GURUS-----How can any one proof he is a RAC expert

Hi,
In my recent interview with one of the top company they asked me "ARE YOU A RAC EXPERT" person who interviewd me was claiming he is an RAC expert.
How can I proof that I am a RAC expert.
If I know RAC installation on AIX/HP-UX/SUN and have good knowledge of RAC archicuture.
There is no certification for RAC also.
Thanks in advance.
Regards
MMU

First, I never proclaim myself an expert in anything. I always respond that while I may know a lot about a particular subject, it is up to others to label someone an expert or not. Then I state that while I may know a lot, there's always new technology to learn.
I think too many people self-proclaim themselves to be experts, when in reality, they are either more on the advanced or intermediate level. Proclaiming yourself an expert means you think you know all there is to know, and if you then answer a question incorrectly (or don't know an answer), you've suddenly disqualified yourself.

Similar Messages

  • Can any one know how do restrict that fields in mm

    hi gurus
    can any one know how do we restrict the fields in the material master.  Where do we control  do any one know the transaction code for that.
    Thanks in advance

    OMSR
    and
    OMS9
    Help for OMSR
    Assign Fields to Field Selection Groups
    To define whether a field is hidden or displayed, or whether an entry is mandatory or optional in material master maintenance, you must assign the field to a field selection group. You may assign a field to one field selection group only.
    Before including customer-defined fields in a field selection group together with standard fields, or assigning standard fields to a different field selection group, familiarize yourself with the assignment of fields to field selection groups in the standard R/3 System.
    Standard settings
    The values of the field selection groups have been preassigned as follows:
    001-110 Material master for industry
    111-120 Reserved for customers (except where the values are already in use)
    121-150 Material master for industry
    151-210 Material master for retail
    211-240 Reserved for customers
    Recommendation
    If possible, use the setting in the standard R/3 System. No further action is then required. If you want to make individual fields inaccessible, the easiest way is to group them together in a single field selection group and to set it to Display or Hide.
    Activities
    1. Check the setting in the standard R/3 System.
    For this, you need to know the data screen on which the relevant field appears in the material master, and the name of the screen field, for example, MARA-MEINS in the case of the base unit of measure.
    2. If necessary, change the assignment of fields to field selection groups as required.
    Further notes
    In the case of long texts, you define whether the entire screen is hidden or displayed, or whether entries are mandatory or optional. For this reason, each screen has been assigned to one of the following dummy fields:
    LTEXT_BEST Purchase order text
    LTEXT_GRUN Basic data text
    LTEXT_IVER Internal comment
    LTEXT_PRUE Inspection text
    LTEXT_VERT Sales text
    help for OMS9
    Maintain Field Selection for Data Screens
    In this IMG activity, you create and maintain field references. You can see where a field reference is used by choosing Where-used list.
    Activities
    Define or change the field references as required (except for field references with the prefix SAP which must not be changed). New field references must begin with Y or Z.
    Changing the Field Selection Options for a Field Selection Group
    1. Specify the field selection group.
    2. Select the field selection option (hide, display, required entry, or optional entry) for each field reference as required.
    3. Save your data.
    Creating a Field Reference
    1. Choose New entries.
    2. Specify a field reference beginning with Y or Z.
    3. Select the field selection option for each field selection group as required.
    4. Save your data.
    Changing a Field Reference
    1. Double-click the relevant field reference.
    2. Change the field selection option for each field selection group as required.
    3. Save your data.
    reward if usefull
    Message was edited by:
            Umakant Bhangale

  • Can any one pls let me know how to set up budget in HRMS ..

    Hi Gurus,
    Can any one pls let me know, how to setup Budget in HRMS ..
    with regards
    user600722

    Hi,
    Thank you for the Valuable Information Sir ....
    with Regards
    User600722

  • Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that- thanks

    Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that… thanks

    There's more to it than that.
    Folders in Aperture do not hold Images.  They hold Projects and Albums.  You cannot put an Image in a Folder without putting it in a Project or an Album inside that Folder.
    The relationship between Projects and Images is special:  every Image must in a Project, and can be in only one Project.
    Images can be in as many Albums you want.  Putting an Image in an Album does not move it from the Project that holds it.
    You can make as many Versions from a Master as you want.
    What you want to do may appear simple to you, but it still much adhere to how Aperture works.  I still can't tell exactly what you are trying to do (specifically: Images don't live in Folders; moving an Image from a Folder is non-sensical).
    It can be very confusing (and frustrating) to get going with Aperture -- but it does work, and can be enormously helpful.  If you haven't, take a look at the video tutorials on Apple's Aperture support site.
    I feel as though I haven't helped you much -- but we need to be using the same names for interface items in order to get anything done -- and my sense is that you still haven't learned the names of the parts.

  • HT4436 I both have iCloud accounts and would like to share photo's etc. Can any one please advise if this is possible and how to do it?

    My wife and I both have iCloud accounts and would like to share photo's etc. Can any one please advise if this is possible and how to do it?      
    I have a Macbook-pro and Ipad, my wife has a much loved ipad.

    It's all described in iCloud Help here: http://help.apple.com/icloud/#mmc0cd7e99

  • Help needed I updated my ipad2 with iOS5 but few of my dashbaords are not working now can any one let me know how to downgrade the OS

    Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent

    Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • How to install windows 7 on my macbook pro mid 2009 using usb. right now aim using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me

    how to install windows 7 on my macbook pro mid 2009 using usb. right now iam using mavericks 10.9 can any one please help me. I tried to edit plist in boot camp but it went wrong please help me.
    Iam new to coding. please help me.

    try the solution posted by kunu here and report back
    https://discussions.apple.com/thread/5105056?tstart=0

  • Hello guys..!! I have got my new  iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!

    Hello guys..!! I have got my new  iphone 4 2 days ago.The same day it got a problem of auto restart in every 1, to 2 minutes. I updated and restored it many times...but of no use... can any one help me how to solve this problem..!!

    Go to Settings/General/Reset - Erase all content and settings. the connecto to iTunes and restore as a New phone. Do not restore any backup. If the problem persists you have a hardware problem. Take it to Apple for exchange.
    This assumes that the phone is not hacked or jailbroken. If it is you will have to go elsewhere on the internet for help.

  • Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ?

    Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ? Please help me as its urgent.THanks for your help in advance.

    Hi Jay,
    SSIS can only recognize the absolute path of a XML Configuration file, the relative path is not supported. Furthermore, if the XML Configuration file is already generated, we can use the Environment variable package configuration type instead so that
    SSIS runtime automatically looks for the configuration file from the path defined in the environment variable. This is convenient when we need to deploy a package to different environment. We only need to define the environment variable for package configurations
    once on each server, and then the variable can be used by all the packages on this server.
    Regards,
    Mike Yin
    TechNet Community Support

  • I've lost an important email correspondence from 2012. I've heard this could be due to getting new Mac with Mavericks. can any one tell me (how to find out) if this is related? Also, how to retrieve the lost emails in my Gmail? Thanks

    Hello!
    I've just been told that "a lot of people have reported the total loss of their e-mail related to the Mavericks (10.9) update.  It appears the update corrupts the email files on your computer and when the Apple e-mail client sees everything is "gone" it wipes the server too (your GMail account)."
    I need to recover/retrieve a lost email sent from my GMail account back in sep/oct 2012. can any one help?
    I have searched my account the relevant correspondence is gone. I should not have deleted it myself. I've only started using "Mail" for my GMail account last September, so the servers could not have mixed up the Gmail archives, I think. Either way, I'm not smart enough yet to know how to retrieve this correspondence. The lost email is rather important, why I need to investigate all possible solutions.
    My gmail settings i.e. POP/IMAP and Filters are as they should, as far as I believe, but yet, I cannot tell how my settings were in 2012, tho I think I've never changed anything personally. In Sep 2012, arounf the time the, now lost, corresponcence took place, I switched to using Chrome, where before I was using Safari or Firefox. I now use a new mac book with Mavericks and browse in Chrome, most of the time.
    Would anyone be able to guide me through some steps, or have any leads on this?
    Many thanks in advance!
    LK

    Unless you've done anything to change it, Google keeps every email that ever passes through their server in your All Mail folder/mailbox/label. Even if you delete stuff, they hold onto it, there. You have to go out of your way to actually delete anything permanently.

  • I need to pass value for Actual GI date field in VL01N t code, I am using BAPI_DELIVERYPROCESSING_EXEC. can any one tell me how can i pass vaule ?

    I need to pass value for Actual GI date field in VL01N t code, I am using BAPI_DELIVERYPROCESSING_EXEC. can any one tell me how can i pass vaule ?

    Hi Abdul,
    Sorry for my unprecise answer, but you talk about a tcode, but you're using a BAPI Call. Maybe you want to call the transaction in batch mode?
    http://help.sap.com/saphelp_erp60_sp/helpdata/de/fa/09715a543b11d1898e0000e8322d00/content.htm
    Regards,
    Franz

  • Can any one tell me how can i call a shell script from pl/sql

    i like to call shell script from pl/sql procedure.
    can any one suggest how can i do this

    Have you not mastered in asking the same kind of question ?
    First do write a script...
    no one will spoon feed you.
    How can i call a shell script from procedure
    How to call Shell Script from pl/sql block
    -Sk

  • Can any one give me hint how to create(dsplay) calendar in jsp 1.2

    can any one give me hint how to create(dsplay) calendar in jsp 1.2
    friends
    i wants to display calendar (not the date) in tabular way please give me hint how to create it

    Hi,
    i would just add my question cos it looks similar , how can i add calendar of the whole year and let the user browse and select it
    thanX in advance

  • Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

    Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
    Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
    If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite.

  • I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.

    I bought CS6 creative suite. As of now i need to work each application in separate separate system. Can any one please help me how to solve this problem.
    I saw the below quote on Adobe forum
    "You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each."
    If i install each application in single single system the system count is more than two. In this case, are we have any license issue? Please advice how the problem will solve?
    If possible please send the advise to my mail id: <Removed by Moderator>
    Thanks
    Uvaraj S

    I already answered that.  If you purchased a Suite then you can only install and activate it on two machines.  Even if you only insdtall one of the applications of that suite, it counts as one activation of the suite.  You cannot take the six or seven different applications that might be in a suite and install and activate them in six or seven different machines... only two machines.
    If your scenario will allow for it, one thing you can do is install the programs on all the different machines and only activate two of the machines at any given time.  If you need to activate a program on a third machine then you need to deactivate on one of the currently activate machines first so that you have an open activation to use again.  I do not remember if there is a limit to the total number of activations you can process for the life of the software.

Maybe you are looking for