Guys ... I have a 2008 MacPro running the current Yosemite.  I also have installed the sound amp called "BOOM!"  I have the Sound set to Line Out which should have the computer boot up to BOOM! Instead, it boots up to the Internal speaker. What's up?

Hi Folks ...
I have a 2008 MacPro running the current Yosemite. I have installed the recommended upgraded video card, but the sound is as it was new. I also have installed the sound amp/graphic equalizer called "BOOM!"  I have the Sound set to Line Out which should have the computer boot up automatically to BOOM!  and thus to the external speakers.  Instead, it boots up to the Internal speaker.  According to the folks at "BOOM!", this is happening to others who have similar Macs.  They can't find any explanation within BOOM!, so I am turning to you all.  Any ideas?

Hi Kappy ...
Sorry, I guess I didn't state the problem very well.
I don't want the computer to boot up to the internal speaker.  I want it to boot up to the external speakers.  However, even though System Preferences is set on Line Out, when the computer boots up or reboots, it erroneously goes to internal speaker.  So, every time I boot up, I have been going to System Preference/Sound and clicking on Line Out.  From that point on, everything is OK until the next boot up.  It is a small annoyance, but annoying all the less. The simple explanation seems to be that when the computer is shut down, it does not hold the setting for Line Out and resets itself to Internal Speaker.  How do I change that behavior and get it to go to Line Out whenever it boots up? 

Similar Messages

  • [svn:fx-trunk] 9711: The manifest files which should have gone with 9708 ( add TLFTextInput).

    Revision: 9711
    Author:   [email protected]
    Date:     2009-08-27 13:33:22 -0700 (Thu, 27 Aug 2009)
    Log Message:
    The manifest files which should have gone with 9708 (add TLFTextInput).
    Add the base classes used in the TLFText.css selectors to the Halo manifest.
    Add TLFTextInput to the spark manifest.
    QE notes:
    Doc notes:
    Bugs:
    Reviewer: Gordon
    Tests run: mx ColorPicker,DateField,ComboBox,NumericStepper and TextInput as well as checkintests
    one ColorPicker_events_toolTipHide failed - the timer does fire eventually but it seems to take much longer than the hideDelay=10000.
    Is noteworthy for integration: yes
    Modified Paths:
        flex/sdk/trunk/frameworks/halo-manifest.xml
        flex/sdk/trunk/frameworks/spark-manifest.xml

    Thats good news.

  • I have a 2012 iMac, running OS X Yosemite 10.10.2. Is there any way to scan for malware without buying a program?

    I have a 2012 iMac, running OS X Yosemite 10.10.2. Is there any way to scan for malware without buying a program?

    Have you been having some problems that make you think you may have malware installed?
    Download and run Etrecheck.  Copy and paste the results into your reply. Etrecheck is a diagnostic tool that was developed by one of the most respected users here (and recommended by Apple Support personnel) in the ASC to help identify the more obvious culprits that can adversely affect a Mac's performance.

  • Can I do a clean install of Lion, onto my Mac Book Pro4,1, that is currently running 10.5.8? I have seen U-tube videos on how to do a clean install to Snow Leopard, and another from SL to Lion, but can zero out my HD, and do a clean install to Lion?

    Can I do a clean install of Lion, onto my Mac Book Pro4,1, that is currently running 10.5.8? I have seen U-tube videos on how to do a clean install to Snow Leopard, and another from SL to Lion, but can zero out my HD, and do a clean install to Lion?

    See this article.

  • IPhoto was working fine. Performed update for HP printer, which  should have nothing to do with iPhoto. But the next time I tried to open iPhoto, got this message. "To open your library with this version of iPhote, it first needs to be prepared." When I g

    iPhoto was working fine. Performed update for HP printer, which  should have nothing to do with iPhoto. But the next time I tried to open iPhoto, got this message. "To open your library with this version of iPhote, it first needs to be prepared." When I g

    What version of iPhoto? Assuming 09 or later...
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • When I share a link (URL) only Apple computers receive the link. Others such as PCs and Blackberries get the message, but the field which should have the link is blank. Is this normal?  Why can I only send to Apple machines?

    when I "share a link" (URL) using the pulldown menu in Safari, the email goes to all addresses I indicate, but only Apple computers receive the link. Others such as PCs and Blackberries get the message, but the field which should have the link is blank. Is this normal?  Why can I only send to Apple machines?

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • When you get the new iPhone 5S they say it come with al the iWork apps for free install already. But if i restore from back-up from an old device which doesnt have any iWork apps would I still receive those iWork Apps?

    When you get the new iPhone 5S they say it come with all the iWork apps for free install already. But if i restore from back-up from an old device which doesnt have any iWork apps would I still receive those iWork Apps?

    Hey Davin12,
    Yes. The apps are not pre-installed, but rather you are prompted to download them the first time you launch the App Store in iOS 7:
    About Free Apple Apps for iOS 7 compatible devices
    http://support.apple.com/kb/HT5913
    iPhoto, iMovie, Keynote, Pages, and Numbers are free on the App Store for qualifying iOS 7 compatible devices activated or purchased after September 1, 2013
    The first time you launch the App Store in iOS 7 on your qualifying new or factory refurbished iOS device, you will be offered iMovie, iPhoto, Keynote, Pages, and Numbers for free in addition to other free software from Apple. When you tap Download All and sign in with your Apple ID, the apps will be downloaded to your device and added to your store account. If you tap Not Now when you see the offer, you can go back to each of the apps in the store and download them one at a time for free.
    Thanks,
    Matt M.

  • How to find out which documents have been indexed?

    Hi,
    How can we find out which documents have been indexed by intermedia - I get a lot of errors when i look in ctx_user_index_errors - but how can I relate or find which error row means which row or document in the table on which the index is created??
    Thanks
    Dhwanil Shah

    You can enable the log to see what's going. That will tell you the exact number of documets that failed.

  • In LR6CC, after using the merge to HDR and the photo returns to LR as a DRG, it is not automatically put into a previously set up stack. For example a stack of three photos. If I use NIK HDR and the photo returns to LR, the stack is automatically changed

    In LR6CC, after using the merge to HDR and the photo returns to LR as a DRG, it is not automatically put into a previously set up stack. For example a stack of three photos. If I use NIK HDR and the photo returns to LR, the stack is automatically changed from 3 to 4. When LR's HDR merge brings a photo back into LR's library, the stack number does not change and the DRG version isn't included in the stack.

    Hi,
    The Ps CS6 public beta version contains the same camera support as found in Ps CS5/5.5 compatible CR 6.6. There will be future updates to CR 7 for Ps CS6 to pick up more camera support. The Nikon D800 NEF files are not supported, yet.
    If you like to work with your D800 files in the public beta build now, you'll have to get the DNG Converter 6.7 from here: http://labs.adobe.com/technologies/cameraraw6-7/
    and convert your files to DNG.
    regards,
    steve

  • HT2045 I bought a song, which played on my computer. When I tranfered it to my IPod,only the first 30 seconds of the song plays. Help please!

    Please help me.  I bought a song which played on my computer, but when I tranfered it to my IPod, only the first 30 seconds of it will play. Help please. Is there a way I can contact Apple to complain, because I'm not paying $1.29 for the first 30 seconds of a song. Or is there anyway to fix it? (note: i have already synced my Ipod and it has the latest version of ITunes)

    Im having a similar promblem! Only its doesnt work on my Itunes library and the song ends at 49 seconds. Have you fixed your problem yet?
    p.s. my discussion is on the following page but no one has responded yet as I only just posted it.
    https://discussions.apple.com/thread/4097402

  • I have updated to iTunes 10 and now my unchecked songs are playing... I don't want this and can't figure out how to have it like it was before (not playing unchecked songs). Please help!

    I have updated to iTunes 10 and now my unchecked songs are playing... I don't want this and can't figure out how to have it like it was before (not playing unchecked songs). Please help! I leave the unchecked songs in there b/c there will come a point in time where I want to listen to these songs but right now I don't.

    yes, 10.3.1, iTunes already restarted, menu settings already like that and still it will play all unchecked songs (including the checked songs of course). Why even have check and unchecked if the program is going to play all of them anyway?!
    thanks for responding though...

  • I had an App on MacBook Air which would cause my computer to be locked. I delted it and reinstalled the App again from the AppStore. Now I am being charged again for the same App. How can I correct this issue and get refund for the double billing?

    I had an App on MacBook Air which would cause my computer to be locked. I delted it and reinstalled the App again from the AppStore. Now I am being charged again for the same App. How can I correct this issue and get refund for the double billing?

    You can't gift it, gifting can only be done from within the store, not from within your library.
    Puchases are considered final but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Where do I determine the current Firmware version that's installed?

    Where do I determine the current Firmware version that's installed?
    Thanks,
    Kristin.

    Firmware updates necessary (for OS X operation) for older Macs are available at Mac OS X: Available firmware updates
    http://docs.info.apple.com/article.html?artnum=86117
     Cheers, Tom

  • I have a MBP 13" running 10.8, can I also install 10.6 to run apps that don't work with 10.8?

    I have a 13" MBP running 10.8.2, can I also install 10.6 to run some apps that don't work with 10.8?

    Uninstall Genieo:
    http://www.thesafemac.com/arg-genieo/
    See if that makes a difference.
    Ciao.
    DawnHerbie wrote:
    Also is Safeboot ok to use?
    Yes, it will do no harm, but it is meant for trouble shooting and you should not have to use it all the time.
    Message was edited by: OGELTHORPE

  • List of MIGO document in which Excise have not been deducted by the user, which should have been deducted.

    Dear All,
    While doing MIGO, excise calculation is not been done by the users.
    I want the list of document in which excise should have been done by not done by the users.
    This would be the ABAP development but I need to know which table while give the correct information.

    J1I7 standard report should serve your requriement. There are three radio buttons in the Selection screen. You will have to use them according to your requirement.
    If you still want to go with Z report then have used the excise tables MSEG, MKPF, J_1IEXCHDR, J_1IEXCDTL, J_1IGRXREF, J_1IPART1 & J_1IPART2. You will find the entry in the Part1 table if Part 1 is updated and an accounting document in J_1IPART2 table if Part 2 is also posted.

Maybe you are looking for