GX60 and GTA5: game runs on integrated graphics
I have an MSI gx60 notebook with 7660G+7970m video card. Today i tried to play GTA5 but it seems like game runs on 7660 instead of 7970, memory counter in graphic settings shows only 512 mb. How can i force game to use my 7970? Maybe there is the way to disable 7660?
And is there is any chance to get official msi's update for graphics in my machine?
Also played bf4, bf3 and many other games without problems.
Sorry for my bad english.
Hi alpatovdanila,
If other games are all running with the 7970 graphics but only the GTA5, then it's clearly that the problem is from the game itself.
Try to set the 7970 graphics as the active graphics for GTA5 on your GX60.
Right click on the desktop and select "Configure Switchable Graphcis", add GTA5 to the applications and set "High performance" at the Graphics Setting column, click apply to save the setting.
Similar Messages
-
MSI GT60 Always Runs On Integrated Graphics Card
Hello everyone. Not sure if this question was asked before. But i cant get my new laptop to run on nvidia graphics. Was playing Heroes of Newerth today and realised i was getting 45 fps only. So i lowered the graphics. The fps raised up to 80. I didnt think the gtx770M should be this weak so:
i disabled the integrated graphics from device manager and re-ran the game. This time fps was awfully less. Like 10-15 fps.
I disabled nvidia graphics to make it run on integrated graphics. Re-ran thegame again i got like 80 fps. So im pretty sure the computer is running on integrated graphics card.
I configured stuff on nvidia control panel. Set preferred gpu to Nvidia Graphics Processor. Still it doesnt seem to help. Fps is around the same level.
I reinstalled the drivers from the laptops own cd. No help either. I also did a clean install. So its not about the installation either.
Couldnt find any way to change the default gpu on bios. The laptop also came with windows 8 64 bit
The system is -
i7-4700mq processor
Nvidia gtx770M gpu with 3gb memory.
16 gb 1600 mhz ddr3 ram
250 gbsuperraid ssd. 750 gb 7200 rpm for storage
Anyone else experienced the same problem? Or anyone knows how to fix this?Quote from: aliycen on 17-June-13, 00:31:21
I have tried that too. Then I got the error "this driver could not find compatible graphics hardware". I looked it up and tried a few other things. But then I ended up with a blinking black screen with rebooting. Now i restored everything and lost all my date. The computer is back to its former slow self. I don't know what to do. When i alt + tab from a game and return to it. The fps is almost twice as high. Then it quickly drops down to 40s again. I cant install the latest drivers either.
you have some mess
restore OS to factory default -
Which games can the integrated graphics of the km4m-l handle?, resolutions?
Well, not many games, maybe, MAYBE Quake III at like 640x480 lol, and maybe like, solitare?
Resolutions??? Welll, i wouldnt want to go to high with integrated heheh
Get a cheap card like a 5200, i love mine, and i can play call of duty 800x600 with all graphics on Extra...and all of the settings maxed...
hint hint, get a 5200 with a fan pre-installed, better oc/ing and usually shows are higher quality!
integrated - -
MSI Z77A-GD65 Intel 7 Series Motherboard Integrated Graphics
Hi i'm a newbie to computer parts and the computer world in general on what does what. I'm only 15 but i'm looking to upgrade my Mobo and CPU I have found a bundle (MSI Z77A-GD65 Intel 7 Series Z77 Motherboard and Intel Core i5-3570K 3.40 GHz Quad Core Unlocked Bundle) on tiger direct and it looks like a good deal. But before I buy it I WAS going to upgrade my GPU before I were to get a new Mobo and CPU. I've done some research on the MSI Z77A-GD65 and I saw it has integrated graphics, but I don't entirely know what that is. I was curious if that's a graphics card and if so what it compares to. I have a Nvidia GTX 9800 graphics card that's fairly old now and I was wondering if a Mobo with integrated graphics acted as a graphics card and if so what it would compare to. If you want to know anymore specs about my computer let me know and i'll be happy to give them out.
It's not the mainboard to have integrated graphics, it's the cpu. The Core i5-3570K has Intel HD Graphics 4000 integrated. The mainboard only offers the output connectors to use it. All current generation Intel cpus have integrated graphics which can be used or not. The HD Graphics 4000 is not meant for gaming of course and would perform worse than your GTX9800 in a 3d game. With a supported mainboard (like the Z77A-GD65) the integrated graphics can be used along the discrete vga for Lucid MVP to better performance and gaming experience (see for more details: https://forum-en.msi.com/index.php?topic=160519.0).
-
Systemd multiseat with NVidia card and Intel integrated graphics
I'm trying to set up multiseat Gnome 3 on a system running the nvidia proprietary drivers. The first seat on the nvidia GPU is working fine. For the second seat I'm trying to use an integrated Intel GPU, but all I get is the GDM "Oh no, something has gone wrong" screen. I'm not sure why, but I suspect it could be because the intel driver is also trying to load nvidia's libglx.so:
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X.Org X Server 1.16.1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Release Date: 2014-09-21
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X Protocol Version 11, Revision 0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Build Operating System: Linux 3.16.1-1-ARCH x86_64
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Current Operating System: Linux comp1 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=4ed01629-9f62-4642-8815-66a9ef652965 rw quiet
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Build Date: 21 September 2014 10:53:13AM
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Current version of pixman: 0.32.6
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Before reporting problems, check http://wiki.x.org
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: to make sure that you have the latest version.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Markers: (--) probed, (**) from config file, (==) default setting,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (++) from command line, (!!) notice, (II) informational,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (++) Log file: "/dev/null", Time: Wed Oct 15 21:47:02 2014
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (++) Using config file: "/run/systemd/multi-session-x/seat1"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Using config directory: "/etc/X11/xorg.conf.d"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Using system config directory "/usr/share/X11/xorg.conf.d"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) No Layout section. Using the first Screen section.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) No screen section available. Using defaults.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (**) |-->Screen "Default Screen Section" (0)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (**) | |-->Monitor "<default monitor>"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) No monitor specified for screen "Default Screen Section".
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Using a default monitor configuration.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (**) Option "DontVTSwitch" "True"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (**) Option "AutoAddDevices" "True"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (**) Automatically adding devices
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Automatically enabling devices
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Automatically adding GPU devices
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) The directory "/usr/share/fonts/OTF/" does not exist.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Entry deleted from font path.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Entry deleted from font path.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Entry deleted from font path.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) FontPath set to:
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: /usr/share/fonts/misc/,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: /usr/share/fonts/TTF/,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: /usr/share/fonts/Type1/
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) ModulePath set to "/usr/lib/xorg/modules"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) The server relies on udev to provide the list of input devices.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: If no devices become available, reconfigure udev or disable AutoAddDevices.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loader magic: 0x818d80
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module ABI versions:
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X.Org ANSI C Emulation: 0.4
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X.Org Video Driver: 18.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X.Org XInput driver : 21.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: X.Org Server Extension : 8.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (EE) systemd-logind: failed to get session: PID 323 does not belong to any known session
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) xfree86: Adding drm device (/dev/dri/card0)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "glx"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module glx: vendor="NVIDIA Corporation"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: compiled for 4.0.2, module version = 1.0.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Module class: X.Org Server Extension
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) NVIDIA GLX Module 343.22 Thu Sep 11 15:55:13 PDT 2014
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Matched intel as autoconfigured driver 0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Matched modesetting as autoconfigured driver 1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Matched fbdev as autoconfigured driver 2
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Matched vesa as autoconfigured driver 3
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Assigned the driver to the xf86ConfigLayout
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "intel"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module intel: vendor="X.Org Foundation"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: compiled for 1.16.1, module version = 2.99.916
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Module class: X.Org Video Driver
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: ABI class: X.Org Video Driver, version 18.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "modesetting"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) Warning, couldn't open module modesetting
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) UnloadModule: "modesetting"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Unloading modesetting
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (EE) Failed to load module "modesetting" (module does not exist, 0)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "fbdev"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) Warning, couldn't open module fbdev
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) UnloadModule: "fbdev"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Unloading fbdev
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (EE) Failed to load module "fbdev" (module does not exist, 0)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "vesa"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module vesa: vendor="X.Org Foundation"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: compiled for 1.16.0, module version = 2.3.2
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Module class: X.Org Video Driver
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: ABI class: X.Org Video Driver, version 18.0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) VESA: driver for VESA chipsets: vesa
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (WW) Falling back to old probe method for vesa
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2000
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Creating default Display subsection in Screen section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: "Default Screen Section" for depth/fbbpp 24/32
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): Depth 24, (--) framebuffer bpp 32
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): RGB weight 888
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): Default visual is TrueColor
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output VGA1 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output VGA1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output HDMI1 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output HDMI1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output DP1 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output DP1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output HDMI2 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output HDMI2
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output HDMI3 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output HDMI3
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output DP2 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output DP2
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output DP3 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output DP3
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (--) intel(0): Using a maximum size of 256x256 for hardware cursors
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Output VIRTUAL1 has no monitor section
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Enabled output VIRTUAL1
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (--) intel(0): Output HDMI1 using initial mode 1280x1024 on pipe 0
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): TearFree disabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): DPI set to (96, 96)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loading sub module "dri2"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "dri2"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module "dri2" already built-in
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Loading sub module "present"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) LoadModule: "present"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Module "present" already built-in
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) UnloadModule: "vesa"
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) Unloading vesa
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) Depth 24 pixmap format is 32 bpp
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): SNA initialized with Sandybridge (gen6, gt1) backend
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): Backing store enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): Silken mouse enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): HW Cursor enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): DPMS enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): [DRI2] Setup complete
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): [DRI2] DRI driver: i965
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): [DRI2] VDPAU driver: i965
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): direct rendering: DRI2 enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): hardware support for Present enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (==) intel(0): display hotplug detection enabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (--) RandR disabled
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): switch to mode [email protected] on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none
Oct 15 21:47:02 comp1 gdm-Xorg-:1[323]: (II) intel(0): Setting screen physical size to 338 x 270
Unfortunately the config file for the second X server is /run/systemd/multi-session-x/seat1, which is not persistent. Is there any other way to get a different config file to the second X server, so I can force it to load the default libglx.so?
For completeness, output of seat-status is as follows:
seat1
Sessions: *c1
Devices:
├─/sys/devices/pci0000:00/0000:00:02.0/drm/card0
│ drm:card0
└─/sys/devices/pci0000:00/0000:00:02.0/graphics/fb1
[MASTER] graphics:fb1 "inteldrmfb"One thing you can do to ensure highest perfomance on games is go to the Nvidia Control Panel, Manage 3D Settings, Programs, then find the game you want and set it to use only NVIDIA High Performance (or Discrete) graphics. You can't use both cards at the same time as of writing this (DirectX 11), but with the arrival of Windows 10 and DirectX 12 on July 29 you will be able to use both at once to increase performance. Until then, though, it is simply not possible to use both at once. The best option is to just use the GTX 860M.
-
I have the following system and want to run Elements12 or 13 efficiently; Vista Home Premium 32bit, Intel core 2duo [email protected], 3 GB RAM DDR2, Mobo MSI MS-7267 and on-board graphics chipset. I tried to run Elements9 and was rather slow so you can imagine Elements12 or 13..... Do I have to change the whole system or just buy a suitable VGA card? Which card would be OK for this system? Thanx..
stavrosd
NVIDIA GT730
GeForce GT 730 | Specifications | GeForce
I think that the key here is going from a 32 bit to 64 bit computer operating system where Premiere Elements 11, 12, or 13 can become 64 bit application in a Windows 7 or 8.1 64 bit computer operating system. The increased computer resources implication of that should increase the frequency of getting the larger project taken to a successful complete more than before. A lot of this has to do with multitasking potential.
Premiere Elements does not support CUDA as seen in high end video cards/graphics cards. Since Premiere Elements 9, Premiere Elements has no GPU accelerated effects. But, I would decide on the best card for you based on overall computer rather than just for use in Premiere Elements. If you are interested in computer games, that will impact your card decision.
The use of a non super NVIDIA or ATI card should work for you. But, I have used neither.
I would consider more installed RAM, depending on your computer motherboard slots.
You might want to discuss the choice of the card with NVIDIA.
Compare and Buy GPUs | GeForce
I suspect that
My desktop and laptop computer both use the integrated Intel HD Graphics where my strengths included installed RAM, free hard drive space, and computer processor.
Please consider. Any questions, please do not hesitate to ask.
Thank you.
ATR -
Hi there. I am in the process of choosing a laptop to load elements 11 on.Putting minimum requirements aside, is there any advantage in getting a dedicated as opposed to an integrated graphics card, would it run faster on an i5 as opposed to an i3 processor and does a screen resolution of more than 1024 x 768 make any diference in elements 11? What should I be looking for to enable elements 11 to work efficiently without over specing? thanks folks !
PSE doesn't make big demands on the graphics card, but you want a screen that is at least 800 px tall to be able to use all the features. Some things, like the raw converter, may not appear at less than that.
-
Is ProBook 4520s capable of running MMORPGs and other games like Medal of honor and that stuff?
well, i recently bought Hp ProBook 4520s. it is great,fast and i really like it but it has a problem, i can't run MMORPGs or other games that have good graphics like Medal of honor and generals zero hour and counter strike and that stuff. when i analysed my laptop using few programs and websites i found such a strange thing. it should run these games perfectly but just got 1 simple problem. it seems like if it got no video card !!!! Video ram 0.0 B!!! No 3D No hardware T&L! Pixel shader version 0.0 vertex shader version 0.0!!! here is the link to the site i used to analyse it......... please try to help me because i am trying to solve that problem for more that 2 weeeeeks !! and thankssss for helping me C u later
Do you know what kind of graphics card you are supposed to have? Try to reinstall the drivers for your model. Click this link to go the HP Support. You can click "Automatically detect it" to get the right model. It should take you to the support page for your model. It will have the drivers you need.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
You probably need a dedicated graphics card for those games. Intel HD Graphics isn't made for gaming. -
All right, here's what's going on. I have been trying ot run a very graphics intense game on my Macbook Pro with Retina Display through bootcamp on windows 7. When I start the game up, it runs beautifully.... for about ten minutes. Five minutes in, the fans start to whirl loudly. By ten minutes in, performance begins to degrade noticibly and the game starts to stutter. I live with the stuttering until it becomes completely unreasonable and I shut down the game. When I come back to my computer several hours later, the process repeats.
Here is what I believe is happening. When I start the game, the CPU immediately begins to heat up, as CPUs do. Ten minutes in, the CPU has heated up past the safety limit and begins throttling itself back so as to protect itself. Over the course of the next little while, it continues to throttle itself until it finally doesn't have enough power to properly run the game at any reasonable speed, at which point, I get frustrated and quit. My concern is this. I understand that mobile rigs aren't necessarilly the most game friendly, however, this computer should be more than capable enough to handle some light gaming. (Mind you, I'm only playing ten minutes in when the game starts to lag.) Is this something I need to bring into Apple? Is this normal?
Thanks for your help!
MalaxtomDid you download and install the Apple drivers onto the Win7 system when setting up BootCamp? Without them, Windows will have no way of getting the fans to do their stuff when things get hot.
-
Switch between integrated graphics and discrete graphics on a Satellite P-50A
I have a PSPMHU-0C702Q and I'd like to know if there is a way to switch between the intel integrated graphics and the nvidia discrete graphics?
And/or...is there a way to turn off either one?
I'd like to use the integrated graphics doing web and email but when gaming, switch to discrete.
I found a post stating the following for a different machine...
"...Your CPU has integrated graphics capability, but your system utilizes the ATI graphics card, so the integrated graphics on the CPU are not used. The ATI graphics card has better specs than the integrated graphics anyway...."
Which points to the discrete graphics being used, however, when I run the directX diagnostic, the display device shown is the intel HD graphics 4600.
Any insight? Thanks in advanced.
BI went through a similar pain recently. Assuming that your hardware supports having both display devices enabled at the same time, set up the IGP using the modesetting driver. This doc should have everything you need to get set up:
http://uk.download.nvidia.com/XFree86/L … ndr14.html -
No DVI output with T420 on integrated graphics card and Mini Dock Series 3
Because of some application problems I have to set my new T420 to only use the integrated graphics card (disabling the NVidia Optimus feature). In this configuration I seem to be unable to use the DVI port on the Mini Dock Series 3, there is simply no signal and Windows reports that no monitor could be found. The VGA output works but the picture quality is quite bad.
Is this a known design limitation or do I deal with a driver issue?
Thanks
DanYes, that works but there is the drawback of battery life. In the course of the day I often undock the laptop to go to meetings and using the discreet graphics card uses a lot more power and significantly reduces the time i can work without power. I would have to restart the laptop and change the setting in the BIOS after I undock, which is just not practical. For what I do I don't need the graphics power of the discreet card.
-
I have updated my I pad dut I'm still having problems my iPad seems to freeze and when I go to put in my pin it take a few seconds before the numbers go in and my games stop and start and stop and start for a bit before they run properly
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Cheers, Tom -
I am having problem with my games application... no idea where is the problem. non of the game run smoothly 1st in 1st its hard to open the apps in it open than also it will close automatically. Please help me out
Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..
If necessary...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414 -
Report server running in integrated mode , but cannot deploy reports again and again prompts for login
Nur MondalHello,
How are you deploying the reports? Via Visual Studio, Report builder or manually uploading RDL files?
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS -
Problem with nvidia and integrated graphics
I'm having graphics problems with my notebook. I installed the latest Nvidia 820m drivers but still 3d apps are very slow.m Also inside dxdiag it shows that the integrated graphics has only 265mb. Is there something wrong? I just bought the machine. [url=http://postimg.org/image/hj4rk182d/][img]http://s10.postimg.org/hj4rk182d/image.jpg[/img][/url]
lovelaze wrote:
karol wrote:Have you tried https://wiki.archlinux.org/index.php/Bumblebee ?
Thanks. I will give it a try tomorrow.
Is it meant to have both the Intel and Nvidia drivers installed?
Sort of. You don't install the regular nvidia drivers package but the bumblebee one.
Maybe you are looking for
-
Non cumulative infocube without BX
Hi Experts, I need to compress and create aggregates for the inventory cube (Has Non cumulative in/out flow KFs) We do not use BX as all of the initial stock levels are defined using movements. Does this change anything? Which way is it as I have se
-
Regarding writing file in application server with ISO8859 characters
Hello Experts, I have a requirement that i need to write my file which read from the data base in ISO8859 characters in the application server. Is there any FM or any particular code conver normal data base data to ISO8859 characters ? Please give
-
Final Cut Pro Render/ export crashes
hello everyone, i've been working on a very lengthy project which i am trying to finish up on final cut pro 5 but the problem is final cut is being extremely difficult and will not get through rendering or exporting a single thing without crashing. i
-
CS4 Design Premium serial number not accepted?
We are trying to move an installation of CS4 Design Premium between computers in our organisation. It has been successfully unregistered and uninstalled from the original old computer, but we are unable to successfully install it to the new computer.
-
State objects with pdf's on indesign
I have an transition of state objects with pdf's but automatic reproduction not function in the ipad. I can see it in the Content viewer desktop. Help me!!!