Guitar Rig and Logic Studio

The Guitar Rig that is in MainStage;
How do I insert that into a Logic Studio 8 track?
I'm assuming I'd start with an Audio track as opposed to MIDI.
Just can't seem to locate the Guitar Rig - only Guitar Amp Pro.
Thanks

I picked up the answer;
Create an Audio track in Logic with open library selected.
You will see the mainstage guitar rigs in the library.
Note that they do not appear when creating a software instrument.
For those of you interested - this works fine!

Similar Messages

Would it be possible/reasonable to run Guitar Rig and Reason simultaneously on a MacBook Air?

Would it be possible/reasonable to run Guitar Rig and Reason simultaneously on a MacBook Air?

Hi there, Klaus1, BDAqua and a brody,
Thank you ever so much for your kind replies! (I tried giving you the 10 pts. of 'Correct Answers' to each of you, but unfortunately it was only possible for Klaus1, so the points were distributed between him and BDAqua even though you were all helpful!)
My next question will naturally be: Is SheepShaver legal? My Google search didn't yield any conslusive proof that it was, nor any that it wasn't, but as the E-Maculation web page seemed quite official and above board I would assume that it is.
The next logical step would be to ask whether it's safe for both HW and SW to run SheepShaver. HW, it appears, is very rarely, if ever, affected by SW settings, so I would assume that hardwarewise, I'm good to go. Could it ruin the kernel of Mac OS X's Unix-based operating system?
Kind Regards,
Stefan

Realtime Playing of Guitar Rig thru Logic: FW800 interface?

Hi , it would simplify my life so much to be able to play my N.I. Guitar Rig thru logic as a plugin. I'm about to get the G5 Quad and am wondering about the metric halo 2882(which is FW 400) or the fireface 800. is there a better chance of ultra-low latency thru FW 800 ? I've read that people are playing in realtime through logic , a drummer i spoke with said he's plying the BFD plugin in realtime, so that seems pretty promising, but will i be able to do that with a firewire interface? i have Motu 2408 now but i'm selling it to switch to the quad.

I use GuitarRig all the time and have no latency issues using a Fireface 800. Both the Fireface and the 2882/ULN2 have great and fast converters so there shouldn't be much difference there. However, drivers are the most important. RME's drivers are excellent and the actual hardware does its own metering calculations so you have realtime results in the RME mixer and the host CPU doesn't have to any extra background processing for the driver. I would assume that MH hardware/drivers operate the same way.
One thing to clarify, though, is that you can sum hardware inputs into the DAW mixer using RME's mixer. It's probably a less intuitive process compared to the MH mixer, but it's functionality still resides in RME's TotalMix software.
90% of my sessions are recorded at 24/48 and I usually use a 128 sample buffer without noticeable latency. I've even tried 256 and didn't find it noticeable either. For comparison, I perceive the same amount of latency (which is pretty negligable) when playing through AmpFarm on PT HD Accel, and GuitarRig through the Fireface 800 with a 128 sample buffer (both sessions @ 24/48)
Hope this helps.

Apogee ensemble and logic studio

I got a new apple desktop pro quad 2.66 and Logic Studio.
I have been using a Motu 828mk11 and logic 7 pro.
I was considering using the Apogee Ensemble and was wondering if anyone using Studio has any luck with Ensemble and if they think the switch would be worth the investment.
I also Use an API A2D preamp with the digital outs.....any news on how that might work with Ensemble?
anyway, just a note, if anyone cares, the UAD Nevana X2 works really tightly with Logic Studio and its WORTH the purchase price. amazing.

Respiro wrote:
saved through it as wavs?
If you use outboard gear for mix and processing i.e you route out your Software Instruments thru some of the Apogee outputs (analog/optical or digital), process them using some external analog or DSP processors and route back the processed sound to the Apogee Inputs ( i.e Logic Mix track ), then the mix may be different, rather than the Logic native Bounce.
If you use Logic bounce, then Apogee is just a monitoring device as was mentioned before. I agree if you have several devices and play same (previously) bounced Logic audio file thru the different devices they may sound different - this the test the audio engineers make in the laboratories.
Personally I own several devices and I prefer to use one for final mix monitoring (which is most "true" not "sweet or pumped"), some for recording, other for internal DSP processing, depends on the situation...
!http://img59.imageshack.us/img59/4967/aglogo45.gif!

Guitar Rig and Third Party Controllers

For Guitar Rig users
I bought the Behringer FCB1010 MIDI foot controller to replace the limited Rig Kontrol. I have programmed it and it works great with Guitar Rig
I also run Guitar Rig as a plug-in in Garage Band and I can record real instrument tracks with Guitar Rig effects. However under this scenario the Guitar Rig software doesn't respond to the FCB's commands which doesn't allow me to use the expression medal or change any effects during the recording. The GarageBand MIDI indicator does flash when I step on the controller however the sound isn't getting over to Guitar Rig.
I'm very frustrated it over this. Can someone help?
Thanks
JG

I think your interpretation is correct. When you get GR you'll find that it has a Learn function so that you can pass to it whatever codes you want. I was actually able to setup several effects on/off parameters, switch GR presets within a bank, the two expression pedals.
When I run GR in GarageBand the GR plug in doesn't respond to any of the commands from the FCB.
Here is what NI's suppport person sent to me:
"the problem occurs due to a Garage Band limitaion which makes the send midi function nearly unusable.
If you plug in Guitar Rig FX on an audio track you cannot send midi to it. And If you use it as an audio instrument you could send midi to GR, but because Garage Band does not support a sidechain function of audio instruments, you cannot record audio. To record audio you need to use the FX version of GR (same as in Logic), but you cannot send midi to an FX in Garage Band.
This is defenitely a big limitation of this host sequencer. "

Guitar Rig and Projectmix help

Hello everyone! Would appreciate your help on this one:
I have a Guitar Rig 3 (Rig Kontrol Interface)
and an M-Audio Project Mix IO
I could not figure out how to Use GR3 as my IN and Projectmix as my OUT in Logic 7.2.3.
I believe this is an aggregate device thing. Can anybody help me with the steps i have to do to make this setup work? Thank you very much!
p.s.
Running Leopard 10.5.1

Well, I just responded to this in related thread - here is the reply:
Hmmm... I don't Batter but here's what you can with other NI AUs - adapted for your situation.
Open the .lso after Logic has been launched under Rosetta - the PPC AUs should load ( i.e. Battery 2 should load ok ).
Go to Battery 2, save your presets for all your songs.
Relaunch Logic, now native ( rosetta disabled ).
Create a new B3 instance - load the b2 preset in to the Battery 3.
That should cover most of the job.
Cheers,
J
P.S. Of course, work on copies of your work until the transfer has been verified.

Using guitar rig in logic -9 but not getting same sound....

Hey fellow logic users
Ok heres the problem ( cut to the chase ) I am hooking up my guitar directly to the audio box direct to input 1 I have guitar rig in my plug in section now when i play the song and want to play along It comes out clean, but when i press record enable it plays like the guitar rig sample i created then when i press the space bar to start playback to practice it it plays clean but then whe i record it comes out slightly not the way it sounds when not recording I hope this is understandable lol : ) what do I need to do to make what I sound like in the guitar rig while rehearshing it so it comes out the same and not clean. I put the playback knob on my audio box in the middle so i can hear the drums bass e.t.c aong with the guitar but still no dirty sound during rhearsal before recording Thanks

Check under the audio menu options that "auto input monitor" or something like that, is enabled.

Difference between Logic Pro 9 and Logic Studio?

I have garage band and I notice that the instruments available are extremely limited, so I am looking to upgrade solely for the idea of getting more instruments and more features. Does the app store Logic Pro 9 have the extensive amount of official instruments to download for free? Or are there additional costs if you are looking to purchase the instruments for the app store logic 9?
I know that the studio version has mainstage, compressor and other programs etc, but what I am looking to find out is if there is a difference between what instruments, resources and materials found in the $210 Logic 9 and the Logic Studio version that you can't download for free from inside Logic 9?
Thanks

Hi
Segall wrote:
Does the app store Logic Pro 9 have the extensive amount of official instruments to download for free?
The instruments themselves are embedded within the Logic application, with the exception of the sample libraries for the EXS24 and Ultrabeat. All of the content, including the various Jampacks and sample libraries are available to download
Segall wrote:
Or are there additional costs if you are looking to purchase the instruments for the app store logic 9?
No.... free
Segall wrote:
I know that the studio version has mainstage, compressor and other programs etc, but what I am looking to find out is if there is a difference between what instruments, resources and materials found in the $210 Logic 9 and the Logic Studio version that you can't download for free from inside Logic 9?
The "Studio" DVD's include the now defunct Soundtrack Pro, which had around 20G of loops, beds and sound FX. Some of that material is now available for Final Cut X.
A few utility programs are also missing (Waveburner etc).
CCT

How to run Pro Tools 7.4 LE and Logic Studio 8.0.2, simultaneously..

My setup: single Quad Core 2.8GHz 8GB of RAM, running Logic Studio 8.0.2 (projectmix)
Single 1.8 GHz G5 running Pro Tools LE 7.4 (digi 002 rack)
I want to set up Logic (as master) as my main sequencer, to run Pro Tools for audio.
What's the best setup?
1. Midi the two interfaces together, sync by MTC, or Midi Clock….if so, what are the settings, as I had an unsuccesful run at it using MTC...
or
2. Run both programs on my Quad Core - is there a way to have Logic run Pro Tools on the same machine - with two different interfaces on separate firewire ports?
Any info would be appreciative.
Thanks

Monster Mash wrote:
My setup: single Quad Core 2.8GHz 8GB of RAM, running Logic Studio 8.0.2 (projectmix)
Single 1.8 GHz G5 running Pro Tools LE 7.4 (digi 002 rack)
I want to set up Logic (as master) as my main sequencer, to run Pro Tools for audio.
What's the best setup?
1. Midi the two interfaces together, sync by MTC, or Midi Clock….if so, what are the settings, as I had an unsuccesful run at it using MTC...
or
2. Run both programs on my Quad Core - is there a way to have Logic run Pro Tools on the same machine - with two different interfaces on separate firewire ports?
Any info would be appreciative.
Thanks
I did the following:
Set up the audio output for the Logic to be the internal sound card, and hook up this via Digital lightpipe to the Digi002 rack lightpipe inputs, set them to SPDIF in the hardware setup page. You'll need a special adaptor to go out of the headphone outs of your mac to turnit into digital signal. Check your Mac's manual for that.
Then set up an IAC buss for the midi, inside the AudioMidiSetup software,and tell ProTools to send MTC to this IAC buss, while telling Logic to receive MTC via the same IAC buss. Make SURE you ahve the same exact SMPTE and MTC flavor on both amchnes, and also the right sample rate (match it on both)
Then, set an Aux input in ProTools Le to accept the incoming SPDIF stereo signal from Logic, press play, and they both now synch perfectly.
Cheers

Just purchased my imac and logic studio...updated to the new lion programe cant get logic to open?

Just purchased my imac and uploaded the new free lion update...loaded up logic studio...and i can`t open it ?

Your Welcome...
There is no capacity within the Link for Registering... Well not to my knowledge anyway...
It is purely an Update...
I would Register First if you can...
If not do the Update and then Register...
Being New to Mac, here are some Links to help you forget the Windows way of doing things...
Enjoy...
Mac 101
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/ Switching from PC

Any differences in LP8 and Logic Studio..?

Hi Everybody: Now that I´ve started to understand that it will be the best for me learning the new Logic, in order to keep working....I wonder if I am in the Logic Pro 8 or Logic Studio domain....?
I am a Logic user since version 2.7 , I had the upgrades made on time too. But now, after I´ve pay $499 for this new stuff, coming from LP7....There is a little shadow in my mind...
I know it is too late, but I would like to know if there are any differences between them (I mean, LP8 vs. Logic Studio).
Thanks in advance

Well, Thanks you both. That´s what I though but since there are two discussions that point toward those two names, I desided to consult the experts.
I´ll keep trying to learn how to keep my work flow on those new windows and screensets.
Thanks a lot.

10.6.3 and Logic Studio

Will Logic Studio work fine over OS-X 10.6.3 ? How about Final Cut Studio? I'm in the process of buying these two titles for my mackbook pro which is already upgraded to 10.6.3 but I don't want to waste my money if it won't work...

Of course I've tried them both. I only comment on things I have tried myself. That way I avoid as much as possible sticking my foot in my mouth and wiggling my toes

Novation 47SL MKII and Logic Studio

I use a Novation 47MKII midi controller and I keep getting this error when going into Logic Studio 9 after working in Live 8. Any ideas why this would happen?
“Device “HUI” is assigned to MIDI Port “Automap HUI” which is not present.
Please ensure that all MIDI interfaces are connected and switched on. If this is the case, please check the MIDI port setting of device “HUI”. If this is correct, click “Reset All MIDI Drivers” in Preferences > MIDI > General."

I have the same issue with my ReMOTE ZeRO SL and have not been able to figure out how to have it keep the configuration. The setup guide works fine, but it doesn't maintain the MIDI configuration and I need to re-enter the environment settings each time I setup the system.

Educational License and Logic Studio Discs

Greetings,
I need to re-install Logic Studio at our College and have all the licenses for the iMac's, but only 2 sets of Logic Studios discs, but have 20+ Mac's to install Logic Studio on.
Obviously, doing a full Logic install (which is what we need) will take time on 20+ Mac's. I reckon I would only have time to install 4 a day with the 2 sets of discs.
Therefore, can I copy the original discs so I can install Logic simultaneously on all the Mac's?

If the machines are on all a network, it might be quicker just to image the disks and put the images on a server, and run that installer on each destination Mac.
But yes, you could just make temporary install only copies.

Final Cut and Logic Studio

I have a MacBook with:
Processor-2.1 GHz Intel Core Duo
Memory-1 GB 667 MHz DDR2 SDRAM
Question: A) Can I run Final Cut Studio 2 and/or Logic Studio
B) If not, will a timecapsule or mimi mac give me the power needed?

First of all, you'd need to install more RAM to run either program. Both programs require a MINIMUM of 1gb of RAM, so if you run either program, there'd be no RAM available for the OS or any background processes. So yes, it would slow your computer down to a crawl ... if not a crash.
There is no way to connect any Firewire device to the new MacBooks. So no FW control surfaces for Logic Studio and no way to connect a tape based camcorder or FW hard drive for external storage.
Motion and Color probably wouldn't even install due to the weak graphics card and shared RAM.
Also, keep in mind that Apple officially doesn't support FCS on the MacBook at all. Essentially, the MacBook is not designed for editing. But hey ... it's your money.
-DH

Guitar Rig and Logic Studio

Similar Messages

Maybe you are looking for