GWIA not sending mail to the internet

Let me start out saying that i have no experience with Novell products. I am a person starting a local business and in need for a email server. I have chosen GroupWise 8 for many different reasons. I have Windows Server 2003. GroupWise 8 has been deployed successfully. I am able to receive emails from the internet, but not send emails to the internet. I ether get a error 450 or 550 error. Thats all on the GWIA. I have made a route.cfg. I have no idea if I have the correct IP address of the domain I'm trying to send email to(E.G gmail.com) How could I find out the IP Address of a email domain so I could put in the route.cfg file? I tried doing the ping but no luck. I have everything setup correcly on the domain register side. So, could some please describe what those error codes above mean and how this problem could be fix. Any kind of help will be appreciated. Once again, i have not experience with GroupWise or Novell Products. I'm trying to train myself!

Originally Posted by konecnya
You have a lot mixed in there
- DNS timing out could be a part of the problem. You might want to review
what your DNS servers are, you might have one that is lame or dead and
should be removed
- remove your resolve.cfg for now
- When talking of MX records, try to keep it clear about which domain you
are talking about. For your problem we are only worried about you being
able to resolve the MX records of domains you are trying to send to.
- If both MX records for your domain point to the same host name, then
you'd be just as well off with just one entry.
- If you have a successful DNS resolution, then it is possible that you
are blocked sending out on the SMTP port. From a command line,
telnet gmail-smtp-in.l.google.com 25
if you are blocked, you will get a "Connect failed"
if you are not blocked, you should get either a connection refused, or it
will report something like
220 gmail-smtp-in.l.google.com Ready
if so, type EHLO to get a bit more, then type QUIT to disconnect.
Let us know what works and we'll take if from there.
Andy Konecny
Knowledge Partner (voluntary SysOp)
KonecnyConsulting.ca in Toronto
Andy's Profile: View Profile: konecnya - Novell Forums
Thanks for that! So I did what you told me with the Commend Prompt, and it came back as "Connect Failed". So I'm guessing that this is a ISP problem now? Am I correct?

Similar Messages

After Migration Exchange 2013 does not send mail outside the organization

Dear,
After Migration Exchange 2010 to exchange 2013. We does not send email from the organization but we can received mail from others organization.
Delivery has failed to these recipients or groups:
[email protected] ([email protected]) The server has tried to deliver this message,
without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk.
Diagnostic information for administrators:
Generating server: OGMAIL.domain.net Receiving server: gmail.com (2607:f8b0:400c:c01::1a)
[email protected] 6/11/2014 10:16:10 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '550 4.4.7 QUEUE.Expired; message expired' 6/11/2014
10:03:49 AM - Remote Server at gmail.com (2607:f8b0:400c:c01::1a) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover
to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 2607:f8b0:400c:c01::1a:25'
Original message headers:
Received: from OGMAIL.domain.net (192.168.10.12) by ogmail.domain.net
(192.168.10.12) with Microsoft SMTP Server (TLS) id 15.0.847.32; Mon, 9 Jun
2014 16:13:30 +0600
Received: from OGMAIL.domain.net ([::1]) by ogmail.domain.net ([::1]) with
mapi id 15.00.0847.030; Mon, 9 Jun 2014 16:13:30 +0600
From: Administrator <[email protected]>
To: Administrator <[email protected]>
CC: IT.HW-Masudur Rahman-MRT <[email protected]>, "[email protected]"
<[email protected]>
Subject: RE: Migration batch mrtmove has completed successfully.
Thread-Topic: Migration batch mrtmove has completed successfully.
Thread-Index: AQHPd1JEcid9YEi4F0ue6m1039EwR5top+xp
Date: Mon, 9 Jun 2014 10:13:29 +0000
Message-ID: <[email protected]>
References: <[email protected]>
In-Reply-To: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [192.168.10.2]
Content-Type: multipart/alternative;
boundary="_000_6b0d846f503942d99d44be9aff8d6adfogmaildomainnet_"
MIME-Version: 1.0
Queue viewer:
Identity: ogmail\8786\3470333575194
Subject: testing
Internet Message ID: <[email protected]>
From Address: [email protected]
Status: Active
Size (KB): 4
Message Source Name: SMTP:Default OGMAIL
Source IP: 192.168.10.12
SCL: -1
Date Received: 6/23/2014 3:22:49 PM
Expiration Time: 6/25/2014 3:22:49 PM
Last Error:
Queue ID: ogmail\8786
Recipients: [email protected];2;2;[{LRT=};{LED=};{FQDN=};{IP=}];0;CN=SendMail,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First Organization,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=net;0
Md. Ramin Hossain

What I notice is Queue expired. The message is not going out.
Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
This error states that It tried to connect to the target system but failed to connect out.
Is Exchange 2013 server added in the firewall rule to send communication over port 25?
Do you have use Front end proxy checkbox checked on the Send connector to internet that was created on 2013 (if created)?
If use front end proxy checkbox is checked, then you need to add permissions for your CAS server's IP in the Firewall for outbound port 25 rule. As it appears that the mail is originating from CAS to the firewall. If that checkbox is not checked, we need
to add the Mailbox server's IP on the outbound rule for port 25.

For some reason yesterday and today I can not send mail using the icloud website and help?

From some reason I can not send emails using the icloud website. Not sure why any help

Hi there tamarafromdarien,
You may find the troubleshooting steps for iCloud Mail in the article below helpful.
iCloud: Troubleshooting iCloud Mail
If you can't send mail in OS X Mail
If you receive this alert or a similar alert when sending a message from your iCloud email address in OS X Mail:
“This message could not be delivered and will remain in your Outbox until it can be delivered. The reason for the failure is: An error occurred while delivering this message via the smtp server: server name.”
In OS X Mail, choose Preferences from the Mail menu.
Click Accounts in the Preferences window.
Select your iCloud account from the list of accounts.
Click the Account Information tab.
Choose your iCloud account from the Outgoing Mail Server (SMTP) pop-up menu. Example: “Derrick Parker (iCloud)”.
Note: The Outgoing Mail Server (SMTP) menu also includes an Edit SMTP Server List command. If you choose this command, be aware that the iCloud SMTP server won't be among the servers that can be edited. This is normal.
If you're attaching a large file
Message attachments can't exceed the maximum size allowed by your email service provider or the recipient's email service provider. The maximum size varies by service provider. Try compressing the filebefore sending it, or send your message without the attachment to verify that there are no issues with sending.
-Griff W.

GWIA not sending mail, receiving works without a problem

Hi,
Just upgraded our entire system to GW7. We installed the GW7 GWIA, and
now mail sent to the internet is no longer delivered. I can see that the
mail is being placed in the GWIA/SEND directory, but the GWIA never
seems to initiate the SMTP dialog, so all sent messages are accumulating
in the send directory. I have checked DNS resolving and this is working
just fine.
I have checked the GWIA log files, but can find no clues to why it is
not sending anything out.
Using GWIA 7 on Netware 5.1 SP8
Kind regards,
Hen

Hi Danita here is the GWIA.CFG:
/Home-\\NWCOM-1\data\gwdom\WPGATE\GWIA
/DHome-\\NWCOM-1\data\gwdom\WPGATE\GWIA
/SMTP
/POP3
/IMAP4
/MIME
/MUDAS-2
/SD-8
/RD-16
/P-10
/TE-2
/TG-5
/TC-5
/TR-5
/TD-3
/TT-10
/PT-10
/IT-10
/LdapThrd-10
/ST-4
/RT-4
/ARI-NEVER
/AttachMsg
/DSN
/DsnAge-4
;================================================= =====================
/HN-"gatekeeper.licomnv.nl"
/group
/mh-smtp.cuci.nl
/work-\\NWCOM-1\data\gwdom\WPGATE\GWIA\000.prc\gwwork
/smtphome-\\NWCOM-1\data\gwdom\WPGATE\gwavasig
We upgraded the 5.5 GWIA using the copyonly switch as you suggested in your
upgrade guide. We have tried to change some settings and now the GWIA is
only sending and no longer receiving. When i look at the log file it keeps
starting receiver threads. but they never seem to finish, or actually
receive anything. As for the question of Timothy. We have the GWAVASIG in
place to provide Disclaimers to every outgoing message, but we have tried to
turn that off, but that didn't work either.
The logfile shows:
20:03:20 48F MTP: New receiver thread started, now 2 connections.
20:05:20 48F MTP: New receiver thread started, now 3 connections.
20:17:44 48F MTP: New receiver thread started, now 1 connections.
20:17:53 48F MTP: New receiver thread started, now 2 connections.
20:18:10 48F MTP: New receiver thread started, now 3 connections.
20:20:00 48F MTP: New receiver thread started, now 4 connections.
20:20:55 48F MTP: New receiver thread started, now 4 connections.
20:21:31 48F MTP: New receiver thread started, now 5 connections.
20:36:42 48F MTP: New receiver thread started, now 1 connections.
20:43:10 48F MTP: New receiver thread started, now 1 connections.
20:49:52 48F MTP: New receiver thread started, now 1 connections.
20:54:02 48F MTP: New receiver thread started, now 2 connections.
20:54:06 48F MTP: New receiver thread started, now 3 connections.
20:57:59 48F MTP: New receiver thread started, now 3 connections.
20:58:04 48F MTP: New receiver thread started, now 4 connections.
20:59:53 48F MTP: New receiver thread started, now 3 connections.
21:00:52 48F MTP: New receiver thread started, now 4 connections.
21:02:06 48F MTP: New receiver thread started, now 5 connections.

Exchange not sending mail to the correct recipient addresses when one of the addresses is incorrect

Hi,
I am creating an email msg programatically and sending to the exchange server.
When all the recipient addresses are correct, the mail is sent successfully.
But if one of the addresses is incorrect, the server gives a "550 5.1.1 User unknown" error and theemail msg is not being sent to the correct addresses as well.
When this is tested via Outlook, the mail is sent to the correct addresses and there is an error mail from the server stating that the mail was not sent to the incorrect address, this is the expected behaviour.
What needs to be done to get the expected behaviour? There must be some alternative setting being used by outlook.

Hi,
What you describe can happen if the AntiSpam Agents has been installed
and Recipient Filter Agent is enabled on Mailbox Servers.
Recipient Filter agent
Although the Recipient Filter agent is available on Mailbox servers, you shouldn't configure it. When recipient filtering on a Mailbox server detects one invalid or blocked recipient in a message that contains other valid recipients, the message is rejected.
From:
http://technet.microsoft.com/en-us/library/jj218660(v=exchg.150).aspx#Mailbox
Martina Miskovic

Exchange 2010 does not send mail outside the organization

Hi,
I have an issue with my Exchange 2010 server and the issue is that I cannot send messages outside the organization. There are lot of posts regarding this issue, but in my case the issue is a little bit different and I didn't find an answer. There is properly
configured send connector, DNS records are OK, external domain is properly configured, all Exchange services are started. The server is running on VM with 4 virtual CPUs, 32GB of RAM. When I send a message to ouside domain the message is not delivered.
I have enabled protocol logging (SMTP logging) and there are no records in the log. What I found is that when I reboot the server, immediately after restart I am able to send an email to outside domain, few minutes later the messages, addressed to the
same outside domain are not being delivered.
The VM is created on LUN, presented from storage Fujitsu Eternus DX90S2, communication between the storage and the host is through iSCSI, all the disks on the storage are 2TB, SATA, 7200rpm.
I can't explain to myself what is going on.

No, unfortunately I do not receive NDR, the queue is empty as well. However, I am receiving a message from Exchange and it states that the message, sent to external domain is not yet delivered and the server will continue to try to deliver it, there is no
reason specified for delaying. The message is:
Generating Server: exchange.domain.local
My_Email_Is_Here
#550 4.4.7 QUEUE.Expired; message expired ##

Can not send mail via the server no webmail no smtp relai

*relai host username and password is set correct:*
log:
Sep 8 22:00:07 macserver postfix/smtp[4939]: warning: SASL authentication failure: No worthy mechs found
Sep 8 22:00:07 macserver postfix/smtp[4939]: CD63667854: to=<[email protected]>, relay=smtp.1und1.de[212.227.15.167]:25, delay=2.1, delays=0/0.07/2/0, dsn=4.7.0, status=deferred (SASL authentication failed; cannot authenticate to server smtp.1und1.de[212.227.15.167]: no mechanism available)
*I did not understand that??!!*
*with my old server 10.5 this does run perfect*

I use Apple Mail. Since I upgraded to 10.6.1 my mailboxes go offline without reason. I have smtp problems although all settings are OK. When will all those problems be fixed by Apple?

Can not send mail via the server 7 no webmail no smtp relai

*relai host username and password is set correct:*
log:
Sep 8 22:00:07 macserver postfix/smtp[4939]: warning: SASL authentication failure: No worthy mechs found
Sep 8 22:00:07 macserver postfix/smtp[4939]: CD63667854: to=<[email protected]>, relay=smtp.1und1.de[212.227.15.167]:25, delay=2.1, delays=0/0.07/2/0, dsn=4.7.0, status=deferred (SASL authentication failed; cannot authenticate to server smtp.1und1.de[212.227.15.167]: no mechanism available)
*I did not understand that??!!*
*with my old server 10.5 this does run perfect*

I second That...
Please give us a hint!

Mail 10.8.3 not sending mail from intended account

Since upgrading from 10.8.2 to 10.8.3, my wife is having a new problem where Mail is not sending mail from the intended account.
She has 2 mail acocunts, and normally sends most e-mail from one of them. That mail account is set as the default to send messages from.
Now when she composes messages, it sends them from the other account, even if she has made certain that the pull-down choice of "send message as..." is set to the correct/desired mail account.
The only way she was able to stop this was to deactivate the other e-mail account in Mail's preferences.
Is anyone else having this problem?

Hi.
Please click on the Mail > Prefrence > Account.
then click on the first account on the left side & Uncheck the option 'Use onlythis server'
repeat the step for the second account aswell.
this should fix your issue.
Kind regards,
Ayaz

I am getting this message: An error occurred while sending mail. The mail server responded: 5.3.4 Requested action not taken; To send your message, please sign into your account online first and solve a puzzle. (Sorry for the inconvenience--these puzzles

I am trying to send a message with an attachment, I get this message: An error occurred while sending mail. The mail server responded: 5.3.4 Requested action not taken; To send your message, please sign into your account online first and solve a puzzle. (Sorry for the inconvenience--these puzzles help us stop spammers.). Please check the message and try again.
== Today

Me too (with Thunderbird). EXCEPT it reads
Requested action not taken; This account is currently blocked from sending messages. If you don't think you've violated the Windows Live Terms of Use, please contact customer support...
Occasionally the mail "sends", but it is unpredictable. Tech Support at Qwest (for q.com under Windows Live) does not find a problem at their end.
More suspiciously, the same account accessed from my Mac does not seem to exhibit this problem. Have reloaded T'bird. Recurred again.

An error occurred while sending mail. The mail server responded: Relaying not allowed.

Suddenly I am not able to send any email from my account, from pc or phone.
It gives error message "An error occurred while sending mail. The mail server responded: Relaying not allowed. Please check the message recipient --------and try again."
I have checked account setting and is correct. please help

This message, which comes from the server, usually means that you are using an smtp server provided for use with one particular account to send messages "from" other accounts. The fact that it also happens with your phone does indicate that it is external to Thunderbird.
How many different email accounts do you have? How many different providers are involved?

Why can I receive mail on my iPAD during my visit to the USA but not send mail?

Why can I receive mail on my iPad during my visit to the USA but not send mail?

Double check to make sure that your same email addresses are set up on both devices in the Messages settings. Also ensure that you have text messaging forwarding turned off if you do not want to receive them on your iPad.

When I open my sleeping mac, it makes the noises that indicate mail is being sent. I am not sending mail. Is someone somehow using my mail?

When I open my sleeping mac, it makes the noises that indicate mail is being sent. I am not sending mail. Is someone somehow using my mail?

go to https://appleid.apple.com/ and try to reset it there. when updating to ios 7 it does have activation lock so you have to know the apple id and password. contact apple and they make be able to assist you with apple id password.

Hi, I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mail are not receiving. Mail queue showing Connection refused error. Please help me

I am new to Mac and i managed to install and configure all the services. Now my issue is when i sending mail using the local server to internal, mails are not receiving. Mail queue showing Connection refused error. Please help me
Thanks
GIRI

Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

Problem in sending mail with the given code

package booodrive;
Some SMTP servers require a username and password authentication before you
can use their Server for Sending mail. This is most common with couple
of ISP's who provide SMTP Address to Send Mail.
This Program gives any example on how to do SMTP Authentication
(User and Password verification)
This is a free source code and is provided as it is without any warranties and
it can be used in any your code for free.
Author : Sudhir Ancha
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
import java.io.*;
To use this program, change values for the following three constants,
    SMTP_HOST_NAME -- Has your SMTP Host Name
    SMTP_AUTH_USER -- Has your SMTP Authentication UserName
    SMTP_AUTH_PWD -- Has your SMTP Authentication Password
Next change values for fields
emailMsgTxt -- Message Text for the Email
emailSubjectTxt -- Subject for email
emailFromAddress -- Email Address whose name will appears as "from" address
Next change value for "emailList".
This String array has List of all Email Addresses to Email Email needs to be sent to.
Next to run the program, execute it as follows,
SendMailUsingAuthentication authProg = new SendMailUsingAuthentication();
public class SendMailUsingAuthentication
private static final String SMTP_HOST_NAME = "sample.com";
private static final String SMTP_AUTH_USER = "demo";
private static final String SMTP_AUTH_PWD = "demo";
private static final String emailMsgTxt      = "Online Order Confirmation Message. Also include the Tracking Number.";
private static final String emailSubjectTxt = "Order Confirmation Subject";
private static final String emailFromAddress = "[email protected]";
// Add List of Email address to who email needs to be sent to
private static final String[] emailList = {"[email protected]"};
public static void main(String args[]) throws Exception
    SendMailUsingAuthentication smtpMailSender = new SendMailUsingAuthentication();
    smtpMailSender.postMail( emailList, emailSubjectTxt, emailMsgTxt, emailFromAddress);
    System.out.println("Sucessfully Sent mail to All Users");
public void postMail( String recipients[ ], String subject,
                            String message , String from) throws MessagingException
    boolean debug = false;
     //Set the host smtp address
     Properties props = new Properties();
     props.put("mail.smtp.host", SMTP_HOST_NAME);
     props.put("mail.smtp.auth", "true");
    Authenticator auth = new SMTPAuthenticator();
    Session session = Session.getDefaultInstance(props, auth);
    session.setDebug(debug);
    // create a message
    Message msg = new MimeMessage(session);
    // set the from and to address
    InternetAddress addressFrom = new InternetAddress(from);
    msg.setFrom(addressFrom);
    InternetAddress[] addressTo = new InternetAddress[recipients.length];
    for (int i = 0; i < recipients.length; i++)
        addressTo[i] = new InternetAddress(recipients);
msg.setRecipients(Message.RecipientType.TO, addressTo);
// Setting the Subject and Content Type
msg.setSubject(subject);
msg.setContent(message, "text/plain");
Transport.send(msg);
* SimpleAuthenticator is used to do simple authentication
* when the SMTP server requires it.
private class SMTPAuthenticator extends javax.mail.Authenticator
public PasswordAuthentication getPasswordAuthentication()
String username = SMTP_AUTH_USER;
String password = SMTP_AUTH_PWD;
return new PasswordAuthentication(username, password);
package booodrive;
public class Test {
     public static void main(String args[]){
          SendMailUsingAuthentication authProg = new SendMailUsingAuthentication();
I am not able to send mail using the above given codes. Can anyone please help?
Rony
Edited by: RonyFederer on Aug 10, 2008 9:04 PM

Your first step is to diagnose the problem.
1. Does the code compile? If not, what error messages appear?
2. Does the code run? If not, what error messages appear? What's in the stack trace?
3. Does the code do what you expect it to do? If not, what are the differences?

GWIA not sending mail to the internet

Similar Messages

Maybe you are looking for