Guitar rig 5 compatability with Logic Pro X in monitor and playback?

Guitar rig 5 output very distorted in Logic Pro X in monitor and playback?
Worked fine in Garageband, do I need to change any audio settings in Logic or Guitar Rig?

Hey guys, I am trying to demo Guitar Rig 5 and it wont let me install it, once I download the demo.
Any ideas?
I have been searching high and low

Similar Messages

  • Audio/MIDI Interface Compatibility with Logic Pro 7.2

    Hello,
    Is/are there a recommended audio/midi interface(s) that will work without audio/midi timing glitches with Logic Pro 7.2? Currently, I am using Pro Tools LE v7.1, along with the DIGI002 Rack. That combination works very well, with no glitches whatsover. The possibility of using Logic Pro 7.2 raises the question of what would be a compatible interface. I don't think the DIGI002 Rack has the necessary drivers, although I may be mistaken. However, there must be an interface that works well with Logic Pro 7.2.
    Any help or advice would be much appreciated.
    Thank you,
    TonyVT
    iMac Intel Dual Core   Mac OS X (10.4.6)  

    Hello,
    I went to the Metric Halo Web site and was not able to find the interface that you may have been referring to. It looks like the Mobile I/O may be the correct one, however, that interface is much more than I would want to spend (http://www.mhlabs.com/metric_halo/products/mio/)
    The price seems to be @ $1200. Anyway, I am somewhat confused regarding the Metric Halo.
    Any additional advice/help would be appreciated.
    Thank you,
    Tony Ventura
    www.tonyventura.com
    iMac Intel Dual Core   Mac OS X (10.4.6)  

  • Wha wha pedal work well with GarageBand but don't want to work with logic pro 9.1.8 on my MBPro end 2011

    Install on MacBook Pro end of 2011 with logic Pro 9.1.8 and Apogee GIO interface guitar
    The wha wha pedal work well with GarageBand but not working with Logic Pro
    Only the red light turning on and off at the screnn of the MBPro and on my Apogee GIO (Guitar Interface Midi) switch button but the effect wha wha won't work.
    HOPE YOU UNDERSTAND MY ENGLISH

    Pancenter...
    Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
    I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
    +1 on the UAD stuff....
    Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
    Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
    Thread 32:
    0   libSystem.B.dylib      
    0x94c29afa mach_msg_trap + 10
    1   libSystem.B.dylib      
    0x94c2a267 mach_msg + 68
    2   ...tope.audioplugins.AU.Trash2
    0x667bd57a catch_exception_raise + 250
    3   libSystem.B.dylib      
    0x94c57259 _pthread_start + 345
    4   libSystem.B.dylib      
    0x94c570de thread_start + 34
    That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

  • Is there anyone use M Audio Axiom Pro 61 with Logic Pro 9?

    Does Axiom Pro's Hyper-Control work fine with Logic Pro's Plug-in and Instrument?
    Please Share your Opinion

    {quote:title=majo> Can Axion Pro Control Soft Instrument such as Sculpture as well as Plug-in?
    Yes.
    Is there any Logic Plug-in that Axiom Pro can't Control?
    No.

  • Trying to get this "One" sound with Logic pro 8

    Hi everyone i spent like 2 hours last night trying to get this sound with Logic Pro 8 soft synths trying to find a sound exactly like or close to this sound: http://home.comcast.net/~tommykry/Weezer%20-%20Troublemaker.mp3
    The sound can be heard at 00:19 and through out the song, its like a low bass synth kind of sound that drifts down when its hit, like a portamento kind of thing. In live weezer videos the bass player is hitting a pad on a keyboard so i know its a key sound not a bass guitar slide. ive heard this sound in trance and techno songs as well. I have Sonar 8 and pro tools 8 as well and can look there if i have too, also have an Access viress Ti, But im trying to do this all in Logic. Like i said i played around for like more than 2 hours going through most of all the Logic synths, patch after patch trying to find something close i could tweak, so if anyone has more experience with The Soft synths in Logic Pro 8 and can steer me in the right direction i would be greatful.
    Thanks
    Tommy

    In live weezer videos the bass player is hitting a pad on a keyboard so i know its a key sound not a bass guitar slide.
    He could just be triggering a bass slide sample...
    It's some kind of bass sound that bends down, in a similar style to what a bass player might do. Whether it's a real bass or a synth is difficult to say (and probably doesn't matter a great deal), but in any case it's certainly compressed, and grunged up dirty with some amp sim or distortion...
    Try that route...

  • Korg nano séries it compatible with Logic Pro x ?

    Korg nano séries it compatible with Logic Pro x ?

    It's usually not about if the hardware is compatible with LPX.. It's if it is compatible with Mountain Lion that matters... as LPX needs 10.8.4 to run...
    So, if the Nano series is compatible with Mountain Lion, you should be good to go..
    To find out, see Korg's website
    http://www.korg.com/SupportPage.aspx?productid=415
    ...and download the compatibility chart found there...

  • 01v96i Yamaha...will it work with logic pro X

    I bought the new Yamaha 01v96i Mixer but I can't make it works with Logic pro, in the list of available DAW I only find the 01v96 which is not the same and in-fact it does not work with the 01v96i.
    Does anyone have an idea on how to set Logic for it or at least does anyone know if the new Logic Pro X has the new 01v96i in the list?

    Lyford,
    Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
    Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
    As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......

  • Digidesign 192 units with Logic Pro X

    Hi- is it possible to use 2/3 Digidesign 192 units with Logic Pro X or am i still relegated to 8 ch in/out w the D. core audio driver? I recently bought an Universal Audio Apollo 16 that I can use for mixing/editing on my iMac or MacBookPro but I have 2 192 units and am thinking of buying another to run on an 2009 Mac Pro for live recording or would I be better off just selling the 192's and purchasing another Apollo 16for 32 tracks for live recordings?
    I could only get 8 ch in/out with LP 9 and will need more inputs for the live recording rig and would rather use Logic than PT 8.
    Thanks!

    Logic Remote detects Logic Pro via Bonjour, which is done via a technology called "DNS Multicast". AirPlay, etc. all work this way. Make sure it has the most recent firmware and maybe google for issues with it.

  • Will the Tascam FW-1884 work with Logic Pro X?

    Hello,
    I notice that the new Logic is 64 bit only and yet the Tascam FW-1884 is specifically listed as a supported control surface.
    Tascam has not released 64 bit drivers for this device!  Can anyone shed any light on this?  Will it work only as a control surface and not an audio interface?  Is the documentation in error?  Anyone have this working with Logic Pro X?
    Thanks,
    Lyford Rome

    Lyford,
    Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
    Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
    As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......

  • Will MainStage 3 work with logic pro 9

    Hi
    Will i be able to use Mainstage 3 with Logic Pro 9. I intend to use it for playing guitar over backing tracks made within Logic Pro 9. Also is latency a problem. I have 2.5GHz quad core I5 MacBook Pro with 4Gig RAM.

    You shouldn't have latency problems if you have it set up properly. I can run both programs simultaneously on a 2009 dual core 2.4 MacBook Pro with 6 GB Ram. I would consider upgrading your RAM. You may want to try using the Playback plugin in Mainastage 3 for playing back your mixed down tracks. Then you would only need to run Mainstage by itself live.

  • Performance issues with Logic Pro 9

    Hi,
    I'm experiencing quite big performance issues with Logic Pro 9:
    bad midi timing and sync, user interface is kinda slowing and less reactive, ...
    Mac Pro 2x2.26 Ghz Quad, 4Gb ram, early 2009, shipped with 10.5.6 now upgraded to 10.5.8
    Should I upgrade to 10.6.2?
    Thanx

    Hi,
    I'm using the same machine ...
    I never get any performance issues
    I bought my mac in March 2009 and I was ben ready to work in less that 3 days without issue...
    so more details about your setup are required to answare!
    4GB ram???
    I suggest to check your ram!!!
    Ram must be compatible with Xeon Nehalem Try specification!
    if you add 1GB of ram from nor clear manufactor.. i suggest to disconnect the addition 1GB RAM
    G

  • I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

    I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
    Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
    Ken

    MUYconfundido wrote:
    Pancenter,
    Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
    The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
    Thoughts?
    Thanks,
    Tristan
    Tristan...
    This is what you have, correct?
    http://www.alesis.com/usbmidicable
    This from Alesis..
    "The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
    Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
    My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
    pancenter-

  • I have Logic Pro 8.0.2 and would like to upgrade. I'm running OS Lion on a 2010 MacB Pro. What is the best option? Logic Pro 9 App or Logic Studio? Can't find upgrade price. Or should I just stay with Logic 8?

    I have Logic Pro 8.0.2 and would like to upgrade. I'm running OS Lion on a 2010 MacB Pro. What is the best option? Logic Pro 9 App or Logic Studio? Can't find upgrade price. Or should I just stay with Logic 8?

    Same here, I have Logic Studio 8 and wouldn't mind staying with that version, except that the installer won't run on my new Macbook Pro as PowerPC apps are no longer supported. That's the message I get in any case.
    I use to run Logic on a 2006 Macbook Pro.
    I guess that makes me a very unhappy Apple user! I've been using Logic from the Emagic days, bought every upgrade only to see Apple kill what used to be one of the best Pro Audio application. Imagine if they had done the same to Photoshop, there would be a lot of unhappy designers out there
    Paying the full price for years to slowly see your daily app go down in price & efficiency until it's given away at $199 for semi pro users. Well, at least ProTools is stil alive & kicking so I guess that's the way forward now.
    This is coming from someone that never ever used a Windows machine to make music! Life is good still!

  • Questions about Novation Remote 25SL integration with Logic Pro 8

    Preface: I have to apologize in advance if this seems somewhat confusing. I'm sure some of the terms I'm using are just plain wrong - I'm somewhat of a n00b.
    I have a Novation Remote 25SL configured to use AutoMap with Logic Pro 8 from Novation's website and most things are working well. It's confusing at times because sometimes I find it hard to tell what mode the keyboard is in, but that's ok - it's the least of my worries. Based on what I've seen through reading the manuals and my own experimentation, I have a couple of questions:
    - Despite what the guy at the store told me, I can't seem to figure out how to select different kits from within the SL. For example, if I have a garageband instrument selected on a track - can I use the data/select knob on the SL as it is now, or do I have to program that somewhere, somehow? Or if I have Ultrabeat on a track, can I use the knob to select the different kits/banks?
    - Is there a way to control non-Apple AU plugins like the rest of those which ship with Logic? All the sexy looking ones like Ringshifter, Compressor, Overdrive, etc. It seems odd that Remote will go into Mixer Automap mode and be able to control the certain portions of the instruments, but not the plugins that are automatically loaded into the channel strip when the instrument is loaded.
    - I have a 25 key Remote. In Ultrabeat, I find the key maps miss a chunk of notes between where the drum pads end and where the keyboard starts (or vice-verse). Is there a way to get it so each key has a mapping? 25 keys in Ultrabeat, 25 keys on the board plus 8 drum pads - seems like there's lots of room.
    Thanks in advance for all your feedback.
    Message was edited by: Jason Lixfeld

    Follow-up research:
    Apparently there is a driver conflict between the AlphaTrack and the ReMOTE. So far I have got the ReMOTE working - sort of - in Logic using the following method which was published at Novation's Answerbase:
    1. disconnect the alphatrack.
    2. launch Logic and then turn on the ReMOTE SL.
    3. Go into the Environment window, and add a Monitor Object. Connect it to the Remote SL's ports 2 and 3.
    So far, this seems to at least get MIDI note input into Logic, but the Automap function seems a bit sketchy so far. This will depend on Novation updating Automap and the SL's firmware for Logic 8.
    As noted previously, there doesn't seem to be any AlphaTrack support in Logic 8 yet and it's up to Apple to make it work. They do support their TranzPort product, so with luck there'll be support in the next update.
    I'd really love to use BOTH control surfaces with Logic simultaneously -- the AlphaTrack with the Mixer and plugins, the ReMOTE with Software Instruments. I suppose it might take some interesting mapping but this doesn't seem like that strange a setup -- there are plenty of "mixer surfaces" like the M-Audio one, and the Novation Automap stuff is quite popular....

  • M-Audio 61ES not playing nicely with Logic Pro X!

    The 61ES has been doing some really wacky things: I opened it up out of the box for the first time last night and right off the bat the middle octave of notes on the controller were very quiet compared to the high and low notes on the board. It was like the velocity wasn't working properly on those keys or something. The sounds worked fine in Logic when I pencilled them in. But I was too tired to mess around with it more, so went to bed and figured I'd deal with it in the morning. So this morning, the middle octave of keys seems fine, but the middle G just won't play at all. And many of the notes aren't tracking, or playing- especially during fast passages.
    I pulled up Pro Tools 10 and the 61ES worked fine. So something is going on between the controller and Logic. Anyone have any ideas?
    I'm running it on a MacBook Pro with 10.8.5. And the latest version of Logic Pro X- 10.0.6. Thanks for any advice!

    Try this....
    http://www.noterepeat.com/products/m-audio/usb-midi-controllers/axiom-air-series /269-m-audio-axiom-air-series-setup-with-logic-pro-x
    Also make sure you have installed the latest drivers for the Air and Logic...
    Axiom AIR Mini 32 Hyper Control Logic v1.0.2 (Mac)
    Other that that.. Id contact M-Audio support for further help and advice
    http://www.m-audio.com/support

Maybe you are looking for