GW7 - Unable to delete Domain & MTA objects after crash

Yes...I know there are similar threads already on the forums...but I'm still stuck :)
Had a server crash - which was running GW7 WebAccess & hosted a Domain (Domain_3 in our case). And naturally, this server was put together by a long gone consultant years ago - who left little documentation and no current backup (well, we thought we had one...but it didn't restore). So I was left to wing it on my own.
Rebuilt a server from scratch (NW 6.5 SP8). The server sits it's own tree and is in a DMZ off of a BorderManager server (multi-homed - and yes...life on the trailing edge of technology).
I was unable to delete or use the existing GW objects (Domain_3, MTA or WebAccess)...so I created a new domain (Domain_2) and reinstalled WebAccess and the MTA. I used the same IP addresses/ports as the original/crashed server.
This got us back on our feet and WebAccess seems to be working as expected.
I've since tried following various TIDS about grafting the legacy objects into another part of the tree, etc. Unfortunately, the grafting process likewise failed after seemingly creating the domain & MTA objects. An error message indicated that I (as admin) didn't have sufficient rights (hard to believe...). So now I have two Domain_3 objects (w/MTAs, etc.) in different parts of the tree - which are non-functional and un-delete-able (if that's a word).
I also managed to create another temporary domain object (Domain_9) in testing - which now won't allow me to delete it either (ugh)!
I also found numerous pending GW operations - including the deletes, modifies, etc.
Digging deeper - I have some stuck obituaries that are all related to the domain objects that I'm trying to get to disappear. Of course, I tried to free these stuck obituaries following various TIDs (which I've done in the past for other non-groupwise objects stuck in limbo) - but failed. I'm not sure if this is a cause, an effect, or just collateral damage...
So I'm 10 miles past frustration...and have obviously hosed this pretty well...
Any suggestions or guidance on where to focus my attention first?

That's how I ended up with a 2nd copy of Domain_3 :) I created a temporary container - and tried to graft Domain_3. It created a domain object and a MTA - before failing (the error said I had insufficient rights to complete the task). Naturally, I couldn't delete these new objects either once they were created I performed this action as "admin" - authenticated to both trees (the GW objects are actually in our production tree).
KM

Similar Messages

Unable to Delete the Business Objects Installation folder

Hi,
I am trying to re-install the Business Objects 4.1 SP4 on my Dev Machine. I have un-installed BO4.1 by going to Control Panel>programes & Features>uninstall. After i completed the unistall process i have rebooted my machine and still saw the Business Objects folder in the Installation Drive.
I am trying to delete the folder but unable to do it. it reads 'The Action Cant be completed because the folder or file in it is open in another program'. is there any way to get rid of this error and delete the folder to start fresh new installation??

Hi,
To delete the folder you can use rococopy command.
Follow steps
1) Create one dummy folder "xx" on the same level where the already folder exists.let say i want to delete Test folder and folder location is F:/Test and create xx on the same level.
2) Go back one level up like on F:/ drive right click and command prompt.
3) run the command robocopy Test xx /MIR
After that you will be able to delete the folder.
or run one more command to delete the folder from command prompt.
rd/s F:\Test
Regards,
Amit

Deleting not needed objects after impl. of a solution

Hello everyone,
some time back, we developed a solution in BW7.0. All queries, reports are working fine.
We don't need to feed our data targets anymore. In order to keep these upward queries operational, We want to keep only needed objects i.e. cubes, Multiproviders, DSOs...etc while delete everything else which are not needed like DSOs, transformations, routines, DTPs, Process chains...etc.
What could be no. of steps to consider and how to access the impact of deleting any object. Any guidelines?
Thanks
Ahsan

Hi,
Thanks for replying. We don't need to update data. Queries are using data from certain Multiproviders where data are residing in IC, DSOs and InfoObjects.
Main thing to check is: if an Active table of a DSO is being used in any routine of another transformation or anywhere else which we don't want to delete. This is like doing the impact analysis of a deletion of a DSO. If a DSO being used under MP1 and here we say we want to delete it, but then may be this DSO is being used under MP4 where we want to keep it, end decision keep the DSO.
Following a post on SDN, I checked in RSAABAP table by giving active table of a certain DSO and it shows no entries. But I am sure we have used this DSO's active table in some routines.
Any input, please share
Thanks

Unable to delete some app's after lollipop update

Hi! After I updated my Z2 to lollipop today, I moved some app's to my sd card. I was not aware that it was not working properly.
Later I saw that the app's I moved cannot be opened or even deleted and when I reinstall them again they don't even show up. Can someone help me pls! I have attached a screenshot also.

I would think that your sd card it's corrupted, what if you re-install lollipop but this time clear everything
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Unable to delete RECORD in AppServer, after migrating form 6i to 11g

Hi All,
I am facing an issue, we have migrated a form from 6i to 11g the logic in "key-delrec" throws error in 11g while it is same and does not throw any error in 6i, whenever the record is tried to delete it is showing the error and if the commit_form or delete_record is commented then it does not show any error.
can anyone has the solution for this.
Thanks

+"...the logic in "key-delrec" throws error in 11g..."+
Great information ! You suppose we all have a crystal ball that will tell us what is the exact error ?
Francois

Unable to create or update object after creating database

I have installed Oracle 8.1.6 on a Solaris server (with documentation, cause I'm not expert of Unix).
Next I have created a database and a user (with the doc too !!)
I can make select on all the objects of this database (system tables for example). I have created one test table without any problem. Now I can't create any table or update the table on the server or on a client (the sql + froze). The select orders work. I tried to restard the server but the problem is the same.
Thank you very much for your help

There are no error ! (alert.log)
The sql plus (on the client or on the server) froze when I launch the create or update command. The select command works.
Thank you very much.

Need Help-SOA 11g File Adapter unable to delete input file and its crashing

Hi All
Please find the details below:
1. We have created a simple SOA composite to Read file from an input directory, archive the file in an archive directory using Inbound File Adapter Read
and then use Outbound File Adapter Write to move the file to a output directory.
2. File Adapter needs to delete the file after successful read/retrieval.
3. We are using the "Use Trigger File" for invoking the file adapter. This is a new feature in SOA 11g
4. Also we are using the option of reading the file as an attachment as we are not doing any transformation in the composite
Issue Details_
1. When the trigger file is put in the input directory for the first time, the File Adapter reads the file, archives it and moves it to the output directory
2. However it does not delete the input file from the input directory and raises Fatal Exception mentioned below:
[*2011-01-12T16:55:48.639+05:30] [soa_server1] [WARNING] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@19c243d]*
[userId: <anonymous>] [ecid: 0000IptyLrL9_aY5TrL6ic1DBOS_000009,0] [APP: soa-infra] File Adapter FileAdapterTriggerFilePOC PostProcessor::
Delete failed, the operation will be retried for max of [0] times
[2011-01-12T16:55:48.639+05:30] [soa_server1] [WARNING] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@19c243d]
[userId: <anonymous>] [ecid: 0000IptyLrL9_aY5TrL6ic1DBOS_000009,0] [APP: soa-infra] File Adapter FileAdapterTriggerFilePOC [[
BINDING.JCA-11042
File deletion failed.
File deletion failed.
File : C:\Dibya\AttachmentTest\InputDir\TestFile3.txt could not be deleted.
Delete the file and restart server. Contact oracle support if error is not fixable.
If any one has faced similar issues, kindly provide pointers on how to resolve it.
Regards,
Dibya

Hi,
Using the file adapter, you can poll from multilple locations...
Keep the following property in your .jca file
<property name="DirectorySeparator" value="," />
While giving the path in File Adapter configuration, keep comma and give the next location....then the file will be picked up from the locations you gave....
Hope this helps...
Thanks,
N

New Domain's MTA object missing in eDir -- What to do?!!

We are consolidating a sprawling GW system of 6000+ users spread across 52 PO's down to a more manageable system of just 10 PO's centrally located. We are running GW 8.0.3 hp2, moving from legacy NetWare 6.5 SP8 servers to new Windows 2008 servers (virtualized on ESXi 5). As we are building the new servers, we are creating the new Secondary Domains and Post Offices (one PO per Domain) in ConsoleOne.
One particular domain, however, has given us a fit. There was clearly some unknown error that occurred during its creation, and what I have now is a domain with an MTA that shows up in C1 in the GroupWise view, but not in the eDirectory Console view. I can neither delete the object from the GW view, nor create its counterpart in the eDir view. Ergo, I'm stuck -- so WTH do I do?
If I try to delete the MTA object from the GW view, I just end up with a Pending Operation that never clears. Trying to create the MTA object in eDir gives the following error:
http://farm9.staticflickr.com/8522/8...3a99714b_z.jpg
Trying to start the MTA service on the Windows host gives the following error:
http://farm9.staticflickr.com/8098/8...d4ef07b440.jpg
(The message behind the error dialog box just says "GWMTA: Unable to register with SNMP agent. SNMP for this agent is disabled.")
//bg

In article <[email protected]>, BGunnells wrote:
> Problem solved. After the database rebuild, the MTA service was
> running stably and was able to process administrative messages, and the
> delete operation(s) worked.
>
Thank you for sharing your efforts and their success.
Another option would have been to try grafting the MTA to eDir, though
given the oddities of how it happened, your solution was likely the
healthiest.
Have you checked your eDir health to make sure there isn't a problem
brewing there that will slow you down again?
Andy Konecny
Knowledge Partner (voluntary SysOp)
KonecnyConsulting.ca in Toronto
Andy's Profile: http://forums.novell.com/member.php?userid=75037

Unable to delete/create integration models.

Hi All,
I need to correct some int.models wrt the logical system.
1) CFM1 u2013 choose variant pops up a msg- logical system not maintained in NDV2. This is not supposed to be maintained. I need to change the variant models for a different logical system that is maintained in NDV2.
2) CFM7- delete all models.- I am unable to delete the models even after making them inactive.
Final objective is to delete all the models- active and inactive and recreate new ones as nomenclature needs to be same. I canu2019t maintain the wrong (present) logical system in img, that's seen in the IM variants that do not lend themselves to change. The moment i do CFM1 it pops up a an error screen referring a wrong logical system..
Pls., guide step by step.
Regards,
Lok

Thanks Lakshmi,
I began on the same note as wass evident but i did not have the wb request auth required. so was thinking if there is another was out fiddling with user transactions of IMs
Thanks for prompt reply. Awarded full 10 points.
Regards.
Lok

Unable to delete file after in a file adapter

Hello,
I have a BPEL process , which gets invoked when there is a new .PDX file in a folder. After processing the data from the file , I want to move into the archive folder. The process moves the file properly to the archive folder, but I am unable to delete the file from the folder I read it from.
One solution that worked was forcibly dehydrating the process using a checkpoint(). But that seems a very inefficient solution considering its expensive to do this step. Does any one else have a better solution?
Thanks

Just check the option "Delete after reading" in Adapter wizard if that is something you can do.. Adapter automatically deletes it once the file is moved to archive..

Unable to delete User object in FIM Portal - Cannot find the object "#calculateRequestSetTransitionsAssembleStatementsPartition"

Hi,
***Problem
I encounter a problem with FIM (version 4.1.3441.0 and 4.1.3496.0) when I try to delete a User object (and only a User object) whatever if it is
manually/Expiration Workflow/Powershell.
Deleting a User object used to be perfectly functional and, without any product version modification, stopped working. I haven't neither deleted/modified or add a
"Grant" MPR or any of the corresponding Sets since last time I saw it working.
Displayed error is "Request could not be dispatched" in FIM Portal and is referencing a stored procedure in Event Viewer.
***Error details
When I try to delete a User object, here is the output :
Portal
"Processing error" on submit
with the following details
Request status is stuck at "Validating" until next restart of FIM Service (after what it becomes “Canceled”)
Request’s “Applied Policy” tab does not contain any MPR where, at least, a “Grant” MPR is expected
As SQL Timeout is relatively high and error happens quickly, I don’t think there is a Timeout problem under that.
Logs
« Application »
The Portal cannot connect to the middle tier using the web service interface. This failure prevents all portal scenarios from functioning correctly.
The cause may be due to a missing or invalid server url, a downed server, or an invalid server firewall configuration.
Ensure the portal configuration is present and points to the resource management service.
« Forefront Identity Manager »
Reraised Error 50000, Level 16, State 1, Procedure ReRaiseException, Line 37, Message: Reraised Error 1088, Level 16, State 12, Procedure CalculateRequestSetTransitionsAssembleStatements,
Line 332, Message: Cannot find the object "#calculateRequestSetTransitionsAssembleStatementsPartition" because it does not exist or you do not have permissions.
Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 1, current count = 0.
Microsoft.ResourceManagement.WebServices.Exceptions.UnwillingToPerformException: Other ---> System.Data.SqlClient.SqlException: Reraised Error 50000, Level 16, State
1, Procedure ReRaiseException, Line 37, Message: Reraised Error 1088, Level 16, State 12, Procedure CalculateRequestSetTransitionsAssembleStatements, Line 332, Message: Cannot find the object "#calculateRequestSetTransitionsAssembleStatementsPartition"
because it does not exist or you do not have permissions.
Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 1, current count = 0.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler,
TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult
result)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.ResourceManagement.Data.DataAccess.UpdateRequest(RequestType request, IEnumerable`1 updates)
   --- End of inner exception stack trace ---
Requestor: urn:uuid:7fb2b853-24f0-4498-9534-4e10589723c4
Correlation Identifier: e7209633-46d0-4f4b-a59e-807649ef71ea
Microsoft.ResourceManagement.WebServices.Exceptions.UnwillingToPerformException: Other ---> System.InvalidCastException: Specified cast is not valid.
   at Microsoft.ResourceManagement.WebServices.RequestDispatcher.CreateRequest(UniqueIdentifier requestor, UniqueIdentifier targetIdentifier, OperationType
operation, String businessJustification, List`1 requestParameters, CultureInfo locale, Boolean isChildRequest, Guid cause, Boolean doEvaluation, Nullable`1 serviceId, Nullable`1 servicePartitionId, UniqueId messageIdentifier, UniqueIdentifier requestContextIdentifier,
Boolean maintenanceMode)
   at Microsoft.ResourceManagement.WebServices.RequestDispatcher.CreateRequest(UniqueIdentifier requestor, UniqueIdentifier targetIdentifier, OperationType
operation, String businessJustification, List`1 requestParameters, CultureInfo locale, Boolean isChildRequest, Guid cause, Boolean doEvaluation, Nullable`1 serviceId, Nullable`1 servicePartitionId, UniqueId messageIdentifier)
   at Microsoft.ResourceManagement.WebServices.ResourceManagementService.Delete(Message request)
   --- End of inner exception stack trace ---
For information, a maintenance plan rebuild/reorganize indexes daily and this problem has occurred on servers with different performances.
Is any of you has already encounter this problem ?
Any help would be greatly appreciated,
Thanks in advance for your help,
Matthew

While there are several SQL Agent jobs (FIM Temporal Events, Maintain Sets, and Maintain Groups among others)created by the FIM install only one of those is enabled and scheduled and it calls all of the same stored procedures that the other
jobs do. Step 2 is Maintain sets and Step 3 is maintain groups. So the Maintain sets and groups jobs never need to get enabled and scheduled, but if you want them to be maintained more frequently then you can.
David Lundell, Get your copy of FIM Best Practices Volume 1 http://blog.ilmbestpractices.com/2010/08/book-is-here-fim-best-practices-volume.html

I am unable to delete my emails from yahoo after I have read them. I can check an email and press delete but the email remains and I am collecting a lot. what should I do?

I am unable to delete my emails from yahoo after I have read them. What should I be doing to correct this problem?

marjoriefrommm,
First go to mail preferences>accounts>mailbox behavior and under trash click "move deleted messages to the trash mailbox, the delete them from there.
Also got to your Yahoo mail and check your settings there.

Why am I unable to delete the default track (which seems to act as the master, right?) after making a rough mix? Is it possible to delete the default track after having rendered a mix?

Why am I unable to delete the default track (which seems to act as the master, right?) after making a rough mix? Is it possible to delete the default track after having rendered a mix? I did a rough mix and now cannot change the song as the tracks that were a part of the rough mix seem to remain in the song even though I mute the tracks for a new mix. For instance, I played and recorded a different bass line. Muted the original, but when trying to create the new mix I can hear the original bass line even though I have muted that track. It seems to remain in the previous master (default) track. Please send help. Thank you.

Before answering your question, you have to make sure you understand the difference between the different track types in GarageBand.
Tracks, you record your music on
There are three types of those Tracks.
MIDI Tracks (aka Software Instrument Tracks)
Audio Tracks (aka Real Instrument Tracks)
Drummer Track (only one per Project)
Global Tracks
These are the Tracks that can be shown/hidden at the top of the Tracks Area for specific purposes.
Arrangement Track
Movie Track
Transposition Track
Tempo Track
Master Track
This Track can also be shown/hidden in the Tracks Area. Please note, you cannot delete that Track, only hide it, similar to the Global Tracks
Regarding the Tracks you record your music on, you can delete any of those. It doesn't matter if you created them or there are part of a Template (maybe that is what you refer to as the default track). Once you delete the last Track, the "New Track Window" will pop up to add a new track.
I will explain all that in much more detail in my manual "GarageBand X - How it Works".
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Unable to Delete PI Integration Directory Objects

Hello Experts,
We are facing a strange problem in our system. When we wanted to delete some unwanted objects from Integration Directory from my user, I can't see any more in Object View, however can see in Change List with some X (red) mark before the object.
These objects are still remain and visible to other users in the respective scenarios.
When we try to delete from there, a confirmation pop-up dialog appears stating that data/object will be lost, when confirm (it says it is deleted) but remains in the change list.
We have verified in the object locked list, but there also nothing was locked.
Regards, Alex.

Hi,
You need to activate the change list where the deleted objects are present for the deletion to reflect in the runtime cache.
Also, if these deleted objects have been transported to higher environments, you would need to transport the deleted objects for the deletion to reflect in the higher environments as well.
To do this, when creating the transport, keep the check box "Include deleted objects checked". Then you can select the deleted objects to be included in your transported (deleted objects would be indicated with a bin icon).
Regards

How to Retrieve Last Deleted objects after activating

Hi Experts
Is there any way to get back the deleted objects. I mistakenly deleted few imp objects and now wondering do XI have some versioning to get that back.
Regards
DhanyaR Nair

Hi,
If you know the exact name of deleted object you can get the same with this technique.
Step 1: Create a dummy object with the same name [of course your namespace etc should be same as your deleted object]
Step 2: Activate the new object
Step 3. Check the History [From menu] and you can select the previous versions you were deleted.
Hope this helps.
Regards,
Ananth

GW7 - Unable to delete Domain & MTA objects after crash

Similar Messages

Maybe you are looking for