GX660 SSD Caching problem - the accelerate tab does not show

Ok so im trying to install a crucial m4 64 gb (FW 0009) into my gx660 and enable it as a ssd cache via the intel RST program. So far with no luck.I've ran into a wall and my problem is that the accelerate tab in intel rst is not showing.
Here is what i did. Hopefully in the right order.
1. I installed and updated the intel RST drivers and software.
2. I installed the ssd in the empty drive slot in the case.
2. I flashed my BIOS to the gx660r one to enable the RAID option.(before this i also found out that 1 of my 2 ramsticks where bad and i took it out)
3. I enabled RAID only to discover windows would BSOD on boot and i disabled it again (sat it back to AHCI)
4. I used these registry hacks to get RAID mode to work.
   Enable switching between all IDE/AHCI/RAID modes by changing "Start" Values in these keys to 0
         HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci\Start
         HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Pciide\Start 
         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStorV\Start
5. I re-enabled RAID mode and booted into windows perfectly
6. Then intel RST bugged on me and i reinstalled it several times. (it showed my disk as having 0 gb's of space and was only able to show their serial number)
7. I got intel RST working but it still wont show the Acellerate tab :(
At this point i got stuck when the accelerate tab still wasnt showing and now i tried making a clean install of windows (in RAID mode) on a newly created partition. Here i have the same problem.
I have also tried switching the drives places in the case but still no luck.
I have gotten to the point where im about to give up on this. Do any of you have any idea of what i've done wrong? if so please reply.

... Note to self: Do proper research. Turns out youre probably right.  According to http://www.tomshardware.com/reviews/intel-z68-express-smart-response-technology-ssd-caching,2938-3.html it is also possible on HM67 and QM67 chipsets but thats not what i have. Thought that SSD caching support was a nobrainer on laptops but turns out its not.

Similar Messages

  • HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

    I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
    I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
    I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
    Thanks,
    Toks

    Hi Toksyb!
    You may want to try clearing out the PRAM on your computer. This process is explained through this article:
    About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Trying to sync photos from iTunes (via iPhoto) to ipad and iPhone. The  Photo tab does not show up and no sync occurs

    Trying to sync photos from iphoto to ipad and iphone.  Photo tab does not show up in itunes under devices. 

    I had a similar problem (https://discussions.apple.com/message/24525903#24525903)
    The solution in my case was to start iPhoto and let it update the library, even thu itunes was set up to sync with Aperture.

  • I can no longer download in Safari.  The Download tab does not show up in toolbar any  longer. Can anyone help?

    I like to download old music videos from the 50's.  Recently the Download tap in Safari does not show up anymore.  It's as if I did something that may have deleted it.  I can't find away to get it back.  For now I've switched to my Google App which works just fine.  Any help or suggestions would be appreciated. Thanks

    Start downloading the music video.
    The Download button should appear when you start downloading anything from the web.
    If the download list is empty, download button will not be shown by default.
    Best.

  • HT1386 the summary tab DOES NOT EXIST ON THE NEW  (AND HORRIBLE) ITUNES SOFTWARE!

    the summary tab DOES NOT show up  ON THE NEW  (AND HORRIBLE) ITUNES SOFTWARE! where the heck is it???

    I found it!  After trying everything I could think of, I clicked on the left pane on iPhone and it opened it up.  Yay!!!  Why do things have to be so difficult??
    Thanks anyway!!
    I'm trying to add my Christmas playlist to my iphone but can't find where I check which playlists to synch.  I don't like the new iTunes...
    I have the left hand summary tab but I no longer get access to the icons across the top where I used to choose what synchs and what doesn't - Apps, music, etc.  How do I get that back?
    Help?  Anyone?
    Thanks!

  • Info tab does not show in iTunes 11.1.2 in iPad sync window

    I have OS 10.9 on my iMac, iOS 7.0.3 on my iPad, and I'm using iTunes 11.1.2 . I had only one problem syncing my iPad with the iTunes--the info tab does not show in the sync window. Has the method of syncing calendars changed? How can I do this

    I found the following in another discussion thread:
    If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud. For more information, see iCloud Help at icloud.com. (http://support.apple.com/kb/PH12117)
    Since I do not use cloud computing for security reasons, I will not be syncing my contacts or calendars between devices. I hope the Apple developers rethink this strategy. Meanwhile I'll figure out a work-around as I have in the past when software has an unfortunate glitch.

  • The print tab does not work in mapquest

    The print tab does not work in mapquest

    You are on the right track to getting the printer installed regarding firewall but perhaps it has saved in a different port on your computer than can communicate correctly.  Search Devices and Printers on the Windows 8 PC so you can pull up the printers' folder. Do you see the Officejet 6500 in here (meaning have you installed it again)?  If you do not see it here, check your Print Server Properties and make sure the driver is not in here either, if so remove it.  Restart the Print Spooler. Make sure you uninstall it completely and shut down the PC (see video link on how to uninstall HP drivers and restart the print spooler in Windows 8 if needed).
    Remember to re-install the Full Feature Software and Drivers (for your OS and region) when the PC reboots.  Try the test print and if it does not print:
    1. Right-click on it and select Printer Properties.  
    2. Under the Ports tab make sure you see the printer's IP address here or a serial number.  Sometimes the HP network -rediscovery ports can be tricky.  
    3. When the printer is high-lighted in this window, click Add Port.  
    4. Select Standard TCP/IP and follow the rest of the prompts in the Wizard to enter in the printer's current IP address.
    5. Try to print.
    If this does not help you, you may have other computer problems.  
    Have you ever installed a printer on this PC before?  
    What is the name of the anti-virus software you use?
    Are you on a server, proxy, or other elaborate wireless setup?  
    Answer those questions for me please if the above information does not help you. I will do my best to assist. 
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Sometimes when I open a link in a new tab, the new tab does not load the link.

    Sometimes when I open a link in a new tab, the new tab does not load the link. This seems to be random.
    Win 7 64
    FF 4.0.1

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • We have acrobat 11 and office 13.  In word the Adobe tab does not appear in the ribbon

    we have acrobat 11 and office 13.  In word the Adobe tab does not appear in the ribbon

    You have to update AA XI to work with AA 2013. You may also have to open the OFFICE tools and enable the add-ons. There is no tool in some of the OFFICE applications. You can check the list in the PDF Maker folder in Acrobat.

  • When i place my photo, the adjustments tab does not pop up, and even when i click image at the top, I cannot select any adjustments-brightness/contrast,hue-saturation, color blance, etc..Anyone know what I am doing wrong?

    When i place my photo, the adjustments tab does not pop up, and even when i click image at the top, I cannot select any adjustments-brightness/contrast,hue-saturation, color blance, etc..Anyone know what I am doing wrong?

    Good day!
    What is "place" supposed to mean – open, place as Smart Object, …?
    What are the image’s Color Mode and bit depth?
    Could you please post a screenshot with the pertinent Panels visible?
    Does Window > Adjustments not raise the Adjustments Panel?
    Regards,
    Pfaffenbichler

  • The Categories tab on my iPad 2 will not pull up the categories and the Genius tabe does not pull up anything at all.  Any thoughts on what to do?

    on my iPad 2, when I go into the iTunes store to look at apps, the categories tab will not pull up the categories list and therefore stays on my previous choice everytime and the Genius tab does not pull up anything. Please advise on how to fix.  Thanks.

    Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
    Out-of-Warranty Service
         If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below.    
    iPad model
    Out-of-Warranty Service Fee
    iPad mini
    $219
    iPad 3rd, 4th generation
    $299
    iPad 2, iPad
    $249
    A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
    You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
    iPad Repair & Screen Replacement Services
    http://www.ifixyouri.com/16-ipad-repairs
    RepairZoom iPad Repair
    http://www.repairzoom.com/ipad-repair.html
    Mission Repair
    http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
    iGadgetResQ
    http://www.igadgetresq.com/ipad-repair/
     Cheers, Tom

  • The fist tab does not finish loading - it keeps on loading and loading.

    Since the latest Firefox update, the first tab does not load! It keeps on loading and loading. The first tab also does not want to close. '''So the first tab does not load and it does not close! '''All other tabs load and close. This happens when I open new tabs or when FF opens previous sessions.

    On further attempts. I believe that my earlier post was not the correct description. What I have found is that when Firefox is closed with a web page open on its first tab, the next attempt to open Firefox will cause the symptoms that Lorraine was talking about earlier. After that back keys don't work. This is not an extension issue. I believe that this is a Firefox issue.

  • Tab does not show when dragged into it's own new window

    This happened after I updated to Firefox 8.0.1. Same problem with 9.0.1. I'm on a Mac running OS X 10.5.8. I have not changed any add-ons, plugins, extensions, or anything like that.
    Every time a tab is dragged from my main window to form it's own new window, the tab button on the new window does not appear. I only have a + sign showing.
    A tab will show when I open a new tab, but the original "tab" does not appear. The + sign also appears on the left side of all new tabs. Isn't it supposed to be on the right?
    If I have 2 "tabs" open but only have 1 tab showing and try to close the window, Firefox asks me if I'm sure I want to close the 2 tabs.
    Tabs when opening blank new windows work properly. Dragging a tab to an already opened window works fine as well.
    Most of the time a tab is dragged out on accident, and it is quite annoying because I can't drag it back into the main window.
    Any help or suggestions would be greatly appreciated.
    Many Thanks!

    I found the cause but no solution, it's actually a plugin that does that: divx plus weblpayer (it gets installed when you install DivX on your system), if you disable it and restart firefox it all works again. But I want that plugin... so DivX need to fix this, unless it is a Firefox bug in its own core... anyway these two together creates the problem.
    (I'm running Firefox 9.x on OSX Lion)
    I also wish firefox tab tear out tab worked more like chrome's tab tear out, much friendlier...

  • HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    There is a hardware problem.  Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

  • I have a Ipod touch and recently added new music to my itunes library on my laptop. When I sync with my ipod, the new music does not show up on my ipod even though the sync process seems to be working.

    I have an Ipod touch and recently added new music to my Itunes library. When I sync with the library, the new music does not show up on my ipod. The sync process seems to be working and there is still plenty of space on the Ipod for new music so I'm not sure what the problem is!

    What happens when you try to sync?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    Do the songs play in iTunes?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod        
    Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs?

Maybe you are looking for