Guitar Chords/Notes Getting Cutoff/Muted Problems?

Well I tried to search for similar issues and couldnt find one, so please forgive me if this has been discussed already.
So I just recently picked up an iPad1 and the garage band app, which I have to say is pretty darn cool for an app. I am a long time Logic user, and have been playing around with this app a bit and am noticing a really big cutoff problem. If I try to strum chords manually (to hit certain parts, rather than a straight strum down every time like the button does), it sounds fine. But when I play back the recording it doesnt hold the chord. It acts as if I muted the chord so whenever i change the pattern it cuts off other notes. I also notice it does this most of the time when I pluck out individual notes in chord mode as well. I have tried some variety in the way i record it such as holding down the string longer, or keeping my finger on it, making sure I am not hitting the back part which I noticed purposely gives a muted sound, and have made sure im not accidentally pulling off a string pre-maturely.
The strange things are that when you play it sounds like its keeping the sound, and the midi view even looks like the note lengths are being held, and dont display a small picks.
Is it possibly just that iPad1 cant handle the processing? Anyone happen to know if exported to a desktop version it will work properly. Anyone else notice this same issue (Id assume plenty have)?
Any help would be great, I am just very curious about this as I really think its a great little App for something like the iPad.
Thanks!

Do you have Quantization switched on? this might have the effect of chopping up your chords when it tries to get them to conform to the selected setting ie 1/4 or 1/8 notes etc
I tried it with Quantize on and did get an effect similar to what you describe.
hope this helps

Similar Messages

Delta reocrds are not getting extracted . Problem with delta Quaue

Hello friends .
Could you please help me in this scenario ?
Its related to delta load from application 12 , - 2LIS_12_VCITM.
Some how data is not getting transferred from LBWQ to RSA7 . There are more than 200000 entries in LBWQ , but the job is not able to transfer any entries to RSA7.
For rest other application , data is going correctly .
The job status showing is correct , like XXXXX LUW are transferred there is no error in Job log , it technically correct .
I have found one notes , in SAP service market place , but still it doesnt match with my job status . My job status is NOTESID ..where as per the notes it should WKEDPI*** ( something like this ) .
I have taken below steps to solve this problem but still it doesnt work .
1.     Removed job from schedule ( the job for LBWQ to RSA7 ) and Executed the job manually .
2.     Executed Program RMSBW12.
3.     Deleted the Delta Q from RSA for application 12 and regenerated the same once again by running the infopackage , early delta initialization with out data transfer , . Once Delta Q is generated , run the job once again .
I hope , I tried with all correct way ..but still I could not able to transfer the data .
But with all above steps , still data is not transferred . Daily infopackage is running as per the schedule , and bringing only 0 record . If it still doesnt work then I have to do Re-initilization . and this is big cost for us . as we have to lock the sys for users and so on .
Could you please give me some tips , that how can I transferr the data from LBWQ to delta Q ( RSA7) . If it works then definitely , I will save my lot of time .
Please suggest me , how can I proceed . Please save me from this situation.
Many many thanks in advance.
Regards,

Hi Akshay,
Go to SMQ1 and check MCEX12 Queue. If your delta records are piling up in SMQ1 and not being transfered to RSA7, you need to check your back gound job control option once again.
The back ground collector job will collect the recrords from SMQ1 and push to RSA7.
Try to execute RMBWV312 program in SE38 and manully push all the recrods to RSA7. Once all the records are available in RSA7 you will find the MCEX12 queue will be cleared in SMQ1.
Cheers
Praveen

Not Getting Emails - BIS Problems

Hello there,
I've had my 8330 (service provider: Bell Canada) since the Spring and yesterday I recieved a message saying:
"SUBJECT: Action Required: Validate Password
Validate the password for (myemail) in the BlackBerry Internet Service! Email messages from (my email) are not being delivered to your BlackBerry device. To resume receiving email messages from this email address, validate the password for (my email) in the BlackBerry Internet Service:
1. Open your BlackBerry Internet Service account by completing one of the following actions
     * On the Home screen, click the Setup icon and click Email Accounts or Email Settings
     * Using a browser on your computer, visit the BlackBerry Internet Service Web Site
2. Go to the Email Accounts page
3. Edit (my email)
4. Type password
5. Click Save"
I went through the Setup icon on my phone and went to Email Accounts. It says my email is invalid but there's a "Validate" button. I click that and it asks for my email password. I type it in and click enter and it says that my email is now validated. But I'm still not getting emails to my phone. I have no idea what could have prompted this, and I really don't know how to fix it!
Can someone please help me? I'm so confused!

Evergreen,
On your BlackBerry device, go to:
1. Options > Advanced > Host Routing Table > Menu > Register.
2. Resend your service books from your carrier BIS site:
From your handheld device:   http://www.blackberry.com/btsc/KB15402
Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
From your desktop PC: http://www.blackberry.com/btsc/KB02830
North American Carriers - scroll down to select your carrier
WorldWide Carriers - Find your carrier on the list
3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

The speaker Icon looks as if it is just muted but it will not get un-muted, how do I get it to do th

My laptop speaker Icon will not unmute upon clicking it and unmuting the usual way. It says audio device is disabled. How to I fix it.

If you did not buy one that specifically states it does voice directions-there is nothing you can do.
Check the app settings, check the app website.

Data of different session are not getting refreshed.

We used select one choice and it is bind to the iterator. Data of different session are not getting reflected.
Problem Scenario : Two browsers are open with same screen . In browser-1, I am adding new item which display on drop down of same screen. But drop down of browser-2 is not displaying the new added value.
Please let me know how to refresh the data of browser-2 if I added data on different session.
//JSFF entry
<af:selectOneChoice binding="#{backingBeanScope.Product.ICTCSTName}"
id="iCTCSTName" simple="true"
label="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.label}"
required="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.hints.mandatory}"
value="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.inputValue}"
autoSubmit="true">
<f:selectItems value="#{bindings.tpCrudeSuperTypeFindAllPopulatedCT.items}"
binding="#{backingBeanScope.Product.si2}"
id="si2"/>
</af:selectOneChoice>
//Pagedef entry
<list IterBinding="tpCrudeSuperTypeFindAllPopulatedCTIterator"
ListOperMode="navigation"
ListIter="tpCrudeSuperTypeFindAllPopulatedCTIterator"
id="tpCrudeSuperTypeFindAllPopulatedCT" DTSupportsMRU="true">
<AttrNames>
<Item Value="superTypeName"/>
</AttrNames>
</list>

Are you sure backingBeanScope is the correct scope for your scenario?
Session scope sound more appropriate to me.
binding="#{backingBeanScope.Product.si2}"

Problem in BADI, error message not getting displayed

Hello Experts,
I am facing a strange problem in BADI.
The requirement is that the user should not be allowed to change the plant field
on the screen of standard MM transctions for PO/PR amendment.
I have written the code in separate BADIs for PO and PR.
I am displaying an error message if the user tries to change the field.
For PO, it is working fine.But for PR, the same code is not working.
The control is going over to the BADI for PR and rest of the code is working fine.
But the error message is not getting displayed for PR amendment.
Can anybody please suggest the possible cause of problem and some solution to it.
Thanks in advance.

Hi
See the sample BADI code for PR which raises an exceptions and do accordingly
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method :            POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
    IF l_s_eban-estkz NE 'B'.
      CLEAR v_mtart.
      SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
      IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
        MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
      ENDIF.
    ENDIF.
    IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
      IF l_s_eban-knttp NE 'A'.
        IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' )
           AND l_s_eban-matnr EQ space.
          MESSAGE e000(zm_msg) WITH 'You cannot create'
            'a PR without material number'.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHOD.
<b>Reward points for useful Answers</b>
Regards
Anji

I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. Help

I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.

Go to Settings > Privacy > Location Services.
Turn off SnapChat.
Go to Settings > Notification Center
Turn off SnapChat.
Restart the device.
Go to Settings > Privacy > Location Services.
Turn on SnapChat.
Go to Settings > Notification Center
Turn on SnapChat.
Test the issue.

Regarding Pages charts, when I try to 'build' a 3D chart all I get is little dots but not graphics. No problems with 2D charts though. Guess my question is "Help?"

Regarding Pages charts, when I try to 'build' a 3D chart all I get is little dots but not graphics. No problems with 2D charts though. Guess my question is "Help?"

Sorry for the delay getting back to this.
Thanks to Fruhulda and Peter for their comments regarding the refusal of Pages to let me make 3D charts.
In answer to the questions put to me in this regard :
1. Pages version : Pages '09 v.4.1 (923)
2. Mac O/S :          v.10.6.8
3. 3D chart :          Can't find a 'name', but upright bars with rounded corners ???
4. Moved apps :    Not that I'm aware of! All should be as installed off the disc.
5. A note :              I have been able to create these in the past - related to a SW update?
                      and ... can create these charts perfectly in Keynote (go figure).
Thanks to all.
CM

HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

Connect the iPod to your syncing computer and restore it via iTunes. However, if iTunes asks for the unknown passcode you need to place the iPod in recovery mode and then restore the iPod from backup. For recovey mode see:
iPhone and iPod touch: Unable to update or restore
"If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software."
Above is from:
http://support.apple.com/kb/ht1212

New problem! When I sync my iPhone 5s to Outlook the events entered in my phone Calendar do not get updated to my outlook calendar on my laptop yet entries on entered on my outlook calendar do get updated to my phone??

New problem! When I sync my iPhone 5s to Outlook the events entered in my phone Calendar do not get updated to my outlook calendar on my laptop yet entries on entered on my outlook calendar do get updated to my phone??
iPhone 5s
Software - IOS 8.1
iTunes - v12
I have been using sync on all previous phones to date without issue, I have had the 5s since Nov 2014 and no issue, on Sunday without warning or changes to my phone or Outlook sync now has this error.
I have restored my phone but still has same problem.

Your IT person is an idiot.
http://lmgtfy.com/?q=how+to+sync+iphone+with+outlook

Not only do web pages not load properly but we're doing calculus on-line and only 1 video can be viewed at a time. last week we didn't have problem. wish i could call someone. not getting any help.

a number of site say done and we see a blank page. on-line calculus class, last week could view more than 1 video at a time now only 1 can be viewed. this course need to be completed by may 3. career builders some of the drop downs aren't working. need to find a job. these are serious errors that we did not experience before. we haven't updated to 4.0. now i see the one's who have are having these problems. daughter can't gt to e-mail. wish i could talk to someone. i'm going to try the live session at 2 but i'm not a techy. can take care of most problems, but this seems beyond me. HELP
s

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

I am using Iphone 4s. In App Store Update, this page is not getting loaded in my iphone. Blank screen is showing up, rest all pages are getting open. Please tell me the problem and solutions.

Hi,
My Name is Pranav.
I am using i phone 4-s.
In my iphone when i go to app store > Updates, system showing me 10 updates but when i try to open this page, page is not getting open. Loader came up and then white blank screen is visible. Rest all Featured, Top Charts Genius and Search are working fine but updates page is not getting open.
Guys please help me out to sort this problem.
Thanks,
Pranav
[email protected]
+91-8460366331

Looks O.K. to me Opens correctly in Firefox and Opera as a log-in page for Killer Content - Win7x64 Fx5.
I can't see any oddities in your plug-ins. It never hurts to clear any relevant cookies and your cache.
You could see how it goes in Safe Mode - Hold Shift key down as you double click on the Firefox icon>ignore the page that opens and continue. If the page opens you probably have a problem with extensions or themes and you should work through this -
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
A lot of things have been updated as well as Firefox and you could have a culprit or conflict. Next, if there is no improvement you could try disabling third party toolbars, and you should report back at this stage or if there has been early success.
Someone may come by with a more specific remedy.

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this....

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this.....I have set the email setting to "push" mode. Moreover I can't edit the mail server address ....current it's on Yahoo SMTP server

Will it get rectified and restored...if so after how long. What could be the reason for such outage kindly share, as I am facing real problem because of this...

HT4623 My texts have stopped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose texts are not getting through. We have both restarted our iphones but the problem contin

My texts have stoipped getting through to one of my contacts. I can phone him and I can receive his calls and messages. I am the only one of his contacts whose texts are not getting through. We have both restarted our iphones but the problem continues.

Have you talked to your carrier (or your friend to his)? Could be an issue at their end.

Guitar Chords/Notes Getting Cutoff/Muted Problems?

Similar Messages

Maybe you are looking for