcome.
Thanks in advance.My only question now would be how to speed up Safari's 6.0.1 performance in 10.8.2 or do I just accept that it's a little slower than it was, which is fine. Are other folks having this issue?
I was primarily passing along info about my particular download speed and for the Web Confidential 3.8 people: make a backup of your passwords b4 installing 10.8.2 or be prepared to upgrade. -
Problems with special characters uploading data into oracle database
Greetings
I have a problem uploading data into oracle tables from sybase datasource. The data that I want to upload is in Spanish, for example when I have a varchar field with the data 'Consultoría', in oracle table the data upload with interrogation symbols.
I have my source and target datastores configured as follows.
Any suggestion? Thank you for your timeChack section 10 Locales and Multi-byte Functionality in the SAP Data Services Reference Guide for an exhaustive description of NLS settings.
As a summary, following settings are required:
locales in the datastore definitions match the actual locale used in the associated databases
the locale of the DS engine allows for source to target translation
the character set in the target database supports storage of accented characters
Maybe you are looking for
-
How can I wash the inside of my smart case?
I know I can use eraser to clean the outside of the smart case. How about the inside?
-
Can only print 1 page even do I have 2?
Am trying to print graphics that fills more than 1 page and even do am using Book class to be able print several pages I cant? This is how I try: public int print(Graphics g, PageFormat pf, int pageIndex)throws PrinterException shapes.pri
-
When I I try to add persona it said I need Firefox 4.0 and I have 4.0. So what is wrong.
-
Can't Turn Off Workgroup Master Browser
I'm probably missing something but I've got a 10.6.1 server that is setup with a Magic Triangle and I was trying to setup a share for someone to access and I cannot setup SMB without the Workgroup Master Browser being checked and I really don't want
-
Entering serial Number on Expired LR4 Trail Version
My trial LR4 has expired. I have a serial number. When I start LR I get a screen that says my trial has expired and LR will now quit. My only option is to press OK, and the program quits. I have read other responses, telling me to use the HELP