Gutenprint 5.2.1 released

Just thought I would let you know that Gutenprint 5.2.1 is available and it certainly helped me in getting my Epson DX9400F working.
Use the following link
http://sourceforge.net/forum/forum.php?forum_id=879599
Not sure if this is the correct use of the forum..... but still

Boece wrote:
The Gutenprint 5.2.1 was a real disappointment for me. Prints in draft quality (very faint) on the Standard setting -- and is slower -- with my Epson CX7800.
There were changes made to the driver for the Epson CX7800 in 5.2.0-rc1 and 5.2.1. These changes were noted in the release notes:
Color and tonal correctness at low and medium resolutions has been fixed on many Epson Stylus multi-function devices, including
... Stylus CX7800 ...
This issue affected printing at 720 DPI and below. This issue was fixed for the Stylus CX7400, Stylus DX7400, and Stylus DX7450 in Gutenprint 5.2.0-beta4, but not on other printers at that time. Since then, we have determined that the same fix is needed on these printers.
Output will be quite grainy at these resolutions, but colors will be correct.
I do not know if there will be additional corrections made for the effected printers. I would certainly hope so. Might I suggest that you make your disappointment known to the developers of Gutenprint. You can post on their Open Discussion forum at https://sourceforge.net/forum/forum.php?forum_id=4358. You might be able to get more information as to whether work continues on these printers.

Similar Messages

CS3 won't print

I've suddenly run into a situation where PS CS3 won't print. The Print dialog comes up as usual, but after making the selections and hitting Print, the print job never makes it to the printer(s).I'm using Epson printers and running Mac OSX Leopard. I can print to the printers from other applications, and even from PS CS2. I've checked my scratch disk for space, so the images can be spooled, and have plenty of RAM available. The size of the images doesn't seem to matter.
I recently upgraded to the latest CUPS drivers, but I don't think that should affect PS. Epson says that the printers have built in support in Leopard, so no individual drivers can be downloaded. I would think that PS would be using thebult in drivers that shiop with the OS and not the Gutenprint drivers, anyway.
Has anyone had this problem before, or a solution?
Thanks in advance
William

CUPS and Gutenprint are two different animals, though the former is needed to use the latter.
You'll find the uninstaller here:
http://gimp-print.sourceforge.net/MacOSX.php
CAUTIONARY NOTE for CS4 users: If you have an Epson printer model for which Epson does not offer a 16-bit printer driver (for instance the Epson 2200 don't know of any others off-hand)), the latest version of Gutenprint, 5.2.2, will allow you to use 16-bit printing in Tiger and Leopard. In that case, you may definitely want to keep Gutenprint. I've been running it with no problems for about a week.
Gutenprint 5.2.2, released some two weeks ago, appears very stable and offers several bug fixes from earlier Gutenprint 5.2.x releases.
On the other hand, don't take this as a riniging endorsement of 16-bit printing (yet) if you're not already experimenting with it. I'm very happy with preliminary results, but it does slow printing considerably, as you're sending an awful lot more information to the printer. :)

Trying to add Windows Networked HP PhotoSmart C3100 to MacBook

Hi, re-born Mac user here...first time posting to discussions group. Purchased a MacBook last Saturday, also got the HP PhotoSmart C3100 printer at our Apple store. Installed the HP software on the Mac...no issues. However, the printer will permanently reside on a Windows network at home connected to an XP box. I installed the HP software on that PC, with no issues. I run wireless-G from my MacBook to my Windows LAN to already print to a Brother HP Laserprinter. I followed instructions at http://www.ifelix.co.uk/tech/3015.html on how to do setup a network printer on a Windows network for a Mac : Applications : Utilities : Printer Setup Utility (the C3100 IS listed there...but I assume that appeared from my local USB connection..so I proceed on....) : Add : Windows Printing : Workgroup..Select : Printer Model HP : Scroll to find the C3100....but there isn't one....even after installing the HP software on the MacBook. There are some gimp drivers for older series', but nothing for the C3100, even after a successful local install.
I've looked at several posts here for printing (universal drivers and gimp...but none are for the C3100 (prob too new?).
My question: I went through the same procedures noted on ifelix.co.uk to try to install a "network version" of the HP C3100, but since I don't see a C3100, what should I do now ?
I'm thinking I should see a "Have Disk" button like in XP, but was wondering what my next step should be ? Can I pick "Other"...and roam around on the Mac Library and drill down to Library...Printers.....HP...Photosmart ? There is a non-greyed out file there , libHPUtils.10.dylib , but I don't even want to try this MS-style thing being so new to the Mac world.
Anyone have some ideas or suggestions ? Thanks so much for your help, in advance ! It's so much fun to be reunited with the MacOS after a 7 year separation !
MacBook Mac OS X (10.4.7)

Eric,
As far as I know, resetting the print setup will clear any preferences or caches. I'm not 100% positive, but I believe the hp installed drivers will remain on the system and available. I have both a system supplied and HP vended driver for the printer I'm using with this machine so I can't check it now, but I'm almost certain you won't have to re-install the software.
I have multiple connections to a printer setup on a few machines. For instance, I have one profile for IP printing and another as Bonjour/rendezvous. The limitations for that type of print setup have more to do with the printer than the OS. Some HP printers do make you go through the arduous hp setup process each time you switch the interface (USB, ethernet, wireless). Some printers just work. The main reason you want to use HP software is for special features (scanning, copying, duplexing, photosharing, email, transferring data from printer attached cameras or memory cards, etc).
There's no real reason to not keep as many profiles as you use in your print center. You can rename the printers in the print center based on the interface so that you don't get confused. It's possible that you can bypass a setup routing for a PhotoSmart by just adding it twice. You may need to set something else as a default printer during this procedure.
Desktop printers are good. If you don't want the clutter you can also just drag the printer from Users/you/Library/Printers/ into the dock or into the sidebar of the finder for quick access.
BTW, if you are trying gimp, did you try the latest release of gutenprint (5.0.0 release) http://sourceforge.net/projects/gimp-print/
Good Luck,
-j

Gutenprint with HP 2100--hangs up between print jobs. Help?

Working on hooking up HP Lazer Printer 2100 with OS 10.9.1
Have successfully installed Gutenprint 5.2.9 and usbtb
USB hookup to computer (Mac Pro).
Printer working but only one job at a time. After each print job, the queue hangs up (saying printer not responding). If I click the pause button and then the go button again, printer prints the next job fine.
I am no expert on this sort of thing and am already giving myself some serious high fives for having gotton this far after everyone told me to simply ditch my old 2100 and buy a new lazer. So now if I can work around this problem, I think I'm good to go.
Anyone with suggestions?

Hi,
I got an HP2100 for ages now. My wife can print only sometimes with 10.4 with generic drivers and I can print better with 10.5. Just today the printer did not want to talk to me anymore and the only way to connect was with Appletalk enabled over ethernet cable. That works usually very reliably for me.
Going over airport to the printer (through the wireless router) is the flakiest. I know this sounds bad but once it works it usually works.
Regarding your specific issue: One thing that helps is to hold down the little button on the control panel and then the bigger one in the front for a while. When released, the printer will print a Jetdirect Configuration page and a self test configuration page. That will tell you a lot.
Hope you find a bit of usefulness in my response.

Gutenprint quits repeatedly & Epson Driver has gone nuts

Since upgrading to Snow Leopard, when I attempt to print from my Epson R340, Gutenprint quits the moment I click the "Print" command in the printer setup window.
On the other hand, when I print from Photoshop, I somehow end up in what looks like my normal Epson print window, but the printer goes berserk and spits out several blank pages, two of which have half of my image printed on them.
Comments appreciated.

Did you possibly have a later version of Gutenprint installed before you updated? OS X 10.6 ships with Gutenprint v5.2.3. A later version of Gutenprint was released shortly before OS X 10.6 shipped and did not make it into the OS X 10.6 release.
If you had the latter version of Gutenprint installed before updating to OS X 10.6, the Snow Leopard installer will make your printers stop working. The solution is to reinstall Gutenprint v5.2.4. This is available from http://gutenprint.sourceforge.net/MacOSX.php
If that is not your case, please use a web browser and go to http://127.0.0.1:631/admin/log/error_log? This will display the CUPS error_log. There should be an error notice (begins with 'E date...' there followed by multiple lines of debugging information (begins with 'D date...'). Please post the error message and perhaps 50 to 75 lines of the debugging information.
Matt
Message was edited by: Matt Broughton

Updated Gutenprint Drivers

There is a new developmental release of the Gutenprint drivers for Mac OS X. Gutenprint 5.1.4 fixes an issue for Epson printers in Mac OSX 10.5.x (Leopard) where the printing system was not obtaining the proper resolution from the Print Quality setting and was defaulting to the lowest printer resolution found.
http://gimp-print.sourceforge.net/MacOSX.php3
Matt

Robert A J Davies wrote:
Although it quite clearly states it in the accompanying documentation, it's worth stating again here - DO NOT install Gutenprint 5.1.4 if you use a HP printer. The drivers for the greater number of HP printers have been removed from this release.
A point of further clarification: The drivers for many HP printers has been removed from the developemntal branch of Gutenprint (5.1.x). These printers will still be supported in the stable branch of Gutenprint (5.0.x).
The default install of 5.1.4 will remove the HP 5.1.3 drivers installed by Leopard (ask me how I know )
Yes, that is correct. You cannot have more than one installation of the Gutenprint 5.x.x drivers on your system. They will conflict with each other and not work. You can, however, have a copy of the Gimp-Print 4.2.x drivers installed at the same time as a copy of the Gutenprint 5.x.x drivers. They use different file structures and will not be in conflict with each other.
Did you also get a message window that your HP printer was not supported before the installation process was started? If you had a print queue using an HP driver that is not contained in the new release, you should have gotten such a warning and would have had to "click through" and tell the installer to continue. The default option is to Quit. Choosing this option will abort the installation and not touch any files on your computer.
I'm not trying to be argumentative in any of this. I just want expand on what is happening and what you should have seen during your installation.
Matt

Using SQVI to generate report of open and released delivery schedule lines

All,
I'm using SQVI to generate an excel spreadsheet for some buyers to show open released schedule lines because they are a 1 line item per scheduling agreement company.
I used the logical database MEPOLDB instead of a table joint and pulled fields from EKKO(vendor, SA #,&purchasing group), EKPO(Material Number), EKEH(schedule line type), and EKET(delivery date, scheduled qty,previous qty).
Does this sound like I'll get the results I want on paper as long as I use the right selection criteria, because the report I'm getting isn't quite what I expect? I am unable to identify which lines are authorized to ship vs. trade-off zone, planning, etc. in the report thus far.

Hi Mark,
I have faced same requirement. I am not sure about transporting to TST and PROD. I done by this way.
After generating SQVI program in DEV , I assigned that program to a transaction and tested in DEV. Later i have regenarated SQVI in Production. then I assigned the generated Program to same transaction in DEV. And transported the Tcode assignment of program to Production..
About authorization , if its not sensitive report, BASIS can restrict at transaction level.
Regards,
Ravi.

Error while releasing a request.

Hi All,
I'm facing an error while releasing a request.
The request contains an ABAP programs along with two INCLUDDE programs as well as a TCode to run the same.
It is running successfully in dev. server. But, while releasing ths request it shows me the following error :
" Object REPT ZBAPI_SD_SERV_SALES_ORDER is inactive " ,
where ZBAPI_SD_SERV_SALES_ORDER is the program name. When I checked out in ABAP editor it shows the program active.
But, I'm unable to understand why its showing me an inactivation error.
Guys, help me out in this.

Hi,
Check if the INCLUDE program are also ACTIVE. They must be in inactive state. Try activating them and release the request.
Regards,
Vikranth

Report RFKLBU10: Missing Parameter for Logical filename in Release ERP 2005

Hello Experts,
Report RFKLBU10 in Sap Release 4.6c hat a parameter "Old dataset logical name".
The new version of this report in SAP Release ERP 2005 there is no such parameter.
Is this a SAP-Bug ?
Best regards,
Mike

There are no Export or Print events accessible for the viewer
Since it sounds like you are creating the reportdocument object in your click event, the settings on this object become out of scope on successive postbacks executed by other events.
to get around this without major changes, you can place your "report" object in session in this event and retrieve it from session on successive postbacks. This should solve your problems around navigation, printing and exporting. What you will need to do is check if the session object exists (usually in page_load or page_initialze) and if so, retrieve it from session and bind it to the viewer's reportsource. If the session object does not exist, then do nothing (ie you have not clicked your button yet that retrieves the parameter values from session and loads the report). Also, in your click event you can check if the report session object exists and if so, remove it so that it can be re-created with your new parameter values (ie i'm assuming the only time you want to set parameter values is in this event).
Dan

Partner Application in release 2

Hello,
I have to create a new PL/SQL partner application in the release 902.
Where is the new sso sdk for the new Portal release?
In the new pdk seems that it is the same of the 309 release (ssosdk307_032101 or ssosdk307)...
And the pl/sql example code in the Oracle9 iAS Single Sign-On Application Developers Guide is not working...
Can someone give me some feedback?
Thank you and regards,
Lorenzo.

Lorenzo,
Did you get any feedback on this posting? I'm also working with Release 2 (9.0.2) and is just about to start implementing the Java SSO SDK. The latest release of SSO SDK I've found is 307. According to the documentation this version supports SSO server 3.0.6 to 3.0.8, thus not Release 2. Please reply if you have any news regarding SSO SDK for Release 2.
Best Regards,
Rikard

Issues fixed in FM 7.1 release

Adobe FrameMaker 7.1 for English, French and German was released on January 10, 2004. The following is a list of issues fixed in this release.
250374
FDK: FA_Note_PreSetAttrValue notification not sent for new elements. If a client subscribes to FA_Note_PreSetAttrValue events, it will get a notification when one changes an attribute by double clicking it in the Structure view. However, on creation of a new element through the element catalog, if an attribute is set, no notification is sent.
This issue has been resolved.
277554
FDK: F_ApiUnStraddleCells() does not work as expected.
When unstraddling cells through the API, all the cells except the leading cell have no paragraph end marks (they are completely empty). Clicking into such cells takes the text cursor to the location of the table anchor. Inserting a character into the paragraph with the table anchor seems to correct the table.
This issue has been resolved.
310049
FDK: F_ApiImport shows a dialog upon import of SGML entities.
When importing an SGML fragment by reference using F_ApiImport, FrameMaker displays a dialog asking whether the text inset should be updated automatic or manually. This setting should be controlled from import-parameters.
Currently there is no way of creating a client that imports a large number of SGML text-insets without having a user sitting by the keyboard and clicking OK for each imported entity.
This issue has been resolved.
314764
FDK: F_ApiDelete does not work properly on elements inside a TextInset. When you try to delete an element that is part of a TextInset, the whole TextInset is removed.
The work around for this is to unlock the text before calling F_ApiDelete and to lock the text after this call. The calls to unlock and lock the text are given below:
To unlock - F_ApiSetInt(docId, insetId, FP_TiLocked, False);
To lock - F_ApiSetInt(docId, insetId, FP_TiLocked, True);
387821
Microsoft Intellimouse Scroll wheel locks up FrameMaker when it's pressed or scrolled.
This issue has been resolved.
408675
Rotated PDF files do not appear on 24-bit or 32-bit displays.
This issue has been resolved.
463533
Non-unique ID tags cause inconsistent hypertext links due to multiple entries in the HTML export. If there are conflicting IDs in different documents of a book, non-unique ID tags are generated which cause this behavior.
This issue has been resolved.
507486
If you edit the MAKER.INI file by adding the line SplashScreen=Off, in the [Preferences] section, then the Help->About command crashes FrameMaker with Internal Error: 7004, 6048898, 7639747, 0
This issue has been resolved.
529757
(don't include) Marker element gets included and merged in PDF bookmarks with previous heading. In FrameMaker 6.0, the document prints to PDF as expected--the bookmarks in Acrobat PDF contain the Section2/Heading as expected, such as:
Spark Plug Threads
and Lamp Base and Electrical Fixture Threads
In FrameMaker 7.0, the document prints to PDF with the Section2/Heading merged with the Run.head marker element, even though Run.head is in the ''Don't include'' list of elements in the PDF Setup dialog box.
This issue has been resolved.
534856
The value of DPDFOpenBookmarkLevel is ignored when read in a MIF file.
This issue has been resolved.
534865
The values Default, All, and None of the ''Bookmarks expanded through level'' field (in Format > Document >PDF setup) are not retained when a FrameMaker document is saved and opened again.
This issue has been resolved.
535630
Windows Metafile (wmf) graphic (created from Microsoft VISIO 2002) causes "an error occurred while printing" but partially prints.
This issue has been resolved.
537955
ISOdraw CGM graphics and tables on the same page cause CGM stroke lines to be printed in White.
This issue has been resolved.
540408
Inconsistent dialog behavior between FrameMaker 6.0 and FrameMaker 7.0 when opening filename.sgm. Unlike FrameMaker 6.0, FrameMaker 7.0 displays the Unknown Filetype dialog.
This issue has been resolved.
540417
Inconsistent dialog behavior between opening filename.sgm and filename.sgml.
This issue has been resolved.
541912
TaggedPDF:fmpdfreflow plug-in - display of PDF file not good for shaded table cells. When table cells have shading in them, the PDF file does not show all the content of the shaded cells. This happens on Windows only.
This issue has been resolved.
565678
PDF generation on UNIX translates CMYK colors to RGB.
This issue has been resolved.
567784
FP_InsetFile has a value of "BadFileName" when SGML importing misses a graphic data file. If you import an SGML file that would read external graphic files and these data files are missing, then skipping or ignoring them results in "BadFileName" pathname for each object property. This makes FDK API Client not get FP_InsetFile property value for the FO_Inset object.
This issue has been resolved.
569092
FrameMaker7 server can't find default printer when launched as a service.
This issue has been resolved. To suppress the errors during initialization e.g.. No Default printer, invoke FrameMaker with the -silent option.
569969
When the Paragraph Designer is open, you can't switch to open documents using the book window.
This issue has been resolved.
581376
FrameMaker works very slowly or returns an internal error. When processing a document that includes many EPS image files, FrameMaker creates many FRMxxxx.tmp files in the C:\Documents and Settings\Account Name\Local Settings\temp\ folder. The xxxx is a hexadecimal number. Even after quitting FrameMaker, the FRMxxxx.tmp files are NOT deleted, and the same document creates different FRMxxxx.tmp files after being opened again. The template files pile up in the hard disk for the Account/user, until the xxxx reaches ffff, the maximum number for the 4 digits of a hexadecimal number. At or near this time, FrameMaker works very slowly or stops with internal error:7004,6643018,6765315,6712018.
This issue has been resolved.
581522
Imported PDF document with transparencies does not print correctly.
This issue has been resolved.
584633
Internal Error: 7004, 6055410, 7657059, 0 when saving/printing to PDF includes Bookmarks that include index elements. The crash occurs only on Windows. The problem occurs when you attempt File > Print to PDF, when you want to Generate PDF Bookmarks based on structure elements, and have the ''Sectlevel1'' element in the ''Include Elements'' pane, and that particular ''Sectlevel1'' element plus the length of the text in the index marker entries exceeds 256 characters.
This issue has been resolved.
589859
Post installation of Distiller 6.0, .tps file gets retained along with PDF and log file.
This issue has been resolved.
592974
Opening a large XML file in FrameMaker generates error 'Internal Error 7004, 6052770, 0....
When an XML file contained more than 65520(FFF0) children elements, FrameMaker crashed.
This issue has been resolved.
595875
Spell check skips elements, loops around elements, or gets completely stuck.
This issue has been resolved.
597276
The Save as PDF command does not create a PDF file (for certain files) when Generate Tagged PDF is ON
This issue has been resolved.
598056
Group4 fax encoded TIFF files imported in FrameMaker 7.0 don't display nor print--does not occur in previous versions.
This issue has been resolved.
600053
Display/Scrolling performance is very slow with documents having TIFF images imported by copy.
This issue has been resolved.
600497
Scrolling a document in FrameMaker using Page Up/Down button goes to previous/next page respectively. Scrolling a document using Page Up and Page Down button goes to the previous and next page respectively. User would expect to scroll to the previous/next screen instead of going to previous/next page using these buttons, as seen in other Windows applications like MS Word, etc.
This issue has been resolved.
601470
Links being dropped in SVG filter. Import an SVG file by reference (and the imported file has a link to another SVG file). Save this and reopen; the referenced SVG file is missing.
This issue has been resolved.
603668
The text in the markers gets included in the PDF Bookmarks. Do not include textual content of marker elements, such as Index markers. This is because if you do, the Acrobat bookmarks can appear created if the element has:
where Indexterm contains the marker text:
<$startrange>PDF Creation;<$endrange>PDF:Good;How To:Create Good PDF
... You will end up with an Acrobat Bookmark containing:
How To Create <$startrange>PDF Creation;<$endrange>PDF:Good;How To:Create Good PDFGood PDF ... which is not desirable.
This issue has been resolved.
606704
In Server Setup dialog box, user name of the form "domain\username" does not allow names starting with b, r, etc. While trying to get FrameMaker to talk to the WebDAV server, which is using Windows authentication, when we specify a user name of the form "domain\username" in the "Server Setup" dialog box (File | Workgroup | Workgroup Servers ...). For some user names this works; for others it doesn't.
This issue has been resolved.
607610
Framemaker crashes when Print is selected twice from the context menu for a book.
This issue has been resolved.
610099
Drop Caps are not imported as TextFrames (RTFImport).
This issue has been resolved.
610600
Words on which cross references are created are getting dropped while importing doc file (Word2000Import). Create a cross reference on some word in MS Word, and import the doc file into FrameMaker. The word on which the cross reference is created is getting dropped.
This issue has been resolved.
611165
Words on which cross references are created are getting dropped while importing rtf file (RTFImport). Create a cross reference on some word in MS Word, and import the rtf file into FrameMaker. The word on which the cross reference is created is getting dropped.
This issue has been resolved.
611802
Text which is rotated is lost when exporting to RTF.
This issue has been resolved.
611900
FrameMaker locks referenced files until the application closes.
This issue has been resolved.
613546
The filter name in the unknown file type for import is Microsoft RTF whereas for Export it is Microsoft RTF 1.6.
This issue has been resolved.
616153
Contents of anchored frames not visible after save as PDF with Tags. After saving a document with anchored frames as PDF with Tags enabled, the contents of the frame are not visible in the PDF generated.
This issue has been resolved.
624470
footnote element mapping to Frame Footnote is commented in Rules defined for XDocBook. In application definition of XDocBook in $FMHOME/structure/xml/xdocbook/app, footnote element mapping is to FM Footnote element. However, this rule is commented since past few releases. As a result, any (xdocbook) XML document with footnote is shown as invalid in FrameMaker.
This issue has been resolved.
624472
Revision remark (revremark) element is mapped to different element names in EDD and rules. Rules for XDocBook in $FMHOME/structure/xml/xdocbook/app translate revremark to RevRemark. However, EDD (ECM) defines Revremark as mapping for revremark element. Hence a valid xdocbook XML document with revremark is shown as invalid (with unknown RevRemark element) in FrameMaker.
This issue has been resolved.
624517
Unable to open FrameMaker 7.0-created fm file, which is created by importing a Word document.
This issue has been resolved.
625306
Office documents don't open in FrameMaker in absence of write permissions (UNIX).
This issue has been resolved.
626431
For line spacing, values that are beyond range are not mapped correctly (RTFExport). For line spacing in frame document which are beyond the max or min range of RTF, the mapping is not correct and same value of line space I mapped to three different values in RTF.
This issue has been resolved.
626434
For stretch, values that are more than 600 are not mapped correctly in RTF (RTFExport). For stretching in frame doc that are beyond max value in RTF (600), the mapping is not correct. There is no stretching (scaling in RTF) in effect in exported RTF for values greater than 600 specified in frame.
This issue has been resolved.
626450
Current date and time are not getting exported properly and are coming as 0's and XXX (RTFExport).
This issue has been resolved.
627855
After saving as PDF, headings are centered in reflow mode. After a particular file is saved as a PDF file and is viewed in reflow mode in Acrobat, the headings are centered.
This issue has been resolved.
631967
Installer does not recognize existing installation.
This issue has been resolved.
633133
Right indents are not mapped while importing Excel
This issue has been resolved.
633137
Data in the Custom formatted cell is lost while importing excel sheet.
This issue has been resolved.
633462
FrameMaker terminates while exporting to RTF.
This issue has been resolved.
633710
You have to give a filename with extension, while saving a file to RTF.
This issue has been resolved.
638750
A PS file generated from FrameMaker with Tagged PDF on and hypertext marker in the file, cannot be distilled to PDF
This issue has been resolved.
638824
Dialog Box indicating Unsaved changes made to file is not displayed on closing a document after importing an image using drag and drop.
This issue has been resolved.
639220
If you select a Master Page or a Reference Page and select Save as PDF, PDF generation fails without giving appropriate error message.
This issue has been resolved.
641918
When converting a FrameMaker book to PDF: default opening page in PS/PDF may be incorrectly set to be the first page of last chapter in a book.
This issue has been resolved.
642765
On drag and drop of a SVG file into FrameMaker, if you click on the cancel button on the Import SVG dialog, the cancel is ignored and the file is imported.
This issue has been resolved.
643092
If United Kingdom is chosen as the country of purchase, the EULA contains the string "FrameMakerDesktop _USEnglish_1.21.02_17:29".
This issue has been resolved.
644158
Following alerts can not be suppressed via command line option:
. Register now/later/never
. Adobe Online
These can be now suppressed using the -noaol command line option or by using the DisableAdobeOnline=On option in the maker.ini file.
644904
An empty merged cell(256 columns) created in Excel imports as a blank file.
This issue has been resolved.
645230
If you import a Word document having large number of footnotes in FrameMaker, the footnotes are overlapped.
This issue has been resolved.
645538
Cross reference text when exported to RTF has an additional space after the cross reference text.
This issue has been resolved.
645863
When an excel file containing cells applied with custom formatting is imported in FrameMaker, the font and color of these cells is different in FrameMaker.
This issue has been resolved.
646609
When a specific excel file is being imported the data in the first cell is lost.
This issue has been resolved.
646676
When saving a MIF file, then opening it in FrameMaker, the DPDFZoom settings are lost.
This issue has been resolved.
647770
User defined variables with _ in their name when saved to xml and opened again in Frame, round-trip as fmv1, fmv2 ...
This issue has been resolved.
648043
When you try to open/import a file with a name containing more than two % signs and at least 1 non-% character between the second and third % sign then FM gives an error saying the file is non-existent
This issue has been resolved.
648114
Info>Copyright>More crashes FrameMaker
This issue has been resolved.
648434
When you import an RTF file with a cropped image in FrameMaker, it is imported in its original uncropped form.
This issue has been resolved.
649640
When a word document having text with decimal numbering is imported, the sub points (1.1,1.2,...) are imported as (0.1,0.2,..)
This issue has been resolved.
650631
When you import a word document having numbering points with comment on each numbered point, the font size of the numbering point is reduced.
This issue has been resolved.
650962
FrameMaker crashes on scaling any anchored frame on reference pages.
This issue has been resolved.
652229
When you import a word file with ascending raised/lowered baselines then they are not imported correctly.
This issue has been resolved.
652433
When you import an excel file containing date formatting having mm format, FrameMaker inserts an extra zero before the date.
This issue has been resolved.
652752
If you install FrameMaker from network, the short cut to readme file opens it in notepad.
This issue has been resolved.
652794
The alert Inconsistent settings in Book" during F_ApiSilentPrintDoc() can not be suppressed.
This issue has been resolved.
654309
When you import a word document having numbering (1.1,1.2,..) placed after some non-decimal numbering(1,2,3), FrameMaker imports it as (3.1, 3.2,..).
This issue has been resolved.
654348
When you save an inline image as .doc in Acrobat6 and import this word file in FrameMaker, FrameMaker enlarges the graphics on import.
This issue has been resolved.
655072
When you have an user defined variable in the frame document as well as the template, you save this document as XML and open the XML file again in frame, the template definition overrides that of the document.
This issue has been resolved.
655726
Full license number is displayed in the Help>About FrameMaker 7.0 screen.
This issue has been resolved.
656171
Full license number is displayed in the FrameMaker 7.0 Splash screen.
This issue has been resolved.
656820
If you zoom or move frames after importing a graphic in FrameMaker, Framemaker logs out the user from Unix machine.
This issue has been resolved.
657053
If a frame document displays images from the reference page and you simultaneously open multiple such documents, then the images from the document opened first can replace the images in the other documents
This issue has been resolved.
658744
If you open an XML file locked by some other application, FrameMaker shows a Validation Error dialog box. For this to work, the XML locking feature should not be switched off.
This issue has been resolved.
658749
The German version of Online manual xmlcss.pdf has comments in it.
This issue has been resolved.
Known Issues
The printed user guide, on-line help and QRCs will not change between the FrameMaker 7.0 release and FrameMaker 7.1. Certain online manuals will be updated, and a new online supplement will be added to cover user documentation of the new release.
[Original message from Forrest_F accidentally deleted when Forum re-organized]

Read this SAP Note - Note 1487853 - SAP NetWeaver MDM 7.1 SP07 Release
or refer the link
http://help.sap.com/saphelp_mdm71/helpdata/en/4d/885f32b97d14aee10000000a42189c/content.htm
Similaryly read for SP06 fixes at - http://help.sap.com/saphelp_mdm71/helpdata/en/be/e0048b426b4c20957078b61ec71e46/content.htm
These links gives you an idea of what all changes are going to come into your new system. So unless you upgrade to SP07 i.e. the latest version and test it in DEV/Sandbox environment you should not plan to move ahead in Production. This is always recommended but there is very less chance that the already working solution will not work as expected after the upgrade.
Thanks,
Shambhu.

Released Schedule Delivery lines display

Hi Gurus,
I have a scenario in my client place. User wants to display scheduled delivery lines which will sum all the released schedule delivery lines and will display the total quantity in a smart form which will be sent to the vendor. I.E Scheduling agreement Qty - 100. Schedule lines 10 Qty per day and it will hve 10 delivery lines(100Qty=10 qty per day x 10 days). output document will show only the total qty of released schedule lines(sum of all released qty).Is there any standard form/ output type available for this requirement.Kindly advice.

As far as Db link is concern , I dont remember exactly , but 3 years before I had written a report which see Sales order schedule lines and devilry note lines against sales order. If you see process wise. when ever you create PO ( production order you assign some qty using 101 movement type .. and against production order you also give sales order . When you do delivery ( run seclude run ) it delivers against that material number , its movement is 601 ...
but I remember theres a link between these tables, VBAP,VBFA AND VBEP , LIPS ... against every sales order you can see sales invoice ( VBRP,VBRK) and you can also see your delivery note number in document flow .
I hope thisll give you some guide line, as right now I can not tell you the exact business process but I remember I written a report in SD 4 years before , in which they required Delivery against production order and sales order ... One more thing you also have production order reference on delivery item number. ( field :Empst ) . I think in my project they were maintaining this field .
Thanks

Released Schedule lines value

The money value of the schedule lines released during each MRP run to be captured and to be kept and compared against the reciepts.
This will help the business to ascertain the total inventory value they are going to inward and the inventory level can end up
If any standard report is available please provide the same
Ashok

Kalyan ,
refer to oss notes : 690106
here he talks about what is the real motive for changing R mode to X mode .
So but this notes does an undo operation for the same .
We need to re do the same again in start routine if we want to maintain the deleted records . Also search the OSS by giving the data source name & record mode R , then you will also get the original problem in extractors with R mode .
i forgot about the OSS numbers
-Sourav

How do I drag open and close on release?

Ok here is what I am trying to do. I have an HD video that I shot of curtains or drapes opening and closing. I would like to make something in Flash where someone could click one side of the curtain and pull it open. When they release the mouse it should close back. In the video both sides open at the same time so I'm not sure if I can make the sides independent or not. If I can do this I may also want to make a version where the curtain stays where they released it.
After I make a web version I am going to try to turn it into an app for a smart phone. The online use with a mouse is way more important at this time.
I am using Flash CS5.
Thank you to anyone that may be able to lead me in the right direction.

What I have to start with is a real video from a video camera. I want to know if I can have a user click one side of the curtain and as they drag it will step through the frames on the video. I would like to make each curtain independant from each other if possible. If that's not possible I still need for the user to be able to click and pull the curtain open. I wou ld also like the option to make it when the user lets go of the mouse button the curtain falls back into place. And maybe have a version where it stays where they let go of the button.
Anyone think this is possible?

Function Module to Release Scheduled Jobs

Dear All,
I have a requirement to create all the background jobs in SCHEDULED status, this is achieved by using the function modules JOB_OPEN, JOB_SUBMIT and JOB_CLOSE.
Now at a later point of time, i want to release only a few jobs, which were created using the above mentioned procedure. Insead of doing it manually, is there any way to automate this step ??
Regards,
kartik

Dear Mr. Parupalli,
That solved my problem. Thank you.
Regards,
kartik

Gutenprint 5.2.1 released

Similar Messages

Maybe you are looking for