GW 2014 and Novell Client

Hi,
since we upgraded to GroupWise 2014 SP1 HP1 some (but not all) of our users
(still GW 2012 Clients) complain that they have to authenticate twice,
Novell Client and GroupWise.. is there a change because of the decoupling of
GW and eDirectory? Something to be aware of? I did not find anything in the
docu...
Thanks,
Mirko

Massimo Rosen wrote:
> Mirko,
>
> Am 09.04.2015 um 13:44 schrieb Mirko Guldner:
>>
>> I verified this...
>>
>> We have "Use eDirectory Authentication instead of password" set and
>> locked on the domain level.
>
> Well, that explains then why the option isn't there in the client.
Ah, ok, I see that now. Then possibly it was the other options that my
collegues sometimes saw - I think I didn't ask precisely...
> Which basically leaves the idea that somehow the association between GW
> and eDir user got lost/broken.
What is the best way to check this? If "Sychronize" in Admin Console updates
"Contact information" correctly the association should be all right,
shouldn't it? Additionaly I check LDAP DN in "Diagnostics". I did not see
any problems there.
I seems that only users with clients before 12.0.3 HP1 are affected; as soon
as users upgrade to 12.0.3 HP1 or 14.0.1 HP1 login works as before.
Thanks,
Mirko

Similar Messages

Login intermittently slow with ZCM agent AND Novell client

We continue to struggle with intermittently slow logins in our environment. In testing, we noticed that logins are very fast (10-20 seconds) when only the Novell Client is installed, and very fast (~10 seconds) when only the ZCM agent is installed. However, when they are both installed, logins slow down, sometimes to 1.5 minutes or longer.
We have checked DNS and rDNS, and they are both configured properly. SLP is working properly as demonstrated by the fast logins when only the client is installed. We use LDAP for user lookup, and it also works very fast to resolve user names (~ 1 second).
We are using ZCM 10.3.1, and the client is fully patched as well (both Novell Client 2 and 4.91)
Are there any specific settings (for the ZCM agent or the client itself) that might address this issue?

My apologies, I told you to remove the wrong thing.
I should have said NMAS instead of CASA.
I am just so used to saying CASA when talking about ZCM.
In regards to NMAS, you could simply rename "NWSSO.DLL" as a test.
If NMAS is installed which is tested by the existence of this DLL, then
a certain NMAS call is always made, which in some cases can take a long
time.
On 11/9/2010 12:06 PM, dshofkom33 wrote:
>
> craig_wilson;2042688 Wrote:
>> Try removing CASA from the device and see if that makes a difference.
>> A TID will be out on the issue soon.
>>
>> On 10/5/2010 4:36 PM, kjhurni wrote:
>>>
>>> Hmm, I will have to try that. I've only observed that with ZCM
>>> installed (with Novell Client 4.91 SP5 on XP) that the login time
>> goes
>>> from about 12-15 seconds to about 50-70 seconds.
>>>
>>> But I've not tried "just" the ZCM agent.
>>>
>>>
>>
>>
>> --
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Knowledge Partner
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared by either Novell or any rational
>> human.
>
> I removed CASA and now I cannot sign into ZCM. I get the "unable to
> login to network because the login credentials are incorrect" Windows
> Security Message. Any ideas?
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

DHCP Conflict between ZfD 4 Agent and Novell Client

I am having problems with the use of Novell Client versions that support
DHCP settings tab (Tree, Context, Server).
This is in this board because my problem is only reproduced when ZENworks
for Destkops 4 (IR5 and IR7) Workstation Management component is installed.
THe problem is this:
Every now and then, logging in with the novell client displays 886f errors
in the login results window, and other strange communication errors.
If I release and renew the IP, it works fine after that.
If I reboot, there is a chance I get the same problem.
This absolutely does not happen when I have the two options for DHCP
settings in the Novell Client unchecked (Server->Binary Data).
Now, is ZfD Workstation Manager getting the Preferred Server IP from DHCP
as well during system startup? Is this clear? Happens on both Windows
2000 and Windows XP.
I have no access to the router serving DHCP so I don't know the details on
that end.

There was (is?) a conflict that is supposed to be solved,
but I'm not 100% convinced that is true. Since I always
use Client32 I remove novdhcp.dll in my ZfDAgent transform,
even now with ZDM7 because I've seen the "semaphore" error
there too if I don't.
See:
http://support.novell.com/cgi-bin/se...?/10090994.htm
http://support.novell.com/cgi-bin/se...?/10093676.htm
http://support.novell.com:80/cgi-bin...?/10091089.htm
Regards
Rolf Lidvall
Swedish Radio (Ltd)

Wireless Security and Novell Client

To all,
I am currently looking to upgrade our existing Network Infrastructure toa secure 802.11b network and we have purchase Cisco Secure ACS. We plan to use LEAD with our system and require a radius sign-on using our Novell Client. The problem I have is planning this and how I can setup the workstations. We use ZEN Works for our management of workstations and this means that the Novell client must be the primary sign-on. How can I get the Novell client to be the primary sign-on and still use LEAP? The Novell client requires a network connection before it can bring up a login screen. Any thoughts or tips would be greatly appreciated. Have a great day!
Adam Osterholt
Network Manager
The Children's Medical Center
Dayton, OH

We have the same configuration here at my place of work (Novell, ACS, ZEN,etc). In my testing it depended on the OS that the client was using. On the win95/98 clients I had to set the primary login to the Novell client but save the LEAP user name and password in the wireless profile within the ACU on the client. During the client boot up, the LEAP username logs in automatically and the Novell login screen appears for login. I could not get it to work properly with prompting the user to enter their LEAP username/password. This process only work as login as my ACS server database was local to the ACS server. If the ACS server is set to use an NT domain as its user DB the LEAP auto-login did not work....
I did not have this problem with win2000 or winXP clients.
Hope this helps.
Rob

Cisco ASA 5505, Cisco VPN Client and Novell Netware

Hi,
Our ISP have installed Cisco ASA 5505 firewall. We are trying to connect to our Novell 5.1 server using VPN client.
I installed VPN client on a laptop that is using wireless connection. I connect using wireless signal from near by hotel and I am able to connect to my firewall usinging vpn client and also able to login in using Novell client for XP.
When I use same vpn client and Novell client at home that is not using wireless connection, but DSL connection amd not able to login or find the tree.
The only difference in two machine is laptop using wireless connection and my home machine is using wired connection using DSL.

If your remote end of the services in question support IPsec IKEv1 as the VPN type then, yes - the 5505 can be a client for that service. At that point it looks like a regular LAN-LAN VPN which is documented in many Cisco and 3rd party how-to documents.

Removing Novell Client from Windows 7

Hello,
We have an issue with programs running slowly on our SUSE Linux server 11.0. We set up a test machine with Windows 7 without Novell Client and the same programs run extremely fast. (They run fast on a Windows 2008 server too with or without the client.) This is great for the new test machine but I have about 20 workstations that need to have the Client removed. If we remove it through control panel (both NICI and Novell Client - whatever version is installed) the programs are still slow. However, if we do a restore to the time before the Novell client was installed, the machine is fast. Because these machines have had the Novell Client installed for months, we cannot go back to an old restore point. Is there some registry file or other file that needs to be removed or changed to make the computer like it was installed without the Novell Client? I really do not want to have to rebuild 20 computers in order to fix this. I have researched the web and forums and cannot find any information about anything else that needs to be changed when the Novell client is removed. FYI - this is the same on our few Windows XP machines with the appropriate last updated Client on them.
Any help would be welcome!
Susan

We have had many issues with the Novell Client / Windows 7. Here is what we have done to get to an acceptable point.
We are running OES 11SP1 fully updated up until July (Getting ready to apply more updates), we are also talking about switching from CIFS to Samba as we have been seeing some weirdness with CIFS and NSS disconnects.
OES11 SP1 - Primary File Server NSS with CIFS
OES11 SP1 - DSFW/DNS Server for Domain Authentication for the CITRIX Servers, this server also runs ZCM 11.2.2 (Also going to update this as we need windows 8 support and the ZCM Agent has some issues at this level; however ZCM has a horrible way to apply updates and is time consuming)
OES11 SP1 Squid Proxy With transparent user authentication using LDAP with SquidTrust. Also has NSS Shares
Other servers exist as well.
We standardized on Novell Client 2 SP3 or Greater. Currently SP3 IR3 is what is in use. But prior to SP3 the client had many issues for us.
Also, We do not use Group policy with ZCM (We tried But it was painful and slow and policies would randomly just quit working / remove themselves) we reverted back to just digging in and finding the registry keys. If a key only existed in the Policy Section we put it there and do a GPUPDATE /force on login.
Server Settings:
Disable OPLOCKS
Workstation Settings:
NW Client Settings
File Commit (Enabled)
File Cache (Disabled) - NW Client Setting
Name Services DNS / SLP Only (Default on the newer Netware Client)
Win7 Machine Settings:
Static DNS Server - Set to the internal servers only. No external server set. The win 7 machines for some reason would use the secondary DNS Server randomly instead of the primary, never really dug in on why but disabling / removing a public DNS Server as the secondary and adding in a second internal.
MS Client For Microsoft Networks Remove, We tried changing the preferred order on the network adapters with no help. I believe the fact that we are running CIFS on the Server side the client is having issues with deciding on how to connect to the NSS Volumes when the client is installed. With the MS Client removed we see a huge improvement In the Novell client.
Libraries Disable - Registry - We redirect Documents Folders and such and these libraries are wanting to index the locations. As the Libraries consist of multiple locations.
Offline Files Disable - Registry
Windows Search Disable Registry (Service)
Zone Mapping - Registry Adds the servers & domain to the Trusted list for the OS (Even though it says Internet Explorer its used by other portions of the OS)
User Access Control Registry
I have others that helped but this is the short list of changes that made major improvements.
When I have a moment I will look back and see if there are other major changes. This is just what I remember.

Novell Client breaks LUM

Hi,
SLED11 SP2 (confirmed same on SP1)
I am trying to set up integrated login as per:
Support | How to set up Single Sign-On for Novell Client for Linux on SLED 11.0
and have done this Support | Single Sign-On does not work after initial setup.
I have LUM working correctly on SLED 11 Sp2 without the Novell Client installwed - all works 'as it should' edirectory users can login and accounts and user home dirs are created. Once the Novell Client is installed, LUM is broken. Specifically namcd is dead and cannot be started with this error:
Starting NAM Cache Daemon .../usr/sbin/namcd: /usr/lib/libldapssl.so.0:: no version information available (required by /usr/sbin/namcd)
Removing Novell Client and CASA results in LUM working again.
Does anyone have any idea how to fix this?
Thanks in advance,
Trevor Storr

No - and even if it does not break it, LUM and Novell Client do not
really work well together in my experience. Personally I have decided
to not use LUM on Linux client PCs anymore.
But maybe somebody else found a working solution for this.
W. Prindl
tstorr wrote:
>
>Hi,
>
>SLED11 SP2 (confirmed same on SP1)
>I am trying to set up integrated login as per:
>
>'Support | How to set up Single Sign-On for Novell Client for Linux on
>SLED 11.0' (http://www.novell.com/support/kb/doc.php?id=7005012)
>and have done this 'Support | Single Sign-On does not work after
>initial setup.' (http://www.novell.com/support/kb/doc.php?id=7006896)
>
>I have LUM working correctly on SLED 11 Sp2 without the Novell Client
>installwed - all works 'as it should' edirectory users can login and
>accounts and user home dirs are created. Once the Novell Client is
>installed, LUM is broken. Specifically namcd is dead and cannot be
>started with this error:
>
>Starting NAM Cache Daemon .../usr/sbin/namcd:
>/usr/lib/libldapssl.so.0:: no version information available (required
>by /usr/sbin/namcd)
>
>Removing Novell Client and CASA results in LUM working again.
>
>Does anyone have any idea how to fix this?
>
>Thanks in advance,
>
>Trevor Storr

Cisco VPN client and Novell and Panda AV

I have found an issue with one of my clients PC's that prevents him from using network resources over the VPN tunnel.
PC
Win XP SP2
VPN client - 5.0 (Newest download)
Novell - Client 4.91 SP4 for win 4.91.4
Panda AC 4.02.40
Ok here's what happens
I made a PCF file for a handful of users to connect in and be able to access 2 servers.
On the machine with the above information installed. It will connect to the VPN. Everything seems fine but if I RDP or ping access to the server it will not go. I then installed it on my machine and it works.
So I fully investigated the one PC that doesn't work. I noticed in the TCPIP stack of both the Ethernet card and the Cisco adaptor. There is a Novell client and a panda client.
Now if I uncheck one or the other it works. (I know there's posts about panda not working and the posts are 2 years old) It will work with just panda or Novell. When I check both it fails.
Now has anyone seen this issue with these two products installed on a machine with Cisco VPN.
Also, who should this go to, Novell, Panda or both?

I stated i did that and it works. Each one works when its the only thing checked.
Thanks
Though

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

Novell client for linux - scripted install and configure

the novell client is included in SLED11 SP1
the configuration files are in /etc/opt/novell/ncl (esp login.conf)
I want to script the configuration of the novell-client. Some of the things the interface yast - Novell client does, is:
modify /etc/pam.d/gdm
create /lib/security/pam_ncl_autologin.so
... and maybe more....?
according to Novell Documentation there should be a make_novell-client-conf_rpm Bash script but i cant find it in any of the recent clients (download) nor on the SLED installation.
I think just copying pam.d files and the .so file will work, but might cause troubles in the long run.
What should i do to create these by script?

Originally Posted by lowalcohol
assuming this will do the same as installing it from yast - software, the client is not configured (tree, context, slp) and lacks key files such as /lib/security/pam_ncl_autologin.so needed for integrated login.
/lib/security/pam_ncl_autologin.so is updated by the post processing inside the rpm's. We don't need to do anything. however there is much to do. i'll show what i do. You need to change the variables and entries to suit your env.
create a repo on a build server using the following in fstab
Code:
/srv/www/htdocs/iso/novell-client-2.0-sp2-p2-sle11-i586.iso /srv/www/htdocs/novcli2.sp2/i586 iso9660 user,auto,loop,uid=30,gid=8 0 0
/srv/www/htdocs/iso/novell-client-2.0-sp2-p2-sle11-x86_64.iso /srv/www/htdocs/novcli2.sp2/x86_64 iso9660 user,auto,loop,uid=30,gid=8 0 0
add a repo to the install
zypper -n ar --refresh http://build/novcli2.sp2/$PROC "Novell client 2"
add in bits for ldap
Code:
cd /tmp
wget $WEBPATH/ldap.tbz2
if [ -s ldap.tbz2 ]; then
cd /
tar xjvf /tmp/ldap.tbz2
cd /tmp
fi # if [ -s ldap.tbz2 ];
echo '+::::::' >>/etc/passwd
echo '+' >>/etc/shadow
echo '+:::' >>/etc/group
ldap.tbz2 contains the following after they been changed by 'yast ldap'.
\etc
\etc\ldap.conf
\etc\nsswitch.conf
\etc\openldap
\etc\pam.d
\etc\openldap\ldap.conf
\etc\pam.d\common-account-pc
\etc\pam.d\common-auth-pc
\etc\pam.d\common-password-pc
\etc\pam.d\common-session-pc
add in the client
Code:
zypper --no-refresh --no-gpg-checks -n in -l -t pattern novell-ncl
#lock the files to protect them from future 'zypper dup'
zypper al nici64 novell-client novell-client-script novell-konqueror-plugin novell-nautilus-plugin novell-nmasclient novell-novfsd novell-qtgui novell-ui-base novell-xplatlib novell-xtier-base novell-xtier-core novell-xtier-xplat yast2-novell-client
chkconfig micasad on
configure the client
[CODE]
sed -i s/";net.slp.useScopes.*"/"net.slp.useScopes = FRED, LARRY"/ /etc/slp.conf
sed -i s/";net.slp.DAAddresses.*"/"net.slp.DAAddresses = 10.251.1.99, 10.249.1.99"/ /etc/slp.conf
mkdir -p /etc/opt/novell/ncl
echo Allow_Integrated_Login=true >/etc/opt/novell/ncl/login.conf
echo Default_Tree=XXXXX >>/etc/opt/novell/ncl/login.conf
echo Default_Context=XXX.XXX.XXX >>/etc/opt/novell/ncl/login.conf
echo Default_Server=servername >>/etc/opt/novell/ncl/login.conf
echo DHCP_Tree=true >/etc/opt/novell/ncl/protocol.conf
echo DHCP_Server=true >>/etc/opt/novell/ncl/protocol.conf
[CODE]
(reboot)
These are files installed during build stage, but are used when the client logs in.
in /etc/skel/.novell/ncl, i have a copy of StartupLogin.conf as StartupLogin.conf.new
this file has information in it, but it will be wiped.
in /etc/skel/.kde4/Autostart/logon.sh, i have
Code:
if [ ! ~/.novell/ncl/StartupLogin.conf.new ]; then
mv ~/.novell/ncl/StartupLogin.conf.new ~/.novell/ncl/StartupLogin.conf
FDN=`ldapsearch -x -h 10.251.1.99 -b ou=its,o=fca | grep -i 'dn:' | grep -i $USER | grep -iv workstation`
CONTEXT=`echo $FDN | cut -d, -f2- | sed -e 's/ou=//ig' -e 's/o=//ig' -e 's/,/./ig'`
sed -i "s/UserName.*/UserName = $USER/" ~/.novell/ncl/StartupLogin.conf
sed -i "s/FDN.*/FDN = $FDN/" ~/.novell/ncl/StartupLogin.conf
sed -i "s/Context.*/Context = $CONTEXT/" ~/.novell/ncl/StartupLogin.conf
sudo /bin/update_login.conf.sh $CONTEXT
fi # if [ ! ~/.novell/ncl/StartupLogin.conf.new ];
/bin/update_login.conf.sh has the following and has '%users ALL=(root) NOPASSWD:/bin/update_login.conf.sh' added to /etc/sudoers
Code:
if [ ! -z "$1" ];then
sed -i "s/Default_Context=.*/Default_Context=$1/" /etc/opt/novell/ncl/login.conf
fi
So far this is working well.
The novell login needs to be run once, and on the advanced tab, have the session saved. This then auto runs afterwards for each logon.
as a troubleshooting tool, I :
Code:
cp /etc/etc.1
rsync -avP etc* my-pc:/tmp/
i can then use krusader to compare files (on my-pc), but most importantly, after doing something (eg yast ldap). rerun the rsync line and and it will tell exactly which file(s) changed, so you know which ones to check/keep/alter/etc
hope this helps.
ph

Error same login (novell client and VO)

We have some problem about as below:
We use Windows XP SP2 and install the Novell Client on them. Log on to the Novell NetWare 6.5 SP6 server already and we would like to use Virtual Office (1.6.2) by using browser (IE6, IE7, Firefox). We can authenticate when browse to Virtual Office.. they look like smoothly but we could not authenticate when we click the file button (NetStorage). It will show the authenticate form Username and Password. We couldnt use the same login name for authenticating this form (same = login on novell client and login on VO>>file)BUT.. if we use another user for authenticate the NetStorage on Virtual Office by using browser.IT CANWHY?????
What happen about our Virtual Office or NetStorage on NW6.5SP6?
Please recommend us for solving this problem and thanks.

Is it possible that you are using concurrent login limitations for your users? That could prevent you from using a web based login if you are already consume a workstation based login.

Novell Client and Login Scripts?

All:
I'm a former administrator of NetWare 3.x, 4.x and 5.x systems and am
intrigued by the NLSBS 9 offering. I have downloaded the trial version
and have installed it on a test server.
Since I am "old school", I was wondering if I could use the Novell Client
for Windows XP and login scripts to automatically map shares using groups
like I did back in the day.
I'm very new to the Novell/Linux world since every organization I've
worked for in the past 10 years abandoned NetWare for Windows. I'm sure
a LOT has changed since the Linux OS was brought on board, so I thought
I'd ask.
Thanks,
Greg

Not sure. It would depend on whether Novell is still offering a product upgrade to the OWS from Windows 2000 SBS and what that price looks like. Otherwise, I was more thinking about the software side itself, re: the Linux side. Either way will work. Just work out the figures.
>>> <[email protected]> 5/23/2006 5:02 am >>>
I guess I'm looking at it this way: If I purchase the 5-user upgrade
license of NLSBS for $211.00 which includes upgrade protection, then
according to Novell, I can upgrade to OWS for free after July 31st. A 1-
user license for OWS at CDW is about $125.00. $125.00 x 5 = $625.00.
Is my logic flawed?
> Why not just get the Open workgroup suite? Its basically the same
thing, =
> but you will have todays licences instead of the licence that is
already =
> obsolete according to Novell.
>
> >>> <[email protected]> 5/17/2006 12:30:13 pm >>>
> Will do. Thanks guys!
>
> I'm getting ready to pull the trigger on purchasing the Novell Linux=20
> Small Business Suite product. I'm going to get the Upgrade version =
> with=20
> 5 users licenses and one year of upgrade protection for a little over=20
> $200.00 from CDW. I guess I can get by with the Upgrade version since =
> I=20
> have a full retail copy of Microsoft SBS 2000 still in the
shrinkwrapped=20=
>
> box. Also, a representative of Novell told me in an e-mail today that =
> if=20
> I have upgrade protection on NLSBS, then I can upgrade to the new =
> Novell=20
> Open Workgroup Suite for free when NLSBS goes out at the end of July.
>
> Sounds like a win-win to me...
>
> Thanks again,
> Greg
>
> > I also had a link to a cool solution, that explained how to use
LDAP=20
> etc.. =3D
> > to link up NDS to the Linux box so you could use that to manage user
=3D
> > accounts.
> >=20
> > Let me know if you need that and I can dig it up.
> >=20
> > >>> <[email protected]> 5/16/2006 10:05:48 am >>>
> > All:
> >=20
> > I'm a former administrator of NetWare 3.x, 4.x and 5.x systems and =
> am=3D20
> > intrigued by the NLSBS 9 offering. I have downloaded the trial=20
> version=3D20
> > and have installed it on a test server.
> >=20
> > Since I am "old school", I was wondering if I could use the Novell =3D
> > Client=3D20
> > for Windows XP and login scripts to automatically map shares using =3D
> > groups=3D20
> > like I did back in the day.
> >=20
> > I'm very new to the Novell/Linux world since every organization =
> I've=3D20
> > worked for in the past 10 years abandoned NetWare for Windows. I'm
=3D
> > sure=3D20
> > a LOT has changed since the Linux OS was brought on board, so I=20
> thought=3D20
> > I'd ask.
> >=20
> > Thanks,
> > Greg
> >
>

Novell Client 2 SP3 and the inability to log in the Win7

Novell Client 2 SP 3 for Windows 7 64 bit and the inability to log into the desktop for a "NEW" user
My issue is that If the username exist already in Windows 7, I can log into Novell and the Window 7 desktop will load
HOWEVER if the username doesn't exist and I attempt to log in, I'm able to log into Novell Client
BUT I get prompted with another window titled Log on to this Computer with a check box Change your Windows password to match your Novell Password after success login.
1) I insert the password and
2) check the box
The Result is a line that says The Local computer username or password is not valid
Any suggestions would be most appreciated

On Mon, 08 Apr 2013 20:26:02 GMT, MurphNE
<[email protected]> wrote:
>
>I must be saying it wrong. let me try it this way.
>
>When a user that never logged into the PC logs in the Desktop used to
>create the user profile for that username now I get nothing other thean
>the message from my earlier post.
>
>So here is what happens when a user trys to log in to a PC they have
>never logged into before.
>
>The user get past the Novell login but the Windows 7 PC will not let
>username log in (they get the message in the post above)
Sorry, but that is even less clear. I'll make some assumptions.
* You have a Win7 PC.
* The user already has an account on the PC, but they have never
logged into it.
* When they login for the first time, they get an error that states
the username or password is not avalid.
Sounds like the user is using the wrong username or password.
In your first post you state:
"BUT I get prompted with another window titled log on to this Computer
with a check box Change your Windows password to match your Novell
Password after success login?"
At that point you must enter the password assigned to the account on
the PC. Depending upon how you created the account, it may not be the
same as thier eDirectory password.
If that doesn't help, try explaining again...or maybe someone else
will jump in that understands what you are trying to do.
Ken

Install Novell Client and ZFD client question

Currently I am doing an unattended install of the Novell client and then a
login script install of the ZFD client. Is there a way to install the novell
client and then kick off the install of the ZFD client before rebooting? Or
would this cause more trouble then its worth?
Thanks for the help.
Rich

Rhuhman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Radius and the Novell Client

Is there any capability for the Novell Client to use radius authentication.
We're putting in Cisco Clean Access and we'd like a pass through
authentication. Clean Access already uses LDAP/eDirectory for
authentication. We're not crazy about using Secure Login as that has seen
more than afew issues for us.
Any ideas? Perhaps a BorderManager widget somewhere?

> Is there any capability for the Novell Client to use radius authentication.
>
And what has thid got to do with Queue-based printing?? ;)
Try the client forum.
- Anders Gustafsson, Engineer, CNE6, ASE
NSC Volunteer Sysop
Pedago, The Aaland Islands (N60 E20)
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
http://support.novell.com/enhancement
Using VA 5.51 build 315 on Windows 2000 build 2195

GW 2014 and Novell Client

Similar Messages

Maybe you are looking for