Guys Plz help urgent Phone memory is 0
i recievd a song from bluetooth and it has been saved but it reduced phone memory i tried to fing that song inthe phone memory but not found in phone memory plz tell me the locations so i can transfer to mass memory or bluetooth and can u plz tell me how to change the path of recieving anything means i received from bluetooth i want that it should be go to directly to massmemory folder .
OR
any one can tell me how to transfer the song from phone memory to mass memory
Solved!
Go to Solution.
1) For your phone memory to be 0 you must have apps and everything stored there on C: and not utilising the mass storage E:.
I agree with matt_t that is how it is done when using bluetooth so havent a clue whats going on there.
2) Have you tried plugging your phone into your PC via USB and exploring your N97 throught my computer if using windows and double clicking the N97 icon.
Looking for the C: Phone folder and finding the song and dragging and dropping into E:mass memory music folder????
OR drag from your C: to your PC and dragging back to E:mass memory Music Foler if the above doesnt work.
BUT 1 song is usually on around 3MB so you still have issues with 0 memory.
3) If all your apps are stored on C: why dont you uninstall them and install onto your E:mass memory.
4) Internet i havent a clue about but with your memory so so low thats the least of your problems at the moment.
Thats all i have to help with i hope you find your song and your memory increases.
Message Edited by matto73 on 17-Oct-2009 05:45 PM
Nokia N97 Unbranded RM-505 [0585162]
Firmware 21.0.045
It's NOT about the Kudos they just make my day, hit the Star if I Helped.
Similar Messages
-
well i set a passcode on my iphone 4 and ive forgotten it i have no idea what to do and i only just got this phone plus i dont want to do these bypassing with emergancy call just in case i get it wrong plz help (urgent)
If you set the phone to erase on 10 failed passcodes - then just keep typing and it will wipe itself.
Otherwise I believe you can set it to recovery mode and restore etc.. via iTunes... There is no easy way as the passcode is designed to protect the phone exactly against what you are trying to do now...
http://osxdaily.com/2011/01/08/iphone-recovery-mode/
Others may have some additional tips !
Sorry for the probs you are having...
Regs Neil -
why can't i connect to my iphone after updating to 7.1.1? i don't even get the screen that lets me login into my apple account??? plz help my phone was stolen and through help of the police i recovered it and now i can't access my phone
You must have had find my iPhone on, or it was locked by your phone carrier.
Call your our cell carrier first.
then log on to a computer to iCloud to erase your iPhone.
NOW... You will be able to setup with a backup. -
Plz help my phone E50 is not starting due to softw...
plz help my phone E50 is not starting due to software update it just blinks Screen & go off....
when 2 min. left for completing the update it goes off & now its not starting...
Plz help is it repairable?
Thanks
Usman KhanI do not know the E50 but this helped people who had similar problems with other phones.
If this fails ..you need to find your nearest Nokia Service centre to re-flash your FW.
http://www.allaboutsymbian.com/support/item/When_everything_goes_horribly_wrong_in_Nokia_Software_Up... -
Ip to location ......plz help urgent
Hi all,
i need a code which finds out/tracks IP address of a machine and based on that it helps to find out which country it is.i mean based on specific IP ,i get to know country and on that basis Locale can be set.Ultimately when the page renders it shows that county language.
Plz help me out to solve out this issue and its urgent.
Any materials(tutorials,sample code) would be quite helpful for me.
Thanks in advance.Hi Frank
Thanks for ur reply.
Yes its a web application but as i had described above i need to set locale/multilingual on the basis of users ip.ip will tell the location and after that locale can be set.
Plz tell me desired sol.
Thnks -
i dont know whats wrong with my n900.... a couple of weeks before i tried to install nitroid gingerbread on my n900.... i did exactly what it said it was almost complete but the last step didnt complete so i left it like that..... i was using my mobile fine until one day i restarted my phone... when it started it showed me 2 options (dont remember what the options were) although the 2nd one was power kernel something like that.... i chose 1st option after that it turned off when i startit again only nokia logo comes and it turns off by himself.... i thinki bricked my fone... but y didnt it happen when i was trying to install nitroid... plz help any way to fix it....
P.S. I cant flash it either.. it doesnt go to usb mode anymore neither does it charge....
Solved!
Go to Solution.you could try to do the commands in flasher, connect the device while it is off and holding the U button down and see if the flasher will see it.
-
UTL_FILE help..Plz Help urgently
CREATE OR REPLACE PROCEDURE test_file
AS
n_output_file_handle UTL_FILE.file_type;
/**************************Beginning of the procedure **********************/
BEGIN
--DBMS_OUTPUT.ENABLE(2000000);
DBMS_OUTPUT.put_line('p_utl_dir:');
DBMS_OUTPUT.put_line('c_output_file_name:'|| 'test.txt' );
n_output_file_handle := UTL_FILE.fopen ('C:\MPPI','test.txt','w');
UTL_FILE.put_line (n_output_file_handle, 'test1');
UTL_FILE.fclose(n_output_file_handle);
I have this procedure to write text to a file. I execute this on my own machine but it does not write to the file.I exceute it from SQLPlus by execute test_file();.It says proc successfully completed but nothing is written to text file.
Could somone plz help me with this urgently.Hi, what is the value for the parameter UTL_FILE?
You use an absolute path for the directory to write to in you r procedure.
If you would use a directory object in the database to specify where to write to you would not need to set UL_FILE parameter.
Regards,
Lutz -
I want to have 3 tabs say Tab1, tab2, tab3 in my page and based on which tab is clicked , I have to display the contents of a table.
Ex: if Tab1 is clicked, i have to display contents of Table1 and tab2,table2 and so ...
Plz help with how to link the click on the tab to calling of the JSP file which retrives and displays the data???....
Its urgent ;plz helpdnamiot ,
I'm also looking for similar funcitonality.
the URL mentioned in your reply is not free ware. you know, it is tough to convince management to buy a software for the project even it is $1.
So if you know any taglibrary which is free ware , which generates maximum of 4 tabs and dynamic in nature, please let me know.
Thanks in advance
tekbond -
plz help after the last update of the software my iphone 5 shows" no servise" no signle. plz if u offer a new update to fix this bug.
I would restore the phone as new
iTunes: Restoring iOS software - Apple
then get it replaced through apple -
Binary addition,subtraction and modulus...plz help urgent
plz help me on this query...
i need to pass two 512 bit number as string,then convert them to binary and
then perform binary addition,subtraction,modulus operations on those two numbers.finally convert result to integer.
i designed a code which doesnt work correct.it is:
* To change this template, choose Tools | Templates
* and open the template in the editor.
package bytearrayopeations;
import java.math.BigInteger;
* @author sheetalb
public class binaryadding {
public static void main(String[] args) {
BigInteger a = new BigInteger("123456");
BigInteger b = new BigInteger("5121");
String bb1 = a.toString(2);
String bb2 = b.toString(2);
String ss1 = null;
String ss2 = null;
String result = "";
String carry="0";
System.out.println("first value=" +bb1);
System.out.println("second value=" +bb2);
int k=bb1.length();
int h=bb2.length();
System.out.println("length 1="+ k);
System.out.println("length 2=" +h);
int p=h-k;
//System.out.println("difference=" +p);
int q=k-h;
//System.out.println("difference 2=" +q);
if(h==k)
else if(h>k)
for(int i=0;i<p;i++)
bb1="0"+bb1;
System.out.println("new value of first=" +bb1);
else if(h<k)
for(int i=0;i<q;i++)
bb2="0"+bb2;
System.out.println("new value of second=" +bb2);
StringBuffer sb1=new StringBuffer(bb1);
StringBuffer sb2=new StringBuffer(bb2);
bb1=sb1.reverse().toString();
bb2=sb2.reverse().toString();
//System.out.println("rev. buffer1=" +bb1);
//System.out.println("rev. buffer2=" +bb2);
for(int i=0;i<bb1.length();i++)
ss1=bb1.substring(i,i+1);
ss2=bb2.substring(i,i+1);
System.out.println("value1=" + ss1 + " " + "value2=" + ss2);
if (ss1.equals("0") && ss2.equals("0"))
if (carry.equals("0"))
result+="0";
else
result+="1";
else if (ss1.equals("1") && ss2.equals("1"))
if (carry.equals("0"))
result+="0";
carry="1";
else
result+="1";
carry="1";
else if (ss1.equals("0") && ss2.equals("1"))
if (carry.equals("0"))
result+="1";
carry="0";
else
result+="0";
carry="1";
else if (ss1.equals("1") && ss2.equals("0"))
if (carry.equals("0"))
result+="1";
carry="0";
else
result+="0";
carry="1";
System.out.println("sum=" +result + " " + "carry" + carry);
result+=carry;
StringBuffer sb3=new StringBuffer(result);
result=sb3.reverse().toString();
System.out.println("result is " +result);
System.out.println("Binary = "+ result + ", Decimal = "+Integer.parseInt(result,2));
}plz provide me or email me if possible java coding for all three operations as soon.
[email protected]One thread is enough. Continue here:[http://forums.sun.com/thread.jspa?threadID=5373720&messageID=10643157#10643157]
-
Under company code 7245 I m doing stock transfer from 7245 plant to 7246 plant
supplying plant 7245 recieving plant 7246 ccode 7245
n sales area in supplying plant is 7245-7a-7a
now in this sales area ive created a customer 7246 to represent recieving plant
on the oher side in 7246 ive created vendor 7245
now in
SPROMMPO-SET UP STOSHIPPING DATA
for plant 7246 ive given cust num plant:7246 sales area 72457a7a
and
for plant 7245 ive kept cust num plant blank
and sales area 72457a7a
n shipping point det in 7246 cust mast shipping cond is 7a
loading group in material is 7245 for plant 7245
and for material in 7246 the lopading group is 7246
the shipping pt det is as follows
7a-724572457245(shipping cond-loading group-plant-shipping point)
now when i m creating po in me21n
i m getting warning message
ship point 7245 not allowed for ship cond 7a loading group 7245 plant 7245
its only a warning
but it is picking up 7245 as shipping point
now vl10g is also fine
i m getting the delivery doc number
n vl02n and migo is fine
now
my doubt is
wat r the settings so that i can do both ways
see with the above setting i m able to send stock frm 7245 plant to 7246
but i m not able to configure stock transfer from 7246 to 7245
mainly i wan settings @ SPROMMPO-SET UP STOSHIPPING DATA
i ve created customer 7245 in 7246-7a-7a
and vendor 7245 in purch org 7246
cant be both settings be standard
so that stock can be sent any ways
because both plants belong to same ccode and stock can be ransfered both ways,is this scenario possible??/
or sto is only one way ??
plz clarify
i ve already spent a lot of time on this plz help me out.
anil
Edited by: anil singh on Mar 12, 2008 5:37 PMHi,
Create the customer in the delivering Sales Area/Plant/CC and assign this customer to the recieving plant in the MM> purchasing> STO> Setup STO> Shipping data for plants.
Assign the delivering plant's salea area also here. So you need to create a customer in 7245 and assigne it in 7246.
Create the vendor in the purchase organisation of the receiving plant and assgin the delivering plant in the vendor master. Maintain the document types correctly and define whether you require one step or two step procedure.
hope this will help.
Prase -
i'm using Nokia N73 Music Edition with 2GB memory card. My problem is that sometgime my phone inform that my memory is fuu and need to delete some data. Dont really understand what it mean. I also like to know how to manage my phone memory.
please remove the memory card and then format the unit using code *#7370#.note all ur data in phone ie contacts messges and calendar note u created will be deleted.
-
Ora - 00600 error plz help urgent
hello all sir plz. help would should i do.
by mistake i made changes in spfile file.... after that i got this error
any solution ?
plz. help sir
SQL> create pfile from spfile;
create pfile from spfile
ERROR at line 1:
ORA-00600: internal error code, arguments: [733], [538970164], [pga heap], [],
help sir
waiting for replyfirst of all
thanx for my reply
sir i have bkp through rman but when i am connect to rman it give me error
2. i have no pfile<sid>.ora file
3. i try to start my database through pfile text file i got error..
plz. reply sir what should i do.....
how can i connect rman....
C:\>set oracle_sid=db01
C:\>rman target sys/oracle@db01
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
C:\>
again thanx.
i have full database bkp through rman. -
ALV codeing...plz help urgent
Hi Experts,
I am new to Abap.i hav a simple spec but i need to do it in ALV so plz help me.
Sales organization LIKP VKORG
Shipping point/receiving pt LIKP VSTEL
Delivery LIKP VBELN
Delivery date LIKP LFDAT
Delivery type LIKP LFART
Pland gds mvmnt date LIKP WADAT
Actual gds mvmet date LIKP WADAT_IST
Ship-to party LIKP KUNNR
Sold-to party LIKP KUNAG
Posting Status Customized fields ZCHK
If LIKP-WADAT = WADAT_IST, then print "OK", else " Posting Error"
this is a small requirment.plz help me in this it should be in ALV format.
correct answers will will given full points.
Thnaks & Regards
Sunita.
PLz Experts plz help me.Hi,
First get the a data into internal table first then fill the field catalog and give it to FM.
For futher reference <b>Goto to se80 and givepackage slis and see the programs in
slis.</b>type-pools: slis.
data:
i_fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat LIKE LINE OF i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MATNR'.----
> internal-table fieldaname
wa_fieldcat-tabname = 'I_MARA'.-------> Internal table name
wa_fieldcat-reptext_ddic = 'Material no.'.
wa_fieldcat-outputlen = '18'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERSDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Creation date'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERNAM'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Name of Person'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'LAEDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = ' Last Change'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM. " prepare_fieldcatalog
*& Form display_alv
text
--> p1 text
<-- p2 text
FORM display_alv .
Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = i_fieldcat----->fieldcat name
tables
t_outtab = i_mara.------> internal table
ENDFORM. " display_alv
<b> plzzzz reward points if it is useful.</b> -
Guys plz help meeee my iPhone4 is not turn on
guys please help me, my iPhone4 was turned on I went to see TV, after that I went and took my iphone. I clicked on the main button and saw that it didnt turn on, so I held up the above button (turn off and turn on button) but it didnt answer. now I did every thing that I could but it didnt turn on. so help me how can I turn it on again?
Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue.
Maybe you are looking for
-
I keep getting a pop up on Itunes when I try to add a file saying that ITUNES HAS STOPPED WORKING AN NEEDS TO CLOSE. W indows will notify me when corrected. iuninstalled and reinstalled 3 times to no avail. how do i fix?
-
I need to wipe my MacBook Air's hard drive - how can I do it?
Looking to sell and upgrade and want to be secure!
-
Urgent: Where are the keyframes in Premiere Pr CC?
I have cs6 on my older computer. yesterday we bought a new computer and downloaded all our programs from adobe. This morning I go to the older computer and edit a movie and send it to render and then move to the new computer to start work on a new pr
-
Hello, I have a question for anyone whom has gotten the XLIFF tranlation working. Per Oracle, they are stating that we need to install language packs for each language we want to use in translation. I was confused as to why, because XLIFF is just usi
-
Hi All, We are using the J2EE Engine of our XI box for connectivity to an external DB for BI UD Connect. We keep getting on an intermittent basis the following error message :- BIRuntimeException: Null is not a supported value for Connection Property