Guixt problem, sometimes it doesn't work

Hi SDN.
We use guixt on ESS screens in EP6 sp20.
As far as I remember the ITS is on pacth22.
My user experiense that sometimes guixt doesn't work, but just show the original screen. 5 minutes later it works again.
Ofcource it cannot be reproduced but happens now and then
Does anyone have a clue of what I should look for?
Thanks in advance
Peter

Hi Peter,
I would first download the latest version of guixt.dll and guixt.exe from synactive.com.
Then I would test it again.
Regards,
ScriptMan

Similar Messages

Weird problem: apple-F doesn't work in Finder anymore!

I've just noticed 2 really weird problems. When in Finder, hitting apple-F (to "Find") doesn't work - I see the File menu blink for a second but the window to search for files never comes up. Also (and perhaps related?), since the latest set of Apple upgrades, when I run iTunes, it doesn't see my library. The newest version runs, but never brings up its main window. The older version does bring out its window but my music doesn't appear there. What the heck is going on?!? Anyone have any suggestions? Thanks,
Mike

Well, first, the likely fix for your Command-F problem (and other problems you've probably been lucky enough not to stumble upon just yet) is to fix permissions. But you'll probably find you can't do that in the first place until you do the main fix discussed in that large thread.
Join the crew.
owen

LMS25 / Common Services 3.0 problem (dbpasswd.pl doesn't work)

Hi.
During CS3.0 installation I got an error:
ERROR: Unable to Change password for DSN cmf
ERROR: After install you can change the database password
ERROR: by running /opt/CSCOpx/bin/dbpasswd.pl
I tried to run /opt/CSCOpx/bin/dbpasswd.pl script, but got error again:
bash-2.03# /opt/CSCOpx/bin/dbpasswd.pl all
Please enter the new password for database cmf:
Please enter the new password again for verification:
INFO: Start changing password for database 'cmf'...
Starting database engine cmfEng
ld.so.1: perl: fatal: relocation error: file /opt/CSCOpx/objects/db/lib/libdblib9.so.1: symbol UnixForkProtection_Init: referenced symbol not found
Killed
I tried to set up LD_LIBRARY_PATH, tried to remove .profile, tried even to install solaris 8 from the scratch. It doesn't work even on fresh installation with 8_Recommended and all required Solaris patches. I tried also different installation disks with May 05 patches and without.
ldd doesn't show anything strange:
bash-2.03# ldd /opt/CSCOpx/objects/db/lib/libdblib9.so.1
libdbtasks9.so.1 => /opt/CSCOpx/objects/db/lib/libdbtasks9.so.1
librt.so.1 => /usr/lib/librt.so.1
libnsl.so.1 => /usr/lib/libnsl.so.1
libdl.so.1 => /usr/lib/libdl.so.1
libc.so.1 => /usr/lib/libc.so.1
libxnet.so.1 => /usr/lib/libxnet.so.1
libm.so.1 => /usr/lib/libm.so.1
libaio.so.1 => /usr/lib/libaio.so.1
libmp.so.2 => /usr/lib/libmp.so.2
/usr/platform/SUNW,Sun-Fire-V440/lib/libc_psr.so.1
libsocket.so.1 => /usr/lib/libsocket.so.1
bash-2.03#
We have same LMS 2.5 on another server ( same model, same operating system, same patches) and it looks fine.
Could somebody explain how to debug and solve this issue?

Hi.
Also /opt/CSCOpx/selftest/database.pl didn't work with same error message.
I found the cause of problem. I have reproduced this error in test environment. The problem was in 8_Recommended patch cluster for Solaris 8. Patch cluster downloaded in September doesn't cause any errors, but after new patch cluster installing ( late October) CiscoWorks stops working. The reason for it is 109147-39 patch ( linker patch for Solaris). Older version 109147-37 doesn't cause an error in database manipulation. It is enough to run roll back this patch and 2 patches depended on it ( 108652-92, 108773-19). So command "patchrm 108652-92;patchrm 108773-19;patchrm 109147-39" solves the problem.

FileXtra4 problem - default folder doesn't work.

Don't know why this doesn't work, but the default folder
setting in the
FileXtra open/save dialogues doesn't seem to work as
advertised. My code
goes like so:
currentLevel = fxObj.fx_FileOpenDialog(the moviePath &
"\Levels\","*.lvl","Load Level",False,True)
the moviePath & "\Levels\"
should be the correct folder, but instead, it always defaults
to My
Documents for some reason. (When running as a projector. In
Authoring
mode, it defaults to the moviePath, but ignores my
sub-folder.) Either way,
it never gets it right the first time. The second time and
subsequent
times, it always goes to wherever you last opened something,
but the first
time is always wrong. I did notice that the example in their
documentation:
put fxObj.fx_FileOpenDialog("C:\My Documents\", "Text
Files/*.TXT","Choose a
text file", True, True)
does use My Documents as its default, but I've changed that,
so it should be
going to the folder I pointed it at.

Without looking too deeply, I think I remember that, yes, it
doesn't work.
I usually end up using BuddyAPI for this.
Craig
"Darrel Hoffman" <[email protected]> wrote in message
news:fm362a$ep7$[email protected]..
> Don't know why this doesn't work, but the default folder
setting in the
> FileXtra open/save dialogues doesn't seem to work as
advertised. My code
> goes like so:
>
> currentLevel = fxObj.fx_FileOpenDialog(the moviePath
> "\Levels\","*.lvl","Load Level",False,True)
>
> the moviePath & "\Levels\"
> should be the correct folder, but instead, it always
defaults to My
> Documents for some reason. (When running as a projector.
In Authoring
> mode, it defaults to the moviePath, but ignores my
sub-folder.) Either
> way, it never gets it right the first time. The second
time and
> subsequent times, it always goes to wherever you last
opened something,
> but the first time is always wrong. I did notice that
the example in
> their documentation:
>
> put fxObj.fx_FileOpenDialog("C:\My Documents\", "Text
Files/*.TXT","Choose
> a text file", True, True)
>
> does use My Documents as its default, but I've changed
that, so it should
> be going to the folder I pointed it at.
>

Problem with SN doesn't work

Hello I format my computer but don't disable my SN for lightroom.
And now it doesn't work.
The information what i found is : ask an support. for disable the SN
Thanks for your help
PS: sorry for my english, I speak usually in french.

I have got one word for you: Beta.
SAFARI IS A BETA TESTING APPLICATION, NOT FOR GENERAL USE. Apple decided that they would pre-release Safari for Windows so as to openly test the product. IT IS NOT, I will repeat, NOT FOR GENERAL USE.
So stop complaining and go back to FF for a few weeks while all of the muck gets sorted out, okay?

A big problem: camera roll doesn't work

I cannot use the default "camera" to take photo. When I press the "taking photo" button or "volume + " button, the "camera" app would turn off and as a result return to the background.
I cannot really delete the photos in the camera roll as well. When I delete a photo in camera roll, it temporarily can. But when I close the "camera roll" and open again, the deleted photo appears again.
I cannot use ("power button" + "home button") to capture the screen as the screen picture captured will not appear in the camera roll.
I tried to turn the phone off and turn it on again, but the problem is still there.
In the "setting" --> "General" --> "About my phone", under "video" and "photo" categories, Normally, they would display the numbers which states respectively how many videos and photos that I have in my camera roll. But now they both display "2,147,483,647".
Before, I have connected the phone to the computer using USB wire in order to import the photos from the phone to the computer. I don't know whether this caused the problem.
How can I fix it? Please help.
Can restoration help? I used iCould to backup. Can I restore all the data and setting, including all the data in all the apps ?
THANKS!!!!
PS: I am using iPhone 4 and iOS 5.

Your Camera Roll is corrupted. I don't know why or how, but if you can't delete any photos from it and it doesn't import photos via the cable about the only thing you can do is restore the phone.

Wireless problem - WEP password doesn't work - connection timed out

The problems with leopard connecting to wireless networks is documented all over the forums
But anyway, below is a solution from fred (Genius!!) it comes from
http://forums.macrumors.com/archive/index.php/t-375266.html
You have to do this through SAFARI (then for me camino worked perfectly as well)
1. When you awaken Leopard you get the "None of your preferred networks are available" message.
Cancel it.
2. Ask Safari to open any page. It will, of course, hang with the message "You are not connected to the Internet."
Click on the "Network Diagnostics..." button in the message box.
3. You should get a dialog box titled "Network Diagnostics". The list of "locations" should have the name of your usual network setup highlighted in gray. All the network status signals down the left side will be red.
Click on the "Continue" button in the dialog box.
4. You should see a fresh Network Diagnostics box subtitled "Choose network port configuration"
Click on the AirPort radio button.
Then click on continue.
5. The Network Diagnostics box should be refreshed. You should now see "Select AirPort network" as a subtitle, and one or more wireless network names listed.
Click on your wireless network name (the one your AirPort knows).
Click the Continue button.
6. Type your password in the Password box in the next refresh. (No need for a $. Just your password.) (Don't bother checking the Remember password... box. It seems non-functional.)
7. Click the Continue button.
8. The Network Fairy awakens, makes all the status signals on the left green, turns on your wireless signal strength icon in the top bar, loads your Safari page, and leaves you with the message: "Your Internet connection appears to be working correctly."
9. Beats me why the "other" WEP password entry process consistently fails.
Fred

I must have missed something the first time around with the G3....
I changed the encryption to WPA/WPA2 Personal and all my Expresses AND my G3 iBooks all connect just fine. I still can't get my iPaq 2495b to connect however... It "sees" the router, but just wont connect. As I mentioned before, it does connect if unencrypted with no password, so the problem obviously lies with the password.
The iPaq Authentication choices are: Open,Shared, WPA, and WPA-PSK. There is a second box for Data Encryption with choices of: WEP or TKIP.
I have tried every combination, all to no avail. I have NOT tried stuff like inserting "$" signs, etc.
Any ideas?

Find Command sometimes just doesn't work

Sometimes when I type into the input field in the Find function, nothing at all happens after I press Enter.
If I exit Lightroom, then restart it, the Find function will work OK.
I am running the Windows version 1.0 on a 3.01 Pentium 4, Win XP, which runs PS CS3 OK.
Stan

Hi Bob,
It works for me.
Find will only search in selected calendars. Do you have the relevant calendars checked in the calendar list? (you can select all calendars by Command-Clicking one checkbox)
Best wishes
John M

Big problem-iPod setup doesn't work

I just got a replacement iPod cause my other one got jacked up, and everytime I try to set-up my iPod so my computer will recognize it, the setup restarts my computer to continue the setup and then when it comes back on, the set-up never continues. This didn't happen the past two times I had new iPods I don't get it!!

Yeah I have had the exact same problem with all three of my ipods (have had to send it back twice for different problems). How I eventually get it to work is install Itunes without attaching the ipod (once it formats for windows and then re-starts again) and then go through the rest of the setup without it being attached. After the software is installed I use the updater which refomats the ipod and the Itunes usually recognizes the Ipod. It's so weird though as I just got my new one last night and I am going through this whole stupid thing again. My computer re-starts as soon as it beeps to signify the ipod being attached. Drives me insane! Don't know if that will help and we should not have to do this. I have had this problem from the moment I tried to install my first one.

CTXCAT index problem: SUBSTRING_INDEX parameter doesn't work

Hi,
I need a help with ctxcat index on Oracle 10g. I need to improve searching using CTXCAT index. All is working quite well except SUBSTRING_INDEX parameter. I thought that following was necessary and sufficient:
EXEC ctx_ddl.create_preference('KEVFT_WL', 'BASIC_WORDLIST');
EXEC ctx_ddl.set_attribute('KEVFT_WL', 'substring_index', 'YES');
EXEC ctx_ddl.set_attribute('KEVFT_WL', 'prefix_index', 'YES');
EXEC ctx_ddl.set_attribute('KEVFT_WL', 'prefix_min_length', 1);
EXEC ctx_ddl.set_attribute('KEVFT_WL', 'prefix_max_length', 6);
This BASIC_WORDLIST preference set is used for index creation. But the problem is, that when I try to search using query:
SELECT * FROM TMP_FULLTEXT
WHERE CATSEARCH(fulltext, '%abc', null)> 0;
then I get no rows in results. Despite the fact that row with the text 'aabc' exists in the table.
Can anyone tell me what the problem is?
Thank you,
Julius Chrobak

With a catsearch query operator, the wildcard is an asterisk (*), not a percent sign (%) as with a contains query operator. However, even with the correct wildcard, left truncation is not supported with ctxcat. However, if you use a query template, then you can use the context grammar with the % wildcard for context grammar and left truncation is supported. Please see the demonstration below that reproduces the problem, then corrects it.
SCOTT@10gXE> SELECT * FROM v$version
2 /
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE     10.2.0.1.0     Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SCOTT@10gXE> CREATE TABLE tmp_fulltext (fulltext VARCHAR2 (30))
2 /
Table created.
SCOTT@10gXE> INSERT ALL
2 INTO tmp_fulltext VALUES ('aabc')
3 INTO tmp_fulltext VALUES ('abcd')
4 SELECT * FROM DUAL
5 /
2 rows created.
SCOTT@10gXE> BEGIN
2    ctx_ddl.create_preference ('KEVFT_WL', 'BASIC_WORDLIST');
3    ctx_ddl.set_attribute      ('KEVFT_WL', 'substring_index',   'YES');
4    ctx_ddl.set_attribute      ('KEVFT_WL', 'prefix_index',        'YES');
5    ctx_ddl.set_attribute      ('KEVFT_WL', 'prefix_min_length', 1);
6    ctx_ddl.set_attribute      ('KEVFT_WL', 'prefix_max_length', 6);
7 END;
8 /
PL/SQL procedure successfully completed.
SCOTT@10gXE> CREATE INDEX fulltext_idx ON tmp_fulltext (fulltext)
2 INDEXTYPE IS CTXSYS.CTXCAT
3 PARAMETERS ('WORDLIST KEVFT_WL')
4 /
Index created.
SCOTT@10gXE> -- reproduction of original problem using wrong wildcard for catsearch:
SCOTT@10gXE> SELECT * FROM TMP_FULLTEXT
2 WHERE CATSEARCH (fulltext, '%abc', null) > 0
3 /
no rows selected
SCOTT@10gXE> SELECT * FROM TMP_FULLTEXT
2 WHERE CATSEARCH (fulltext, 'abc%', null) > 0
3 /
no rows selected
SCOTT@10gXE> -- left truncation not supported, even with correct wildcard:
SCOTT@10gXE> SELECT * FROM TMP_FULLTEXT
2 WHERE CATSEARCH (fulltext, '*abc', null) > 0
3 /
no rows selected
SCOTT@10gXE> SELECT * FROM TMP_FULLTEXT
2 WHERE CATSEARCH (fulltext, 'abc*', null) > 0
3 /
FULLTEXT
abcd
SCOTT@10gXE> -- query using template with context grammar:
SCOTT@10gXE> SELECT * FROM TMP_FULLTEXT
2 WHERE CATSEARCH
3           (fulltext,
4            '<query>
5            <textquery grammar="context">
6              %abc
7            </textquery>
8             <query>',
9            null) > 0
10 /
FULLTEXT
aabc
SCOTT@10gXE>

LV 6.1, 3D Surface Graph sometimes collapses (doesn't work stably); plus blocks use of remotely controlled panel by LV run-time engine (error #26:"window.cpp", line 11518

1) "3D Surface Graph" does not work stably; sometimes it changes its properties (e.g. plot style) without me doing anything prior to that; a couple of times it lost a complete sense so that I had to delete the graph and install it again
2) I tried to remotely run a VI which contains a 3D Surface Graph in it. It turns out, the use of the "3D Surface Graph" somehow blocks the remote control over the panel. As a result of that, I got the following error message: Error #26: "window.cpp", line 11518 (with LabVIEW version 6.1).
3) Is it possible to plug into the 3D Surface Graph a few plots at
the same time since there is a built-in control "plot number" (somehow by bundling them up or putting into an array - I tried both but didn't work) or it can be done merely by use of 'case' structure preceding the Graph, where case structure decides which plot to pass into the 3D graph?
Attachments:
3D_Graph_ver_1.bmp ‏214 KB

Hello mjoler,
Thank you for contacting National Instruments.
The following example will show you how to plot multiple 3D plots on a single 3D graph. Modeling your VI after the example may also alleviate the instability that you have been experiencing.
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B123AE0CBA19111EE034080020E74861&p_node=DZ52038
As far as the error you are receiving, it's difficult to say what could be causing this. ActiveX controls embedded on a front panel sometimes do not display on a remote client because they draw and operate almost completely independent of LabVIEW. If possible, try remotely controlling your VI with a client computer that has a complete installation of LabVIEW. The error could also be a bu
g. Try downloading the evaluation version of LabVIEW 7.0 from http://www.ni.com/labview. By doing this, we can determine if it is a bug in the older version that has been fixed in the latest version.
Let me know how this goes.
Matthew C
Applications Engineer
National Instruments

LR Enfuse Problem - Batch Processing Doesn't work

Hi,
I'm relativley new to Lightroom - and am trying to learn about Enfusing multiple different exposures.
I've followed all the instructions to the letter, and I'm able to enfuse great looking shots if I do them 1 group at a time. However, I've taken heaps of bracketed shots, and want to 'Batch Process' them.
LR/Enfuse appears to have the functionality, and plenty of people online seem to be able to make it work. But even when I stack each bracketed shot, and select all. It still comes up with the error message below:
"No Stacks
No Stacks containing selected photos were found. If you are trying to blend the selected images then please turn off the batch mode option."
Any ideas? I'm using Lightroom 5.2
Cheers, Thomas

Hi,
I am not sure what operating system you are using, I don't have any problems with Win 7 x64, but if you are using Apple OS there may be issues with permissions on the folders you are using e.g. the folder for temporary files.
You may also want to look at his tutorial http://digital-photography-school.com/save-time-with-batch-exposure-blending but disregard the Auto Stacking explained as it is difficult to get it to work.
I am not sure but it looks as though the stacks in the image you posted are expanded. Make sure the individual stacks are collapsed.
Apart from that I just don't know as it works fine for me.

IPad 16GB screen problem. Screen doesn't work as it should.

Dear all, I would like to share with my issue. I got an IPad as a gift and started to use it... My happiness last one hour as after that on my eyes the screen started to show picture in green color and as if you watch TV with bad antenna. I would be happy to get this device back to the store, but there's a small issue. I'm located in Russia and to send it back to the store would be not easy. I wonder if I'm the only unlucky man with such a problem and are there any ideas if it is hardware or software problem. I assume it looks like bad connection between screen and main board... I made a video with my cell, but the quality is not as good. this is the link http://www.youtube.com/watch?v=kbk1enRFISY/watch?v=kbk1enRFISY
Please help! I would love to solve this issue ASAP. Maybe there's the way to test IPad hardware in a special mode...
Thanks!

I bought two iPads one week ago in Orlando Florida. I have been using one of them for a week with no problem. Last Sunday I return to my country (Argentina) and when I tried to sync my iPad with itunes, it was imposible. Tried everything but nothing happend. I think the usb internal chip of my ipad has a failure. Then I connect my other iPad. it worked fine for 20 minutes, and then i noticed the screen issue that you talk about. So I have two new iPads and both with technical failure. I am very dissapointed. The big problem is that I don't live in USA. So, what should i do??? Please, tell me if you find a way to get the iPad repaired. Thanks!

Sat L20-217: Sometimes keyboard doesn't work

Hi
It is about 3 days that I am having a problem with my satellite L20-217 keyboard.
When I right it miss some characters in a sentence.
Like when I want to write Toshiba it suddenly doesnt type the T, so I will have oshiba. It is not with a specific key, it just happens in the middle of typing with any key even space or backspace.
Please help.
Thank you

I don't know about that Konfabulator.
In principle, additional software may cause that, try the FilterKeys accessibility option in Windows for example.
But I have the same problem with a new Satellite M60. It eats keys pressed briefly. So I try typing slowly and firmly.
An external USB keyboard works OK.
This does not occur on an older Toshiba Satellite 3000 with a keyboard that looks similar.
Did your keyboard work well previously?

We have a MIFI 551OL-956F It won't stay connected to the internet. Anything we can do to correct this. Tired of being in middle of transaction and have to sign of and restart and sometimes that doesn't work.

Is there anything we can do to keep our internet signal? Tired of being disconnected. Just switch to this in December/January.

First thing we would need to do is determine if the problem is with the local WiFi or with the VZW towers. There are a few isolation tests that could help us figure that out.
For example to test local WiFi you would need to take a look at your local airwaves. There are many free WiFi analyzer applications such as WiFi analyzer for Android. Fire up one of these guys and watch the air for a while to determine what may be going on. 2.4 Ghz has a very limited number of non-overlapping channels which are ideal to be on, if you are in an apartment or have many neighbor signals near by then 5.0 Ghz is certainly worth a shot.
To test the VZW towers you would have to travel to a different area for a while and compare your results. For example test directly outside your home or in a different area of your town. If you happen to travel out of town then test at your destination when a different tower can be used. Something that can assist you here is called a site survey.
More info on Site Surveys:
http://3gstore.com/page/13_will_an_antenna_help_me.html
If no progress can be made in either of these areas then there's a chance the Jetpack is bad and would need to be replaced. One thing is for sure the more leg work you do on your own before calling VZW the quicker you will flow through their troubleshooting and arrive at an acceptable solution.

Guixt problem, sometimes it doesn't work

Similar Messages

Maybe you are looking for