Guys need help is regarding games. I want to install games like commandos, gta vice city, counter strike etc I mean action games in which we do levels, like games in playsatation and xbox ?

You can only install games that are in the iTunes app store on your computer and the App Store app directly on the iPad - if there are games like those that you mention in your country's store then you can buy and install them. Have you had a look in your country's store ?

Similar Messages

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.

Hey guys need help regarding iTunes U. My school is moving for iOS and Mac in the classroom and I have been appointed Junior Administrator for the schools technical department and integrating these devices into the classroom.
I have an appointment with a director on Tuesday. I want to demo iTunes U. Problem is I have never used it before and have no idea how to set it up and even if I should sign up.
Please help any ideas regarding iTunes U and how I should direct the meeting tomorrow.
Please please post here.
Thanks
Tiaan

Greetings fcit@!A,
After reviewing your post, it sounds like you are not able to select none as your payment type. I would recommend that you read this article, it may be able to help the issue.
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
Thanks for using Apple Support Communities.
Take care,
Mario

I bought a $15 app GTA Vice City a while ago and I just started using it and it doesn't work. I checked all the requirements and my laptop meets all of them. I also have contacted Rockstar Games and they didn't help. Can I get my money back? Its annoying.

I bought a $15 app GTA Vice City a while ago and I just started using it and it doesn't work. I checked all the requirements and my laptop meets all of them. I also have contacted Rockstar Games and they didn't help. Can I get my money back? Its frustruating.

Hi...
Apple's policy states that, "all sales are final" > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
But since you are not getting any help from the developer, you can use the email form to contact Apple and ask for a refund > Apple - Support - Mac App Store - Contact Support.
No guarantees.

Image size and mime type.. non-java guy needs help

Image size, mime type.. non-java guy needs help
Im not at all familiar with java so this is really weird for me to work out. I?ve been doing it all day (and half of yesterday).
Im trying to write a custom clodFusion tag in java that gets the width, height, size and MIME types of a given file. I?ve been trying to get it to work on the command line first. I can get the width and height but cant get the size and the MIME type.
Here is what I got
/*import com.allaire.cfx.*;*/
import java.awt.image.renderable.*;
import javax.media.jai.*;
import com.sun.media.jai.codec.*;
import java.io.*;
import java.util.*;
public class ImageInfo {
private RenderedOp image = null;
private RenderedOp result = null;
private int height = 0;
private int width = 0;
private String type = "";
private String size = "";
public void loadf(String file) throws IOException
file = "80by80.jpg";
FileSeekableStream fss = new FileSeekableStream(file);
image = JAI.create("stream", fss);
height = image.getHeight();
width = image.getWidth();
System.out.println(height + "\n");
System.out.println(width);
System.out.println(type);
public static void main(String[] args) throws IOException {
ImageInfo test = new ImageInfo();
test.loadf(args[0]);
can anyone please help me out to modify the above so I can also print the mime type and the file size to screen.
thanks for any help

any suggestions?

When i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

when i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

My friends need to know that am texting from my I phone for example in Face book I texted a message means in my friend inbox my messages delevire like "sended from his I Phone" what can I do for this

am using I 6 plus
My friends need to know that am texting from my I phone for example in Face book I texted a message means in my friend inbox my messages delevire like "sended from his I Phone" what can I do for this

1. Make your iMessage settings.
2. Change your friends phone number on contacts property of iPhone(not work, home, mobile). if you know his icloud account you can use this too.
3. Use iMessage while messagging with him.
When you open chat with him in sms menu there writes iMessage. and messages shows color of blue.

Hi guys need Help with Displaying Splash Screen?!!?

Hi Guys.
Sorry for the last incomplete post my mistake!
I need help displaying a splash screen as an advertisment or something before i have my main application run.
Here is the code i wrote (it works as if it were a seperate application)
package MajourProject;
import java.awt.AWTException;
import java.awt.Dimension;
import java.awt.Robot;
import java.awt.Toolkit;
import javax.swing.ImageIcon;
import javax.swing.JLabel;
import javax.swing.JOptionPane;
import javax.swing.JProgressBar;
import javax.swing.JScrollPane;
import javax.swing.JWindow;
* @author Matt
public class SplashScreen extends JWindow
    public SplashScreen()
        int UpTime = 20000;
        Start(UpTime);
    public void Start(int UpTime)
        ImageIcon ii = new ImageIcon("src/1.jpg");
          JScrollPane jsp = new JScrollPane(new JLabel(ii));
                JProgressBar Bar = new JProgressBar();
          getContentPane().add(jsp);
          setSize(853,303);
          centerScreen();
          setVisible(true);
               try
                            Thread.sleep(20000);
                           dispose();
               catch(Exception IE)
        private void centerScreen()
                Dimension d = Toolkit.getDefaultToolkit().getScreenSize();
                int x = (int) ((d.getWidth() - getWidth()) / 2);
          int y = (int) ((d.getHeight() - getHeight()) / 2);
          setLocation(x, (y-100));
       public static void main(String [] args)
             new SplashScreen();
}but i now have a problem as i already have a main application done as i wrote this seperately. I now need to combine the two together. So what i did was in my Main Application wrote:
Splash_Screen SS = new Splash_Screen();it then runs my Splash Screen class which i re-wrote to look as such:
package MajourProject;
import java.awt.AWTException;
import java.awt.Dimension;
import java.awt.Robot;
import java.awt.Toolkit;
import javax.swing.ImageIcon;
import javax.swing.JLabel;
import javax.swing.JOptionPane;
import javax.swing.JProgressBar;
import javax.swing.JScrollPane;
import javax.swing.JWindow;
* @author Matt
public class SplashScreen extends JWindow
    public SplashScreen()
        int time = 15000;
        Start(time);
    public void Start(int UpTime)
        ImageIcon ii = new ImageIcon("src/1.jpg");
          JScrollPane jsp = new JScrollPane(new JLabel(ii));
                JProgressBar Bar = new JProgressBar();
          getContentPane().add(jsp);
          setSize(853,303);
          centerScreen();
          setVisible(true);
               try
                            Thread.sleep(20000);
                            dispose();
               catch(Exception IE)
        private void centerScreen()
                Dimension d = Toolkit.getDefaultToolkit().getScreenSize();
                int x = (int) ((d.getWidth() - getWidth()) / 2);
          int y = (int) ((d.getHeight() - getHeight()) / 2);
          setLocation(x, (y-100));
}it obviously runs the default constructor which then runs the other methods in the class but it doesn't seem to show can anybody help me to find out whats wrong? It seems to be there just before the main application launches but only for a split second. And when i am waiting while the thread is sleeping the area i have defined the Content pane for he cursor goes to the loading icon! I don't know if this makes any sence to you but if you can help me it would be most apreciated.
Thanks.

SpearOne wrote:
Hi Encephalopathic
why would it work if i put it in it's own application surely it wouldn't be caused by this thread.sleep?? everything after it is in fact put to sleep. In its "own" application, nothing happens after it is displayed.
if it is the problem then could you please give me some code to add quickly to test??
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.ImageIcon;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JProgressBar;
import javax.swing.JScrollPane;
import javax.swing.JWindow;
import javax.swing.Timer;
public class SplashScreen extends JWindow
private static final String IMAGE_PATH = "src/1.jpg";
private static final int UP_TIME = 15000;
public SplashScreen()
    Start();
public void Start()
    ImageIcon ii = new ImageIcon(IMAGE_PATH);
    JScrollPane jsp = new JScrollPane(new JLabel(ii));
    //JProgressBar Bar = new JProgressBar();
    getContentPane().add(jsp);
    setSize(853, 303);
    centerScreen();
private void centerScreen()
    Dimension d = Toolkit.getDefaultToolkit().getScreenSize();
    int x = (int) ((d.getWidth() - getWidth()) / 2);
    int y = (int) ((d.getHeight() - getHeight()) / 2);
    setLocation(x, (y - 100));
public static void main(String[] args)
    final JFrame frame = new JFrame("Main Frame");
    frame.setPreferredSize(new Dimension(300, 200));
    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    frame.pack();
    frame.setLocationRelativeTo(null);
    final SplashScreen splash = new SplashScreen();
    splash.setVisible(true);
    Timer swingTimer = new Timer(UP_TIME, new ActionListener()
      public void actionPerformed(ActionEvent e)
        splash.dispose();
        frame.setVisible(true);
    swingTimer.setRepeats(false);
    swingTimer.start();
}

Hello guys need help with reverse array

Need help reversing an array, i think my code is correct but it still does not work, so im thinking it might be something else i do not see.
so far the input for the array is
6, 25 , 10 , 5
and output is still the same
6 , 25 , 10 , 5
not sure what is going on.
public class Purse
    // max possible # of coins in a purse
    private static final int MAX = 10;
    private int contents[];
    private int count;      // count # of coins stored in contents[]
     * Constructor for objects of class Purse
    public Purse()
       contents = new int[MAX];
       count = 0;
     * Adds a coin to the end of a purse
     * @param coinType     type of coin to add
    public void addCoin(int coinType)
        contents[count] = coinType;
        count = count + 1;
     * Generates a String that holds the contents of a purse
     * @return     the contents of the purse, nicely formatted
    public String toString()
        if (count == 0)
            return "()";
        StringBuffer s = new StringBuffer("(");
        int i = 0;
        for (i = 0; i < count - 1; ++i)
            s.append(contents[i] + ", "); // values neatly separated by commas
        s.append(contents[i] + ")");
        return s.toString();
     * Calculates the value of a purse
     * @return     value of the purse in cents
    public int value()
        int sum = 0; // starts sum at zero
        for( int e : contents) // sets all to e
            sum = sum + e; //finds sum of array
        return sum; //retur
     * Reverses the order of coins in a purse and returns it
    public void reverse()
       int countA = 0;
       int x = 0;
       int y = countA - 1;                                          // 5 - 1 = 4
       for (int i = contents.length - 1; i >=0 ; i--)                        // 4, 3 , 2, 1, 0
            countA++;                                             // count = 5
        while ( x < y)
            int temp = contents[x];
            contents[x] = contents [y];
            contents [y] = temp;
            y = y- 1;                                         // 4 , 3 , 2, 1 , 0
            x = x + 1 ;                                             // 0 , 1, 2 , 3 , 4
}

ok so i went ahead and followed what you said
public void reverse()
      int a = 0;
      int b = contents.length - 1;
      while (b > a)
          int temp = contents[a];
          contents[a] = contents;
contents [b] = temp;
a++;
b--;
}and its outputting { 0, 0, 0, 0}
im thinking this is because the main array is has 10 elements with only 4 in use so this is a partial array.
Example
the array is { 6, 25, 10, 5, 0, 0, 0, 0, 0, 0,}
after the swap
{0, 0 , 0 , 0, 0 , 0 , 5 , 10 , 25, 6}
i need it to be just
{ 5, 10, 25, 6}
so it is swapping the begining and end but only with zeroes the thing is i need to reverse the array without the zeroes

I need help with uninstalling FP so I can install FP or some hemlock

I cannot get flash player to install, uninstall so that I can install, as all the instructions tell us to do. That insane crazy pop up that tells you to install FP, that you can only say no to so that it will go away is making me want to eat a bullet. I cannot take it much longer. I have no idea what to do. And, the crazy thing is that I did do something a couple weeks ago that made it all stop and then somehow it started again. Sux to fix something but not know what you did, so that you break it again. Anywho, I have tried everything from doing a manual install with the downloader, tried downloading an older vs, but I could not find one that was compatible with Vista, which is my operating system (32 bit). I did go to the hyperlink provided on another persons delimna and the site said that I have the most current vs of FP installed. But, it is not showing in my programs list nor is it in my files in my C drive, nor a trace of it in common files. It is not in regedit in local machine/software/adobe. I cannot find it, only the saved programs to uninstall or install it saved to desktop. Wait, I just rechecked my programs and features and it shows flashplayer 10 Actuve X and shockwave player 11.5, both of which are not found anywhere else in my computer. I am so weary of all of this. I just need help. Please, please please, It is horrible because you have to have fp to run certain programs, but it will not run and I do not know if this is a Adobe issue, Windows issue or a Vaio issue.

Hokay, I have Norton 360, it is run regularily, I also ran ESET this week, I use malwarebytes, pest patrol, registry repair. I took adaware and mcafee off my system as I was told that too many virus softwares conflict and can cause problems. I have had my email stolen, along with the book, it appears someone stripped my email and sold it to a spammer. It is not coming from my computer. Makes me very upset. I have turned this into the FBI cyber crimes site, AOL and Yahoo, since the link emails in the details are yahoo accounts. I get the spam emails as well. Ppl who click on the hyperlinks, some of them are getting viruses, but as I said, these are not being generated by me, but rather from the web. I hate these ppl. My system appears clean.
The pop ups are what everyone who is complaining about this issue are getting, I am assuming. I am seeing this complaint all over. Here is the information about the pop up:
It pops up with any navigation you try to do in IE....any. It will pop up ten times in a row during simple functions. Makes you insane. And the only way you can answer it is to click don't allow. End of story. over and over and over. If you research, web wide you are told to uninstall FP and then reinstall, and there are hyper links provided to do it with, and then you are told to try doing it manually with the Adobe downloader. NOTHING works. I am truly so upset, I cannot use my laptop, a storm surge ate my desktop and I am waiting on insurance to replace that the the iPad is limited. I have no idea which or what is the prob, IE, Adobe or Vaio, which is my make of computer. But, this is so ridiculous.

I need help with doing a system wipe/re-install

I want to completely wipe my Macbook Pro (running Mountain Lion) and do a OS reinstall so that it is as if it was just taken out of the box. I have already moved files I want to keep over to an external. My question is this, do I need to do anything in regards to Microsoft Office or iTunes? Do I need to deauthorize my iTunes or my Microsoft Office activation code? Also, how do I even go about doing this system reset?

Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
       A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
       B. Clone to an external drive using using Carbon Copy Cloner.
          1. Open Carbon Copy Cloner.
          2. Select the Source volume from the Select a source drop down menu on the left side.
          3. Select the Destination volume from the Select a destination drop down menu on the right
              side.
          4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
              sure to opt for that.
               Destination means a freshly erased external backup drive. Source means the internal
               startup drive.
Step Two - Prepare the machine for the new buyer:
          1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
          2, Remove any Open Firmware passwords or Firmware passwords.
          3. Turn the brightness full up and volume nearly so.
          4. Turn off File Vault, if enabled.
          5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
     A. Snow Leopard and earlier versions of OS X
          1. Insert the original OS X install CD/DVD that came with your computer.
          2. Restart the computer while holding down the C key to boot from the CD/DVD.
          3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
              Optionally, click on the Security button and set the Zero Data option to one-pass.
          4. Install OS X.
          5. Upon completion DO NOT restart the computer.
          6. Shutdown the computer.
     B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because
                   it is three times faster than wireless.
          1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
              Utilities window appears.
          2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
          3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
              on the Erase tab in the DU main window.
          4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
              and set the Zero Data option to one-pass.
          5. Click on the Erase button and wait until the process has completed.
          6. Quit DU and return to the Mac OS X Utilities window.
          7. Select Reinstall Lion/Mountain Lion and click on the Install button.
          8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

Need help: it keeps saying I'm not installing the latest version.

I'm kinda a computer noob so I don't really know what I'm doing. I'm the administrator of my computer. Whenever I try to download the latest version of flash at the end of the download it keeps saying that I'm not downloading the latest version (which I am) and it refrains from being installed on my computer. Can someone please help me?

the exact message I'm getting is
Adobe Flash Player ActiveX Setup:
The version of Adobe Flash Player ActiveX that you are trying to instal is not the most current version
Please visit http://www.adobe.com/go/getflashplayer to obtain the latest most secure version.
When I first go to download the flash player a thing called adobe download manager pops up, before it starts downloading it says it could not download mcafee sucurity scan, then the download bar for adobe flash player 10 fills up to100% then it says instalation complete, then I click on close download manager.
Then it takes me to another page and then at the top of the screen text pops up saying "This website want to instal the following add-on: 'adobe Flash Player Installer' "from adobe Systems incorportated" click to install if you trust this site" Then I click to install it. Then a window pops up and says windows needs your permission to continue then I click accept, then another window pops up and it says internet explorer add on instaler and it says "do you want to install the add on Adobe Download manager" then I click yes, then it brings me to the message I wrote at the top of this post: the not the most current version thing.
I never installed flash player 10.1 beta at any point in time
I went to the help section of the website but it couldn't help me.
The web browser I'm using is Internet Explorer.
My vista is 64 bit

Need help with rule, please. Want to calculate a sum of an accountlist...

Hello all,
i created some accountlists for accountclasses:
"Kontenklasse_2" is one of my accountlists and it contains all accounts wich begin with a 2 or H2.
So i have an account called "sum_kokl2" and for this i want to calculate the sum of all accounts included in my accountlist "Kontenklasse_2" but i don´t know how.
I hope someone can help me, many thanks in advance.
Martin
Edited by: user7324125 on 21.01.2010 17:06

Hello kostasn,
thanks for you post, i tried it but it doesn´t work.
I am sure that my memberlists are accurate, if i use one in my data grid, i gett all correct accounts which must be in the selected accountlist.
Perhaps the difficulty is where i want to calculate the sum. I try to describe more detailed:
I have an entity structure for our companies, for each parent of my entity structure i need a sum of all accounts which begin with a 2. So i wrote an accountlist which include all these accounts and named it "Kontenklasse_2". I try your written code and change the necessary parts. For this accountlist i only use the custom2 dimension all other is None. I don´t use ICP. The calculated account is named sum_kokl2 but neither my base entities nor the parent entities show me any values on the account sum_kokl2. So i think somewhere i forgot an important line in my rulefile.
Perhaps do you have another idea where is my bug? I´m happy for every help and idea.
Many thanks for every help in advance.
Kind regards / Best wishes
Martin
Btw my used Version is HFM Version 11.1.1.3, i used EPMA-Applications, the Windows-Client is installed to use the rules editor and SmartView 11 is already installed.

2 router help.. computer guy needs help

Hey everyone.. trying to isolate wireless on my network.
router one netgear setup as dhcp and ppoe to my dsl modem. would like to keep the wired network first on the netgear.
router 2 linksys wireless is plugged from netgear port into linksys wan .. would like to use this isolated from the 0.1 sub that netgear is putting out. so i have connected using 1.1 sub and it gets its ip and can ping from the routers internal ping test although the pcs cannont. it works if in gateway mode although i dont want the users to be able to ping my netgear network so i put in router mode to isolate . problem is that the pc cant get out.. tried some static routing with no avail and i think possible the double nat is causing troubles. i need to have dhcp on the wireless so i can get this icafe working and keep users of the network. i dont want to use the ap isolation in the adavanced tab because i think i shouldnt have to and should be able to get these beeachess (that bitches for u wonder) working like i have the plugged.. if you test u'll notice that the if in gateway mode the two networks can see each other (tell me why and i will kiss u- although must be some double nat or gatewaycrap ) ok thats the speel... which one of ya thinks that he can help.
i am leaving them in gateway over the weekend but if someone stumbles this they might get on the local network and figure how much i a charging them to get this to work
thanks
tony
bugeyed computer guy

Yes, you are on the right track. As stated in the included instruction manual, you will need to charge your iPod for four hours or until the display changes so that it shows a power plug (meaning that it is fully charged).
Also note that while your iPod is charging, you can also add songs and videos to it.

Need help in regarding Oracle PLSQL developer interview questions

Hi all,
I am totally new in this field regarding plsql. I have just finished training in oracle plsql and in oracle financials. But for starting career i am looking jobs as:Oracle plsql developer. Can somebody help me what type of questions people going to ask? I am not confident yet, i have made my resume but for submitting resume i just want to be aware for the interview questions. Can somebody help me in telling me good questions and answers as to what to prepare?
Thanks in advance.

1.
Do you have experience in Oracle 10g? If so, what are your favorite new features? (shows depth of experience and how well they are keeping up with technology)
2.
Partitioning (Practical Scenarios)
1.
Have you ever worked with partitioned tables? Example:
2.
What types of partitioning?
3.
What types of indexing, global or local? Why did you choose global or local?
4.
What do you see in SQL that is accessing partitioned tables that enables Oracle to take advantage of partitioning?
5.
What is partition pruning?
3.
PL/SQL Bulk Features
1.
Have you ever used PL/SQL bulk features? Which ones? Can you provide an example?
2.
What makes bulk processing faster?
3.
What PL/SQL data constructs are required to use bulk features?
4.
Oracle Collections
1.
What are the three types of collections?
2.
When would you use a varray versus a nested table?
5.
Global Temporary Tables
1.
Have you ever used Global Temporary Tables? Example:
2.
How does Oracle treat Global Temporary Tables differently than regular tables, making them faster?
6.
Autonomous Transactions
1.
What is an autonomous transaction? Example:
7.
SQL Tuning
1.
Someone comes to you with a SQL statement that is running slow, what are some potential problems that can be identified just by looking at the SQL statement?
2.
What are the steps you follow in the database to tune SQL?
8.
Locking Techniques
1.
Types of Locks
1.
Optimistic
2.
Pessimistic
3.
Lock Escalation
9.
Autonomous transactions, where to use examples if any
10.
Difference between Truncate and Delete Statement
11.
PL/SQL tables, index by tables, VARRAY, associate arrays, differences and when to use
12.
Performance tuning related, Using Explain plan, SQL* Plus auto trace, and using tkprof
13.
Different types of joins oracle uses ( Hash join, Merge Join, Nested loop join)
14.
Oracle SQL ANSI syntax ( JOIN USING, JOIN ON, LEFT OUTER JOIN,RIGHT OUTER JOIN etc..)
15.
dbms_profiler package uses
16.
Unit testing approach, if you know and worked on out PLSQL frame work for automatic testing, its big advantageous
17.
Oracle approach for read consistency, what is SCN, dirty reads, phantom reads etc..
18.
Standards ( Coding standards, naming standards etc.) , There are guidelines and naming standards for variables, package, procedure, function names, database object names etc…( Be prepared what standards you followed in previous projects )
19.
Snapshot too old error, fetch out of sequence error when it comes, should be able to explain.
20.
Oracle block, what it contains. Row chaining, row migration concepts
21.
Version control software’s (experience in clearcase and clearquest is big advantage). If you have not used these, know about the importance of these and be prepared to explain which ones you used in previous projects, and how the PL/SQL code used to deploy.
22.
Oracle server architecture, know about oracle memory structures, background processes overview

Need help in regards to combining pdf files.

I have created multiple pdf files (pages). I am merging the files to create one document and do not want to create a package. I want one continuous file. I have done this before without any problems, both using the combine files feature and manualing inserting pages. Several pages have the same "text field" name so that when I type data onto page one, it will duplicate onto subsequent pages with the same field names. Like I said this has never been a problem, but now I am experiencing a roadblock. Now, when I merge the pages together, any field that is duplicated on subsequent pages, has its name arbitrarily renamed by Adobe and when I click on text field to rename, the change will not save. I am using Adobe Acrobat 8.0 Pro. Any help will be appreciated.

This is actually exactly the same problem I've had, and it's what prompted me to post today's question about making fillable forms nonfillable.

Guys need help is regarding games. I want to install games like commandos, gta vice city, counter strike etc I mean action games in which we do levels, like games in playsatation and xbox ?

Similar Messages

Maybe you are looking for