GX60 with 7970m - same Enduro problem as in other notebooks with Enduro solution

Hello,
I've purchased GX60 notebook few days ago. Very solid machine.
However, I did lot of reseach and trial and error using programs like MSi Afterburner, Fraps ect. and noticed that no matter witch VGA driver I use - be it the one from MSi driver page or AMD's 12.9 beta/AMD's 12.11 beta - the 7970m is working at about only 50-60% of it's horepower.
Crysis for instance uses only ~50% of 7970m, while clearly it should use 100% of it's power. Currently I am unable to play on ultra or extreme settings because the game lags too much.
Same with Skyrim, while game is playable on ultra settings, it also uses only 50-60% of the GPU.
Deus Ex: Human Revolution - same here.
I fiddled with CCC settings and tried a lot of combinations - still no dice nor effect...
Am I doing something wrong? or it is truly the A-10 CPU simply holding the 7970m back? (seems absurd since this is meant to be a gaming notebook capable of running games like Crysis 2 on ultra, isn't it?)
Is MSi going to fix the Enduro problem with a new driver? is MSi aware of this problem with Enduro at all?
Any tech/software support from MSi staff would be very much appriciated.
Regards,
LisuPoland

Quote from: klye on 30-January-13, 05:52:37
radier:
so if Use Switchable Graphics menu to assign performance profile for each game , will directly using AMD 7970 ,you sure?? have you check?
i would like to put one pic of my game setting that only show 7660G available in list for graphic adapter , but dunno how to insert pic here...
in order words, the notebook only can detect 7660G adapter....
While I'm not familiar with AMD's version of switchable graphics....I would imagine that you need to tell the driver/notebook that for this particular program, you want to use the 7970 card, and then when you run that program, it will detect it and automatically enable the 7970.
As far as the usage being so low with the 7970, I'm not sure what to say. I know that AMD's Enduro switchable graphics has always been buggy to say the least....it wouldn't surprise me if it didn't still quite work as expected.

Similar Messages

I have two iMac's on the same desk. Once iMac pairs with both keyboards and mice. The other pairs with the mouse, but I cannot get the keyboard to connect. How do I get a keyboard and mouse to connect to each iMac independently?

I have two iMac's on the same desk (about a foot apart). One iMac pairs with both keyboards and mice. The other pairs with the mouse only; I cannot get the keyboard to connect. How do I get a keyboard and mouse to connect to each iMac independently?

Antaeus00 wrote:
I tried sending a request for help,
But did you succeeed in sending a request for help?
Did you receive a response? How long has it been since you sent a request?
but I need someone with more authority to talk to.
There is no one with more authority than iTunes store support. We herem are only users.

I can only play songs from the cloud that are checked with a dark checkmark-I have many other songs with a faint check that don't play

I can only play songs from the cloud that are checked with a dark checkmark-I have many other songs with a faint check that don't play

Restoring from backup will result in the iPod being like it was when the backup was made. If you restore via iTunes, you have to have all the synced media in your iTunes library since those are not included in the iPod backup.

Is the apple laptop with 4gb ram and i5 better than other laptop with 6gb ram and i5

is the apple laptop with 4gb ram and i5 better than other laptop with 6gb ram and i5

Well it depends on the age. http://www.everymac.com/ should help you identify the age of the two models.
Apple may use two processors called i5, but newer models have different optimizations than older models.
The processor is usually not the main affect on speed. RAM helps, but barely unless everything is on an SSD already. Hard drive speed is usually the limiting factor of speed on computers. eSATA hard drives with higher RPM can often yield the fastest results because notebook hard drives tend to be slower that are not SSD, but for those you need either Express/34 or Thunderbolt based adapters.

I recently downloaded a "free" app, the problem resides that when I try to buy an extension of this app, a message appears saying that I can't buy it with that visa card. I bought other apps with the same card, any solution?

As I was saying, I have an iPod Touch which I bought this Summer on August, and until recently it never gave me a problem.
I recently downloaded a "free" app (which means, it's partly free, so if I want it completely I should buy one of the "extensions" it has).
Well, today I was trying to buy an "extension" for an app. I did everything as per usual, but for some reason, there appears to be a message that I can't buy it with visa, when I've already bought other apps and things online with the same card, without a problem. Which should cross the option that the problem resides in the card (I also contacted with the bank and everything was as per usual with the card).
Also, a friend of mine has this same app and for this person everything went smoothly without a problem.
Does anyone of you know what is the problem or what should I do?

The message says: "The payment method has been denied, try another method"
I'm living in the same country and city since I was born, so I don't think the location is the problem.
And yes, I paid with the card a meal in Burguer King today. And nothing more.

I have an IPA2 wifi 3g working fine with wifi up for 3 monthes then from two weeks it get connection but after 1 minutes stop to serf/download with signal and connection always present. With the same router are still connected others 3 pc working!

I all,
the scenario is the following:
WIFI connection with TISCALI operator. Encryption made by WPA2 EAS with router SITECOM or tested also with another router DIGICOM with WPA TPK.
From December up to end of March the IPAD2 working perfectly serfing and downloading.
By two weeks it has a very strange behavour without have changed any configuration on IPAD or network:
with WIFI turned on it discover about 4 different ntw among them the mine, I successfully authenticate with psw the my ntw,
the IPAD2 start to run with Safari without problems, but after about 1 minutes, it stop to serf or download and answer that the Server cannot be reached or the page cannot be open, at the same time the signal is present on the icon of WIFI and it is strong.
This problem is systematic: If I dissasociate the ntw and then authenticate again I start to serf again for 1 minutes (more or less) and then it stops again, this occurs every time I authenticate the ntw after a disassociation.
I made some test changing the encryption from WPA2, WPA and also without encryption but the result was always the same, after about one minute the server seems to be for the IPAD2 no more reachable while the others PC and netbook connected to the same router continue to serf/download without problems!
I also tried to change the router with a DIGCOM that I did not use generally, but the behavour is always the same.
Since the IOS was the 4.3 revisin, I made the upgrade by means Itunes to IOS 5.1 succesfully installed.
But unfortunatelly all test repeted have had the same negative result with the same behavour!
Yesterday I tried to do the complete restore of the System but the tests had the same rsult.
I really don't know how to proceed, the problem started suddenly without any action from my side....is there someone that can help me?
Thanks Massimo

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Can I have two LANs with the same IP route to each other

Hi there,
I have a customer who has a televantage voip network on a private 192.68.0.0/24 network but has two sites connected via a wireless tower that wants to enable QOS over between the two sites by using a 2621XM router at each end. I've enabled QOS on both routers for voice and video but haven't deployed this yet since I'm not sure if I need to change one of the sites networks to a different network number since I'll have the routes in place with a 192.168.1.0 on the WAN side. If both remote networks stay with the same number scheme of 192.168.0.0/24 will they be able to find each other when requesting where a remote 192.168.0.0 host is or do I need to change of the offices networks to a 192.168.2.0 network to make this work? Sounds kind of basic but before deploying I wanted to get some input...thanks.

Routers cannot route unless the address blocks for each interface are different.
If you have two sites connected by any kind of link, and you'll use one site as a gateay to the Internet, then you'll need at least four different addresses/ blocks:
The 'b' site LAN, i.e., fa/0/0:192.168.0.0/24
The 'b' site WAN (interconnecting link), i.e., fa0/1: 192.168.1.1/30
The 'a' site WAN (interconnecting link), i.e., fa0/1:192.168.1.2/30
The 'a' side LAN, i.e., fa0/0:192.168.2.0/24
(assumes that your wireless link is acting as a bridge or non-routing link) - the fa0/1 device connects to the wireless devices).
If you use the same router on the 'a' side for the interconnecting link for both the 'a' LAN and the Internet gateway, then the third interface would be your Internet WAN address.
The 'b' side LAN interface is your 'b' side default gateway for you clients
The 'a' side LAN interface is the 'a' side default gateway for your clients
Set a default gateway on the 'a' router to the ISPs Default gateway / next hop address.
If you're using a third router for an Internet gateway, then the LAN interface address becomes the default gateway for the clients on that LAN, and you'll need to set up a static route pointing to the other LAN in the routers that connect the two LANs..
A routing protocol may be useful but, depending on your actual bandwidth available, it's probably better to just set up static routes (no routing protocol bandwidth utilization).
The /30 for the WAN link gives some economy of address usage, but it may also secure the link better, since there are no additional addresses for the intruder to use; they'd have to spoof one of the two valid addresses (.1 & .2) as well as crack your encryption (and / or other security).
There's an armload of other possible configurations / topologies / address schemes, I believe this one would be reasonably common.
The bottom line is that a router can only route from one address block to another. In order to pass traffic between two segments with the same address block, you need a bridge / switch, or some other layer one/two device (like a wireless transceiver pair).
Good Luck
Scott

How can you remove old conversations from the iMac. Even when I remove them they return when I start a new conversation with the same person. Only happens on iMac with the Beta iMessage program

How do you remove an old conversation using the Beta iMessage on an iMac. When I open a new conversation with the same person the old conversation comes back

Hi,
Previously iChat had tried a Last Chat/IM option when using Saved Transcripts - which itself was an option.
iChat has also tried "Saving" the Last Chat by leaving a Chat window open and using something similar to the Lion method of showing an app in the state is was closed in.
In Messages the option to Save Transcripts has been removed and Chats or all types are saved as a matter of course.
What this tends to mean for your iChat style Buddy Chats is that it opens all the Transcripts for that buddy as a sort of History you can scroll back through if you want (I have some Buddies with saved chats gong back to 2004)
With the Syncing of iMessages with iPhones and iPads (or Touches) then it seems this works slightly differently.
Although you can delete the chat and the contents of the Chat as separate action it is true that in the Beta as soon as you connect to the same Contact that the contents of the previous chats are shown to you.
I have found that Messages stores a data base of info on iMessages in Your Home Folder/Library/Messages
I have found that deleting this chat-db removes the "History" that keep popping up.
By default the Saved "iChats" are also stored in the Home Folder/Documents/iChats (At least this is the default place iChat used and they go to the same iChats folder where ever you had it)
Some people claim removing iMessages saved here stops the "History" reappearing.
In Lion the only access to the Home Folder/Library is via the Finder's Go Menu and hiding down the ALT key
10:00 PM Sunday; June 10, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Open an opened PDF in OS X Preview with a Windows 7 Adobe reader or other (running with Parallels Desktop)

Hi guys,
I just want a simple way to open a PDF that is already opened in OS X Preview with an application in my Windows 7 (running on Parallels 9).
I think it's possible with "Services" menu, but how??
I just want to do this with Word, Excel and Powerpoint files there are opened in Mac OS X and I want to open them in Parallels' Windows 7.
I know you probably think "Why using a windows app????", I agree with you but my laser printer doesn't work with Mac OS X (I hate Develop ineo 164 ..).
Can you help me please?
Thank you
Carmelo

Mike,
Thanks for the reply. Are you talking about 128-bit AES and the like? If that's the case, it changes depending on the type of file I choose (3.0 PDF is 40-bit RC4, 5.0 PDF is 128-bit RC4 and so forth).
I don't see any other options for encoding available. Could you be more specific? Sorry. I'm a relatively new Adobe Pro user.
Thanks again.

TS1538 I have an iPod Touch IOS 4.2.1 that Windows 7 home premium can't see. Says there's a driver problem. My other one with IOS 5.1.1 works on the same cable and computer. I don't know where to go.

I have an iPod Touch with 4.2.1 that won't connect to my Windows 7 Home Premium laptop. It gives a "USB Device Not Recognized" error when I plug it in to a USB port. My wife's (newer) iPod Touch with IOS 5.1.1 works just fine with no errors. I'm using the same port - I just moved the cable from one iPod to the other. I've tried the various different drivers using Update Drivers. I let it search the internet and it says "The best driver software is already installed", but the device shows as "Unknown Device". I did the browse my computer, unchecked the "Show compatible hardware", and selected Apple, Inc.. There were two Apple iPod USB Drivers. One was 6.0.9999.53 and the other was 6.0.9999.61. Neither of these works. I'm thinking that the maybe I need to upgrade the iPod touch software version - but I don't know how to get to it. Can this be loaded over WiFi? Any other ideas?

Does the iPod work OK?
Does it charge when connect to the computer?
Does it appear in My Computer?
Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
http://support.apple.com/kb/HT1353#iPod_touch_late2009
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

My computer shuts down with an "unrepairable hardware problem" when burning a DVD with Premier Elements 10

What causes my computer to shut down with a hardware problem while burning a video to DVD from Premier Elements 10?

air traffic controller
What computer operating system is your Premiere Elements 10 running on?
If not asked before, what video card/graphics card does your computer use? NVIDIA GeForce? If so, please read Announcement at top of this forum describing the Premiere Elements 10 NVIDIA GeForce issue and related how to solution information.
Please review the Adobe document dealing with troubleshooting burn to disc issues
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-system-errors-freezes-burning.htm l
After that, we can decide what next if necessary.
If any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Two specific problems and two other questions with Razr Maxx and ICS

Like everyone else, I dl'd ICS this weekend and I've (re)setup things which were there and navigated around fairly well. However, I've noticed a few things to which I can't find an answer.
1.) I have my phone locked via an onscreen password. Before ICS (i.e with GB), when I typed the password, it would not flash the letters/numbers in blue (or whatever color) above the keys as I typed. Now it does. Where do I find the setting so it doesn't?
2.) I have Verizon and before ICS, when I'd send a text to a non-Vzn. user, I'd always get a 'broken' arrow and the delivery was always "Pending" (even though most of the time they actually received the message). When I'd send a text to a Vzn. user, a 'solid' arrow would appear and the Report would show "Received".
Now, no matter if they're a non-Vzn. or a Vzn. user, it never shows "Received". It always shows "Pending".
Is that a bug in the ICS or Vzn. or a combination of both (and does anybody else have that problem, and if so, is there a way to fix it)?
3.) On the top, where it shows '1X' (i.e. 2G), 3G or 4G/LTE, what's the difference between when it appears white color and a blue color?
One other thing - does anybody else notice the on-screen keyboard is different now?
Thanks for anyone's help - I appreciate it.

That Option isn't Available! You can't Mark it Solved any More But you can Give Points as (Correct & Helpful Answers):
That option Went a way when moved From Lithium to Jive.!
Actions
Edit
Move
View as PDF
Receive email notifications
Stop tracking
Legend
Correct Answers - 4 points
Helpful Answers - 2 points
Update: To answer this Further Correct Answers would probably be the Equivalent to Marked Solved But only the OP would be able to Do this and the Post would have to set up as Question type of Post..

HT4061 I tried to update dictionary but couldn't do so and it got hanged up the icon on my mobile screen shows waiting i can't delete it as it is not installed also same waiting problems appears some other programs please tell me how delete this shoes wai

Please let me know over come this problem

Try to restart your phone by holding the sleep/wake and home buttons until the phone turns off ignoring the slide to power off message. Then press the sleep/wake button to turn it back on.

HELP INSTALLING HP 3110 PRINTER WITH 2.0 COMPOSITE USB TO WINDOWS 8 NOTEBOOK WITH USB 3.0

Need help installing HP PhotoSmart 3110 All in One Printer with USB 2.0 composite. Errors with message can't work properly with USB 3.0 which is on my new Windows 8 notebook. Read forum support doc for installing device on Windows 8 and ran Printer Install Wizard. Goes thru extracting and errors "the system can't find the file specified".
HELP please. Have deadline on project.
Thank you!

Your V5-122p-0408 comes with only 1 USB 3 port, did you try both?
If the printer worked fine on another computer then the problem most likely in on the V5.
Are you running 8 or 8.1?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Problem when importing two photo galleries with the same name. Please Help!

Hi Guys,
I'm not a pro in dreamweaver so I would appreciate if your answer wouldn't be too technical...
Anyway I have experienced a problem. Heres the sotory, I have been making a websie in DW and used Adobe Bridge CS5 to create a photo gallery SWF file that I would use for my website. The problem is that I want to use two different photo galleries on two different pages however when I save my second photo gallery in bridge, it saves every file with the exact name as the first photo gallery I created and is working fine... Thus when I try to import the photo gallery files into my website folder structure, I find that it asks me to rename them because the files from the first photo gallery are called the exact same names.. Now obviously when I try to rename them dreamweaver gets confused and goes to the wrong folder and uses the images from my first photo gallery in the second one.
So I guess my question is how can I organize my folder structure to be able to import multiple galleries without dreamweaver getting confused because bridge names all the files the same. Or how could I save the files through bridge so that they have different names and will work fine when I import into DW...
Thanks and sorry for the essay,
Patrick

#1 You cannot have two files / folders or galleries with the same name. Redo your image Galleries with different names.
#2 SWF (flash) is not visible to iPhone, iPad, iTouch, Android or other web devices that don't support Flash Player. These users will see nothing. You might wish to explore other photo gallery / slideshow options that rely on jQuery instead of Flash technology. Some links below. A Google search will reveal many others.
jQuery WOW Slider
http://wowslider.com/
jQuery Cycle
http://www.malsup.com/jquery/cycle2/
jQuery Nivo Slider
http://dev7studios.com/nivo-slider/
Nancy O.

GX60 with 7970m - same Enduro problem as in other notebooks with Enduro solution

Similar Messages

Maybe you are looking for