Guys need some assistance!

Hi.. before i purchased the nano i had previously had a ipod mini,the ipod mini came with a ipod udater which was "24/03/05", when it came to placing the nano updater on the comp i had loads of problems.
1)ipod would not appear in the load up part of the update even when "do not disconect" was displayed and new hardware was found.
2)the ipod could not be formatted to comp. as i mentioned i had previously had another updater on comp. this i felt was interrupting play with the new one i tried installing.
3)ipod support hasnt helped in the slightest, as most options refer to reseting or deleting.
My problem is i dont have the old updater to Uninstall 24/03/05 updater
ne suggestions or advice?

Dunno how to fix the connexant... but may I suggest an Expresscard adapter like this:
http://www.echoaudio.com/Products/ExpressCard/index.php
there are 2-3 brands available that cater to the pro music market. Some googling will find them I'm sure.
Nap.

Similar Messages

  • New to Flash CS5. Need some assistance.

    Hey,
    I want to learn flash cs5 and before that I had some queries:
    Some of my friends who are java programmers told me I need to know programming in order to learn flash. (Action scripting) I honestly don`t know any programming, so is it possible for me to learn flash? I will be using flash to make simple animation, like moving a car, smoke, clouds etc.
    So I am good with photoshop/after effects and have a good design skills.
    Any assistance would be appreciated.

    Thanks for the reply.
    So as I told I have zero knowledge of programming, still I will be able to do animations in flash? Also as I told I am good with maya/photoshop/after effects.
    So if programming is not needed to learn flash, what are the advantages of using flash if we already know actionscript?

  • Need some assistance with multiple problems (8330 Curve)

    Hello all,
    I am recent buyer of an 8330 (Verizon). I like it a lot and find it a very useful tool. Being new to the BB world, I do have some questions, that I cannot find answered on any of the BB forums.
    So here they are:
    1. I have two e-mail accounts setup on my BB. So this means that I should have only two e-mail options under applications. I have three and the third one seems to get messages from both of my two other accounts. What is also weird is that there is no e-mail header on the top (like with the other two e-mail folders). How do I get e-mails to stop going in to this folder and basically delete it? The other strange thing (that I just noticed is that this generic e-mail box gets some e-mails that my other two accounts never see (even though they have their correct e-mail address on them)!
    2. How do I create sig lines for my e-mail accounts? I have read the help pages, but the instructions they give me for creating signatures on my outgoing e-mails does not work.
    3. Does the new 4.5 SW upgrade allow me to use the GPS capability with my phone? I bought the download Garmin SW for my phone ONLY to find out later that Verizon has blocked this feature! It should would be nice if either VZ or Garmin would have made that crystal clear when I got my phone. :-(
    Thanks much for all the assistance!
    Grant

    1.  That is the "Messages" folder.  It is a dumping ground for ALL messages including all emails, sms, mms, pin, BBMessenger (if selected) and any others like Browser messages, etc.  You can't stop messages from going there but you can hid the icon, if you like. 
    2.  To create signatures for email you have to use the BIS logon from your PC.  Use the link below to do this:
    https://bis.na.blackberry.com/html?brand=vzw
    3.  Upgrading the OS does not allow you to use the GPS with other software like Garmin.  This is a Verizon lock and there is no way around it.  They want you to pay for their service.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Checked FAQ: Question about importing into library, need some assistance.

    Hi,
    I've done some searching and have yet find my answer. I hope that some of the sharpshooters here can help out.
    I keep all of my music on a network drive to avoid "bloating" my Mac with music. So the other day, I wanted to use iTunes to catalog what was on there and to load some more music onto my 'Pod. So, I performed an import of the library. Here's my dopey question: When one imports into a library, does all of the music come over with it, or, does just the songs' data get imported and then point to the source drive? Does this make sense?
    TIA,
    Chris

    I also keep my music and all on an external drive. Before you catalog it you need to do one important thing or it will copy everything to your computer. Go into the Advanced setting under Preferences and uncheck *Copy music to your iTunes Music folder when adding to library*. If you don't do this you will end up with your music trying to be put on your computers drive. You can then use this to update your iPod as it points to the original file and will bring anything needed to load on your iPod.

  • Need some assistance in binary streaming and reading

    Hi,
    altough I studied the examples delivered with LabView (my current version is 6i) I have some challenges to face and I hope someone could help me. This challenges
    may be simple for professionals but I'm not already that experienced. I have an one channel AI input via a DAQ-card (E-series) and I want to write it to a binary file with only the really necessary headers. The data then stored in the binary shall than be displayed after user request to a graph and my client wants to have the possibility to srcoll through the hole stored data to seek some charakteristiks and then mark the area of interest with cursor to move this area to another graph for further analysis. My program is structured in a way that in a whi
    le loop I wait for user interaction i.e. buttons for saving and displaying data. It's for that, that I think I have to split the binary streaming in a sub-Vi that makes the needed preparation and another sub-Vi assosiated to the first that makes the file writuing and thats placed within the loop described above. Maybe I'm with my thoughts on the woodway and someone has better ideas. I tried many things but the result were always frustrating. I would be glad someone could give me some hints based on experience, and not just saying "Look to the delivered examples" as I already read in questions from other users. Thanks for your support.
    Chris

    I think you're going at this in a good way. One issue I see is that you are using version 6i and waiting for user input. Since Event Structures were not available in 6i, you will have to poll for user input and that could make your application slower. An upgrade to 6.1 would help you there.
    Besides that, I like your ideas. If you're sticking with 6i, use a case structure inside your while loop which executes a particular case based upon which button the user pressed. Then, in these cases, call the subVIs which you built. I hope this helps out.
    J.R. Allen

  • Hi, need some assistance over here.

    Hi guys, can i check with you guys wha
    t does this source code means?
    <?xml version="1.0" encoding="utf-8"?>
    <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/halo" creationComplete="init()" minWidth="1500" minHeight="1000" height="859">
        <mx:DataGrid x="19" y="368" id="playlistgrid" width="289" height="147">
            <mx:columns>
                <mx:DataGridColumn headerText="Name" dataField="name" width="180"/>
                <mx:DataGridColumn dataField="starttime" headerText="Start" width="50"/>
                <mx:DataGridColumn dataField="endtime" headerText="End" width="50"/>
                <mx:DataGridColumn dataField="livesource" headerText="DVR" width="50"/>
            </mx:columns>
        </mx:DataGrid>
    <mx:DataGrid x="20" y="38" id="sourcegrid" width="289" height="126">
            <mx:columns>
                <mx:DataGridColumn headerText="Name" dataField="name" width="200"/> 
            </mx:columns> 
        </mx:DataGrid> 
        <mx:Label x="18" y="16" text="Source files (on Demand)"/> 
       <mx:DataGrid x="20" y="195" id="livestreamgrid" width="289" height="74"> 
            <mx:columns> 
                <mx:DataGridColumn headerText="Name" dataField="name" width="200"/> 
            </mx:columns> 
        </mx:DataGrid> 
        <mx:DataGrid x="17" y="570" id="outputgrid" width="289" height="207"> 
            <mx:columns> 
                <mx:DataGridColumn headerText="Name" dataField="name" width="200"/> 
            </mx:columns> 
        </mx:DataGrid> 
        <mx:Label x="15" y="548" text="Exported highlights (for on-demand CDN)"/> 
        <mx:Label x="18" y="174" text="Live DVR streams"/> 
        <s:Button x="19" y="312" label="Set In Point" id="setin_btn"/> 
        <s:Button x="107" y="312" label="Set Out Point" id="setout_btn"/> 
        <s:Button x="19" y="339" label="Add selected clip to Playlist" id="addtoplay_btn"/> 
        <s:Button x="21" y="519" label="Generate on-demand file" id="generate_btn"/> 
        <s:TextInput x="19" y="284" width="83" id="inpoint_txt"/> 
        <s:TextInput x="106" y="284" width="93" id="outpoint_txt"/> 
        <s:TextArea x="216" y="284" height="21" id="currenttimecode" editable="false" textAlign="center" width="90"/> 
        <s:TextArea x="17" y="785" width="370" id="status_txt" fontSize="12" height="63"/> 
    Despite this source code was copied from the tutorial guide, when i complied it to flex 4, I'm having errors on those line in bold and red.
    My question would be,
    Firstly, what does this whole source code means? Can any kind soul help me out?
    Secondly, what does the error means? The error code reported was :
    "Could not resolve <mx:DataGrid> to a component implementation.

    This mxml-code layouts some flex components... DataGrid is a table like DataContainer which is organized in rows and columns.
    The DataGridColumn defines the Data presented in one of this columns. The error you get usally means that you are missing the
    import statement for the datagrid-component(import mx.controls.DataGrid;). My advise is that maybe get a book about the new Flex 4 Framework(because a lot has changed and most tutorials, in my opinion, are outdated now) and invest some time to get you head
    around the very basics of flex before starting with this web tutorials.
    All the best.

  • HT201441 Hi, me need some assistance with unlock

    Can I contact with somebody , who can assist me with my telephone.
    I new owner telefon, but previous owner didnt tell ID and password.
    And now I cant turn on telefone. Telephone is not stolen , and I can give you all information.
    You see this Phone was not stolen. Name previous owner is Cedric Arndt, hi is from Germany, City is Oberhasen. From this date when I buy item I can contact with owner.I dont know what happened with HIm.
    On box all numbers
    MD235D/A Iphone 4s, Black, 16GB
    Apple in California
    ModelA1387
    Part No: MD235D/A
    Serial No:D*****************0
    IMEI/MEID 0****************3
    Number under cover box: 602-7519-A
    Number on battery:Model A1387 EMC2430 FCC ID:BCG-E2430A IC:579C-E2430A
    I cant recover Cedric ID number, because I know only half.
    My accaunt in apple store is opened. Now you know all information which I have on this moment, because if I not unlock this phone me need contact with ebay and send this phone back soon as possible.
    Kind regard
    Aleksandrs
    <Personal Information Edited by Host>

    You should not post your email address and all this information on the phone - it's and invitation to spam and a security risk. I've asked the Hosts to remove them.
    Only the previous owner can unlock your phone. Apple cannot help you (and you are not talking to Apple here, this is a user-to-user forum). You need to contact him and get him to remove the phone from his list of devices, and get him to unlock it. Without this you cannot use the phone.

  • PC upgrade...... Been a while....... Need some assistance.

    Hello,
    It's been a while since I upgraded my PC and am a bit behind on things.
    Here's what I installed:
    OS: XP Professional
    CPU: Phenom 9600 2.3Ghz AM2+ x4 L2+L3=4Mb, 95W, 65nm
    MB: MSI K9N2 SLI Patinum nForce 750a, BIOS=V3.5 current
    RAM: 4GB Patriot Viper EPP PC-6400 800Mhz (4,4,4,12)
    Video: 2x GeForce 6600GT 512MB PCI-E
    PS: New 550W
    Everything on "Auto" in BIOS.
    The good news is that I'm using it now. The problem is games, it seems to be slower than the old configuration?
    I have to turn everything down to minumum or to off to prevent lag. Real disapointed having invested time and $$$ to upgrade.
    There must be something not set right. The old configureation was a AMD dual core with one video card and 2MB of memory. I swiched from SLI mode to one graphics card and it seamed to be the same? I mean.................... damn........... what gives? Where's the bottle neck, Anyone with any ideas????????
    Also - What is SVM and it's purpose, can't find it with search.
             I can't adjust voltage in BIOS. I can highlight but can't change?
    Gary

    Quote from: Gster on 06-October-09, 08:59:27
    The GTX260 I have requires min of 500W with 38A on a 12V rail. It has (2) 12V rail connections.
    That's 550watts 38A suggested system wide, as Mike said, containing a card of that design, but nonetheless you done good.  Who knows what you'll want to add to your system in the future and what type of demands they'll place on your PS.  That supply will do it. 
    Quote from: Gster on 06-October-09, 08:59:27
    I'm wondering with all the heat being generated now I might need to get better cooling for the PC, CPU (stock fan from box)
    What are temps?  Idle and full load for cpu, gpu, and chipset?  Use some type of burn in test to load system to report full load temps.  Folding@Home works very well to stress test and it furthers medical research to boot.(Consider joining MSI HQ's team) Monitor temps voltages, timings, and temps with Everest or the like.  Other programs of interest are HW monitor, CPUZ, Core Temp.  Check out the stickies in the overclocking forum for links to these and other programs that might interest you.  You sir, are about to have a whole lot of fun.

  • Need some assistance in Verizon iPhone 4S unlock

    I've recently moved overseas from the US. Prior to leaving I requested an international unlock from Verizon. I have been a customer in good standing for the past 10 years and have an iPhone 4S on iOS 7.0.4. They assured me the phone was unlocked and all I need to do is insert an international SIM card and I should be good to go. I purchased a prepaid sim from 3 mobile in Ireland, restored the phone thru iTunes and received a sim invalid error, stating the phone was most likely not unlocked. I contacted Verizon who once again assured me the phone was unlocked and it must be a faulty SIM card. I contacted 3, they told me it could take 24 hours to activate the sim. After 24 hours and the same error message I was told by 3 to return the sim and get a replacement, that the sim may be faulty. The agent at the phone store tried a different sim from vodaphone and received the same message. Now I am phone-less and verizon is telling me there is nothing that can be done. They mentioned if I was in the states that I could bring the phone in and they would put it through a machine to unlock it? Is that even true? My options are to buy a new phone for hundreds of dollars or wait till I return to the states on vacation. Does anyone have any advice or can offer some guidance as to what I can do next. I would like to continue using my current phone. I've heard of people having issues which is why I was so proactive about contacting verizon prior to my trip. I have tried restoring the phone numerous times, it now is acting somewhat glitchy. I was told the phone could be jail broken but not with the iOS it is on and I don't want to pay for something yet that I don't know will even work or can be done. Any information is greatly appreciated. It's getting more difficult to function without the ability to make phone calls.

    No one other than Verizon can do anything about this.
    There is no "machine to unlock it". Unlocking is done by restoring the phone in iTunes.
    Try restoring it again. If that doesn't do it, contact them again.
    Jailbreaking can not be discussed here at all. It will void any warranty you have and forfeit all rights to support.

  • Switching from Comcast - Need some Assistance

    I have been a Comcast subscriber for many years now, but have heard that FiOS is supposed to be better. However, there are a few things that make me somewhat ambivalent about switching. First off, I've had Comcast for years, and have had a few issues with them, but not THAT many. So I don't know if it'd be worth it to change, since a new provider might not be as good. But also, I noticed that carriage of local channels is different on FiOS than it would be on cable, since I would assume it would be the same throughout the entire market. For instance, in the Boston area, some communities near the Rhode Island border receive Providence channels as well as Boston on cable, but not on FiOS. I've also heard that FiOS' On Demand selections are rather different. I know there's tons of movies on demand, but what about TV shows, and local events? I also saw a post here from someone who doesn't get local weather on their system. So I've heard that in a way, FiOS is more like satellite than it is like cable.
    Anyway, I'm sure that many of you here who now have FiOS TV have switched from cable, and let me ask you this: Have any of you ever considered switching back? Why, or why not? 

    fair question.
    I switched from comcast to verizon at the end of last year.
    my sole reason for switching was due to savings of $40/month.  To me, the quality, speed, and service appears to be the same (or hardly noticeable to make a significant difference).
    the main advantage for switching to FIOS is money.  Some small advantages FIOS has over Comcast is some of their local networks on-demand content.  I believe that Comcast only provides CBS while Verizon offers ABC, NBC, and CBS (neither carry Fox on-demand).
    the main disadvantage to me is that you do NOT need a set-top box to get all of the channels with comcast.  a simple splitter will suffice.  for FIOS, you need to rent the box for each tv or else you will not get a picture.  another disadvantage is that the free movies on Comcast are far more vast and far better than Verizon.  However, Verizon is aware of this and are slowly adding more content throughout this year.
    As for customer serivce, it's hit or miss with both.  You'll read many horror stories and happy stories from both sides, so to me, that's almost a risk or expectation with any paid service.
    that being said, FIOS has made considerable advancements in technology in their internet and cable service over the past few years while keeping the costs to the consumers down.  comcast, on the other hand, has not made any significant technological advances (at least none that I know of, although they do claim to double your internet speed every year, but so does everyone else).
    thus, even though I must rent a box for each of my 6 tvs, I'm still saving $40/month, but we'll see what happens when the 1-year promotion ends this december.
    You've got to be very careful if you don't know where you're going, because you might not get there. --Yogi Berra

  • HT1384 My lock screen/power button on my iPod Touch is broken, and I need some assistance.

    As the title suggests, I can not use the lock screen/power button on my iPod Touch, it is broken. I can use Adaptive Touch to turn the screen on and off at will, and also turn my device off. But if I turn it off, I don't know how to get it to turn back on. Could I just plug it into a charger and turn it back on, or would I need to plug it into my computer? Please help, in a few days I won't have access to it for 9 weeks, I need immediate help.

    If you power off the iPod, it will turn back on if you connect it to a charger like a wall charger or a computer. I just checked with a charging source to confirm. I knew it did it with a computer.

  • I need some assistance on stopping my backspace key from "sticking" on my iPad 2?

    I have reset, restored, and rebooted. Nothing is working. My backspace key goes rogue even if I only hit it once. I've had this pad for 3 days and I'm a bit frustrated. I've noticed that the backspace key goes haywire in almost all third party apps but it also happens when I type email, calendar , events, and notes. The only way I can stop this from happening is to hit the spacebar multiple times or any other key on board. I am not new to Apple products as I have had several iPhones, iPod touches, and I had a Mac Book Pro for work. I have searched the communities and saw that this was an issue with earlier iPhones but I have not read anything to iPad 2. Any helpful assistance you can provide is appreciated.

    I assume that you know if you hold down on the delete/back space key that it picks up speed and will rapidly delete sections of text as opposed to one letter at a time.
    If you have restarted and reset (hold down the sleep and home buttons until the Apple logo appears) and have had no success, I can only suggest closing apps. Go to the home screen and double tap the home button to bring up your recent apps at the bottom. Tap and hold down on any app icon until they all wiggle. Tap the minus signs on the apps to close them. Close every app in the task bar. Tap the screen above the task bar and then restart the iPad.
    I have no idea if this will help, but it can't hurt to try it. If your iPad is only three days old, I would also suggest a call to technical support. You get 90 days of phone support when you buy an iPad.
    http://www.apple.com/support/ipad/contact/

  • Remote Site with its own CUCM Sub#2 and Router network failed and the site didnt keep its phones active, need some assistance

    I have a Pub and 2 Sub's.  Sub #1 is with the Pub, at the main site it is our TFTP server, Sub #2 is at a remote site with about 100 users along with a router and 2 PRI's for outbound calls.  We had a network failure between the main site and the remote site and all phone lost their registration with the system until we were able to get the network back up.   Currently the network is up in a crippled state on a 1 T-1 link while we troubleshoot the bigger issue with our 6mb pipe, however Sub #2 and its associated router arent talking with the PUB or other Sub.  I'm still getting alerts every 30 minutes stating they are the server is down.  I'm sure once the network is corrected this will bring everything back on line.  My question is how can I prevent in this in the future.  I need this site to be stand alone if the network goes down again.  I was told by our vendor that if we had a subscriber at each site then we would need SRST licensing. I know something needs to be configured to make it all work, I'm just not sure what.

    I already have a group at the site but it includes both the Pub and Sub from the main site as well as the Sub from the remote site.  I would only have to remove the Sub from the main site, problem is I currently only have 1 TFTP server it runs on SUB #1, should I make SUB#2 a TFTP server as well and the phones are setup for DHCP at the main site, I'm going to need to have a DHCP server setup at the remote site as well. Correct?

  • I Need some assistant and HELP with my iPod Touch  soon

    Note: Look up above at the Top to read my Problem that I am having with my iPod Touch.
    Can Someone Please HELP ME with my iPod Touch, I am running out of patience, normally when I do need help here I usually get help and a reply within ONE day, but I have posted my problem YESTERDAY, why isn't there someone not replying to my request?? I am getting 55 views but no replys, isn't there anyone out there that can help me??
    I need HELP to reset my IPod Touch to where I had it when I was able to send emails. (can't send emails anymore from my iPod Touch)
    I want to be able to sync and send my iPod Touch sent emails info. to my Computer email program, does anyone know how to do that?
    PLEASE HELP ME AND REPLY if you can solve my problem ASAP.
    Trisha Foster

    Agreed! If you want help soon, call Apples paid support line. Now while you were waiting for us to slowly get around to answering you, you could have downloaded the manual for the ipod, so that you understood the function of the mail sync options in itunes. Mail sync only copies the settings needed to access your mail servers, from the mail client on your computer, over to the ipod touch. It does not copy any actual mail messages, and does not copy any settings from the ipod back to your mail program. The advanced section is meant to be used if you have messed up the settings on the ipod itself. It will ignore any changes to bookmarks, contacts, or mail settings depending on which you check, and will copy new information to the ipod. So in your case if you are able to access, and send mail correctly from the account on your mac, then clicking on the sync mail account button in itunes as well as the replace info on this ipod whatever in the advanced section should transfer over the correct mail account settings to your ipod.

  • DIY Macbook Pro 13" with Esata... need some assistance

    So via a HDD Caddy in my DVD Drive I have been able to add Esata to my Macbook Pro 13", a cable running from the sata port out to an Esata connection.
    Its seems to work... sometimes, and I wondered if someone might bring some light to the situation.
    So I have discovered that the drive will only mount if the Esata drive is turned on from startup. I have 2 Esata enclosures, one GDrive enclosure, one Astone Dual Bay drive dock. The GDrive will only boot/mount certain drives, so far I have only been able to mount an old internal 160GB Hitachi from my old Macbook. I am hoping to put a 2TB Western Digital Green into this enclosure, but so far have been unsuccessful getting it to mount.
    The Astone Drive dock will mount only one of the 2 bays, I think its the (Source) bay. I would love to have this loading both bays as it will be great for fast transfers on film shoots.
    Ive kind of reached the extent of my knowledge and am a bit stumped, and can't seem to find much online. If someone could help me out that would be awesome.

    Hi there,
    I'm afraid I can't answer your question, but I'm looking to do exactly the same thing as you - rip out my superdrive, and take advantage of the SATA connector to hook up an external hard drive that has an eSATA connection. I was planning on also buying a Seagate Go Flex Thunderbolt adapater to connect to another external hard drive to take advantage of my Macbook's thunderbolt port (have you considered this option?)
    Now my question to you is how did you go about connecting up an eSATA cable to the SATA port in your Macbook? I've been looking at the HDD caddy option, but I would really like to use my 3TB eSATA external harddrive at full speed, and as far as I can tell it doesn't seem any SATA to eSATA cables would fit through the small slot in the Macbook case where you put CDs/DVDs into the superdrive. If you could give me some more info on how you went about adding an eSATA connection in place of the superdrive I would be very grateful!
    Thanks

Maybe you are looking for