GX623 Windows 7 boot problem

Hi guys, i recently have to reinstall OS on my laptop, and now i am facing "really long boot" problem, all drivers are correctly installed (at least i think so), i am fighting with this problem hole day, so i am pretty mad and tired right now, hope you can give me some advice
here is a boot trace picture hope it can share some light on this
i already reinstalled windows seven 3 times today, i tried to update bios to the latest version, even re-flash EC, all with no change :(
to describe this problem, bios post goes OK, no errors, all fast and smooth, as soon i see windows logo animating on my screen my HDD "stops" working (there is no hdd activity for a long period of time) well that can be seen on trace, and then after 90 seconds (at least trace shows that) it starts booting like before, system loads, and everything is working as it should

Quote from: cTn on 06-March-10, 05:09:14
here is the boot log
Code: [Select]
Microsoft (R) Windows (R) Version 6.1 (Build 7600)
3 5 2010 22:04:56.359
Loaded driver \SystemRoot\system32\ntkrnlpa.exe
Loaded driver \SystemRoot\system32\halmacpi.dll
Loaded driver \SystemRoot\system32\kdcom.dll
Loaded driver \SystemRoot\system32\mcupdate_GenuineIntel.dll
Loaded driver \SystemRoot\system32\PSHED.dll
Loaded driver \SystemRoot\system32\BOOTVID.dll
Loaded driver \SystemRoot\system32\CLFS.SYS
Loaded driver \SystemRoot\system32\CI.dll
Loaded driver \SystemRoot\system32\drivers\Wdf01000.sys
Loaded driver \SystemRoot\system32\drivers\WDFLDR.SYS
Loaded driver \SystemRoot\system32\DRIVERS\ACPI.sys
Loaded driver \SystemRoot\system32\DRIVERS\WMILIB.SYS
Loaded driver \SystemRoot\system32\DRIVERS\msisadrv.sys
Loaded driver \SystemRoot\system32\DRIVERS\pci.sys
Loaded driver \SystemRoot\system32\DRIVERS\vdrvroot.sys
Loaded driver \SystemRoot\System32\drivers\partmgr.sys
Loaded driver \SystemRoot\system32\DRIVERS\compbatt.sys
Loaded driver \SystemRoot\system32\DRIVERS\BATTC.SYS
Loaded driver \SystemRoot\system32\DRIVERS\volmgr.sys
Loaded driver \SystemRoot\System32\drivers\volmgrx.sys
Loaded driver \SystemRoot\System32\drivers\mountmgr.sys
Loaded driver \SystemRoot\system32\DRIVERS\atapi.sys
Loaded driver \SystemRoot\system32\DRIVERS\ataport.SYS
Loaded driver \SystemRoot\system32\DRIVERS\msahci.sys
Loaded driver \SystemRoot\system32\DRIVERS\PCIIDEX.SYS
Loaded driver \SystemRoot\system32\DRIVERS\amdxata.sys
Loaded driver \SystemRoot\system32\drivers\fltmgr.sys
Loaded driver \SystemRoot\system32\drivers\fileinfo.sys
Loaded driver \SystemRoot\System32\Drivers\Ntfs.sys
Loaded driver \SystemRoot\System32\Drivers\msrpc.sys
Loaded driver \SystemRoot\System32\Drivers\ksecdd.sys
Loaded driver \SystemRoot\System32\Drivers\cng.sys
Loaded driver \SystemRoot\System32\drivers\pcw.sys
Loaded driver \SystemRoot\System32\Drivers\Fs_Rec.sys
Loaded driver \SystemRoot\system32\drivers\ndis.sys
Loaded driver \SystemRoot\system32\drivers\NETIO.SYS
Loaded driver \SystemRoot\System32\Drivers\ksecpkg.sys
Loaded driver \SystemRoot\System32\drivers\tcpip.sys
Loaded driver \SystemRoot\System32\drivers\fwpkclnt.sys
Loaded driver \SystemRoot\system32\DRIVERS\vmstorfl.sys
Loaded driver \SystemRoot\system32\DRIVERS\volsnap.sys
Loaded driver \SystemRoot\System32\Drivers\spldr.sys
Loaded driver \SystemRoot\System32\drivers\rdyboost.sys
Loaded driver \SystemRoot\System32\Drivers\mup.sys
Loaded driver \SystemRoot\System32\drivers\hwpolicy.sys
Loaded driver \SystemRoot\System32\DRIVERS\fvevol.sys
Loaded driver \SystemRoot\system32\DRIVERS\disk.sys
Loaded driver \SystemRoot\system32\DRIVERS\CLASSPNP.SYS
Loaded driver \SystemRoot\system32\DRIVERS\cdrom.sys
Loaded driver \SystemRoot\System32\Drivers\Null.SYS
Loaded driver \SystemRoot\System32\Drivers\Beep.SYS
Loaded driver \SystemRoot\system32\DRIVERS\ehdrv.sys
Loaded driver \SystemRoot\System32\drivers\vga.sys
Loaded driver \SystemRoot\System32\DRIVERS\RDPCDD.sys
Loaded driver \SystemRoot\system32\drivers\rdpencdd.sys
Loaded driver \SystemRoot\system32\drivers\rdprefmp.sys
Loaded driver \SystemRoot\System32\Drivers\Msfs.SYS
Loaded driver \SystemRoot\System32\Drivers\Npfs.SYS
Loaded driver \SystemRoot\system32\DRIVERS\tdx.sys
Loaded driver \SystemRoot\system32\drivers\afd.sys
Loaded driver \SystemRoot\System32\DRIVERS\netbt.sys
Loaded driver \SystemRoot\system32\DRIVERS\wfplwf.sys
Loaded driver \SystemRoot\system32\DRIVERS\pacer.sys
Loaded driver \SystemRoot\system32\DRIVERS\vwififlt.sys
Loaded driver \SystemRoot\system32\DRIVERS\netbios.sys
Loaded driver \SystemRoot\system32\DRIVERS\wanarp.sys
Loaded driver \SystemRoot\system32\DRIVERS\termdd.sys
Loaded driver \SystemRoot\system32\DRIVERS\rdbss.sys
Loaded driver \SystemRoot\system32\drivers\nsiproxy.sys
Loaded driver \SystemRoot\system32\DRIVERS\mssmbios.sys
Loaded driver \SystemRoot\System32\drivers\discache.sys
Loaded driver \SystemRoot\system32\drivers\csc.sys
Loaded driver \SystemRoot\System32\Drivers\dfsc.sys
Loaded driver \SystemRoot\system32\DRIVERS\blbdrive.sys
Loaded driver \SystemRoot\system32\DRIVERS\tunnel.sys
Loaded driver \SystemRoot\system32\DRIVERS\intelppm.sys
Loaded driver \SystemRoot\System32\drivers\dxgkrnl.sys
Loaded driver \SystemRoot\system32\DRIVERS\atikmdag.sys
Loaded driver \SystemRoot\system32\DRIVERS\HDAudBus.sys
Loaded driver \SystemRoot\system32\DRIVERS\usbuhci.sys
Loaded driver \SystemRoot\system32\DRIVERS\usbehci.sys
Loaded driver \SystemRoot\system32\DRIVERS\Rt86win7.sys
Loaded driver \SystemRoot\system32\DRIVERS\NETw5s32.sys
Loaded driver \SystemRoot\system32\DRIVERS\vwifibus.sys
Loaded driver \SystemRoot\system32\DRIVERS\1394ohci.sys
Loaded driver \SystemRoot\system32\DRIVERS\jmcr.sys
Loaded driver \SystemRoot\system32\DRIVERS\i8042prt.sys
Loaded driver \SystemRoot\system32\DRIVERS\kbdclass.sys
Loaded driver \SystemRoot\system32\DRIVERS\mouclass.sys
Loaded driver \SystemRoot\system32\DRIVERS\CmBatt.sys
Loaded driver \SystemRoot\system32\DRIVERS\wmiacpi.sys
Loaded driver \SystemRoot\system32\DRIVERS\enecir.sys
Loaded driver \SystemRoot\system32\DRIVERS\CompositeBus.sys
Loaded driver \SystemRoot\system32\DRIVERS\AgileVpn.sys
Loaded driver \SystemRoot\system32\DRIVERS\rasl2tp.sys
Loaded driver \SystemRoot\system32\DRIVERS\ndistapi.sys
Loaded driver \SystemRoot\system32\DRIVERS\ndiswan.sys
Loaded driver \SystemRoot\system32\DRIVERS\raspppoe.sys
Loaded driver \SystemRoot\system32\DRIVERS\raspptp.sys
Loaded driver \SystemRoot\system32\DRIVERS\rassstp.sys
Loaded driver \SystemRoot\system32\DRIVERS\rdpbus.sys
Loaded driver \SystemRoot\system32\DRIVERS\swenum.sys
Loaded driver \SystemRoot\system32\DRIVERS\circlass.sys
Loaded driver \SystemRoot\system32\DRIVERS\umbus.sys
Did not load driver \SystemRoot\System32\drivers\vga.sys
Loaded driver \SystemRoot\system32\DRIVERS\usbhub.sys
Loaded driver \SystemRoot\System32\Drivers\NDProxy.SYS
Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
Loaded driver \SystemRoot\system32\drivers\HdAudio.sys
Loaded driver \SystemRoot\system32\drivers\RTKVHDA.sys
Loaded driver \SystemRoot\system32\DRIVERS\AGRSM.sys
Loaded driver \SystemRoot\system32\drivers\modem.sys
Loaded driver \SystemRoot\system32\DRIVERS\hidir.sys
Loaded driver \SystemRoot\system32\DRIVERS\kbdhid.sys
Loaded driver \SystemRoot\system32\DRIVERS\mouhid.sys
Loaded driver \SystemRoot\system32\DRIVERS\monitor.sys
Loaded driver \SystemRoot\system32\DRIVERS\hidusb.sys
Loaded driver \SystemRoot\system32\drivers\luafv.sys
Loaded driver \SystemRoot\system32\DRIVERS\eamon.sys
Loaded driver \SystemRoot\system32\DRIVERS\lltdio.sys
Loaded driver \SystemRoot\system32\DRIVERS\nwifi.sys
Loaded driver \SystemRoot\system32\DRIVERS\ndisuio.sys
Loaded driver \SystemRoot\system32\DRIVERS\rspndr.sys
Loaded driver \SystemRoot\system32\drivers\HTTP.sys
Loaded driver \SystemRoot\system32\DRIVERS\bowser.sys
Loaded driver \SystemRoot\System32\drivers\mpsdrv.sys
Loaded driver \SystemRoot\system32\DRIVERS\mrxsmb.sys
Loaded driver \SystemRoot\system32\DRIVERS\mrxsmb10.sys
Loaded driver \SystemRoot\system32\DRIVERS\mrxsmb20.sys
Did not load driver \SystemRoot\system32\DRIVERS\parport.sys
Loaded driver \SystemRoot\system32\DRIVERS\epfwwfpr.sys
Loaded driver \SystemRoot\system32\drivers\peauth.sys
Loaded driver \SystemRoot\System32\Drivers\secdrv.SYS
Loaded driver \SystemRoot\System32\DRIVERS\srvnet.sys
Loaded driver \SystemRoot\System32\drivers\tcpipreg.sys
Loaded driver \SystemRoot\System32\DRIVERS\srv2.sys
Loaded driver \SystemRoot\System32\DRIVERS\srv.sys
Did not load driver \SystemRoot\System32\DRIVERS\srv.sys
Use this one: http://www.clockmod.com/index.php?/products/downloads/winbootinfo_1.0
then "export log to file"

Similar Messages

Windows 2000 boot problem

I have just moved my system to the new MX-6585 board - Did an Windows 2000 "upgrade" to initiate total hardware scan.
System works ok, when it has booted, but booting is sooo slow.
Found a Microsoft article describing the problem:
SYMPTOMS
After you choose to start Windows from the Boot menu, you may experience a long delay (or pause) before your computer finishes starting. Note that this delay may range from 10 seconds to a minute. Also, this delay occurs before the Starting Windows progress bar appears, and your computer may appear to stop responding (hang) during this time.
CAUSE
This behavior can occur if Windows is installed on a drive or a partition to which Windows cannot gain access with normal Basic Input/Output System (BIOS) INT-13 or INT-13 extension calls. When Windows Setup determines it cannot use BIOS calls to start, it uses scsi() or signature() syntax in the Boot.ini file instead of multi() syntax.
My question is: Does MX-6585/BIOS in any way hinder the INT-13 calls to my Adaptec 2940???

Thanks! I sent the following message:
There are no IDE devices in my system, only SCSI. My hd is an IBM Ultrastar 36XP DRHS-36D. When I start the system up, the SCSI & MSI BIOS screens display normally, then BOOT.INI appears. After I select one of my NT-type OS's (NT4, W2K, WXP), there is a 30-second delay between the time I press the Enter key at the BOOT.INI screen and the time the OS actually starts to boot. (The BOOT.INI countdown time is limited to 5 seconds. I am *not* talking about this time.)
Since the same hardware was transferred from another installation (with a non-MSI mb) in which the same Adaptec drivers were used but this 30-second delay did not occur, the delay appears to be due to the MSI BIOS. Interestingly, W98 is also installed on this hd and it appears in the BOOT.INI list. When I start up W98, the 30-second delay does not occur -- as soon as I press the Enter key, W98 starts to boot.
Other end users have complained about this same boot delay. See the post "Windows 2000 boot problem" found in the MSI user forum here: http://www.msi.com.tw/program/e_service/forum/viewindex.php?threadid=6970&boardid=10&page=1
I'd estimate our chances of success at 1%. Still, it's far better to complain and not be heard than never complain. That way, we get to complain even more.

K8N Neo2 Windows XP Boot problems

I've recently built a new machine based on the K8N Neo 2 & Athlon 64 3500 and am having intermittant problems during boot into Windows XP.
Basically the machine seems to hang just as it gets to the 'Windows XP' logo. The screen looks blank, but if you look very carefully the logo is displayed very faintly. I have tried connecting the startup disk to both SATA1 and SATA3 with the same results as at first I thought it may be some kind of driver problem. I didn't have to install any SATA drivers during the XP install which surprised me.
I have also run Memtest86 on the two sticks of 512Mb PC3200 Geil Ram which seemed to test OK.
Once running the machine is stable, its just annoying that it may take 2 or 3 tries to get it up and running.
Any help or suggestions would be very much appreciated.
The full spec of the machine is as follows:
K8N Neo 2
Athlon 64 3500
Geil Value PC3200 512Mb x2
Maxtor Diamond Max 9 80Gb (Boot Disk)
Maxtor Diamond Max 10 200Gb
Sapphire ATI Radeon 9600XT
Andi

I will not install the nForce IDE drivers on the (I guess soon) reinstall. I've read that the PS/2 keyboard also could be the badguy in this weird boot problem but I cant understand why and how the keyboard could add time to the bootup sequence only sometimes, I guess that it has something to do with the XP keyboard driver ??..
Anyone with any other tips is welcome. Other than this weird problem my system runs perfect. MSI Core Center now tells me that my CPU temp is 45% (CPU speed 1004) (Downloading stuff but not doing anything else), CPU speed is according to XP 1.79Ghz and I use the Cool 'n' Quiet function, On what temp should I start to become alarmed and is there some way to setup something in the bios to shut down or warn me when and if the CPU gets to hot ?..
Thanks for helping a new MSI user out

Windows 7 boot problems after partitioning Mac Disc

Hi
I got a big Problem. I installed Windows 7 with Bootcamp. I have a 600Gb Mac Partition and a 150Gb Bootcamp Partition.
After Configuring Windows, I switched to the Mac OSX Snow Leopard System. I changed the Main Partition of 600Gb into 3 smaller ones. After this change I can't boot Windows 7 anymore. With the Option Key it doesn't show me the Bootcamp Partition. In the Sys. Preferences under Startup Disk it show me the Windows on Bootcamp Partition, but when I click restart, it shows me only the No System Disk Boot black screen.
I read a bit in the forum, but I haven't found the problem yet.
Thx for your help
NESTi

Your problem is quite clear and simple: you added and changed the parition numbers and table.
You want a linux style with a slice for swap, root, usr and data?
Use Mac's new Recovery - command d on startup.
Enable viewing hidden partitions in Disk Utility.
Use Windows DVD to fix and edit BCD
What you did is not supported. I know XP can't boot unless it is partition #4 or lower.
There is 200MB GPT, 128MB EFI, HFS+ 600GB would have been 3rd but GPT is zero, only now you have three where there was one.
Manage all partitions with Disk Utility in OS X
Check partition table health in Lion's Disk Utility
BCD for Windows 7 and Lion

Windows XP boot problems after latest BDM Installed

Blackberry Desktop Manager 5.0.1
Hi Everyone,
I installed Blackberry Desktop Manager on a Dell Laptop yesterday and after a reboot it took forever to boot into Windows XP SP3 and when it did the machine was completely unresponsive.
I eventually managed to get the Task Manager running and it turns out that the process called System was using 99% CPU constantly.
Safe Mode took 20 minutes to go into Windows and again windows was unresponsive to the point I was unable to open the Control Panel and uninstall BDM.
I tried Last Known Good Configuration to no avail and in the end I reinstalled the System from Scratch.
I couldn't be 100% sure it was the installation of BDM that caused the problem because Windows had installed some updates so I figured a clean install would be a wise move.
I clean installed XP and updated to SP2 and everything was working perfectly again this morning so I tried to install BDM again - same problem!!!
The system is in a state of unresponsiveness again and I am trying desperately to get into Safe Mode to uninstall BDM which will hopefully restore my PC to a working state.
Does anyone have any ideas I can try or has anyone else experienced this?
I am relatively new to the Blackberry world but I am competent with Windows XP and a manner of technical issues but this is something that is really causing me a headache.

I have had the same problem repeatedly since I first got the 'update avilable' message on my Dell xp sp3.
I've found that turning off communication speeds up the computer so that you can go to a restore point or remove the program through the windows add/remove facility. On my machine (Inspiron 6000) it is fn and f2 keys together.
I did NOT have to rebuild my system.
And thank you - I was beginning to think it was me

Satellite A660 - Windows 7 boot problem

Hi, i have i think biggest problem i ever had. I got Toshiba Satellite A660. I got Windows 7 ultimate 64bit (just to know.) The notebook freezed so i pressed to shutdown button to shut him down.
Then i was trying to start him but i saw only "Starting Windows" for more than hour.. When I was trying to use repair disc i saw only green loading bar (like loading in windows XP) but nothing happend again. So I tried to use installation disc but I only get a "Starting windows" and nothing happend, same with USB boot.
Anyone could help me?
Thanks for every post.

I understand that your computer was working and running W7 64 bit.
Can you or have you looked at the BIOS? I don't know what you can see/change but is the hard disc displayed and is the memory reported?
If you use the W7 disk or the recovery disc to boot the computer can you get to the Install Windows screen and select "Repair your Computer". If you don't see that screen you'll have to make sure the DVD or USB is the first boot device.
At this point come back for some more ideas or google for something like "windows 7 command prompt repair"

Yosemite and Bootcamp Windows 7 booting problem

Hello all,
I upgraded to Yosemite from Mavericks from the App store on a MBP 2013 late which also had windows 7 installed on it using bootcamp.
I can boot into Yosemite and Windows 7 by going to start up disk and selecting the OS and then restarting but what I cannot do is use the option key to show me the boot disk options when I power on like how I used to do before the upgrade.
Is it the same for all, is there any work around or am I doing something wrong here ?
Thanks in advance.
Priyank.

What about booting into safe mode and then uninstalling the app?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Windows 7 boot problem on Satelite L300

Hi all
I have a Satelite L300 which came with Vista and was upgraded to Windows 7 and has been working sucessfully. The otherday the laptop wouldnt bootup and and the screen offers two options boot from the recovery disk or boot normally.
The recovery disks I have are the Vista recovery disks which it want to format the hard drive. The Windows 7 disk boots up but again wants to install Windows 7.
I dont have a boot disk for Windows 7.
Can anyone suggest how I can resolve this issue with the boot sector? or advise if I reinstall Windows will it overwrite the program and data files or just the operating system?
Any advice would be appreciated.
Thanks

Hi flyal4,
Can you access the advanced boot menu of Windows? Maybe you can start Windows in safe mode
Windows 7 disk and boot disk for Windows 7 its the same. I think you got this message that you should start from Windows 7 and use the system repair function. This would be also worth a try ;)

Windows 7 boot problem

I Installed Windows 7, the installation went well. After installing and rebooting the computer. She looked as "Windows is Starting". Then thescreen goes black. The computer restarts steet every 5 minutes. Why notstart Windows properly?

I Love Any Imac wrote:
Thanks for the link. but I have long been sought by
Sought by what?

GTA 4 on windows 7 BOOT camp texture problem, macbook pro 13 january 2011 help .

GTA 4 on windows 7 BOOT camp texture problem, macbook pro 13 january 2011 help .
any
my problem looks like this
http://www.youtube.com/watch?v=PGzgS57THMo
gta 4 steam !

If GTA IV believes the system is under specification even though the computer is powerful enough to run the game with higher settings, the following will fix this problem.
This will work if your problem looks like this: "resource usage 230/60" and you can't change any other setting
Just follow the steps:
Step 1: Create a text file named ‘commandline.txt’ (without the " ")
Step 2: Put the following statement inside it:
i5 users: -availablevidmem 18.0 (with the -)
i7 users: -availablevidmem 22.0 (with the -)
Step 3: Open the main GTAIV folder (C/ program files (86)/ rockstar games/ GTA IV) and copy the commandline.txt file into it.
Step 4: locate the file "GTAIV.exe" (in GTA main folder)
Right click the file and select Properties
Under the shortcut tab, you will see an area that says Target
Modify the Target adding the command line after the last quotation mark (just add the statement you added in commandline.txt)
(remember, i5 users: -availablevidmem 18.0 / i7 users: -availablevidmem 22.0)
It should look something like this:
Make sure to add space between " and -"
I hope This helps, although late cx

[HELP] Windows 7 Boot Camp Boot Problem?

Hi,
I have a problem when booting windows 7 after installing it using bootcamp.
Here is what i did:
1) Used Boot Camp assistant to "Install Windows 7 or later version" (Last tick box option) - This also partitioned my drive.
2) While Windows 7 was installing it rebooted several times, I held the option key to select the Windows 7 instlltion disk for every reboot.
3) Once Windows 7 had finished installing I installed Boot Camp 5 for Windows 7.
However everytime I restart my Macbook Pro it boots into OSX Mavericks fine, When I go to startup disk there is no option to select the Windows 7 Boot Camp partition.
When I hold the option key while turining on my Macbook Pro I get the option to select the Windows 7 Partition, but when i select it I get a grey folder with a question mark. However when I turn on my Macbook Pro (with the Windows 7 installation disk inserted) holding the option key, when i select the Windows 7 disk it boot the Windows 7 partition fine?
I have installed reFind and tried that but I get an error: http://puu.sh/80FZt.jpg
What can I do to fix this? I want to be able to boot into Windows 7 without having the Windows 7 installation disk in the SuperDrive, and i also want to have the startup disk preferences to display the Windows 7 partition.
Thanks in Advance
Harvinder

Ok, I have done what you have both said (bobthefisherman & turbostar):
1) Deleted Windows 7 partition with BCA
2) Selected all 3 options in BCA, which created a USB install and it also partitioned my HDD
3) I waited for it to reboot and then it came up with a grey fold with a question mark in it
I never intervened with it in any way.
How do i fix this now? Any further suggestions?
Thanks
Harvinder

Windows 8.1 pro boot problems

I upgraded my OS on a hp pavilion g6-1d73us from windows 7 home premium to windows 8.1 pro and ever since I have had boot problems. I took all the software off since I thought that might be the problem but the boot problems persist. The computer's self diagnosis helps but I still have problems. Is my laptop incompatible with windows 8.1? Windows 8.1 was a download and I still have recovery disks for windows 7. I originally thought the problem was incompatible software but now I am not sure.

Hi @hifive11 ,
Thank you for visiting the HP Support Forums and Welcome. I am glad you have recovery disks for windows 7, smart thinking. I have looked into your issue about your HP Pavilion g6-1d73us Notebook and having issues with the Windows upgrade to 8.1. Here is a link to the drivers page for your product. I do notice there are drivers for Windows 8.The Updates you need for the system are the Chipset. These are located on the driver page link above.
One of the things that can cause an issue is things connected USB. The computer can not load the drivers so it causes an issue. Once the machine is up to date then return the USB devices.
Then I recommended to restore the BIOS to factory defaults.Here is a link to restore the BIOS.
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
Please note remove any and all USB devices. Disconnect all non-essential devices.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Windows 7/Boot Camp/SSD SATA3 install problems

Hi there,
I just registered to this community having bought a MacBook Pro 17" on Friday. The aim was to immediately upgrade the stock 5400 rpm drive with 120 GB SSD SATA 3 drive. I installed a brand-new Corsair Force Series 3 120gb SSD but that drive was not even recognized by the Install DVD disk utilities. So I gave up on that one. I then tried an OCZ Vertex 3 and that was recognised immediately. I managed to install Snow Leopard no problems. The problem came when I tried to install Windows 7 using Boot Camp. It's important that I can have access to Windows 7 more than OS X at the moment as I am mainly a Windows user. 12 hours later I still hadn't managed to install Windows 7 after numerous attempts. The various problems included Windows 7 unable to format the drive. Also when I did manage to install Windows 7 it never quite completed the install or would freeze on the starting Windows screen. I managed to get into the Windows 7 installation a couple of times but then the whole shebang would freeze when I tried to install the Boot Camp drivers. Upon rebooting I would not be able to boot back into the Windows partition again. I was rapidly losing the will to live. So I gave up on the OCZ SSD drive as well.
This morning as a last resort I installed an older Corsair Force Series 2 SSD 60 GB drive as an experiment. It was recognized immediately by the disk utilities unlike the Series 3 version and I managed to install Snow Leopard and Windows 7 via Boot Camp with zero problems. So it all up and running. Obviously the hard drive is much smaller than I wanted. But it proves one thing and that is that support of popular brands of SSD SATA 3 drives in the MacBook Pro 17" version is flaky to say the least and on the tests I did using two of these drives it was impossible to install Windows 7 using Boot Camp.
If anyone else has experienced similar problems I'll be interested to hear.
Regards
Kraznet

Oh yes, there are two flaky things to contend with here: the Corsair Force 3 120GB has had recall. I also have found the older 120GB didn't work properly on some motherboards and with older BIOS and Intel drivers.
Questions:
This is hopefully not an electronic EDU/MSDN ISO of Windows that you burned wtih Apple Disk Utility?
primary Windows - forget Boot Camp Assistant - just boot from OS X DVD and change the SSD to Windows MBR partition table and FAT and then format in Windows. Me, I would have bought Windows 7 SP1 64-bit System Builder.
From a hardware review reposted to Amazon:
The Corsair Force Series 3 SSDs were announced just a few weeks ago - boasting SandForce SF-2281 controllers and a very aggressive price point. Just days after the first units started shipping, Corsair has issued a recall of the 120GB Force Series 3 SSDs. According to Corsair, the 120GB model is seeing, "a significant percentage of these drive do not operate to specification." What the failure is exactly isn't clear, Corsair is quick to deflect blame from their partners, simply stating that both hardware and firmware need to be fixed.
Buyers of the Force Series 3 SSD in the 120GB capacity can return the drive to Corsair for exchange - retailers are also accepting returns. The 60GB and 240GB models are not affected. For more information on how to exchange a defective drive, visit this thread [...] in the Corsair support forums.
I'm surprised anyone is selling the Force 3 120GB (though it is on Newegg it is not on Amazon since it was pulled)
Apple has had a slew of problems with the new SATA 6G and 2011s.
http://macperformanceguide.com/blog/2011/20110607_2_MBP-ssd-howto.html
http://blog.macsales.com/page/2
the internal SATA port on the 2011 MacBook Pro is 6 gigabit. One reader installed a Crucial C300 and got 362MB/s average read speed for large sequential transfers. We're looking forward to testing the Intel 6Gb/s 510 SSD and OCZ 6Gb/s Vertex 3 which should be even faster.
http://www.barefeats.com/mbpp33.html
some other articles -
Apple Slipstreaming Dual 6GB SATA III Ports into 13/15/17" MacBook Pro — But Don’t Assume it Functions
Apple two SATA III cables 2011 MacBook Pro
04/05/11 - Apple finally working on a fix for the SATA III bug on the 2011 MacBook Pro
29/04/11 - Bug between some Vertex 3 and MacBook Pro.

Windows server 2012 R2 booting problem

I am trying to install windows 2012 R2 standard in Hp ml350 g8 Server. after completing the installation windows is not booting properly . After entering the user name and password only c:\user\administrator display in the screen . if i type exit
on it then only a black screen and mouse pointer display. kindly suggest me what to do.

can any one suggest me what to with this booting problem! is there any hardware problem or it's problem with the media as the media was downloaded from vls.my problem is that After
entering the user name and password only c:\user\administrator display in the screen . if i type exit on it then only a
black screen and mouse pointer display. In my opinion Microsoft need have to provide the media disk along with the licences and also some short of technical support free over phone. but they don't !!!

HP 250 G3 - problems with Windows 10 boot

I have problems with Windows 10 boot on my HP 250 G3. It often shutdown during boot. But boot is ok with Windows 8.1. Please release upgrade that solve this problem.

SomeoneWithAnHP wrote:
Guys this might be solution: Turn off your laptop. Disconnect all devices connected to the PC. Remove battery and disconnect from wall. Press the power button at least 20 seconds. Connect back battery and turn on your PC. It should be fixed by now, I did with my Pavilion 14, and both sleep and turning off problems were fixed.re: Black Screen and Dead keyboard after locking computer. I tried this with my Envy 17t-3200 3D CTO. Didn't help. for this computer this means removing the back cover and unplugging the battery wiring harness form the Motherboard. I currently have sleep mode disabled when on AC and am still getting the black screen, dead keyboard lockup. I really know I'm hosed since even the caps-lock is non-functional. I see this problem more when I'm at work were I tend to Win-L lock the screen when I walk away from my desk. Seems like locking the computer then letting the screen blank is doing something evil. After I force a reboot, by keyboard backlight forgets it's setitngs and returns to full brightness. If I lock the screen then bring back the computer before the screen is blanked, it seems fine. I don't think there's any way to adjust the screen blanking when the lock screen is up (even my desktop power-saves the monitors after a few minutes on the Lock screen). I'm not sure it's HP or MS that should be looking into this. My computer is about 3 years old so I can't pester HP with warranty requests. I'm not sure how prevelant this problem is. Are all Pavellions and Envy's having the problem? Mine has Radeon graphics which was a bit unusual at the time. I have to install the HP Display driver before any AMD updates or the screen dimming doesn't work (at least with win 7 and 8). Dave.

GX623 Windows 7 boot problem

Similar Messages

Maybe you are looking for