GWIA.ncf each line tries to load like a file

I am not aware of any changes made to our system but this issue started 5 days ago.
When I type in gwia on the system console every line from the gwia.ncf file displays as
SERVER -5.70-151: Unable to find load file DOMAINPATH=\Novell...
Any thoughts on what is causing this.
Thanx,

Originally Posted by Bob-O-Rama
Why? Because someone overwrite your gwia.ncf with gwia.cfg ?
Who knows.... Look at the contents of the .ncf and see whats actually in it. Post it here ( sans any passwords or other incriminating facts ) and we can take a look.
-- Bob
Here is the gwia.ncf
# search add SYS:\system
load SYS:\system\gwia @gwia.cfg
[GroupWise]
SystemCreate=No
SystemUpdate=Yes
Platform=Netware
LaunchAgents=Yes
LaunchAgentsProtected=Yes
LaunchGWIA=Yes
LaunchGWIAProtected=Yes
[Components]
Admin=Yes
Agents=Yes
GWIA=Yes
[Admin]
InstallAdmin=Yes
InstallSDD=Yes
ConsoleOnePath=Z:\
SDDPath=z:\grpwise\software
[SoftwareDistributionDirectory]
ConsoleOneSnapins=Yes
NetWareAgents=Yes
WindowsAgents=Yes
WebAccess=Yes
CalendarPublishingHost=Yes
InternetAgent=Yes
Monitor=Yes
WindowsClient=Yes
[SystemCreation]
Username=crfuchs
Context=Tech.HQ.ati
ServerAddress=192.168.1.2
DirectLink=No
POAAddressIP=Yes
POAClientPort=1677
POAMessagePort=7101
POAHTTPPort=7181
MTAAddressIP=Yes
MTAMessagePort=7100
MTAHTTPPort=7180
PrimaryDomainPath=\\Novell\
[Agents]
InstallOnly=No
NetwarePath=z:\system
Cluster=No
UpdateAutoexec=Yes
[AgentsLanguages]
English=Yes
French=No
German=No
Portuguese=No
Spanish=No
[ClientLanguages]
English=Yes
French=No
German=No
Portuguese=No
Spanish=No
Arabic=No
ChineseTraditional=No
ChineseSimplified=No
Czech=No
Danish=No
Dutch=No
Finnish=No
Hebrew=No
Hungarian=No
Italian=No
Japanese=No
Korean=No
Norwegian=No
Polish=No
Russian=No
Swedish=No
[Domain/PostOffice 1]
Domain=Yes
Name=ATI-DOM
DBPath=\\Novell\
[Domain/PostOffice 2]
Domain=No
Name=ATI-PO
DBPath=\\Novell\
[GWIA]
InstallOnly=No
NetwarePath=z:\system
UpdateAutoexec=Yes
Cluster=No
IPAddress=19
AddressIP=Yes
#Port=7100
WebConsole=No
HTTPPort=9850
UseRelayHost=No
DomainPath=\\Novell\SYS\
GWIADir=GWIA
ObjectName=GWIA
MailDomain=ati-ae.com
EnterConsoleOne=No
Thanx much

Similar Messages

When I tried to load some mp3 files on to my samsung brightside I looked under card memory and my songs were there but when I clicked on my music it said no memory available remove files and I have an 8 gb micro sd card in and there is nothing else on it

When I tried to load some mp3 files on to my samsung brightside I looked under card memory and my songs were there but when I clicked on my music it said no memory available remove files and I have an 8 gb micro sd card in and there is nothing else on it

Whew.... got it to work after days of trying to figure.
Got answer here: http://forums.macrumors.com/showthread.php?t=1450821 from zblaze.
Wiped phone completely, restored as NEW iphone through itunes. Checked 'Sync all Music'.
After that happens you can restore from backup.

Problem with Loader, trying to load multiple png files, error 1069 on the contentLoaderInfo

Hi helpers !@
im trying to load multiple external png files from a folder. the path for the images comes from an xml attribute and i got no problem with the path. The error message pops on when i try to add the loader into an array for later use and then when im done remove each child i created. There is something in my pratice that is not ok , i meen i know im wrong with at some point ! Duh theres an Error message for each loader i create .. .
ReferenceError: Error #1069: Property Loader not found on flash.display.LoaderInfo and there is no default value.
here some code , pls guide me !
function affichageM(){
var nodeM:XML;
for each ( nodeM in listeM ){
   var reqM:String = localLogoM + nodeM.attribute("icon_max2");
   var imageLoaderJ = new Loader();
   imageLoaderJ.contentLoaderInfo.addEventListener(Event.INIT,addM);
   imageLoaderJ.load(new URLRequest(reqM));
     // just counting for fun
   iNodeM ++;
function addM(e:Event){
try { var l_img:Loader = Loader(e.currentTarget.Loader);
       l_img.name = "imageLoaderJ" + mc_ArrayImg.length().toString() ;
       l_img.visible = false;
       mc_ArrayImg.push(l_img);
       mc_Jour.addChild(l_img);
         //calling the fucntion that will animate all img in the array and had some text to them.....
      drawMyImg(mc_ArrayMImg.length()-1);
catch (error:Error) {
       //just counting errors for fun
      iErreurM++;
        var errorMessage:TextField = new TextField();
        errorMessage.autoSize = TextFieldAutoSize.LEFT;
        errorMessage.textColor = 0xFF0000;
        errorMessage.text = error.message + " " + mc_Jour.numChildren + " " + mc_ArrayImg.length;
        errorMessage.x = 10*iErreurM;
        addChild(errorMessage);
        return;

Hi, I'm not sure you are on the correct forum. This is the Flash Player forum. When you first open your thread, look to your right "More like This" and perhaps one of those forums would be helpful. Perhaps the Flash forum?
Thanks,
eidnolb

Trying to load patterns, .pat files not showing

I am trying to load patterns, and when I click on Load Patterns..., none of my .pat files are showing. I only have one showing right now, and that is only because i did the following: I clicked the "Reset to Default" button, which brought up the default patterns. Once that was loaded, I reset that as the default and now that is the only .pat file that shows. If I go to the preset folder in CS5, I can see the list of .pat files, yet they won't show up when I try to load a new pattern folder.
Any help is appreciated. Just to show what I'm seeing, here is what I see trying to load a pattern from the presets/Patterns folder in CS5:
And here is that same folder opened in explorer:
thanks!

Yes, I've sort of found a solution. While they didn't show up in the folder, they DID show up in the flyout at the bottom. I could open a .pat (and this same thing happened with my brushes btw) at the bottom of the flyout menu, then once the brushes were opened, I could save the set of patterns/brushes as a new set, and after doing that, they show up when i try to load new brushes/patterns/etc.
Not sure if this is how things work normally, but I've been using photoshop for many years and don't remember that ever happening before. This is the first time I've tried to load patterns/brushes on this computer, so maybe it's a first time use thing.

Problems when trying to load a flat file

I am trying to preview a flat file which I am able to preview on an existing BW system but not on a replacement system (which is a 3.5 system). The structures are identical. The message that I get is below: The infoobject definition for 0CALMONTH is the same in both systems i.e.
Input: 6
Conversion routine: PERI6
Output length: 7
Can someone assist? Thanks
Error in conversion exit
CONVERSION_EXIT_PERI6_INPUT
Detailed message:
Error in conversion exit CONVERSION_EXIT_PERI6_INPUT
Message no. RSAR137
Diagnosis
An error occurred in record 1 during execution ofconversion exit CONVERSION_EXIT_PERI6_INPUT for field CALMONTH.
Procedure
Check that the record where the error occurred has the correct format, and correct it accordingly.

Hi Niten,
Goto the transfer rules -> Data str/tranger structure tab -> and check whether the 0CALMONTH has any conversion exit assigned. You can remove that and retry.
Bye
Dinesh

Errors when trying to load a flat file

When I try and load a flat file (I have also manually created a test .csv file with one record) I am able to load to PSA, but when I try and load to the Object I get the following error message (below), how can I fix this? Thanks
The test record is:
1460;MAMO;UK - Banbury;MAMO;Other;FCJ
Diagnosis
Data record 1 & with the key '1460MAMO &' is invalid in value 'Other &'
    of the attribute/characteristic WINVCAT &.
System response
The system has recognized that the value mentioned above is invalid, and
    has processed this general error message. A subsequent message may give
    you more information on the error. This message refers to the same
    value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in
    the PSA maintenance screens. If this message appears in the master data
    maintenance screens, leave the transaction and call it again. This allows you to maintain your master data.

Hi
GO to Transaction RSKC and check whether & available or not,if it is not there please enter & value and execute.
and also go to the psa and change record(delete the gap before & and save and reload it...
Thanks
Teja
Message was edited by: Teja badugu

Error when trying to load a flash file in to a dreamweaver document

Every time I try to add flash content to my html site in
dreamweaver (both version 8) I keep getting an error:
"While executing onClick in Object Options.htm, the following
javascript error occured:
at line 55 of file "C:\program
files\...\configuration\commands\object options.js":
cannot find the file C:\program
files\...\configuration\shared\common\cached\empty.htm.
At line 55 of file "C:\program
files\...\configuration\commands\object options.js":
getDocumentDOM: Argument number 1 is invalid.
Can anyone make any sense of this?
I'm fairly new to web development, and new to dreamweaver and
flash as a whole. Thank you in advance for any help!

Hi Ravens Fan,
Thanks again for your valuable input. I replaced the string manipulation functions with a path control. I think it works coz I can see the waveform data, rms values etc. And then you said if it works, do a Path to String on that...and I'm not exactly sure how to do that. I attached a snippet of the modified vi. you may refer the original vi snippet in my previous email.
I appreciate it if you could help me again.
Thanks.
Attachments:
read from spreadsheet2.png ‏283 KB

Trying to load a .vob file into iMovie11 but get an error message that the file format is not compatible

can quick time convert this file or do i need additional software?

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

I am trying to load an encore file and it quits responding at 20%

I force quit the program and try to restart it and the same thing has happend about 15 times.
What should I do now?

Can you create a new project?
Can you open any previous projects?
Is it a dynamic link project?
In any event, even though out of date, look here:
Troubleshoot system errors and freezes | Adobe software on Mac OS 10.x
http://kb2.adobe.com/cps/824/cpsid_82414.html
Try #1 and #4 first.

Can We Display Image on Hieararichal Report on Each Line item

Dear Gurus ,
I have a Strange Requirement from the Client . They want to display Image on each line item of report with regard to Material in Hierarchal Sequential Report . Is there any solution for the same .
Thanks in advance
regards
Shankar

I am having a path which is stored in SAP database which i have fetched in the reported in both alv heriarchal and also in Alv Grid . The Image is stored from DMS . Now what i am doing is i am trying to load a excel file from program BCALV_BDS_UPLOAD and when i run my report and go to view and select Microsoft Excel option the I am getting an error Bad file format .
The Path is : SAPR3://SAPR3CMS/get/200/DMS_5FC1/DE72B28A5B76F0F1AF0000215E54283E/FM1E1085XX18W-001E.jpg
Can you please help me out in this .
Regards
Shankar

Trying to load MP3 from desktop to AIR application

I'm trying to load an MP3 file into an Air application.
Here's some code. The first 2 lines are in my constructor
fileToOpen.browseForOpen("Open", [new FileFilter("MP3",
"*.mp3")]);
fileToOpen.addEventListener(Event.SELECT, fileSelected);
private function fileSelected(event:Event):void
var stream:FileStream = new FileStream();
trace(fileToOpen.nativePath);
// sound = new Sound(new URLRequest(fileToOpen.nativePath));
// trace(sound);
stream.open(event.target, FileMode.READ);
trace(stream.bytesAvailable);
sound = new Sound(stream.readBytes(stream.bytesAvailable));
channel = sound.play(00000);
addEventListener(Event.ENTER_FRAME, onEnterFrame);
Using URLRequest gives me the error Error #2044: Unhandled
IOErrorEvent:. text=Error #2032: Stream Error. I can't seem to load
a file when I give it the full path. Then with the file stream, I
don't even know what I'm doing. I don't know which method I'm
supposed to use to load the file into a sound object. Please
help...

I figured it out. I tried url instead of nativePath for the
file object and it worked.

Trying to load jar file dynamically

I'm trying to load the jar file dynamically and making the new instance of an objet present in it.
mu source code -
import java.net.*;
import java.util.*;
import java.io.*;
import java.lang.reflect.Method;
class A
/** The class loader to use for loading JMeter classes. */
private static URLClassLoader loader;
     static {
          System.out.println("classpath : " + System.getProperty("java.class.path"));
URL[] urls = new URL[1];
StringBuffer classpath = new StringBuffer();
File f = new File("E:\\try\\lib\\dom4j.jar");
          String s = f.getPath();
try
               urls[0] = new URL("file", "", s);
          catch (MalformedURLException e)
               e.printStackTrace();
System.setProperty(
"java.class.path",
System.getProperty("java.class.path") + System.getProperty("path.separator") + s);
loader = new URLClassLoader(urls);
* Prevent instantiation.
private A()
* The main program which actually runs JMeter.
* @param args the command line arguments
public static void main(String[] args) throws Exception
          System.out.println("java,class.path : " + System.getProperty("java.class.path"));
Thread.currentThread().setContextClassLoader(loader);
          System.out.println("loader : " + loader);
          System.out.println("java.class.path : " + System.getProperty("java.class.path"));
          System.out.println("classpath : " + System.getenv("classpath"));
try
Class B = loader.loadClass("B");
Object instance = B.newInstance();
Method startup =
B.getMethod("print");
startup.invoke(instance);
catch (Exception e)
e.printStackTrace();
import org.dom4j.*;
import org.dom4j.dom.*;
import java.lang.reflect.*;
class B
     public void print () throws Exception
          //Element e = DocumentHelper.createElement("hello");
          //e.addText("sachin");
          //System.out.println(e.asXML());
ClassLoader loader = Thread.currentThread().getContextClassLoader();
          System.out.println("loader : " + loader);
Class c = loader.loadClass("org.dom4j.dom.DOMElement");
          //Class c = Class.forName("org.dom4j.dom.DOMElement");
          Constructor con = c.getConstructor(new String().getClass());
          DOMElement el = (DOMElement)con.newInstance(new String("asd"));
          //DOMElement dm = new DOMElement("ADD");
          System.out.println(el);
the class org.dom4j.dom.DOMElement is present in the jar file .
basically i'm getting an exception, given below--
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorI
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodA
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at A.main(A.java:59)
Caused by: java.lang.NoClassDefFoundError: org/dom4j/dom/DOMElement
at B.print(B.java:18)
... 5 more
thanks alot..
Regards,
Sachin

Alright let me tell you guys what I am doing. I am using reflection to load the class from a jar file. Then, I am accessing a method defined in the class.
This piece of code will load and start the class;
Class c = loadClass(name);
System.out.println("name:" + name);
System.out.println("c:" + c);
Method m = c.getMethod("ServiceStarted", new Class[0]);
d1 = c.newInstance();
System.out.println("d1:" + d1);
m.setAccessible(true);
try {
m.invoke(d1, new Object[0] );
} catch (IllegalAccessException e) {
This piece of code will invoke a preloaded class;
String s = d1.getClass().getName();
Class c = Class.forName(s);
System.out.println(c);
Object ret = null;
Method m = c.getMethod("Hello", new Class[] { String.class });
Object d = c.newInstance();
m.setAccessible(true);
try {
ret = m.invoke(d, new Object[] { smsg });
} catch (IllegalAccessException e) {
and I have define d1 as;
private static Object d1 = new Object();
Any ideas why I am getting the exception.
Thanks,
MS

BI pulisher errors out when I tried to load xml in rtf template.

Hello,
Today I have installed bi publisher with .net framework.But when I tried to load the xml file after opening .rtf template it gives error "XSD parser returned an error"
Please let me know what could be the issue.
Thanks
Ganesh Mane

Hello,
--BI version : 10.1.3.2.0
--OS : WINXP
Did you run microsoft update program if yes then what patches you have updated?
-No. I just installed .net framework on my machine before installing this BI publisher.
Thanks
Ganesh
Thanks
Ravi

Internal Server Error when trying to load a movie

Before I visit a friend to solve a problem on her Mac (latest OS and QuickTime installs already done), perhaps you can offer tips on things to look for: Whenever she tries to load a movie file from the Web (either in Safari or directly in the QuickTime app), she gets a "500 Internal Server Error".
What should I be looking for?
Lots Mac OS X (10.4.5)

Try a different browser such as Firefox to determine if the problem is with the QuickTime Internet plug-ins and their related settings. (You might also bring with you a functional copy of the plug-ins from your /Library/Internet folder as reinstalling QuickTime can sometimes be a bit of a hassle.)
Next, Try downloading the movie instead of playing it. In Safari, paste the url of the movie in the Safari downloads window. If it doesn't download, obviously, it can't play. (Assuming its not a stream rtsp:// url)
Next, pull QuickTime preference and plist files from /Library and her user Library folders, restart, then try again.

How can we display svg files in flex at runtime using FileReference? Actually we are trying to load

how can we display svg files in flex at runtime using FileReference? Actually we are trying to load the svg file from the local directory.

This should give you the JRE version;
System.out.println(System.getproperty("java.version"));
and this should tell you where its running from;
System.out.println(System.getProperty("java.home"));
There are loads more system properties, check the JDK documentation for java.lang.System and look at the getProperties method which has a list.
Stewart

GWIA.ncf each line tries to load like a file

Similar Messages

Maybe you are looking for