GWcheck on document libraries
Earlier this year we migrated/upgraded our GW7 (NetWare 6.5) system to GW8 (SLES) and there were a few issues that we didn't pick up until a week or 2 later. Most of these have been fixed up now, but we have a few issues with our document libraries.
One of the issues we had was that DBCOPY did not copy all of the blob files (for emails and documents) across to the new server, I have been able to get the email blobs copied across and that is all working fine now.
The documents are a little different... When we did the migration we re-created the dmsh.db file and I suspect that at this stage something has gone wrong. The DBCOPY was done over 3 days with 2 passes over the data. After the migration every document created/modified after the first pass appears to have been lost. The activity log in the doc profile shows the last time it was worked on as the date before the first pass, but the document was definitely worked on the day before the 2nd pass. (ie 1st pass 19th, doc worked on 20th, 2nd pass 21st, doc profile shows the last date the doc was opened pre 19th - all changes to docs or docs created on 20th or 21st have gone). When we check the location that the profile says the document is saved in there is no blob file for it, but this would make sense as the document has been worked on and saved to a different folder, which is almost impossible to tell which folder it has been saved to. (Correct?)
When GWCheck is run on our libraries with the "Verify document files" option they are reporting Problem 86 (Inaccessible wordlist blob) and Problem 76 (Error accessing document content).
I have run the GWcheck on one of our smaller libraries with the "Reset word lists" option ticked and this has made no difference to the errors. I note that there is an option to "Fix document/version/element", can someone explain what this does? Are we able to run this option and it will find the new location of the blob based on the doc profile/database? (presuming the actual blob file is on the new server)
Are there any options I can put in the MISC tab that will find the missing blobs and restore the connection to the documents?
Hopefully someone has an answer for me so the year will end on a high....
Let me know if any of the above doesn't make sense.
Thanks in advance
Matt
Further to this, some documents that were created back in 2010 and presumably not touched since then are also reporting Problem 86 (Inaccessible wordlist blob) and Problem 76 (Error accessing document content) errors.
GWCheck with the "Verify document files" reports file location as \\oldserver...\fd94\4aa1413e.000.
GW doc properties activity log file reports location \\oldserver...\fd2c\4bcddad2.000 (dated 20/4/2010)
Similar Messages
-
Hi Guys,
On the home page of each sub site I would like to be able to show a list of subsites and Document libraries that are under the current subsite.
I started investigating a solution using Datasources with SOAP requests sent to the server but it is very difficult to understand how to surface it on the Data View WebPart.
I have tried with the search results webpart but the problem is that it does not work well when packaged in a Site Template.
Please advise.
Thanks and Regards,
RhyanOk,
Here is the problem:
When creating a mysite from powershell or script, apparently you can ONLY do this from a wfe (or a server running Microsoft SharePoint Foundation Web Application in services on server).
You CANNOT create mysites from script on your appserver if it is not also a Web Application Server. I confirmed the same is true in my test farm. I guess I was always running most of these scripts on the webserver.
I searched all over and cannot find this documented anywhere.
Who do I contact to have Microsoft document this?
It's Thursday morning, I've been working non stop since Saturday morning so you don't have to :) -
I performed an inplace upgrade on my sharepoint 2007 installation and post the upgrade while trying to browse the document libraries on the site i get the following Error. HAs anyone encountered a similair error?? What could be the cause and resolution
for this
Any pointers/solution appreciated.
Description: An
unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception
Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source
Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack
Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Microsoft.SharePoint.WebPartPages.ListViewWebPart.PrepareContentTypeFilter(SPList list, Hashtable[] excludedTransformers) +682
Microsoft.SharePoint.WebPartPages.ListViewWebPart.GenerateDocConvScriptBlock(SPWeb web, SPList list) +482
Microsoft.SharePoint.WebPartPages.XsltListViewWebPart.OnPreRender(EventArgs e) +571
Microsoft.SharePoint.WebPartPages.WebPartMobileAdapter.OnPreRender(EventArgs e) +78
System.Web.UI.Control.PreRenderRecursiveInternal() +11032094
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3393
Version
Information: Microsoft .NET Framework Version:2.0.50727.4952; ASP.NET Version:2.0.50727.4955
My SharePoint Blog
http://dhireny.blogspot.comHow to be in my case??
[NullReferenceException: Object reference not set to an instance of an object.]
Microsoft.SharePoint.WebPartPages.ListViewWebPart.PrepareContentTypeFilter(SPList list, Hashtable[] excludedTransformers) +694
Microsoft.SharePoint.WebPartPages.ListViewWebPart.GenerateDocConvScriptBlock(SPWeb web, SPList list) +482
Microsoft.SharePoint.WebPartPages.XsltListViewWebPart.OnPreRender(EventArgs e) +571
Microsoft.SharePoint.WebPartPages.WebPartMobileAdapter.OnPreRender(EventArgs e) +78
System.Web.UI.Control.PreRenderRecursiveInternal() +11141054
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Control.PreRenderRecursiveInternal() +223
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3393 -
Display data from multiple document Libraries in List View Webpart
Hi All,
I want to display data from multiple document libraries into one list view webpart(custom i have created)
I went through the following link http://blogs.msdn.com/b/ramg/archive/2009/04/22/implementing-a-simple-cross-site-collection-list-view-webpart.aspx
but it tells to display only from one document library.
My motive behind displaying data in the list view webpart is to achieve the functionality of Check In ,Check Out and other OOB features.
With Regards,
Jaskaran SinghHi,
As there is no such OOTB feature, a workaround is to create a visual web part to gather items from libraries and implement functionalities like Check in, Check out files
in different libraries.
The links below will provide more details:
Create Visual Web Parts in SharePoint
2010
A demo about displaying list items in visual web part:
http://www.dotnetcodesg.com/Article/UploadFile/2/217/Web%20Part%20in%20SharePoint%20To%20Show%20All%20List%20and%20List%20Items.aspx
About the Check In and Check Out:
How to Check In a document programmatically
SPFile.CheckIn method
and SPFile.CheckOut method
Best regards
Patrick Liang
TechNet Community Support -
On a single Windows 2012 R2 server I have installed SQL 2012 and SharePoint 2013 SP1 with the latest update roll ups. When I remote desktop to the server using the farm and site collection admin account and open page http://server_name_here using
Internet Explorer, I'm able to see newsfeeds and document libraries.
If I connected to a separate Windows 7 machine as the farm and site collection admin account and open page http://server_name_here using Internet Explorer, I'm able to view the SharePoint pages except I cannot see any newsfeeds or document libraries.
There's just blank space where they should be. I have repeated this process on several other machines that are not the server and get the same result on every machine (I've tried other servers, desktops, adding the SharePoint site to the trusted sites list
in IE, even using firefox). I'm using the same account as I did when I logged onto the server directly. Any thoughts as to what's going on?
Thanks!Thanks for the idea, Harsh. What am I looking for?
It is currently set to the default of http://server_name and http://server_name:port_number (the latter is for Central Admin).
When I have access to the server, I have always done so the same way, using http://server_name. This was true when I access it from the desktop of the server itself and when I tried to access it from other desktops and servers (the machines where I had the
issues with the libraries and feeds not showing up). Are there other values I should add?
I have not tried to add http://server_FQDN as we don't plan on using that to access it but if you think it will help I would be happy to add it. -
Users are unable to synchronize document libraries with OneDrive for Business
Hello,
We are having an issue with our users attempting to synchronize document libraries with OneDrive for Business. When a user tried to synchronize the document library either via the "SYNC" button on the document library page using IE or by
manually entering the document libraries path into the OneDrive for Business desktop app they receive the following error
"We can't connect to the specified SharePoint site". The users have the Edit permission to both the site and the document library. I have performed the following actions in attempt to get the synchronization to work.
1. Tested giving user the owner permission to the site and document library. same result.
2. Performed a repair on the users Office 2013 installation.
An interesting point to note is that I myself am able to synchronize the document libraries using both the "SYNC" button on the document library site and by entering the path manually in the desktop app. Difference between my account and the test
accounts is that I'm a site collection administrator and farm administrator. Can anyone shed some light onto this issue?Hi Corey,
According to your description, my understanding is that the users cannot sync document libraries with OneDrive for Business.
I recommend to check the Permission Level to see if the Use Client Integration Features permission is selected.
If not, check this permission in the corresponding permission level which is granted to the users.
Please also check if the users have the right permission to sync the document library with OneDrive for Business.
More reference:
http://nheylen.wordpress.com/2014/05/15/sync-error-we-cant-connect-to-the-specified-sharepoint-site/
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Hi there,
How to add this custom button on all Library Types (Not just document libraries)?
RegistrationId="101" RegistrationType="List" adds this button to Document Libraries only - which does not work for me.
Thanks so much.Hi,
According to your post, my understanding is that you wanted to add a custom button on the ribbon of all the library.
You can refer to the following code snippet, it would add a custom button “Site Settings” on the ribbon of all the libraries.
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<CustomAction Id="ListViewCustomization" Location="CommandUI.Ribbon.ListView" RegistrationId="101" RegistrationType="List" Title="List View Ribbon Customization">
<CommandUIExtension>
<CommandUIDefinitions>
<CommandUIDefinition Location="Ribbon.Documents.Share.Controls._children">
<Button Id="ListViewButton" Command="ListViewButtonCommand" Description="Go to Settings" LabelText="Site Settings" TemplateAlias="o2" Sequence="93"/>
</CommandUIDefinition>
</CommandUIDefinitions>
<CommandUIHandlers>
<CommandUIHandler Command="ListViewButtonCommand" CommandAction="/_layouts/settings.aspx" />
</CommandUIHandlers>
</CommandUIExtension>
</CustomAction>
</Elements>
More reference: http://msdn.microsoft.com/en-us/library/ms473643.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Hi,
I am creating a batch job in C# and my requirement is as follows.
My Requirement is to create multiple document libraries and after breaking inheritance I remove all the groups which that library inherits and add some groups which are created for that library.Initially when libraries are less the creation
of library is good but once it gets increased ,system takes lot of time.I will have to create around 2000 libraries and almost 600-700 groups.
Q.1 ) What would be my approach?
Q.2) Do we have powershell command which can break inheritance and delete all the default groups in a one go (without looping) of a library?
Please suggests.Hi,
It is recommended to create timer job for the time consuming job when in SharePoint environment.
About creating timer job:
http://www.codeproject.com/Tips/634208/Create-and-Deploy-Custom-Timer-Job-Definition-in-S
If you want to do it via PowerShell, the links below would be helpful.
About how to stop inheriting permission for SharePoint list and give custom permission using PowerShell:
http://www.sharepointlovers.com/sharepoint-powershell-command-to-stop-inheriting-permission-for-sharepoint-list-and-give-custom-permission/
About How to remove users and groups from a SharePoint list using PowerShell:
https://sharepointthinking.wordpress.com/2012/10/01/how-to-remove-users-and-groups-from-a-sharepoint-list-using-powershell/
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Document panel not opening in Office due to error in new document libraries
Hi,
all our new document libraries have the same issues when opening office documents with standard document panel.
The form contains schema validation errors.
Content for element 'documentManagement' is incomplete according to the DTD/Schema.
Expecting: {fa742bdc-a2be-4b36-877c-a90d9817da44}_dlc_DocIdPersistId.
It is a standard sharepoint info path form, no custom form? What can be the issue?
regards
MartinI have been seeing the same thing. I can go to library settings and change the advanced setting to "Open in the browser" and the document panel opens fine after clicking "edit in Word". If it is set to "Open in the client
application", then the same error you state above is given.
Our environment is SharePoint 2013/O365. -
Iterate Through Lists Instead of Document Libraries, Or both
System Info: SharePoint 2010 Enterprise w DEC 2013 CU. 2 WFEs (load balanced), App Server, SSRS Server, Dedicated CA Server (All running Win 2k8 R2).
Background:I have a large (5,000 user) application that is completely customized on top of SP2010. I am the admin, and have been on the team for many years. Previously, we had a development team,
but client has scaled costs back, and now its just me on the technical side. We have a Web app that houses multiple Site Collections, and each site collection has various subsites.
My Problem: We have increased the LVT to 10k items (system has plenty of HP, although we do see performance degradation). Each subsite in the Site Collection holds data specific to an organization
wtihin the Line of Business. There are two lists that frequently approach the 10k mark, and we have mitigation steps in place (essentially, we just create a new SubSite for them once they reach 10k). What I need is a single script that will traverse ALL subsites
and return a count of their lists, perhaps I can work a couple of if statements in there to have specific data written to a SP List (if count is greater than 5000), and other wise everything gets written to the output file.
I am trying to iterate through all lists and return a count of folders + items ... The script below works just fine, but it goes through Document Libraries only (per the baseType eq tag).
I've tried changing baseType from DocumentLibrary to GenericList, but I continually get an error.
I've also removed the where baseType = DocLib clause completely, and this has the desired results (all lists and doclibs are listed), except the 'WebUrl' field in the csv output is blank.
Any thoughts on how I can make a small tweak to this script to get my desired results?
Start-SPAssignment -Global
$OutputFile ="D:\folder\DocCount3.csv"
$results = @()
$webApps = Get-SPWebApplication http://WebAppURL
foreach($webApp in $webApps)
foreach($siteColl in $webApp.Sites)
foreach($web in $siteColl.AllWebs)
$webUrl = $web.url
$docLibs = $web.Lists | Where-Object {$_.baseType -eq "DocumentLibrary"}
$docLibs | Add-Member -MemberType ScriptProperty -Name WebUrl -Value {$webUrl}
$results += ($docLibs | Select-Object -Property WebUrl, Title, ItemCount)
$results | Export-Csv -Path $OutputFile -NoTypeInformation
Stop-SPAssignment –GlobalYou guys won't believe this ... But, the script actually works as intended if I change the baseType tag to "GenericList"... I had been getting errors (about 14 of them) through PowerShell and
assuming the script didn't process, but after looking at the output CSV, it seems that everything worked properly. I think the 14 errors MAY have been corrupted sites (or something?) as it gives me NullValueNotAllowed when trying to "Add-Member" and points
to $WebUrl as being null.
Next up -- working on getting this script to write specific objects to a SP list! -
Hello
I wantto rename content type on web site level and underneath all the document libraries using powershell, please let me know how can do this?
I saw this url
http://suryapulipati.blogspot.in/2011/08/rename-content-type-name-in-list-using.html, but I want to change everything from Web Site, subsite and underneath document libraries. Because if you try to change on any on document library, it will be applicable
for that document library, if you change on web level then underneath document libraries content type names not updated automatically.
Please advise
AviNot sure with powershell.
I could help you out with Server Side or Web Services though.
Brandon James SharePoint Developer/Administrator -
How do I combine a number of document libraries into one heading?
Please can anyone help me. I have a number of SharePoint Document Libraries which I want to move to one area (each document library is a project and when the project closes I want to be able to show this under one view 'Closed Projects'). HOw can I
do this?
Currently, on the Navigation pane on the left hand side of the screen we have a heading 'Closed Projects' and all the document libraries sit under that heading but this takes up a lot of room and as we could end up with hundreds of closed projects, I'd like
to just keep the heading 'Closed Projects' and then when you click on that heading it takes you into a page which shows all the closed projects (preferably sorted in some way by name or date closed) document libraries. Is this possible & how?
We are using SharePoint 2007.
ThanksHi KeoKira,
What you might be able to do is set up and maintain a separate list of projects, with a choice column indicating whether the project is open or closed, and a hyperlink column linking to the relevant document library.
Then for your closed projects page, you can just link to a list view of the projects list that is filtered to only show links to closed projects. -
Some of the document libraries I am using need to have publishing enabled and some do not. But the query (for most recently updated documents in the site) shouldn't let the user check-out any documents (only see them in read-only mode).
Hi,
Is the query in search? Could you provide a screen shot about it ?
Did users click view library button to check out document? Could you provide more details about it?
Thanks,
Dean Wang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Most user friendly way to browse document libraries for saving documents
We are trying to figure out the most user friendly way to save office documents to different site collection document libraries. The locations appear fine when we click "save as" for recent folders. We can even click browse and use
the up arrow for getting closer to the root path of the site. This works fine, but there is not an easy way navigate to a different site collection. Sure, I can copy/paste the web address in the file path, but I think that is asking too much for
basic end users. Is there a different approach I am not aware of?
Thanks,How about Link a library to the Windows Favorites Folder, the use favorite to save document.
https://www.youtube.com/watch?v=VJeRX-h7Hjw
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply. -
Duplicate columns created in Document Libraries
Hi,
We are having issues with duplicate columns being created in document libraries after copying/moving documents between libraries (SharePoint 2013):
Unable to find any users with similar issues on forum
Thanks in advance
KDuplication has been sort of a thing for us as well. On our SP public site images will start duplicating themselves. I am not sure if it's because of different libraries running in the background, but it is very annoying.
I'm not sure if these two cases are connected, but I thought I'd post so you knew you weren't alone in this strange behavior.
Maybe you are looking for
-
Fonts for printing - unicode or non-unicode
Hi, How could i find whether the fonts am using for scripts and smartforms are unicode compatible or not. Regards, Vijayalakshmi
-
Only one bean is allowed!!!! but how???
hi@all i got a little problem, in my program, i want only ONE instance of backing bean to be generated, how to realize that? I dont think this is a big and hard question, so give me some hints, i will really really appreciate it !!! waiting, waiting,
-
Drives do not meet the requirements for Safari 4.0.5
I have an original Power MAc G5 with daul 2 GHz processor running 10.5.8. I am currently running Safari 4.0.3 and would like to upgrade to 4.0.5, but the installation package stated that none of my drives meet the requirements for installation. What
-
where do I go to find the size of a slideshow in aperture so I know what size USB to export it to?
-
Vista serial number question!
I got a new the A100-049 with vista installed but i wasn't happy with it and i uninstalled vista to get XP back today but i find out that since i have two hard drives i can have vista installed as well. I go to install vista and asks me for the seria