GW8 SP3 Feedback on NetWare
Maybe someone at Novell is reading these posts ....
Sorry guys but this SP is not your best effort - fortunately, these are
just findings from my test system
Where to start ....
1. Get numerous C00F (password passed in open call does not match
errors on various users (on this system all 5 users show this system
randomly)
Full Top down re-build does not help
Re-starting the POA seems to fix it for a day
2.GW Install does not recognize NWC mapped drives on Windows 7 - have
to map the drives using NET USE .... and CIFS
3. POA stop responding to external POP login requests via GWIA ... have
to re-start POA
4. POA does not process system maintenance jobs - re-sending the
request just generates a Duplicate request message
Deleting the NGWcheck.db does not help
System Info
NW 6.5 SP8 with patches
GW 8.03
Windows 7 SP3 with NWC 2 SP2 IR3
Last time I opened an SR, I ended up doing all the work and it cost
$1,000. They could not come up with any real method to fix my DMS so I
did it manually.
In any case, I'm also getting COOF on NGWGuard.db on my 2 POA's ....
I see that someone else has got that too
(https://www.netiq.com/support/kb/doc.php?id=7010410)
In any case, I'm sure that others will be getting these errors and
Novell will be issuing a patch
I was going to install this patch prior to upgrading a client to 2012.
Good thing I tested first.
magic31 wrote:
>
> thhg;2206433 Wrote:
> > Maybe someone at Novell is reading these posts ....
> >
> > Sorry guys but this SP is not your best effort - fortunately, these
> > are
> > just findings from my test system
> >
> >
> > Where to start ....
> >
> > 1. Get numerous C00F (password passed in open call does not match
> > errors on various users (on this system all 5 users show this system
> > randomly)
> >
> > Full Top down re-build does not help
> >
> > Re-starting the POA seems to fix it for a day
> >
> >
> > 2.GW Install does not recognize NWC mapped drives on Windows 7 -
> > have to map the drives using NET USE .... and CIFS
> >
> > 3. POA stop responding to external POP login requests via GWIA ...
> > have
> > to re-start POA
> >
> > 4. POA does not process system maintenance jobs - re-sending the
> > request just generates a Duplicate request message
> > Deleting the NGWcheck.db does not help
> >
> >
> >
> > System Info
> >
> > NW 6.5 SP8 with patches
> > GW 8.03
> > Windows 7 SP3 with NWC 2 SP2 IR3
>
> Hi,
>
> Novell does not officially monitor these forums... If you want to give
> this some attention, and you have the option to (if you have
> maintenance on GroupWise) I'd recommend to open an SR.
>
> -Willem
Similar Messages
-
Netware 65sp7-edir8.8sp-GW8.0.2-91781 crashs now and then
Last year we had lot off crashes with our GW8.02 server on Netware 6.5sp7, mostly because the soap.nlm. The solution was patch GW8.0.2-91781 which was giving me from Novell-support.
In the meantime Novell bring out patch GW8.0.2sp2 HP1, but after reading that a lot of people have problems with HP1 and MobileSync we decide, to wait for HP2.
Till January 10 2011 the GroupWise server was stable, but on January 10 the processor is going to 98-100% cpu and we got our first ABEND this year. Strange, but can happen we thought.
On January 14 server ABEND and January 19 again ABEND.
The abend.log says something about cpu 0 (Thread .....) is on a NO SLEEP state or Address (0xF3AFF2AE) exceeds valid memory limit.
Here is short version of our ABEND.log
Novell Open Enterprise Server, NetWare 6.5
PVER: 6.50.07
Address space GWDVAW.1 removed Friday, 14 January 2011 13:40:01,977
Abend 0 on P00: Server-5.70.07: Page Fault Processor Exception (Error code 00000004)
Registers:
CS = 001B DS = 0023 ES = 0023 FS = 0023 GS = 0023 SS = 0023
EAX = F3AFF2AE EBX = 00000000 ECX = C193B790 EDX = F50EC03E
ESI = F3A463BC EDI = C193BAD8 EBP = C193BA24 ESP = C193B9BC
EIP = F3AFF2AE FLAGS = 00010282
Address (0xF3AFF2AE) exceeds valid memory limit
EIP in UNKNOWN memory area
Access Location: 0xF3AFF2AE
The violation occurred while processing the following instruction:
Running process: Server 00:56 Process
Thread Owned by NLM: SERVER.NLM
Stack pointer: C193B9BC
User Space Stack limit: 0
Scheduling priority: 67371008
Wait state: 50500F0 Waiting for work
Stack: F3DF61B2 (SCCUT.NLM|UTGetString+299)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--C17A2168 ?
--C17A20C0 ?
--01000000 (SCSIHD.CDM|__NLM_BSS_End+1A40)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
Additional Information:
The CPU encountered a problem executing code in SERVER.NLM. The problem may be in that module or in data passed to that module by a process owned by SERVER.NLM.
Loaded Modules:
EXGDSF.NLM OutsideIn Viewer Technology by Oracle. HTML Export Module
Version 8.32 6 December 2009
Code Address: F3A3E000h Length: 000005C0h
Data Address: F3A3C000h Length: 00000260h
SCCIMG.NLM HTML Export Export Interface Module
Version 8.32 6 December 2009
Code Address: F3A48000h Length: 00025250h
Data Address: F3A40000h Length: 00006C20h
VSTEXT.NLM OutsideIn Viewer Technology by Oracle. TEXT Filter
Version 8.32 6 December 2009
Code Address: F3A71000h Length: 00003CB0h
Data Address: F3A6F000h Length: 00000CD0h
Novell Open Enterprise Server, NetWare 6.5
PVER: 6.50.07
Server FS03 halted Wednesday, 19 January 2011 22:26:47,173
Abend 1 on P00: Server-5.70.07: Page Fault Processor Exception (Error code 00000000)
Registers:
CS = 0008 DS = 0010 ES = 0010 FS = 0023 GS = 0023 SS = 0010
EAX = 9FE60120 EBX = 004FFFF4 ECX = 00000016 EDX = 00000000
ESI = AC3875C0 EDI = A9CEAAA0 EBP = FFFFFFFF ESP = B2D2CA18
EIP = 00229C3F FLAGS = 00010046
00229C3F 8B7F3C MOV EDI, [EDI+3C]=?
EIP in SERVER.NLM at code start +000292DFh
Access Location: 0xA9CEAADC
The violation occurred while processing the following instruction:
00229C3F 8B7F3C MOV EDI, [EDI+3C]
00229C42 83C708 ADD EDI, 00000008
00229C45 8A157B970100 MOV DL, [LOADER.NLM|BootEnv]=01
00229C4B 8B6FFC MOV EBP, [EDI-04]
00229C4E 84D2 TEST DL, DL
00229C50 742E JZ 00229C80
00229C52 4D DEC EBP
00229C53 83FDFF CMP EBP, FFFFFFFF
00229C56 0F8444010000 JZ 00229DA0
00229C5C 833D9097010000 CMP [LOADER.NLM|PAEEnabled]=00000001, 00000000
Running process: Server 00:26 Process
Thread Owned by NLM: SERVER.NLM
Stack pointer: B2D2CA40
OS Stack limit: B2D26000
CPU 0 (Thread 9FE6D480) is in a NO SLEEP state
Scheduling priority: 67371008
Wait state: 5050010 Blocked on a Mutex
Stack: --00010001 ?
003610EA (SERVER.NLM|DirectCallPollProcedures+A)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
0020761C (SERVER.NLM|CallRegisteredPollingRoutines+44)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--9FE6D480 ?
--AC3875C0 ?
-004FFFF4 (SERVER.NLM|OSAS+0)
003608D6 (SERVER.NLM|ThreadContextSwitch+126)
--A9CEAAA0 ?
002181AD (SERVER.NLM|SchedSwitch+2A9)
--FE004260 (LOADER.NLM|OSAllocMemory+4260)
--FE004258 (LOADER.NLM|OSAllocMemory+4258)
--00000206 (LOADER.NLM|KernelAddressSpace+206)
--FE004240 (LOADER.NLM|OSAllocMemory+4240)
00205DFC (SERVER.NLM|kMutexLock+1AC)
--FE004264 (LOADER.NLM|OSAllocMemory+4264)
--FE0042C0 (LOADER.NLM|OSAllocMemory+42C0)
--AA9336C0 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--9FE6D480 ?
--A9CEAAA0 ?
0029F1BE (SERVER.NLM|UnloadLoadedFile+4C6)
--FE004240 (LOADER.NLM|OSAllocMemory+4240)
002B0904 (SERVER.NLM|GetNLMNames+48)
--B2D2CA98 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
A9FFEF57 (NIRMAN.NLM|NLMUnloading+43)
--B2D2CA99 ?
-AC2CA224 (NIRMAN.NLM|(Data Start)+1224)
--0000000A (LOADER.NLM|KernelAddressSpace+A)
--43435309 ?
--00000246 (LOADER.NLM|KernelAddressSpace+246)
--00000246 (LOADER.NLM|KernelAddressSpace+246)
--00000001 (LOADER.NLM|KernelAddressSpace+1)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000246 (LOADER.NLM|KernelAddressSpace+246)
--00000246 (LOADER.NLM|KernelAddressSpace+246)
002949E0 (SERVER.NLM|GenericEventOutput+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--AA9336C0 ?
--00000006 (LOADER.NLM|KernelAddressSpace+6)
--A9CEAAF0 ?
--A9CEAAA0 ?
0022AE55 (SERVER.NLM|ChangeAddressSpace+89)
--A9CEAAA0 ?
--AA9336C0 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--B2D2CAF2 ?
--A9CEAAA0 ?
002C3C21 (SERVER.NLM|UnloadModule+981)
--AA9336C0 ?
--43435309 ?
--4E2E5845 ?
-8FB04D4C (DS.NLM|DSRevisionName+506)
--00000004 (LOADER.NLM|KernelAddressSpace+4)
--00060034 ?
--FF020031 ?
--FF03002D ?
--02730574 ?
--B1C8A000 ?
--B2D2CB20 ?
--B2D2CB4C ?
--B2D2CB24 ?
89EC7ACC (COMN.NSS|COMN_ReleaseInternal+C)
--89EA8080 ?
--B2D2CB3C ?
89EE9FCF (COMN.NSS|COMN_CleanupNameMsg+11F)
--046E7000 ?
89F19880 (COMN.NSS|FH_DenyWriteMandatory+320)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--B2D2CC9C ?
--B2D2CC6C ?
89F1AC98 (COMN.NSS|MSG_Open+C8)
--B2D2CC30 ?
--B2D2CB4C ?
--00020205 (LOADER.NLM|BIOSDriveCount+6105)
--01020031 ?
--00000000 (LOADER.NLM|KernelAddressSpace+0)
--00000000 (LOADER.NLM|KernelAddressSpace+0)
Additional Information:
The CPU encountered a problem executing code in SERVER.NLM. The problem may be in that module or in data passed to that module by a process owned by SERVER.NLM.
Loaded Modules:
HPINET.NLM HP Data Protector HPINET
Version 6.00 4 October 2007
Code Address: 64C38000h Length: 00012FA3h
Data Address: 44AFE000h Length: 00053BCDh
HPBDANET.NLM HP Data Protector HPBDANET
Version 6.00 4 October 2007
Code Address: 522C1000h Length: 0000F123h
Data Address: 522D1000h Length: 0001D99Dh
HPBDANET.NLM HP Data Protector HPBDANET
Version 6.00 4 October 2007
Code Address: 51331000h Length: 0000F123h
Data Address: 51341000h Length: 0001D99Dh
HPVBDA.NLM HP Data Protector HPVBDA
Version 6.00 4 October 2007
Code Address: 51132000h Length: 000215A6h
Data Address: 51240000h Length: 0002E5C4h
HPVBDA.NLM HP Data Protector HPVBDA
Version 6.00 4 October 2007
Code Address: 50FFD000h Length: 000215A6h
Data Address: 51072000h Length: 0002E5C4h
HPINET.NLM HP Data Protector HPINET
Version 6.00 4 October 2007
Code Address: 50FE9000h Length: 00012FA3h
Data Address: 44A13000h Length: 00053BCDh
HPINET.NLM HP Data Protector HPINET
Version 6.00 4 October 2007
Code Address: 557F0000h Length: 00012FA3h
Data Address: 449BF000h Length: 00053BCDhOn 20.01.2011 10:36, nessen wrote:
>
> Address space GWDVAW.1 removed Friday, 14 January 2011 13:40:01,977
> Abend 0 on P00: Server-5.70.07: Page Fault Processor Exception (Error
> code 00000004)
This is a classical Document Viewer Agent abend, which on Netware will
simply not be solveable without completely disabling it.
If you want to go that route, add /gwdvadisable to your webaccess .waa
file. This will disable all inline rendering of documents and
attachments in webaccess (users will have to download attachments and
view them locally, instead of having them rendered to HTML directly).
That abend can and will hit you any time, for all times, and as I said,
on Netware is not and will never be solved or solveable. It all depends
on which attachments your users will attempt to view, and how often they
do that.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de -
POA SP3 and Data Synchroniser 1.2.3 Build 882
Hi All,
Last week we updated to Groupwise 8 SP3, running on Netware 6.5 with no issues. Since that update we have had major issues with Data Synchroniser 1.2.3 Build 882.
Every 2 to 5 hours all the IOS devices ( we only use IOS devices) will throw up password messages and not connect. When the password is entered it is unable to verify and connection is not restarted.
Restarting the Data Sync Server does not restart the sync. You have to restart the POA to get the sync working again.
On the POA there are no obvious log messages at the time the sync fails, all the SOAP login in and log outs from the Data Sync server just stop. Sometimes the password requests will come up and if you wait 10 minutes and enter password it will accept and sync will start again.
The only new message I see occassionally since the update is the following:
Error: [0000] on Debug:2 hdebug=0, htemp=0
But even this is not regular.
When you restart the POA you will in most instances have a SOAP handler that is waiting to terminate which requires server restart to clear.
I have run a full cwcheck on all the databases, a DOM and PO database check and recovery to no avail. I have checked all the POA settings against the recommended in the SP3 docs.
I am out of ideas? Any help/thoughts will be much appreciated as this is frustrating.Originally Posted by blofts
Hi All,
See the following Thread and TID which is what I am experiencing as well, seems to be all related:
TID7010410
POA SP3 Feedback
I have lodged a Support Request with Novell as per the TID, but have been advised the pacth is not ready yet as it needs testing, there is some discussion of this in the thread above. I asked about ETA which they advised is unknown but is a high priority. Novells suggestion was to backgrade to SP2HP2 if you cannot wait for fix.
We are having restart our POA 1 to 2 times a day at present.
Brad
We do have a build that we believe fixes this issue. If you have an SR open, please contact your technician and ask them for build 803-102712. If you do not have an SR open, for tracking purposes we would need you to do so. As this is a bug for which there is no public patch at the moment, the cost of the SR would be credited back.
Pam -
Upgraded from ZFD3.2 SP3 - ZFD 6.5 SP1, can't store inventory
I've recently upgraded my test server from ZFD 3.2 SP3 running on Netware
OES (NW 6.5.3 w/eDir 8.7.3.5). Everything appears to be working except
inventory. When it goes to store the .STR file, it give the following
error - Storer: started storing ....
Error in parsing xxxx.str due to other exception.
Storer: Full scan will be initiated.
We have tried it from a XP SP1 workstation running Novell Client 4.90 SP2
and from a workstion with both Novell Client 4.90 SP2 and the ZFD Mgmt
Agent. Both give the same results.
Have recreated the workstation inventory policy and deleted all workstation
objects. Newly imported workstations still give the error.
Inventory is not getting stored in the database. Any ideas?
Kathydmvkrn,
> error - Storer: started storing ....
> Error in parsing xxxx.str due to other exception.
> Storer: Full scan will be initiated.
can you post a large portion of the log file?
Jared
Novell Support Forums SysOp
Systems Analyst with Data Technique, INC.
Using XanaNews 1.16.5.2 as a News Reader
Novell eDirectory Services 1.6 Billion users worldwide
81% 0f Fortune 500 use Novell's eDirectory
Novell Desktop Management 40 Million users worldwide -
GW8 - missing dll and a question
1. XPSP3. at several points I get the message
<programname>- Unable to Locate component
Application failed to start because ccsw32.dll not found
where programname can be grpwise (or gwsync if caching)
repeats intermittently but continues apparently as normal
2. How do I adjust the frequency with which GW8 client sends and receives? Inter-MTA stuff seems to move slowly. In 6.5 it's part of 'accounts' but it isn't glaringly obvious where it is in GW8.
3. Yes it would be very helpful if GW8 had at least one newsgroup 'GW8 Beta feedback' maybe? We run GW65 normally and loading all the GW7 messages to trawl for GW8 stuff is wasteful.Originally Posted by ukdtom
Dave Robinson wrote:
> 1. XPSP3. at several points I get the message
>
> <programname>- Unable to Locate component
> Application failed to start because ccsw32.dll not found
Delete the file nwsso.dll in system32, and try again
Regarding the time adj, I don't have access to a bonsai client right
now....at a customer site....
regarding GW8 forum, it's been discussed, and still is
Tommy Mikkelsen
IT Quality A/S, Denmark
Novell Support Forums SYSOP
Sorry, but no support through email
Be a GroupWiseR, go Suspended Domain
It works! Thanks! -
Quickfinder creating spaces in words
Hello.
I am testing Quickfinder as a search solution in our office and have noticed some odd behaviour. I am running Quickfinder on OES 2 SP3 and indexing Netware 6.5 volumes. Indexes are being created and stored on the OES server without any errors that I can see.
I have setup a few test documents to see how well it finds phrases. We have a mixture of pdf, docx, doc and wpd files.
When I search for one of my test phrases, it will not always be found. If I search for a specific word or other phrase in the same doument, it finds the document.
What I have noticed, is that in the description given for that doument on the results page, the earlier phrase (that was not found), is part of the description but has odd spacing in it. For example, the word testing showed as t est ing. If I search the index for that word with the odd spacing, it finds it.
Something else I have noticed is that if I re-index the folder, the word testing will again come up but with possibly different spacing.
Has anyone else seen this?
Thanks
Scott Schaffer
Network Admin
Olive Waller Zinkhan & Waller LLP-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Did you by chance try disabling User Account Control (UAC) on the system
to see if that helped? Maybe a real browser?
Good luck.
On 04/19/2011 03:38 PM, Scott Schaffer wrote:
> Found the answer to my second question. For the links to work when using
> internet explorer on a Windows 7 workstation, you have to launch IE as an
> administrator.
>
> Scott
>
> Scott Schaffer
> Network Admin
> Olive Waller Zinkhan & Waller LLP
>
>>>> On 19/04/2011 at 11:29 AM, in message <[email protected]>,
> Scott Schaffer<[email protected]> wrote:
> Second question and the answer may make the answer to the first question
> moot.
>
> Do quickfinder results links work with Windows 7?
>
> When I run a quickfinder query on a Windows XP workstation, the resulting
> links are clickable and will open the document in the appropriate application.
>
> When I run the same query from a Windows 7 workstation, I get the same
> results page, but the links do not work. I get an error message saying
> that the states:
>
> "Cannot find 'file://path_to_file. Make sure the path or Internet Address
> is correct."
>
> I haven't found a solution for this yet. Anybody else seeing this and have
> a possible solution? If not, since we are starting to move to Windows 7
> workstations, there is not much sense in continuing to test quickfinder.
>
> Thanks
>
>
>
> Scott Schaffer
> Network Admin
> Olive Waller Zinkhan & Waller LLP
>
>>>> On 18/04/2011 at 4:19 PM, in message <[email protected]>,
> Scott Schaffer<[email protected]> wrote:
> Hello.
>
> I am testing Quickfinder as a search solution in our office and have
> noticed some odd behaviour. I am running Quickfinder on OES 2 SP3 and
> indexing Netware 6.5 volumes. Indexes are being created and stored on the
> OES server without any errors that I can see.
>
> I have setup a few test documents to see how well it finds phrases. We
> have a mixture of pdf, docx, doc and wpd files.
>
> When I search for one of my test phrases, it will not always be found. If
> I search for a specific word or other phrase in the same doument, it finds
> the document.
>
> What I have noticed, is that in the description given for that doument on
> the results page, the earlier phrase (that was not found), is part of the
> description but has odd spacing in it. For example, the word testing
> showed as t est ing. If I search the index for that word with the odd
> spacing, it finds it.
>
> Something else I have noticed is that if I re-index the folder, the word
> testing will again come up but with possibly different spacing.
>
> Has anyone else seen this?
>
> Thanks
>
>
>
> Scott Schaffer
> Network Admin
> Olive Waller Zinkhan & Waller LLP
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.15 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iQIcBAEBAgAGBQJNrg/iAAoJEF+XTK08PnB5FNMP/0a6ucbs5QgOyzr+pBkars8J
z8OoSAC2ofk4Hmc/vfzMZexwSS48WqsnhchaoW9wwoZKyUFyOO55jfgQoe80MEqX
Vp99W1gwOB2tvq+RwbUm6PKIJfa2/BTPb3gv1iRS1Uf9fchOXdXe5y7uQbid0XXK
zRB7Dr9FxVeNG4xqquWRDZlTbKUCQfw2E6WBzX0UqZcWJcw9ye P8OJQNDV4ZFXGi
+vS3eTTkXGmytHBvyMXUhptHela6bUHuf0bWxf0mtnzknLolJH UbSH+JUJ4/eGhv
nBrLRvrCAh+0t/4/2AyqujwasHaqL25VahikFb/6eoHRvTlviVLLLZwK2/AOqBNW
lVZW6AaxuBRK9RnZTgSMJ2YiYia8ZkSUB+PAISLBqqAkAWJVEe FpPInbtvcNesK4
KexMkz/D5ZSefFUU0slON7m3Sl/ib0fgNPuw+Kcw4X3SiJZqKOt/xo2toAl6EVUv
kSq2vnUgvXbHootVFlSO/dck8R9ZK3lV7W2M6cNwgUOi/u9LybtoJK/0Wt93fTfq
679nZZdJGLxShnJ0GrHauFderx3ku7IL9TgqypQ+AS0LHRkPUE EVAl4TmSuJScJE
Q25+fLCwRzafmsd8Oqw44419EPcEPOvZUs5cO34CPJ9NOv3oFb 5s7MFNXrF3Pfn4
++PscXyBxNcI/XHjZRvF
=dR0v
-----END PGP SIGNATURE----- -
Does anybody know what the steps are in moving a database to a different volume?
We are running Zenworks 6.5 sp3 on a netware 6.5 sp3 server. I want to move the database to a different volume on the same server because of space limitations on the current volume. I don't want to lose the current db and create a new one.
Any help would be appreciated.
Thanks.John,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
I had help off of 2012 upgrade until now and it has come back to bite me
With either the GW8 SP3 client or the 2012 SP1 HP1 client, we are
getting interittent 8E14 errors when doing the following :
1. Open Doc
2. Edit the Doc
3. File / Save As
4. Save as a new document in the Library
This is occuring with Office 2003 Word docs
SteveMark - had read your posting from October and was not encouraged .... !!
This appears to be happening in both .doc (2003) and .docx (2010) files
- very intermittent
Did you open an S/R with Novell ?
Steve
MarkDissington wrote:
>
> Been there, and still there in fact. There should be a thread lurking
> that I started on the subject. It appears that GW thinks some docs are
> corrupt/wrong format (mismatched file extensions), even though you can
> open them fine, when you try to save them again it borks. We found
> this mainly in Excel, but could be everywhere, The only thing we've
> found to 'fix' it, is when you find a document with the problem
> follow the steps below (tweak depending upon office/openoffice
> version in use):
>
> 1. Check out and copy doc locally
> 2. Open doc from checked out copy
> 3. Make a change to the document so you can save it
> 4. Save as... and choose an OLDER office format, office 97/2k etc.
> 5. Check document back in
>
> You should now be able to open, edit and save the document with the
> DMS, if you've still got issues, check the document properties page
> and make sure the document extension doc/docx matches the format
> you've saved in.
>
> Not a fix, in fact a right royal PITA. But gets you access to the
> document you need.
>
> Mark. -
Is there a way to prevent outbound email from being sent? Both external and internal. Using GW8 SP3.
Inbound OK.
And if possible, can a message be generated to reply back to user?
txbertschj wrote:
> Is there a way to prevent outbound email from being sent? Both external and
> internal. Using GW8 SP3.
>
> Inbound OK.
>
> And if possible, can a message be generated to reply back to user?
You can prevent users from sending mail by using a little trick - you have to
set their "maximum message size" to 1k, and set the compose format to html.
It's virtually impossible these days to send messages smaller than that if html
is used (and as a practical matter a 1k message is pretty difficult in text as
well).
You will also want to set the access control for GWIA to prevent outbound
messages, so "devices" trying to use SMTP will also be stopped at the gateway.
Danita
Novell Knowledge Partner
Are you a GroupWise Power Administrator? Join our site.
http://www.caledonia.net/register
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below... -
GWIA doing DNS lookup for local address
Hello,
I am running GW8.0.2 on Netware 6.5sp8. I have a server that our recreation department uses to send out confirmation emails when a customer signs up for a class. The recreation server and the GWIA are on the same subnet.
Here's the problem: When the Rec server sends out the first email confirmation, it gets sent out successfully. Subsequent emails after that fail. After about twenty minutes the next email will go out OK again but subsequent emails will fail.
The verbose logs on the GWIA don't tell me much but the diagnostic logs show what looks like a reverse DNS lookup happening at the GWIA for my local IP address of 10.0.0.3 (the Rec server). This reverse DNS lookup fails (probably a timeout) and subsequent emails from this local Rec server get dropped by the GWIA without the DNS lookup.
DNS is being done by DNS proxy on Bordermanager 9.2. I've bypassed the Bordermanager DNS and the same thing happens. I've made entries for the local Rec server into a route.cfg file but the GWIA seems to want to ignore these entries and keeps doing the DNS lookup.
The wierdest part of the puzzle is that if I restart the proxy on the Bordermanager the next email will go out with, of course, subsequent emails failing. I've looked at the proxy dns cache and can't even find an entry for my Rec server.
Attached are the entries from the Diagnostic logs of the GWIA. Novell tech support has assured me that the GWIA and the BM are working fine. I am also having this problem with a scanner that scans then emails but all other email and Bordermanager are functioning fine. This server and scanner were not having this problem before upgrading to GW8.0.2.
I don't understand why GWIA is doing DNS lookups for a local address and I don't know what I can do to stop it. Any help would be greatly appreciated.
This is a successful transfer right after restarting the proxy: 10.0.0.3 is the Rec server, 10.0.0.130 is the GWIA and 10.0.0.1 is the Bordermanager.
16:04:13 D15 NgwResQuery(3.0.0.10.in-addr.arpa, 1, 12)
16:04:13 D15 Querying server (# 1) address = 10.0.0.1
16:04:13 D15 HEADER:
16:04:13 D15 opcode = QUERY, id = 17615, rcode = SERVFAIL, flags: qr aa rd
16:04:13 D15 query = 1, answer = 0, authority = 0, additional = 0
16:04:13 D15
16:04:13 D15 QUESTIONS:
16:04:13 D15 3.0.0.10.in-addr.arpa, type = PTR, class = IN
16:04:13 D15
16:04:13 D15 rcode = 2, ancount=0
16:04:13 D15 NgwResQuery failed
16:04:13 D15 DMN: MSG 2000909 Accepted connection: [10.0.0.3] ()
16:04:13 D15 Successful login with client/server access: 10.0.0.130:1677
16:04:13 D15 DMN: MSG 2000909 Receiving file: ECMAIL/SYS:\PROGRAMS\GRPWISE\WPGATE\GWIA\3RD\receive\df30 fad4.221
16:04:13 D15 DMN: MSG 2000909 SMTP session ended: [10.0.0.3] ()
This is an unsuccessful transfer:
16:06:08 D04 timeout
16:06:08 D04 NgwResQuery: send error
16:06:08 D04 NgwResQuery failed
16:06:08 D04 DMN: MSG 2000933 Accepted connection: [10.0.0.3] ()
16:06:08 D04 DMN: MSG 2000933 SMTP session ended: [10.0.0.3] ()
Then the successful email comes back into the system:
16:06:26 AA8 MSG 2000909 Processing inbound message: ECMAIL/SYS:\PROGRAMS\GRPWISE\WPGATE\GWIA\receive\DF30FAD4 .221
16:06:26 AA8 MSG 2000909 Sender: [email protected]
16:06:26 AA8 MSG 2000909 Recipient: [email protected]
16:06:26 AA8 MSG 2000909 Queuing to MTA
16:06:26 AA8 MSG 2000909 File: ECMAIL/SYS:\PROGRAMS\GRPWISE\WPGATE\GWIA\wpcsin\4\4daf048 2.8m1 Message Id: (4DAF66F2.B67:244:35687) Size: 163.3 KbThanks Massimo. I could have swore I already did that but when I did it again just to make sure it solved the problem. Appreciate the help. Have a good one.
Originally Posted by mrosen
On 02.05.2011 21:06, avanrav wrote:
>
> Hello,
>
> I am running GW8.0.2 on Netware 6.5sp8. I have a server that our
> recreation department uses to send out confirmation emails when a
> customer signs up for a class. The recreation server and the GWIA are on
> the same subnet.
>
> Here's the problem: When the Rec server sends out the first email
> confirmation, it gets sent out successfully. Subsequent emails after
> that fail. After about twenty minutes the next email will go out OK
> again but subsequent emails will fail.
>
> The verbose logs on the GWIA don't tell me much but the diagnostic logs
> show what looks like a reverse DNS lookup happening at the GWIA for my
> local IP address of 10.0.0.3 (the Rec server). This reverse DNS lookup
> fails (probably a timeout) and subsequent emails from this local Rec
> server get dropped by the GWIA without the DNS lookup.
>
> DNS is being done by DNS proxy on Bordermanager 9.2. I've bypassed the
> Bordermanager DNS and the same thing happens. I've made entries for the
> local Rec server into a route.cfg file but the GWIA seems to want to
> ignore these entries and keeps doing the DNS lookup.
>
> The wierdest part of the puzzle is that if I restart the proxy on the
> Bordermanager the next email will go out with, of course, subsequent
> emails failing. I've looked at the proxy dns cache and can't even find
> an entry for my Rec server.
The reverse DNS done by GWIA is normal, and can't be stopped or tricked.
That it fails in such odd ways must be a bug with the reverse DNS proxy
of Bordermanager though. Apparently on the second lookups, it doesn't
answer in a timely manner (the type of answer is irrelevant, just it
*has* to answer). Use a different, "real" DNS server for your GWIA.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
Untitled Document -
NTSCAN32.EXE: Please Insert Disk....
I have a Windows 2000, SP3 workstation running NetWare client 4.83
SP2.
Once the workstation boots up I get this message continuously:
NTSCAN32.EXE
The driver detected that the device \Device\Harddisk1\DR1 has its
write
cache enabled. Data corruption may occur.
The ZenWorks for Desktops 3 keeps trying to rescan the Iomega Zip
drive.
If there is no disk in the drive I get this message.
Does anyone know how to correct this issue aside from uninstalling the
remote management capabilities from the client?
I tried reinstalling the client but that didn't help.> I have a Windows 2000, SP3 workstation running NetWare client 4.83
SP2.
> Once the workstation boots up I get this message continuously:
>
> NTSCAN32.EXE
> The driver detected that the device \Device\Harddisk1\DR1 has its
write
> cache enabled. Data corruption may occur.
>
> The ZenWorks for Desktops 3 keeps trying to rescan the Iomega Zip
drive.
> If there is no disk in the drive I get this message.
>
> Does anyone know how to correct this issue aside from uninstalling
the
> remote management capabilities from the client?
>
> I tried reinstalling the client but that didn't help. -
(probably) The last GW8 Netware Server in NYC Query
i think GW8 on Netware is similar to an iPhone -- it just works! But now i'm being forced to migrate to gw2014 on Linux its about time. Environment: 40 users, 1 domain, 1 post office 1 gwia 1 webaccess. I had gwava 4 on this box but gwava has since been moved to their linux appliance.
Using Danita's Move guide (for GW2012) and some other internet sources like (http://www.slideshare.net/NOVL/migra...pwise-to-linux) I did the following in a isolated Test vm environment:
1) installed new suse sp3 server (+1 IP address)
2) ncp mounted to netware
3) dbcopy Domain and PO (tested 4 times with agents shutdown. average time 6h 2 min)
4) installed gw2014 on linux box
5) choose upgrade an existing domain
6) then, choose upgrade an existing PO
7) did not migrate any other agents
8) create new gwia
9) Issues with spinning wheel so upgraded to gw2014sp1
10) all good. one account with 20k emails works ok. As admin: I can add a new user, delete a user. Users can transfer mail between users MTA works -- no problem.
Q1: What problems should I be looking out for?
My production system will have gwava (192.168.1.4) on the frontend (appliance) pointing to the old gw8 server (192.168.1.5). When I unload the agents to perform the migration Gwava will hold incoming emails in a queue. The new linux will hold a temporary IP address (192.168.1.6) during the migration. Post migration I wish to change the linux box to the assume the gw8 IP so Gwava and the user clients can find it.
Q2: Is changing the linux server IP post setup okay? Will any certs be affected?
So, I'm thinking i should build this system with an incoming and outgoing GWIA. I'm also thinking about re-adding webaccess.
Q3: How exactly is this incoming and outgoing gwia gateways done? A secondary domain with another vIP on .5?
Q4: How about the new webaccess? A second secondary domain with another vIP on .5?
The final reason i'd like to change the linux IP post migration is that I also have datasychronizer and a blackberry BES thrown into the mix.
Q5: Any concerns now?
Thanks
BTW I Love my blackberryEBSR PARAMEDIC wrote:
> Using Danita's Move guide (for GW2012)
I hate to suggest such a thing, but we do have a specific guide for moving from
NetWare to GW2014, and it goes over a lot of gotchas! Sounds like you have
managed to get it working though, but I wanted to mention it in case someone who
doesn't have the 2012 guide thinks they need THAT one to upgrade to 2014 :-)
Q2: It's possible to change the IP address, but for me I would actually just
add the old address as a secondary. As you point out, the server certs would be
invalid. This isn't a HUGE issue on SLES, but honestly, if you add the
secondary IP address now, in the future if you ever need to bring up a
"temporary" server in a pinch, you can easily just "move" the GW IP address
there. The only possible downside to this is the GWIA. It will listen on the
secondary, so GWAVA will find it easily, but no matter what it listens on, it
"sends" on the primary. Thus, you might have to adjust outbound firewall rules
to allow sending by the new server.
Q3 - I think that's just a continuation of the discussion for Q2 above.
Q4 - webaccess no longer requires a domain. There is no WebAccess gateway any
longer. For that though, if the webaccess server moves to a different server,
you might need to open firewall ports between the GW server and webaccess (if
there is a firewall). WebAccess needs to have access to ports 7191, 8301 and
8400 on the GW server.
Hope that helps.
Danita
Novell Knowledge Partner
Are you a GroupWise Power Administrator? Join our site.
http://www.caledonia.net/register
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below... -
Transfer Trustees from Netware to OES2 SP3
Hi everbody,
with the last metamig, I saw, that saved data from trustee.nlm should be restored.
I saved on the original Netware Server with trustee save /R daten: daten:daten.txt.
But I was not able to restore to my OES 2 SP3, I got a lot of error, ie. invalid token.
The Volume Name is the same as on Netware. All data have the same path.
Can anybody tell me the correct syntax how to restore the trustees to oes?
Thanks for helping,
Regards from Austria,
ReinholdOriginally Posted by rsteini
Hi everbody,
with the last metamig, I saw, that saved data from trustee.nlm should be restored.
I saved on the original Netware Server with trustee save /R daten: daten:daten.txt.
But I was not able to restore to my OES 2 SP3, I got a lot of error, ie. invalid token.
The Volume Name is the same as on Netware. All data have the same path.
Can anybody tell me the correct syntax how to restore the trustees to oes?
Thanks for helping,
Regards from Austria,
Reinhold
I don't believe (I could be wrong) that you can take the trustee.nlm and save the output in a format that OES Linux will understand (the OES LInux uses a .xml format which I think is different)
You could manually read through the file (that NetWare generates) and figure out if you wanted to manually reassign them
Or you could use the miggui (migration utility) on OES Linux to migrate the data (and trustees) from NetWare. -
IManager Plugins for BorderManager 3.7 sp3 and NetWare 6.5
Hello out there. Does anyone know if there are iManager 2.02 plugins for
BorderManager 3.7 sp3? Bordermanager is running on a Netware 5.1 server,
and iManager 2.02 is running on NetWare 6.5. Would like to manage the
filters thru iManager. Where could I get them? Thanks.In article <WmWfh.14463$[email protected]>, wrote:
> How
> do install the workstation version of iManager for NetWare 5.1? I could
> not find any documentation on this. Thanks.
If you download an eval version of BM 3.8, you should find a
documents/craig johnson directory on the OS CD. There is a lite version
of my BMgr 3.x book in there, and the last chapter talks about using
iManager. There is a Windows version of iManager on the companion CD that
you can install on a PC.
As far as the snapins are concerned, I am pretty sure they are buried on
the 3.7 CD's, but in any case they are only going to allow you to work on
filtering. You can simply use FILTCFG on the server to do all your
filtering work without iManager.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com *** -
Netware 6.5 SP8 to OES2 SP3 Migration Error with migfiles
Hi,
at first. We would like to abuse the migfiles tool to mirror data from Netware to OES2 SP3 with trustees !! Do you know a better tool than migfiles, please let me know. Its very important for me to use a CLI Command tool like migfiles, because it should run automatically.
We want to mirror data from a Netware 6.5 SP8 NSS Volume to a OES2 SP3 NSS Volume with trustess. The first migration with following line works without any error:
migfiles -s IPAddress -V Daten -x /media/nss/D4/Test3/ -i
From this point we need the -sync parameter to keep the data current.
I use this:
migfiles -s IPAddress -V Daten -x /media/nss/D4/Test3/ -i --sync "22-07-2011 16:26"
But then i became this errors:
Error: nbackup: Failed to restore: DATEN:VOLDATA.TDF
Error: nbackup: Received error: 0xfffdffdc ((libtsafs.so 6.50.0 291) An invalid path was used.) from NWSMTSWriteDataSet
Error: nbackup: Failed to restore: DATEN:tsa5up24/NWTAPE/
Error: nbackup: Received error: 0xfffdffdc ((libtsafs.so 6.50.0 291) An invalid path was used.) from NWSMTSWriteDataSet
Error: nbackup: Failed to restore: DATEN:tsa5up24/NWTAPE/NWTAPE.CDM
Fatal: Failed to restore data. Could not find destination path. If the destination path is a cluster resource, then check whether the resource is moved.
Fatal: nbackup: Received error: 0xfffdffe5 ((libtsafs.so 6.50.0 282) The data set handle is invalid.) from NWSMTSOpenDataSetForRestore
When the Sync job is finished, no file which was changed on the Source was migrated to the destination.
For your information. With the Novell Migration Tools (GUI) i have the same error. But with the Windows version "Novell Server Consolidation and Migration Toolkit" it works without any errors. But its a GUI tool without the possibility to run it automatically.
Any ideas
Thanks AndreasHi,
thank you for your reply. This is the log:
D, [01-08-2011 14:33:07#4872] DEBUG -- migfiles: migfiles command started at 01-08-11 14:33:07
D, [01-08-2011 14:33:07#4872] DEBUG -- migfiles: migfiles command executed as: /opt/novell/migration/sbin/migfiles -s xxx.xxx.xxx.103 -V Daten -x /media/nss/D4/Test3/ -i --sync 22-07-2011 16:26 --debug
D, [01-08-2011 14:33:07#4872] DEBUG -- migfiles: Calling function getCredentialDetails
D, [01-08-2011 14:33:21#4872] DEBUG -- migfiles: Successfully taken credential Details of source and destination server from user
D, [01-08-2011 14:33:21#4872] DEBUG -- migfiles: nbackup command executed as LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/nbackup -U "admin.havas" -R xxx.xxx.xxx.103 --list-tsa-version
D, [01-08-2011 14:33:21#4872] DEBUG -- migfiles: Major version of source tsafs is 3
D, [01-08-2011 14:33:21#4872] DEBUG -- migfiles: Minor version of source tsafs is 1
D, [01-08-2011 14:33:21#4872] DEBUG -- migfiles: ncpshell command executed as /opt/novell/ncpserv/sbin/ncpshell --ip=xxx.xxx.xxx.103 --u="admin.havas" --vinfo --parm1="Daten"
I, [01-08-2011 14:33:22#4872] INFO -- migfiles: Given destination path is NSS
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Source path is Daten:
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Destination path is /media/nss/D4/Test3/
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Successfully returned from function verifyAndFixSrcPath
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Destination volume type: NSS
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Calling function get_nss_vol_and_mnt_point_from_path
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Calling function is_compression_enabled
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Started on: "1-8-2011 14:33:22"
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: smstool cmd = LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/smstool --srcuser ".admin.havas" --destuser "root" -R xxx.xxx.xxx.103 --sync-time "22-07-2011 16:26" --output-file /tmp/smstoolOutFile.4872 --finddiff "Daten: /media/nss/D4/Test3/" 2>&1
I, [01-08-2011 14:33:23#4872] INFO -- migfiles: Generating list of files and folders to be synced
D, [01-08-2011 14:33:23#4872] DEBUG -- migfiles: Executing nbackup command from syncfiles: LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/nbackup -cF --disable-caching -U ".admin.havas" --expand-compressed-data -R xxx.xxx.xxx.103 -T /tmp/smstoolOutFile.4872 | LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/nbackup -xvF -U "root" -r "Daten: /media/nss/D4/Test3/"
D, [01-08-2011 14:33:23#4872] DEBUG -- migfiles: nbackup cmd = LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/nbackup -cF --disable-caching -U ".admin.havas" --expand-compressed-data -R xxx.xxx.xxx.103 -T /tmp/smstoolOutFile.4872 | LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/nbackup -xvF -U "root" -r "Daten: /media/nss/D4/Test3/"
D, [01-08-2011 14:33:23#4872] DEBUG -- migfiles: Calling function doCmd
D, [01-08-2011 14:33:25#4872] DEBUG -- migfiles: Checkpoined at
D, [01-08-2011 14:33:25#4872] DEBUG -- migfiles: Checkpoined pair 0
E, [01-08-2011 14:33:25#4872] ERROR -- migfiles: nbackup: Failed to restore: DATEN:VOLDATA.TDF
E, [01-08-2011 14:33:25#4872] ERROR -- migfiles: nbackup: Received error: 0xfffdffdc ((libtsafs.so 6.50.0 291) An invalid path was used.) from NWSMTSWriteDataSet
E, [01-08-2011 14:33:25#4872] ERROR -- migfiles: nbackup: Failed to restore: DATEN:tsa5up24/NWTAPE/
E, [01-08-2011 14:33:25#4872] ERROR -- migfiles: nbackup: Received error: 0xfffdffdc ((libtsafs.so 6.50.0 291) An invalid path was used.) from NWSMTSWriteDataSet
E, [01-08-2011 14:33:25#4872] ERROR -- migfiles: nbackup: Failed to restore: DATEN:tsa5up24/NWTAPE/NWTAPE.CDM
F, [01-08-2011 14:33:25#4872] FATAL -- migfiles: Failed to restore data. Could not find destination path. If the destination path is a cluster resource, then check whether the resource is moved.
F, [01-08-2011 14:33:25#4872] FATAL -- migfiles: nbackup: Received error: 0xfffdffe5 ((libtsafs.so 6.50.0 282) The data set handle is invalid.) from NWSMTSOpenDataSetForRestore
Thank you
Andreas
Maybe you are looking for
-
Cancel (reverse) Return Order, PGR not possible due to storage bin in 904
Hi gurus hope someone can explain in detail with transaction what am I missing since I'm MM guy and dont know very well SD transactions but here's my scenario, There is a return order with a delivery (1110500002), then PGI (651), this drive me to pro
-
Hey We have a very complex program that I am not allowed to show. I created a smaller project just to clear the problem. I attached the project so we can discus it. Before doing anything please read the text and follow the procedure below. The main.v
-
I have picked up an audio file that I can't control other than reduce the volume. I don't know how to turn it off and it plays over any other audio.
-
WebDav - WebFolder can't be accessed from Windows Explorer
Hi, I moved out UCM 10.1.3.5.1 from old servers to new servers. Application servers left on the same architecture - linux and web server left on IIS but we moved from IIS 6 to IIS 7.5. Currentlty everything is fine, windows native authentication work
-
Hi all, I have a series of around 8,000 photos from my recent trip to Botswana. They were taken on a variety of cameras, 30D and 40D mostly, a borrowed 1DS MkIII for around 5 mins. Some of the 30D files have jumped from like MG0950.cr2 to MG5020.cr2