Gv_line and Bvbapkom are not mutually convertable.
Hi all,
data: gv_line(6000) type c.
Bvbapkom = gv_line.
But i am getting the Error like : gv_line and Bvbapkom are not mutually convertable.
Note: Bvbapkom is a Structure
How do i solve this ?
Mahesh
Hi ,
i got the solution
ANSWER:
Field-symbols: <X_Bvbapkom> type x,
<X_gv_line> type x.
Assign: Bvbapkom to <X_Bvbapkom> casting,
gv_line to <X_gv_line> casting.
<X_Bvbapkom> = <X_gv_line>.
Similar Messages
-
Unicode error:a line of internal table and a data object are not mutually c
Hi Friends,
This is the issue in upgradation from 4.6c to ECC6.0
I have an internal table itab which has include structure say 'xyz' . In xyz there is a field of type int4 as third field. I have a field as l_line which is a string.
data : begin of itab occurs 0.
include structure zxyz.
data: end of itab.
data: l_line type string.
In the program I am getting the unicode error as:
" A line of "itab" and "l_line" are not mutually convertible in unicode program." at he following line.
loop at itab into l_line.
endloop.
Thanks,
Ali.Hi Narendran,
I did the same earlier, but the field l_line is again used in the another line as follows
IF l_line CS w_group.----
(1)
where w_group LIKE zstr-cctr_group.
here zstr-cctr_group is same as one of the fields of structure xyz.
in line 1 it is giving warning as
l_line is incompatible and it must be C,N,D,T or string.
Thanks,
Ali -
Are not mutually convertible in a Unicode program
Hi guys,
I'm getting error: "LS_EDIDD-SDATA and LS_STRUCTURE are not mutually convertible in Unicode Program"
I have PRKST which is Amount field in LS_STRUCTURE, which causes this problem.
But if I change type of PRKST to CHAR15, then it doesn't give error.
But i want to use this field with type PRKST( CURR 11, decimal places 2).
Please help. Its urgent.
Thanks,
Mehul Lad
Moderator message - "Urgency" is not allowed in the forums. Read the RoE.
Message was edited by: Suhas SahaHi,
LCHR field is not a standalone field. It is always preceded by a field of type INT2 which has the length of the data stored in LCHR field.
So, in structure LS_EDIDD there should be a INT2 type field just before the field SDATA which tells the length of the actual value in SDATA. Suppose the field name is LEN.
So,
assign the value like this :
LS_STRUCTURE = LS_EDIDD-SDATA(LS_EDIDD-LEN).
Regards,
Ashish -
My Video and Audio are not syncing up after importing
I am trying to edit a few Ipad Clips in premier pro. My video and audio are not syncing. They are .mov lower resolution from the ipad. The original audio is fine - but after I put in a sequence the audio is off a few seconds (ahead). I did not add any affects or change anything. Please advise?
Thanks for any help in advance.
AllisonPremiere does not work well with variable frame rate video which, I expect, the ipad produces, You might have to convert the footage before you import it into Premiere. Do a forum search for variable frame rate, there are a lot of posts.
-
Field catalog & internal table are not mutually convertible
Hi friends,
please help me for this problem, actually i m trying to display three alv reports from the three buttond i have given on my first basic report. its working fine till first & getting the data into the internal table for the second also. but when coming to the field catalog for the second report its giving syntax error as my "field catalog and internal table are not mutually convertible'".i have tried by giving different fieldcatalog also but its giving the same problem.please help for this & try to give an example if u can. Thanks a lot.
Regards
PankajThis is my code :
TABLES: PLAF,
MARA,
MAKT,
AFPO,
T023T,
VSAUFK,
T006A,
MBEW,
ZCDR_D.
Type Pools for ALV *************************
TYPE-POOLS: SLIS,
ABAP.
KKBLO.
DATA DECLARATION. ****************************
DATA: FLAG TYPE I,
FLAG1 TYPE I,
FLAG2 TYPE I,
FLAG3 TYPE I,
FLAG4 TYPE I,
FLAG5 TYPE I.
********Declaration for field catalog
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV,
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_SORT TYPE SLIS_SORTINFO_ALV,
WA_SUBT LIKE SLIS_EV_SUBTOTAL_TEXT,
IT_EVENTS TYPE TABLE OF slis_alv_event WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
LAYOUT1 TYPE SLIS_LAYOUT_ALV,
IT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV,
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_SORT TYPE SLIS_SORTINFO_ALV,
WA_SUBT LIKE SLIS_EV_SUBTOTAL_TEXT,
IT_EVENTS TYPE TABLE OF slis_alv_event WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
WA_FIELDCAT1 TYPE SLIS_FIELDCAT_ALV,
LAYOUT2 TYPE SLIS_LAYOUT_ALV,
IT_FIELDCAT2 TYPE SLIS_T_FIELDCAT_ALV,
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_SORT TYPE SLIS_SORTINFO_ALV,
WA_SUBT LIKE SLIS_EV_SUBTOTAL_TEXT,
IT_EVENTS TYPE TABLE OF slis_alv_event WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
WA_FIELDCAT2 TYPE SLIS_FIELDCAT_ALV,
LAYOUT3 TYPE SLIS_LAYOUT_ALV,
IT_FIELDCAT3 TYPE SLIS_T_FIELDCAT_ALV,
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_SORT TYPE SLIS_SORTINFO_ALV,
WA_SUBT LIKE SLIS_EV_SUBTOTAL_TEXT,
IT_EVENTS TYPE TABLE OF slis_alv_event WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
WA_FIELDCAT3 TYPE SLIS_FIELDCAT_ALV.
TYPES DECLARATION. ****************************
TYPES: BEGIN OF TY_MARA,
MATNR LIKE MARA-MATNR, " Material Number
MATKL LIKE MARA-MATKL, " Material Group
END OF TY_MARA.
TYPES: BEGIN OF TY_PLAF,
PERTR LIKE PLAF-PERTR, " Date
PLNUM LIKE PLAF-PLNUM, " Planned Order Number
MATNR LIKE PLAF-MATNR, " Material number
PLWRK LIKE PLAF-PLWRK, " Plant
KDAUF LIKE PLAF-KDAUF, " Sales Order Number
KDPOS LIKE PLAF-KDPOS, " SO Line Item
END OF TY_PLAF.
TYPES: BEGIN OF TY_MAKT,
MATNR LIKE PLAF-MATNR, " Material Number
MAKTX LIKE MAKT-MAKTX, " Material Description
END OF TY_MAKT.
TYPES: BEGIN OF TY_AFPO,
PLNUM LIKE AFPO-PLNUM, " Planned Order Number
MATNR LIKE AFPO-MATNR, " Material Number
KDAUF LIKE AFPO-KDAUF, " Sales Order Number
KDPOS LIKE AFPO-KDPOS, " SO Line Item
AUFNR LIKE AFPO-AUFNR, " Production Order
STRMP LIKE AFPO-STRMP,
DWERK LIKE AFPO-DWERK,
END OF TY_AFPO.
TYPES: BEGIN OF TY_ZCDR_D,
MANDT LIKE ZCDR_D-MANDT, " Client
CBNO LIKE ZCDR_D-CBNO, " Customs Book Number
PLNUM LIKE ZCDR_D-PLNUM, " Planned Order Number
MATNR LIKE ZCDR_D-MATNR, " Material Number
MAKTX LIKE ZCDR_D-MAKTX, " Material Description
KDAUF like ZCDR_D-KDAUF, " Sales Order Number
KDPOS like ZCDR_D-KDPOS, " SO Line Item
AUFNR LIKE ZCDR_D-AUFNR, " Production Order
END OF TY_ZCDR_D.
TYPES: BEGIN OF TY_VSAUFK,
INACT LIKE VSAUFK-INACT, " Status Indicator
END OF TY_VSAUFK.
TYPES: BEGIN OF TY_PLAF_MAKT,
CBNO LIKE ZCDR_D-CBNO, " Customs Book Number
PLNUM LIKE PLAF-PLNUM, " Planned Order Number
CHK TYPE C, " Check Box
MATNR LIKE PLAF-MATNR, " Material Number
MAKTX LIKE MAKT-MAKTX, " Material Description
KDAUF LIKE PLAF-KDAUF, " Sales Order Number
KDPOS LIKE PLAF-KDPOS, " SO Line Item
AUFNR LIKE AFPO-AUFNR, " Production Order
END OF TY_PLAF_MAKT.
TYPES: BEGIN OF TY_HELP_ITEM,
CBNO TYPE ZCDR_D-CBNO, " Customs Book Number
PLNUM LIKE ZCDR_D-PLNUM, " Planned Order Number
MATNR LIKE ZCDR_D-MATNR, " Material Number
MAKTX LIKE ZCDR_D-MAKTX, " Material Description
KDAUF LIKE ZCDR_D-KDAUF, " Sales Order Number
KDPOS LIKE ZCDR_D-KDPOS, " SO Line Item
AUFNR LIKE ZCDR_D-AUFNR, " Production Order
END OF TY_HELP_ITEM.
WORK AREA ******************************
DATA: WA_MARA TYPE TY_MARA,
WA_PLAF TYPE TY_PLAF,
WA_MAKT TYPE TY_MAKT,
WA_AFPO TYPE TY_AFPO,
WA_ZCDR_D TYPE TY_ZCDR_D,
WA_VSAUFK TYPE TY_VSAUFK,
WA_PLAF_MAKT TYPE TY_PLAF_MAKT,
WA_HELP_ITEM TYPE TY_HELP_ITEM.
INTERNAL TABLES ****************************
DATA: IT_MARA TYPE TABLE OF TY_MARA,
IT_PLAF TYPE TABLE OF TY_PLAF,
IT_MAKT TYPE TABLE OF TY_MAKT,
IT_AFPO TYPE TABLE OF TY_AFPO,
IT_ZCDR_D TYPE TABLE OF TY_ZCDR_D,
IT_VSAUFK TYPE TABLE OF TY_VSAUFK,
IT_PLAF_MAKT TYPE TABLE OF TY_PLAF_MAKT,
IT_HELP_ITEM TYPE TABLE OF TY_HELP_ITEM.
*it_events TYPE TABLE OF slis_alv_event WITH NON-UNIQUE DEFAULT KEY
*WITH HEADER LINE INITIAL SIZE 0.
TYPES: BEGIN OF TY_BOM,
MATMK LIKE STPOX-MATMK,
MTNRV LIKE ZCDR_D-MATNR,
IDNRK LIKE STPOX-IDNRK,
MNGLG LIKE STPOX-MNGLG,
MMEIN LIKE STPOX-MMEIN,
VPRSV LIKE STPOX-VPRSV,
UPRICE LIKE MBEW-STPRS,
TPRICE LIKE MBEW-STPRS,
END OF TY_BOM,
BEGIN OF TY_QUAN,
MATMK LIKE STPOX-MATMK,
MTNRV LIKE ZCDR_D-MATNR,
IDNRK LIKE STPOX-IDNRK,
MNGLG LIKE STPOX-MNGLG,
MMEIN LIKE STPOX-MMEIN,
UPRICE LIKE MBEW-STPRS,
TPRICE LIKE MBEW-STPRS,
END OF TY_QUAN,
BEGIN OF TY_T023T,
MATKL LIKE T023T-MATKL,
WGBEZ LIKE T023T-WGBEZ,
END OF TY_T023T,
BEGIN OF TY_T006A,
MMEIN LIKE T006A-MSEHI,
MSEHT LIKE T006A-MSEHT,
END OF TY_T006A,
BEGIN OF TY_IMP_FINAL,
SNO TYPE SY-INDEX,
HSCODE LIKE ZHSCODE-HSCODE,
WGBEZ TYPE T023T-WGBEZ,
SPEC(20) TYPE C,
MNGLG LIKE STPOX-MNGLG,
MSEHT LIKE T006A-MSEHT,
CNTRY(13) TYPE C,
UPRICE TYPE P LENGTH 16 DECIMALS 2,
TPRICE TYPE P LENGTH 16 DECIMALS 2,
CURRCODE TYPE C LENGTH 5,
END OF TY_IMP_FINAL,
BEGIN OF TY_MBEW,
MATNR LIKE MBEW-MATNR,
VPRSV LIKE MBEW-VPRSV,
STPRS LIKE MBEW-STPRS,
VERPR LIKE MBEW-VERPR,
END OF TY_MBEW.
DATA: WA_BOM TYPE TY_BOM,
WA_QUAN TYPE TY_QUAN,
WA_IMP_FINAL TYPE TY_IMP_FINAL,
WA_T023T TYPE TY_T023T,
WA_T006A TYPE TY_T006A,
WA_MBEW TYPE TY_MBEW.
DATA: IT_BOM TYPE TABLE OF TY_BOM,
IT_QUAN TYPE TABLE OF TY_QUAN,
IT_IMP_FINAL TYPE TABLE OF TY_IMP_FINAL,
IT_MBEW TYPE TABLE OF TY_MBEW.
SELECTION-SCREEN **************************
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE TEXT-001.
PARAMETERS : PR_CBNO LIKE ZCDR_D-CBNO OBLIGATORY. "Customs Book number
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION **************************
INITIALIZATION.
**PERFORM CLEAR_DATA.
**CLEAR: wa_layout.
*PERFORM set_events USING it_events[].
SELECT OPTION ****************************************
SELECTION-SCREEN : BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-002.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS:
SO_PERTR for PLAF-PERTR, "----
Date
SO_MATNR for MARA-MATNR, "----
Material
SO_MATKL for MARA-MATKL, "----
Material Group
SO_PLWRK for PLAF-PLWRK OBLIGATORY, "----
Plant
SO_KDAUF for PLAF-KDAUF. "----
Sales Order
SELECTION-SCREEN : END OF BLOCK BLK.
SELECTION SCREEN F4 HELP *********************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR PR_CBNO.
DATA: DYNFIELDS TYPE TABLE OF DYNPREAD WITH HEADER LINE.
DYNFIELDS-FIELDNAME = PR_CBNO.
APPEND DYNFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = SY-CPROG
DYNUMB = SY-DYNNR
TRANSLATE_TO_UPPER = 'X'
REQUEST = ' '
PERFORM_CONVERSION_EXITS = ' '
PERFORM_INPUT_CONVERSION = ' '
DETERMINE_LOOP_INDEX = ' '
START_SEARCH_IN_CURRENT_SCREEN = ' '
START_SEARCH_IN_MAIN_SCREEN = ' '
START_SEARCH_IN_STACKED_SCREEN = ' '
START_SEARCH_ON_SCR_STACKPOS = ' '
SEARCH_OWN_SUBSCREENS_FIRST = ' '
SEARCHPATH_OF_SUBSCREEN_AREAS = ' '
TABLES
DYNPFIELDS = DYNFIELDS
EXCEPTIONS
INVALID_ABAPWORKAREA = 1
INVALID_DYNPROFIELD = 2
INVALID_DYNPRONAME = 3
INVALID_DYNPRONUMMER = 4
INVALID_REQUEST = 5
NO_FIELDDESCRIPTION = 6
INVALID_PARAMETER = 7
UNDEFIND_ERROR = 8
DOUBLE_CONVERSION = 9
STEPL_NOT_FOUND = 10
OTHERS = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE DYNFIELDS WITH KEY FIELDNAME = 'CBNO'.
PR_CBNO = DYNFIELDS-FIELDVALUE.
SELECT
CBNO
PLNUM
MATNR
MAKTX
KDAUF
KDPOS
AUFNR
FROM ZCDR_D
INTO TABLE IT_HELP_ITEM .
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'CBNO'
PVALKEY = ' '
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNNR
DYNPROFIELD = 'PR_CBNO'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
VALUE_TAB = IT_HELP_ITEM
FIELD_TAB =
RETURN_TAB =
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
***********************SELECTION SCREEN VALIDATION.*******************
AT SELECTION-SCREEN ON PR_CBNO.
SELECT SINGLE *
FROM ZCDR_D
WHERE CBNO = PR_CBNO.
IF SY-SUBRC EQ 0.
MESSAGE E000(ZCBR) WITH PR_CBNO.
ENDIF.
AT SELECTION-SCREEN ON SO_PERTR.
IF SO_PERTR IS NOT INITIAL.
SELECT SINGLE *
FROM PLAF
WHERE PERTR IN SO_PERTR.
IF SY-SUBRC NE 0.
MESSAGE W001(ZCBR) WITH SO_PERTR-LOW.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON SO_MATNR.
IF SO_MATNR IS NOT INITIAL.
SELECT SINGLE *
FROM MARA
WHERE MATNR IN SO_MATNR.
IF SY-SUBRC NE 0.
MESSAGE W002(ZCBR) WITH SO_MATNR-LOW.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON SO_MATKL.
IF SO_MATKL IS NOT INITIAL.
SELECT SINGLE *
FROM MARA
WHERE MATKL IN SO_MATKL.
IF SY-SUBRC NE 0.
MESSAGE W003(ZCBR) WITH SO_MATKL-LOW.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON SO_PLWRK.
IF SO_PLWRK IS NOT INITIAL.
SELECT SINGLE * FROM PLAF
WHERE PLWRK IN SO_PLWRK.
IF SY-SUBRC NE 0.
MESSAGE W004(ZCBR) WITH SO_PLWRK-LOW.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON SO_KDAUF.
IF SO_KDAUF IS NOT INITIAL.
SELECT SINGLE * FROM PLAF
WHERE KDAUF IN SO_KDAUF.
IF SY-SUBRC NE 0.
MESSAGE W005(ZCBR) WITH SO_KDAUF-LOW.
ENDIF.
ENDIF.
*********************START-OF-SELECTION.*****************************
START-OF-SELECTION.
IF so_pertr IS NOT INITIAL.
FLAG = 1.
ENDIF.
IF SO_MATNR IS NOT INITIAL.
FLAG1 = 1.
ENDIF.
IF so_matkl IS NOT INITIAL.
FLAG2 = 1.
ENDIF.
IF so_plwrk IS NOT INITIAL.
FLAG3 = 1.
ENDIF.
IF so_kdauf IS NOT INITIAL.
FLAG4 = 1.
ENDIF.
Select data into its internal table from different database tables
SELECT
MATNR
MATKL
MTART
INTO CORRESPONDING FIELDS OF TABLE IT_MARA
FROM MARA
WHERE MTART = 'ZFGS'.
IF FLAG2 NE 0.
DELETE IT_MARA WHERE
NOT ( MATKL IN SO_MATKL )
ENDIF.
IF FLAG1 NE 0.
DELETE IT_MARA WHERE
NOT ( MATNR IN SO_MATNR )
ENDIF.
SELECT
PERTR
PLNUM
MATNR
PLWRK
KDAUF
KDPOS
FROM PLAF
INTO CORRESPONDING FIELDS OF TABLE IT_PLAF
FOR ALL ENTRIES IN IT_MARA
WHERE PLWRK IN SO_PLWRK
AND MATNR = IT_MARA-MATNR.
SELECT
MATNR
PLNUM
AUFNR
KDAUF
KDPOS
STRMP
DWERK
INACT
FROM AFPO
INTO CORRESPONDING FIELDS OF TABLE IT_AFPO
FOR ALL ENTRIES IN IT_MARA
WHERE DWERK IN SO_PLWRK
AND MATNR = IT_MARA-MATNR.
WHERE MATNR = IT_MARA-MATNR
AND STRMP = IT_PLAF-PERTR
AND KDAUF = IT_PLAF-KDAUF
AND DWERK = IT_PLAF-PLWRK.
End of Data selection
Keep only those records which the user wants from his selection screen
IF FLAG NE 0.
DELETE IT_PLAF WHERE
NOT ( PERTR IN SO_PERTR )
DELETE IT_AFPO WHERE
NOT ( STRMP IN SO_PERTR )
ENDIF.
IF FLAG3 NE 0.
DELETE IT_PLAF WHERE
NOT ( PLWRK IN SO_PLWRK )
DELETE IT_AFPO WHERE
NOT ( DWERK IN SO_PLWRK )
ENDIF.
IF FLAG4 NE 0.
DELETE IT_PLAF WHERE
NOT ( KDAUF IN SO_KDAUF )
DELETE IT_AFPO WHERE
NOT ( KDAUF IN SO_KDAUF )
ENDIF.
SELECT
MATNR
MAKTX
FROM MAKT
INTO CORRESPONDING FIELDS OF TABLE IT_MAKT
FOR ALL ENTRIES IN IT_PLAF
WHERE MATNR = IT_PLAF-MATNR
AND SPRAS = 'EN'.
SELECT
FROM ZCDR_D
INTO TABLE IT_ZCDR_D.
Put data into final internal table from different internal tables
LOOP AT IT_MARA INTO WA_MARA.
LOOP AT IT_PLAF INTO WA_PLAF WHERE MATNR = WA_MARA-MATNR.
READ TABLE IT_ZCDR_D
INTO WA_ZCDR_D
WITH KEY PLNUM = WA_PLAF-PLNUM.
IF SY-SUBRC <> 0.
MOVE WA_PLAF-PLNUM TO WA_PLAF_MAKT-PLNUM.
MOVE WA_PLAF-MATNR TO WA_PLAF_MAKT-MATNR.
MOVE WA_PLAF-KDAUF TO WA_PLAF_MAKT-KDAUF.
MOVE WA_PLAF-KDPOS TO WA_PLAF_MAKT-KDPOS.
READ TABLE IT_AFPO INTO WA_AFPO WITH KEY PLNUM = WA_PLAF-PLNUM.
MOVE WA_AFPO-AUFNR TO WA_PLAF_MAKT-AUFNR.
SELECT
SINGLE * FROM VSAUFK
INTO TABLE IT_VSAUFK
WHERE AUFNR = WA_AFPO-AUFNR
AND STAT = 'I0012'.
IF SY-SUBRC <> 0.
MOVE WA_AFPO-AUFNR TO IT_PLAF_MAKT-AUFNR.
ELSE.
CHECK IT_VSAUFK-INACT = 'X'.
MOVE WA_AFPO-AUFNR TO IT_PLAF_MAKT-AUFNR.
ENDIF.
ENDLOOP.
READ TABLE IT_MAKT
INTO WA_MAKT
WITH KEY MATNR = WA_MARA-MATNR.
MOVE WA_MAKT-MAKTX TO WA_PLAF_MAKT-MAKTX.
APPEND WA_PLAF_MAKT TO IT_PLAF_MAKT.
CLEAR WA_PLAF_MAKT.
ENDIF.
ENDLOOP.
ENDLOOP.
LOOP AT IT_PLAF_MAKT .
LOOP AT IT_MARA INTO WA_MARA.
LOOP AT IT_PLAF INTO WA_PLAF WHERE MATNR = WA_MARA-MATNR.
LOOP AT IT_AFPO INTO WA_AFPO WHERE MATNR = WA_MARA-MATNR.
READ TABLE IT_ZCDR_D
INTO WA_ZCDR_D
WITH KEY PLNUM = WA_AFPO-PLNUM.
IF SY-SUBRC <> 0.
LOOP AT IT_AFPO INTO WA_AFPO.
WHERE MATNR IN SO_MATNR
AND STRMP = SO_PERTR
AND PLNUM IN SO_PLNUM
AND KDAUF IN SO_-KDAUF
AND MATKL IN SO_MATKL.
SELECT
SINGLE INACT FROM VSAUFK
INTO WA_VSAUFK
WHERE AUFNR = WA_AFPO-AUFNR
AND STAT = 'I0012'.
IF SY-SUBRC <> 0.
WA_PLAF_MAKT-PLNUM = WA_AFPO-PLNUM.
WA_PLAF_MAKT-KDAUF = WA_AFPO-KDAUF.
WA_PLAF_MAKT-KDPOS = WA_AFPO-KDPOS.
WA_PLAF_MAKT-MATNR = WA_AFPO-MATNR.
WA_PLAF_MAKT-AUFNR = WA_AFPO-AUFNR.
READ TABLE IT_MAKT INTO WA_MAKT WITH KEY MATNR = WA_AFPO-MATNR.
WA_PLAF_MAKT-MAKTX = WA_MAKT-MAKTX.
APPEND WA_PLAF_MAKT TO IT_PLAF_MAKT .
APPEND WA_AFPO TO IT_PLAF_MAKT.
MOVE WA_AFPO-AUFNR TO IT_PLAF_MAKT-AUFNR.
ELSE.
CHECK WA_VSAUFK-INACT = 'X'.
WA_PLAF_MAKT-PLNUM = WA_AFPO-PLNUM.
WA_PLAF_MAKT-KDAUF = WA_AFPO-KDAUF.
WA_PLAF_MAKT-KDPOS = WA_AFPO-KDPOS.
WA_PLAF_MAKT-MATNR = WA_AFPO-MATNR.
WA_PLAF_MAKT-AUFNR = WA_AFPO-AUFNR.
READ TABLE IT_MAKT INTO WA_MAKT WITH KEY MATNR = WA_AFPO-MATNR.
WA_PLAF_MAKT-MAKTX = WA_MAKT-MAKTX.
APPEND WA_PLAF_MAKT TO IT_PLAF_MAKT .
APPEND WA_AFPO TO IT_PLAF_MAKT.
MOVE WA_AFPO-AUFNR TO IT_PLAF_MAKT-AUFNR.
ENDIF.
ENDIF.
ENDLOOP.
EXIT.
ENDIF.
ENDLOOP.
ENDLOOP.
LOOP AT IT_PLAF_MAKT INTO WA_PLAF_MAKT.
WA_PLAF_MAKT-CBNO = PR_CBNO.
MODIFY IT_PLAF_MAKT FROM WA_PLAF_MAKT TRANSPORTING CBNO.
ENDLOOP.
ENDLOOP.
PERFORM CHANGE_CATALOG.
PERFORM ALV_DISPLAY.
*& Form CHANGE_CATALOG
text
FORM CHANGE_CATALOG.
LAYOUT-ZEBRA = 'X'.
DATA: L_POS TYPE I.
L_POS = L_POS + 1.
WA_FIELDCAT-col_pos = L_POS.
WA_FIELDCAT-SELTEXT_M = 'Planned Order Nos.'.
WA_FIELDCAT-TABNAME = WA_PLAF_MAKT.
WA_FIELDCAT-FIELDNAME = 'PLNUM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
L_POS = L_POS + 1.
WA_FIELDCAT-COL_POS = L_POS.
WA_FIELDCAT-INPUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'Check Box'.
WA_FIELDCAT-TABNAME = WA_PLAF_MAKT.
WA_FIELDCAT-CHECKBOX = 'X'.
WA_FIELDCAT-EDIT = abap_true.
WA_FIELDCAT-FIELDNAME = 'CHK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
L_POS = L_POS + 1.
WA_FIELDCAT-COL_POS = L_POS.
WA_FIELDCAT-OUTPUTLEN = '12'.
WA_FIELDCAT-SELTEXT_M = 'Material'.
WA_FIELDCAT-TABNAME = WA_PLAF_MAKT.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
L_POS = L_POS + 1.
WA_FIELDCAT-COL_POS = L_POS.
WA_FIELDCAT-OUTPUTLEN = '35'.
WA_FIELDCAT-SELTEXT_M = 'Material Description'.
WA_FIELDCAT-TABNAME = WA_PLAF_MAKT.
WA_FIELDCAT-FIELDNAME = 'MAKTX'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
L_POS = L_POS + 1.
WA_FIELDCAT-COL_POS = L_POS.
WA_FIELDCAT-SELTEXT_M = 'Sales Order Number'.
WA_FIELDCAT-TABNAME = WA_PLAF_MAKT.
WA_FIELDCAT-FIELDNAME = 'KDAUF'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
L_POS = L_POS + 1.
WA_FIELDCAT-COL_POS = L_POS.
WA_FIELDCAT-SELTEXT_M = 'S O Line Item'.
WA_FIELDCAT-TABNAME = WA_PLAF_MAKT.
WA_FIELDCAT-FIELDNAME = 'KDPOS'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
L_POS = L_POS + 1.
WA_FIELDCAT-COL_POS = L_POS.
WA_FIELDCAT-OUTPUTLEN = '13'.
WA_FIELDCAT-SELTEXT_M = 'Production Order'.
WA_FIELDCAT-TABNAME = WA_PLAF_MAKT.
WA_FIELDCAT-FIELDNAME = 'AUFNR'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
*GS_LAYOUT-TOTALS_BEFORE_ITEMS = 'X'.
*data : text like slis_ev_subtotal_text value 'total'.
*gs_layout-subtotals_text = text.
*gs_layout-totals_only = 'X'.
gs_layout-subtotals_text = 'total'.
endform. " CHANGE_CATALOG
*********************event*************************************
*& Form ALV_DISPLAY
text
FORM ALV_DISPLAY.
*data: LC_GLAY TYPE LVC_S_GLAY.
LC_GLAY-EDT_CLL_CB = 'X'.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE = 'PLANNED ORDERS'
I_GRID_SETTINGS = LC_GLAY
IS_LAYOUT = LAYOUT
IT_FIELDCAT = IT_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = 'X'
IS_VARIANT =
IT_EVENTS = IT_EVENTS[]
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_IT_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_PLAF_MAKT
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH IT_FIELDCAT[].
ENDFORM. "ALV_DISPLAY
*& Form USER_COMMAND
text
-->UCOMM text
-->SELFIELD text
FORM USER_COMMAND
USING UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
Data: REF1 TYPE REF TO CL_GUI_ALV_GRID.
DATA WA LIKE LINE OF IT_PLAF_MAKT.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = REF1.
CALL METHOD REF1->CHECK_CHANGED_DATA.
CASE UCOMM.
WHEN '&BACK'.
LEAVE TO SCREEN 0.
WHEN '&EXIT'.
LEAVE TO SCREEN 0.
WHEN '&CANC'.
LEAVE TO SCREEN 0.
WHEN '&SAVE'.
CLEAR IT_ZCDR_D[].
LOOP AT IT_PLAF_MAKT INTO WA_PLAF_MAKT WHERE CHK = 'X'.
CLEAR WA_ZCDR_D.
WA_ZCDR_D-MANDT = SY-MANDT.
WA_ZCDR_D-CBNO = WA_PLAF_MAKT-CBNO.
WA_ZCDR_D-plnum = WA_PLAF_MAKT-PLNUM.
WA_ZCDR_D-MATNR = WA_PLAF_MAKT-MATNR.
WA_ZCDR_D-MAKTX = WA_PLAF_MAKT-MAKTX.
WA_ZCDR_D-KDAUF = WA_PLAF_MAKT-KDAUF.
WA_ZCDR_D-KDPOS = WA_PLAF_MAKT-KDPOS.
WA_ZCDR_D-AUFNR = WA_PLAF_MAKT-AUFNR.
APPEND WA_ZCDR_D to IT_ZCDR_D.
ENDLOOP.
LOOP AT IT_ZCDR_D INTO WA_ZCDR_D.
INSERT ZCDR_D FROM WA_ZCDR_D.
CLEAR WA_ZCDR_D.
ENDLOOP.
IF SY-SUBRC EQ 0.
MESSAGE S021(ZCBR) WITH PR_CBNO.
ENDIF.
IF IT_ZCDR_D IS INITIAL.
MESSAGE 'Select Atleast one Check Box' TYPE 'E' .
ENDIF.
WHEN 'IMPORT_INF'.
PERFORM IMPORT_REPORT.
WHEN 'EXPORT_INF'.
PERFORM EXPORT_REPORT.
WHEN 'UNIT_CONSU'.
PERFORM UNIT_CONSUMPTION.
ENDCASE.
ENDFORM. "USER_COMMAND
FORM set_events USING it_events TYPE slis_t_event.
DATA: x_event TYPE slis_alv_event.
clear x_event.
x_event-name = 'USER_COMMAND'.
x_event-form = 'USER_COMMAND'.
append x_event to it_events.
CLEAR x_event.
call function 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = IT_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
read table it_events into x_event with key name = slis_ev_user_command.
if sy-subrc = 0.
x_event-form = 'USER_COMMAND'.
modify it_events from x_event index sy-tabix transporting form .
endif.
ENDFORM.
*& Form set_pf_status
text
-->RT_EXTAB text
FORM SET_PF_STATUS USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'Z_PFSTAT'.
ENDFORM. " set_pf_status
FORM IMPORT_REPORT.
TYPES: BEGIN OF TY_BOM,
MATMK LIKE STPOX-MATMK,
MTNRV LIKE ZCDR_D-MATNR,
IDNRK LIKE STPOX-IDNRK,
MNGLG LIKE STPOX-MNGLG,
MMEIN LIKE STPOX-MMEIN,
VPRSV LIKE STPOX-VPRSV,
UPRICE LIKE MBEW-STPRS,
TPRICE LIKE MBEW-STPRS,
END OF TY_BOM,
BEGIN OF TY_QUAN,
MATMK LIKE STPOX-MATMK,
MTNRV LIKE ZCDR_D-MATNR,
IDNRK LIKE STPOX-IDNRK,
MNGLG LIKE STPOX-MNGLG,
MMEIN LIKE STPOX-MMEIN,
UPRICE LIKE MBEW-STPRS,
TPRICE LIKE MBEW-STPRS,
END OF TY_QUAN,
BEGIN OF TY_T023T,
MATKL LIKE T023T-MATKL,
WGBEZ LIKE T023T-WGBEZ,
END OF TY_T023T,
BEGIN OF TY_T006A,
MMEIN LIKE T006A-MSEHI,
MSEHT LIKE T006A-MSEHT,
END OF TY_T006A,
BEGIN OF TY_IMP_FINAL,
SNO TYPE SY-INDEX,
HSCODE LIKE ZHSCODE-HSCODE,
WGBEZ TYPE T023T-WGBEZ,
SPEC(20) TYPE C,
MNGLG LIKE STPOX-MNGLG,
MSEHT LIKE T006A-MSEHT,
CNTRY(13) TYPE C,
UPRICE TYPE P LENGTH 16 DECIMALS 2,
TPRICE TYPE P LENGTH 16 DECIMALS 2,
CURRCODE TYPE C LENGTH 5,
END OF TY_IMP_FINAL,
BEGIN OF TY_MBEW,
MATNR LIKE MBEW-MATNR,
VPRSV LIKE MBEW-VPRSV,
STPRS LIKE MBEW-STPRS,
VERPR LIKE MBEW-VERPR,
END OF TY_MBEW.
DATA: WA_BOM TYPE TY_BOM,
WA_QUAN TYPE TY_QUAN,
WA_IMP_FINAL TYPE TY_IMP_FINAL,
WA_T023T TYPE TY_T023T,
WA_T006A TYPE TY_T006A,
WA_MBEW TYPE TY_MBEW.
DATA: IT_BOM TYPE TABLE OF TY_BOM,
IT_QUAN TYPE TABLE OF TY_QUAN,
IT_IMP_FINAL TYPE TABLE OF TY_IMP_FINAL,
IT_MBEW TYPE TABLE OF TY_MBEW.
DATA: IT_STPO TYPE STANDARD TABLE OF STPOX,
WA_STPO TYPE STPOX.
SELECT
MATNR
VPRSV
STPRS
VERPR
FROM MBEW
INTO CORRESPONDING FIELDS OF TABLE IT_MBEW.
WHERE MATNR EQ IT_MARA-MATNR. "MBEW
*I_STPO2 TYPE STANDARD TABLE OF STPOX.
LOOP AT IT_PLAF_MAKT INTO WA_PLAF_MAKT WHERE CHK = 'X'.
LOOP AT IT_ZCDR_D INTO WA_ZCDR_D .
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2' -
Keyboard and trackpad are not working, Keyboard and trackpad are not working
I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own". -
All of my music is gone. I have no idea how to get it back and Im worried because it isnt showing up on available downloads.
Isn't iTunes 10.5 r 9 a beta release for developers? If that's the case then isn't there a special web site for developers to discuss issues (and they are not supposed to discuss them on the public forum)? If you're not a developer and have this through unofficial channels then I'm not sure you can expect full functionality.
-
Please help! Illustrator CS6 started trying to open all of my complex.ai files with a "Text Import Options" box as if they were text files, and they are not opening! Help!
Hi Monika,
I have spent the last two or three days trying to do what you suggested. I uninstalled Adobe 6 from Windows. Some files that CS6 placed on my system during installation remained, including fonts and .dll files.
I had to abandon the Cleaner Tool you suggested because in one screen it allowed me to specify removing CS6 only, but on the following screen it only gave on option to remove ALL Adobe programs. I could not do that because I didn't have the serial number handy for CS3 in case I want to reinstall it at some point.
I tried to get technical help with the Cleaner Tool problem but no definitive help was available, so I reinstalled CS6 again without having the benefit of the Cleaner Tool. I tried to get the serial number for CS3 so I could use the Cleaner Tool but spent 2 wasted hours in chat. Even though I had a customer number, order number, order date, place of purchase, the email address used AND 16 digits of the serial number, in two hours the agent couldn't give me the serial number. After two hours I had nothing but instructions to wait another 20 minutes for a case number.
Illustrator CS6 is still trying to open some backups as Text and otherNone of the problems have been fixed. I have tried to open/use the .ai files in CS6 installed on another system and am getting the same result, so I don't think the software was damaged by the cleaner. The hard drive cleaner is well-known and I've run it many times without any problem to previous versions of Illustrator or any other programs.
When I ordered, the sale rep promised good technical support and gave me an 800 number, but after I paid the $2000, I learned that the 800 number she gave me doesn't support CS6 and hangs up on me. Adobe doesn't call it a current product even though they just sold it to me about 3 weeks ago.
Would appreciate any help you experts can offer. If I can't solve this, the last backup I can use was from June and I will have lost HUNDREDS of hours of work and assets that I cannot replace.
Exhausted and still desperately in need of help... -
Aperture ate my picture files and they are not recoverable. The guy at the Genius Bar told me to Trash the App, empty Trash, then go to Purchases and reinstall. But Purchases says it is "Installed" so it does not let me download it again. HELP!!!!
I typed Aperture into Spotlight and sure enough it did show up.
It looks like it is supposed to be in Apps.
But it is not there.
So I clicked on the spotlight Aperture and it opened up the App!!!!
But I do not know where it is to move it!
How can I find it?
While Aperture is running and you are seeing it in the Dock, ctrl-click (or right click) the Dock icon.
You will see a contextual menu. Click on "Options", then select "Show in Finder".
And check the "keep in Dock" mark, so you will not lose it from the Dock. -
I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?
DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.
-
On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?
What version of Mac OS X?
What home page?
What browser? -
When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?
Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's -
One day, my ipad and iphone pick up my emails (.mac account) from icloud just fine. the next day, I recieved error messages that say my user name and password are not accurate. I removed the icloud program on both devices and added it back on to both devices and get the same message. I logged into icloud from my Mac and while I can log in, it times out when I select email and wont load the email there either. Any Suggestons?
I am having the same problem; it started about 24-36 hours ago.
I know my ID/PW combo are correct because I can access all other aspects of iCloud except mail.
iPhone -- returns incorrect ID / Password
iPad -- Same
Mail.app on Mac -- returns incorrect password error
icloud.com -- allows me to log in and use all functions accept mail. When I try to use mail it stays on a white screen for about 60 seconds then returns a dialogue box that indicates a server error.
I contacted Apple and they placed my iCloud account into something called "Troubleshooting" mode. They generated a new strong password and sent it on to "Engineering."
I suspect there are a small number ofo users like you who are affected with the same problem I am. Too small a number for it to be reported as an outtage. I suggest you call Apple and open a case to have your mail investigaged.
Hope this helps... -
turned off my desktop mac, now both my mouse and keyboard are not connected. i am not logged in yet as well, dont know what to do ?
Try resetting the SMC (no peripherals required).
Barry -
I have two ipods in my house that were set up under the same email. I have since assigned two different emails. How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not happy?
By "game center account", do you mean Apple ID?
If so, you can change it.
1. Tap settings and navigate to iTunes and App Stores
2. Tap "Apple ID" and then tap "Sign Out"
3. Log in with a different ID.
Maybe you are looking for
-
Uninstall InDesign CS6 when uninstaller does not work
trying to uninstall CS6 applications through their "uninstall applications" but i get an error message and it won't let me uninstall. Can i just try to drag files to trash. Not ideal but this is ridiculous
-
I am new at this so some of my terminology may be off. I have a server, when I turned it on tonight I had a white screen with the little thing in the center going around. Before it could do anything the computer just quite. Went black. I tried 5
-
Relevance of Recv. Deter. step in BPM
Hi All, I am a bit confused about the RD step in BPM. I tried a scenario where in i split a message into two (say msg A and msg B)and sent it to two different systems (msg A to sys A and msg B to sys B). In my BPM in a fork, before the sent steps i s
-
Hi, I have got an infocube(IC) and multicube based on IC (MC). The authorization object for IC and MC are A & B. A report on MC has got B as authorization object. Now does the object 'A' has got any impact on report. As on now its saying that indequa
-
Automatic freight charges put in the stock transport order (me21n)
hi kindly define process automatic freight condition charges in PO