Gunzip crc error

Hi all,
i downloaded the "Oracle9iAS Enterprise Edition for Linux" from http://otn.oracle.com/software/products/ias/htdocs/linuxsoft.html but i cannot gunzip the 4th file.
# du -b linux_iasv90201_Disk4.cpio.gz
32258630 linux_iasv90201_Disk4.cpio.gz (okay)
# gunzip linux_iasv90201_Disk4.cpio.gz
gunzip: linux_iasv90201_Disk4.cpio.gz: invalid compressed data--crc error
Could somebody verify this?
Thanks,
Andre'

Check out the following post where there is some helpful information down the page: download 9i Linux files
OTN

Similar Messages

Gunzip: ship_mac_client.cpio.gz: invalid compressed data--crc error

I have now downloaded 10g Mac client 3 times from here:
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/macsoft.html
Oracle Database 10g Client Release 1 (10.1.0.3) for Apple Mac OS X
ship_mac_client.cpio.gz (344,013,902 bytes) (cksum - 3052329470)
The file size is correct but I get this error:
gunzip: ship_mac_client.cpio.gz: invalid compressed data--crc error
am i doing something wrong or is the file corrupt on the server?

File size does not provide a reliable means for detecting file corruption. Verify the downloaded file's checksum by running:
cksum <filename>If this value differs from the cksum value appearing on the download page (3052329470), then your file cannot match Oracle's. If the values match, then your file almost certainly matches Oracle's. Matching cksum values does not rule out the possibility of your having successfully downloaded a corrupt file from Oracle. (In other words, their cksum value was computed against a corrupt file.)
Hope this helps,
Eric Adamson
Lansing, Michigan

Gunzip of ALL Oracle .gz files for linux gives crc error

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name - http://download.oracle.com/otn/linux/oracle9i/9201 and http://download.roacle.com/otn/linux/ias/9ias/902
- Filename - lnx_920_disk1.cpio.gz to pick one. lnx_920_disk[123].cpio.gz, lnx_iasv20_disk[1234].cpio.gz, Oracle9iAS_Rel2_Interop_Patch_Linux.cpio.gz, and 9iAS_902_Integration_LINUX.cpio.gz to be complete
- Date/Time - multple times - last attempt evening of 7/5/02 and morning of 7/6/02
- Browser + Version - Mozilla 0.9.2.1
- O/S + Version - Fresh install of Red Hat 7.2
- Error Msg - gunzip: lnx_920_disk1.cpio.gz: invalid compressed data--crc error, gunzip: lnx_920_disk1.cpio.gz: invalid compressed data--length error
gunzip continues to fail with "crc error" even after downloading all the files multiple times. Each time the size is correct to the other downloads and the the size stated on the web site. No error was received during the download process. The problem appears to be with the file on the server. I realize that Linux is not a big market for Oracle, but some assistance in trying to fix this would be appreciated.
Problems also exist with 9.0.2iDS_LINUX.cpio
cpio -icd < 9.0.2iDS_Linux.cpio results in cpio: premature end of file
The .zip, .jar, and .sh files are fine.
Thank you,
Jeremy

Kyle, try testing to see what type of files they really are. eg. file <file name>. I had a similar problem, it turns out that they are cpio format not gzip. You should be able to extract the cpio archive using "cpio -idmvI /mnt/cdrom/Linux9i_Disk1.cpio.gz"
Good Luck

Invalid compressed data--crc error (RHEL ES 3.0)

Hi,
i have downloaded from the Oracle Server these archive: ship.db.lnx32.cpio.gz
in order to install Oracle Database 10g Release 1 (10.1.0.3) on a Red Hat Enterprise Linux (ES) 3.0 server, but when i tried to uncompress (with gunzip) the archive ship.db.lnx32.cpio.gz, i receive these error: "invalid compressed data--crc error".
so, please can you tell me what is the problem exactly. because, i have downloaded four times !!! but the problem didn't change.
Thanks

This is what I got when I ran cksum:
$ chsum ship.db.lnx32.cpio.gz
405751305 649170233 ship.db.lnx32.cpio.gz
as you can see it does not equal 1778052285, so does that mean I have to dl keep downloading the file till i get the correct cksum?
This is just a dev system so it has only 32MB, is that a problem? Do I have to have 256MB?
Thanks.

CRC error when uncompress the gtz file

I downloaded the 9 files of Oracle 8i for Linux, then concated
them together. But everytime when I tried to gunzip it or tar
it, I got this Incorrect Compressed Data - CRC Error. I thought
the problem was with the downloading, so I downloaded the files
again, but the problem still occurs.
Anybody knows how to fix this problem?
Thanks a lot
null

Chun (guest) wrote:
: I downloaded the 9 files of Oracle 8i for Linux, then concated
: them together. But everytime when I tried to gunzip it or tar
: it, I got this Incorrect Compressed Data - CRC Error. I
thought
: the problem was with the downloading, so I downloaded the
files
: again, but the problem still occurs.
: Anybody knows how to fix this problem?
: Thanks a lot
There is no way but download the files again.
As far as I know, you do that again.
null

Input and CRC errors on ASA 5505 outside interface

All,
I see input and crc errors on my ASA 5505 eth0/0(outside) interface and packet drops. There is very slow connection though we have 20mb line. ISP also sees the issue on the Lan interface side. We have the speed and duplex configured same on both ISP and our end.
I am suspecting if this is Physical cable issue. Please suggest.
Hardware is 88E6095, BW 100 Mbps, DLY 100 usec
        Full-Duplex(Full-duplex), 100 Mbps(100 Mbps)
        Input flow control is unsupported, output flow control is unsupported
        Available but not configured via nameif
        MAC address 001a.b4c9.f3d9, MTU not set
        IP address unassigned
        158138067 packets input, 141061681082 bytes, 0 no buffer
        Received 183037 broadcasts, 0 runts, 0 giants
        19642 input errors, 19642 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
        0 pause input, 0 resume input
        0 L2 decode drops
        144684 switch ingress policy drops
        124291353 packets output, 38197278051 bytes, 0 underruns
        0 pause output, 0 resume output
        0 output errors, 0 collisions, 0 interface resets
        0 late collisions, 0 deferred
        0 rate limit drops
        0 switch egress policy drops
        0 input reset drops, 0 output reset drops

Hello Ravi,
This kind of issues CRCs/ Input Errors are tipically known as L1 issues so make sure you check the cable and if that does not make a difference change the port on each side to see if there is a difference.
Unfortunetly the ASA does not support the Time-Domain Reflectometer feature so we must do the test of L1 by ourselfs.
Can you clear the counters of the interface, test the changes provided and provide us some feedback?
Looking for some Networking Assistance?
Contact me directly at [email protected]
I will fix your problem ASAP.
Cheers,
Julio Carvajal Segura
http://laguiadelnetworking.com

Crc error in download of OBIEE 11g

I'm trying to get OBIEE 11g installed, but sadly one of the files i want to download keeps saying it is corrupt.
http://download.oracle.com/otn/nt/bi/111130/bi_windows_x86_111130_32_disk1_2of2.zip gives a crc-error when extracting it. I tried downloading it multiple times using different browsers/computers but no luck.
Do more people experience this or does anybody know a solution for this. A mirror to download the file from works fine for me too. Disk 1 file 1 of 2, and both files from disk 2 download and extract just fine.
thnx for helping.

Hi,
We have downloaded the files without any corruption,sometimes it happens due to internet connectivity.
Follow this link for download and installation http://onlineappsdba.com/index.php/2010/08/14/obiee-11g-111130-documentation-installation/
Hope helps you.Mark points.
Cheers,
KK

Bad CRC error when install WebLogic Server 9.2 on Itanium platform.

I download the install image according below steps:
1. Go to the BEA download site a http://commerce.bea.com.
2. Click on the link for Bea WebLogic.
3. Click on the link for WebLogic Server 9.2.
From the list of OS Platforms, select Novell SUSE Linux Enterprise Server (9, Itanium).
4. Download the server920_linux64.bin binary installer.
Then I try to install on my Itanium box, bad CRC errors occured as below output messages:
juggernaut:/opt/wls-j2/image # ./server920_linuxia64.bin
Extracting 0%./tmp//fileZeI8cc/jrockit-jre1.5.0_04/lib/charsets.jar bad CRC c453bc6d (should be 5a4ab10f)
............/tmp//fileZeI8cc/jrockit-jre1.5.0_04/lib/rt.jar bad CRC 0f42e0de (should be ce1d9aff)
/tmp//fileZeI8cc/bids.jar bad CRC c79d217d (should be dc406837)
/tmp//fileZeI8cc/comdev.jar bad CRC 55cee4be (should be bce80f3d)
./tmp//fileZeI8cc/wizard.jar bad CRC 54069bdc (should be c6327edd)
../tmp//fileZeI8cc/linux_ia64_jrockit90_150_04_jdk.zip bad CRC b70b8a17 (should be 52ff2ba4)
........./tmp//fileZeI8cc/linux_ia64_jrockit90_150_04_jrockit.zip bad CRC 406b75ed (should be 4f913183)
.............................../tmp//fileZeI8cc/wls9200server_75_COMP_linux64en.jar bad CRC 2bc35275 (should be fe2bcb26)
../tmp//fileZeI8cc/wls9200examples_75_COMP_linux64en.jar bad CRC cdb78916 (should be cf255dc9)
......../tmp//fileZeI8cc/wls9200plugins_75_COMP_linux64en.jar bad CRC 49e4694b (should be 0b135269)
................................./tmp//fileZeI8cc/wlw9200app_75_COMP_linux64en.jar bad CRC fbcdda1a (should be 56d31118)
100%
** Error during extraction, error code = 2.
Here is my box configurations:
Disk configuration:
juggernaut:/opt/wls-j2/image # df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda3 35002316 4454504 30547812 13% /
tmpfs 2019488 48 2019440 1% /dev/shm
/dev/sda1 205587 6587 199000 4% /boot/efi
RAM configuration:
juggernaut:/opt/wls-j2/image # vmstat
procs -----------memory---------- ---swap-- -----io---- system ----cpu----
r b swpd free buff cache si so bi bo in cs us sy id wa
0 0 0 1798832 114224 1855424 0 0 3 20 6 0 0 0 100 0
Kernel:
Linux juggernaut 2.6.5-7.244-default #1 SMP Mon Dec 12 18:32:25 UTC 2005 ia64 ia64 ia64 GNU/Linux
By the way, I ftp the image via binary model.
I've no idea about the errors, any help will be greatly appreciated, thks a million in advance!

Hi,
I had come up with this issue twice, once I download WL from a server from Asia, and had this issue. I just download once again from the server at US, and the issue was gone. The second time it was a weird anti virus configuration that tried to scan the file while the installation was taking place (I do not think this last one applies here.)
Regards,
LG

Download a zip file with gui_download = CRC error

Hello erverybody,
I download a zip compressed file with gui_download (cl_gui_interface_services) in binary mode.
When I try to open it, I have a crc error. Does anybody has any idea why?
here the code:
       TYPES: begin of t_zip,
             text(1024) type c,
             end of t_zip.
      DATA: itab_zip type table of t_zip,
            wa_zip type t_zip.
      OPEN DATASET p_fileon IN BINARY MODE FOR INPUT.
      IF sy-subrc <> 0.
        MESSAGE text-e01 TYPE 'E'.
      ENDIF.
      DO.
        READ DATASET p_fileon INTO wa_zip MAXIMUM LENGTH 1024.
        APPEND wa_zip TO itab_zip.
        IF sy-subrc <> 0.
          EXIT.
        ENDIF.
      ENDDO.
      CLOSE DATASET p_fileon.
      MOVE p_filedw TO filename.
      CALL METHOD cl_gui_frontend_services=>gui_download
        EXPORTING
          filename                  = filename
          FILETYPE                  = 'BIN'
        CHANGING
          data_tab                  = itab_zip
Thanks
Joachim

Hi Joachim,
1. use this code (just copy paste in new program)
2. It will download from SERVER to front-end.
3.
*& Report YBCR_FILEDOWNLOAD                                           *
REPORT ybcr_filedownload                       .
DATA
DATA : file_name TYPE string.
DATA : BEGIN OF itab OCCURS 0,
       ln(255) TYPE c,
       END OF itab.
SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : appfn(150) TYPE c LOWER CASE OBLIGATORY.
PARAMETERS : p_file LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
    IMPORTING
      file_name = p_file.
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
OPEN DATASET appfn FOR INPUT IN TEXT MODE ENCODING DEFAULT .
IF sy-subrc <> 0.
    MESSAGE s999(yhr) WITH 'COULD NOT OPEN FILE ON APP SERVER'.
    LEAVE LIST-PROCESSING.
ENDIF.
DO.
    READ DATASET appfn INTO itab.
    IF sy-subrc = 0.
      APPEND itab.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
file_name = p_file.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
BIN_FILESIZE                    =
      filename                        = file_name
FILETYPE                        = 'ASC'
APPEND                          = ' '
WRITE_FIELD_SEPARATOR           = ' '
HEADER                          = '00'
TRUNC_TRAILING_BLANKS           = ' '
WRITE_LF                        = 'X'
COL_SELECT                      = ' '
COL_SELECT_MASK                 = ' '
DAT_MODE                        = ' '
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = ' '
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
WK1_N_FORMAT                    = ' '
WK1_N_SIZE                      = ' '
WK1_T_FORMAT                    = ' '
WK1_T_SIZE                      = ' '
IMPORTING
FILELENGTH                      =
    TABLES
      data_tab                        = itab
FIELDNAMES                      =
EXCEPTIONS
FILE_WRITE_ERROR                = 1
NO_BATCH                        = 2
GUI_REFUSE_FILETRANSFER         = 3
INVALID_TYPE                    = 4
NO_AUTHORITY                    = 5
UNKNOWN_ERROR                   = 6
HEADER_NOT_ALLOWED              = 7
SEPARATOR_NOT_ALLOWED           = 8
FILESIZE_NOT_ALLOWED            = 9
HEADER_TOO_LONG                 = 10
DP_ERROR_CREATE                 = 11
DP_ERROR_SEND                   = 12
DP_ERROR_WRITE                  = 13
UNKNOWN_DP_ERROR                = 14
ACCESS_DENIED                   = 15
DP_OUT_OF_MEMORY                = 16
DISK_FULL                       = 17
DP_TIMEOUT                      = 18
FILE_NOT_FOUND                  = 19
DATAPROVIDER_EXCEPTION          = 20
CONTROL_FLUSH_ERROR             = 21
OTHERS                          = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
regards,
amit m.

CRC Error on installing 10.2.0.1 on Linux

I've downloaded the 10.2.0.1 full Grid version for Linux and tried to install it
on Oracle's Enterprise Linux....
I keep getting a CRC error on disk 2....has anyone else seen this ?
Thanks
Bernard

Well if you've tried it more than once, then there is no point retrying it.
I've seen this happen in the past and redownloading it worked...but may be it's a bad copy online.
Let' see if someone else has seen this error...

How do HDD CRC errors manifest?

I have a KT4V motherboard and I wanna know how do HDD CRC errors manifest? I have problems with my computer locking up and I wanna know if this is due to a CRC error or I must look elsewhere for the solution.
I have BIOS version 1.7.

For what i know, the Kt4V seemed to be plagued with CRC errors.. If i remember right, BIOS V1.7 is suppose be correcting this problem.. This sorts of errors also might be caused by defective memory and in some very rare incedents with bend IDE cables.. What kind of memory are u using.. Kingston value RAM works the best with this board..
regards

KT4V crc errors

hi there!
i have crc errors in my system,i read that a bios update will fix the problem
my system usually reboots when i ripping a dvd or moving files or i watch a dvd movie!
suddenly the screen becomes blue and the system rebooting...
i would like to ask if this is problem of the mainboard an if i can fix it with bios update
thank you!
amd athlon 2000 xp + box
m/b msi kt4v
h/d wd 40gb
vga gf4 mx440
ddr512(333mhz)
pioneer dvd-rom

I have no idea if this will work or is even related, but try this. First, you must be using Windows Xp, I do not know how to do this it you are not using it, but if you are, go to the my computer icon and right click it on the desktop, then go to the Advanced tab and under Startup And Recovery, hit Settings. Under System Failure, uncheck the Automatically Restart option. Hope that helps and read the "What's this?" help for the setting.

Weblogic Server 8.1 for japanese lang install comes out with CRC error

We are trying to install the evalution copy of weblogic 8.1 sp1 Japanese. During extraction it comesout with following error.
Extracting 0%........../mizrwsdv/weblogic/tmp //aaabIaiHU/jre141_03/lib/font.properties.UTF8.5.6 ba
d CRC d4bf6e9f (should be 47f91f38)
..........................................................................................100%
** Error during extraction, error code = 2.
Any solution for this?
Regards
Jey

Did it complete or abort at that error?
It appears to be just a font file; it the installation completed, you might be able to
ignore this. If more CRC errors occur, the download might be corrupted.
Wayne Scott
Jeyaraj wrote:
We are trying to install the evalution copy of weblogic 8.1 sp1 Japanese. During extraction it comesout with following error.
Extracting 0%........../mizrwsdv/weblogic/tmp //aaabIaiHU/jre141_03/lib/font.properties.UTF8.5.6 ba
d CRC d4bf6e9f (should be 47f91f38)
..........................................................................................100%
** Error during extraction, error code = 2.
Any solution for this?
Regards
Jey

Crc error on oracle 9i for NT

after downloading disk1, file sizes do not match posted size and on extraction by WINZIP I get a crc error. Is this a download problem or a strange unzip problem or a glitch in the way the files were zipped?

the same problem I have encounter while downloading personal oracle 9i for windows98.

Why I get CRC error when copying outlook.ost file?

My workstation is using NTFS, Outlook 2007 with Exchange 2007 server.
My outlook.ost file is 1.7GB.
As my Outlook runs into problem, I tried to copy the outlook.ost file to another location for repair, but I keep getting CRC errors and the file was not copied.
I also tried to use winrar to compress it and it runs into the same CRC error.
Q#1. What causes this CRC error? hard disk error or software?
Q#2. How to repair such CRC error?
Thanks.

Hi Peter,
The cyclic redundancy check, or “CRC” error, indicates a bad spot/corruptions within the file that you are trying to copy and in lot of cases with your hard disk.
To make sure if the problem is with the .ost file or your hard disk, you can fire up a Command Prompt window, and then copy the file to NUL:
C:>CD (path of your .ost file)
C:(path of your .ost file)>copy name.ost NUL
If this succeeds, the problem is with your .ost file. If this fails, it should be a hardware based disk issues.
If it's an issue with your .ost file, I'd suggest to run
scanpst.exe tool to repair your data file, then check if this fixed it.
When the issue is hardware based, you probably need to find Disk Errors in the System log of your Event Viewer. You can access the Event Viewer by going to:
Control Panel-> Administrative Tools-> Event Viewer
By the way, .ost file is actually a local copy of your mail items on the server. For a corrupted .ost file, you actually don't need to "copy the outlook.ost file to another location for repair". You can simply rename it to .ost.old
or delete it, and then re-launch Outlook to let it generate a new .ost file from server.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Gunzip crc error

Similar Messages

Maybe you are looking for