GX720 Turbo drive Vista x64 CPU get freezed

I have installed SCM from web side and when I press turbo button, my notebook is freezed and I have to turn it off woth TURNOFF button and hold it.
How can I solve this problem with overclocking button and this function?
I saw that SCM is for 32bit syste. Does anybody have for x64? Thank you for ur answers

Quote from: le_tired on 13-September-09, 23:58:25
Anybody with Vista x64 and without problems of Turbo button/function? reply pls
Just as I posted in this previouse thread - https://forum-en.msi.com/index.php?PHPSESSID=5313fd8a380daf24a643bf3d121efc72&topic=127924.0
I have Vista Home Premium 64 bit installed with no issues. When I hit the turbo button it doesn't freeze. Turbo button lights up & I assume
it's working but I never really run anything in turbo mode.

Similar Messages

LR 1.3.1 freezes with Vista x64

Forgive me if this has been covered. I searched, but could not find anything.
I just did a clean install of Vista 64 (moved from XP), and a clean install of LR 1.3.1.
LR is freezing any time I open a "choose folder" dialog box. Normally (on XP), LR would open the "choose folder" dialog, and let me browse around and select a folder (for save/open, etc). But on Vista x64 it completely freezes, and I have to kill the LR process.
An example of where this dialog is used:
When I launch LR, it asks me if I want to backup the library. From the backup dialog, I can "choose the location" of the backup. When I click to choose the location, the "choose folder" dialog box comes up. It does not show any contents within it (no directory structure is listed), and now LR is completely frozen - no way out.
Has anyone else seen this on Vista x64? Is this a known issue? Any ideas on how to fix this?
Thanks,
Mike

A quick update...
Turns out that LR isn't frozen on the "choose folder" dialog box. It just sits for a long time, and then eventually displays the folders and everything works fine. The delay seems to be about 1-2 minutes, and then everything works.
And it doesn't happen every time I use that dialog box. But it seems to happen the first time I initiate that dialog from any particular module/function within LR (Export, Import, etc).
Mike

Cannot install Photoshop CS4 Trial on Vista x64

Hi everyone,
I got a big problem, I download the Photoshop Extended Trial Version and extracted it without any problem. But when I double-click setup.exe nothing happens. It seems to popup a window, but its gone every fast. When I open the Taskmanager I can see the setup.exe under processes, but nothing happens also after hours of waiting.
My PC:
Intel E8400
4 Gb G.Skill DDR1000
Gigabyte P35-DS3
Gecube HD3780 X-Turbo
Windows Vista x64 Ultimate
C: (NTFS) 94800 MB (18418 MB frei)
H: (NTFS) 61440 MB (27418 MB frei) <--- here I extracted the Folder
What I had tried beforce:
- Installing in safe-mode = same problem
- register jscript.dll myself = same problem
- Uninstall CS3 = same problem
- Using AdobeCS3Cleaner
- Using AdobeCS3Cleaner -> found nothing...
- delete last things of CS3 with TuneUp

Peter,
To avoid complications, I would have uninstalled the trial first, then run the Adobe clean-up script, followed by the installation of the full version using the default location.
This has both a 32 bit and a 64 bit component, installed as follows:
32 bit C:\Program Files (x86)\Adobe\Adobe Photoshop CS4
64 bit C:\Program Files\Adobe\Adobe Photoshop CS4 (64 Bit*)
The 64 bit version will be the default on a 64 bit OS.
In your situation I would uninstall everything related to CS4, run the Adobe clean-up script and start again.
* Adobe should note that
bits have a small
b and Bytes have a big one!

New D20, Windows 7/Vista can't see hard drives - also 2nd CPU questions

I just got a new D20 and aded a few 1TB Samsung hard drives to the WD one that came with it. I can see the drives fine in both the Marvell BIOS RAID setup utility (even ran a Verify Disk on them with no errors) and from the ThinkStation BIOS and even from a Linux-based utility that I used to partition and format them with. But neither Windows 7 RC nor Vista x64 Ultimate can see any of the drives and when I try to load drivers fro the driver CD that came with it, they aren't recognized or loaded. Probably there is a simply BIOS setting I've screwed up but it has me stumped. Any clues?
Also the machine came with one dual-core E5502 CPU. If I want to add a 2nd CPU does it also have to be the same as the 1st or can I add a quad-core E5504 or even a higher speed quad-core as long as it is a LGA1366? Does it have to be a Xeon or would an i7 work?
Many thanks in advance!
ThinkStations: D10, D20, and S20
ThinkCentres: S50, M51, A61e
ThinkPads: W520, X60T and X61T SXGA+ tablets

welcome to the forum!
sounds like that D20 arrived in one piece.
the latest marvell driver for vista 64 can be found here. i suggest trying that first to make sure this isn't a driver issue. also check that you have the intel chipset and matrix storage drivers installed. they can be found here.
check the BIOS and see if the AHCI mode is set to SATA RAID. i can't remember the exact path to this setting right now but can reboot and write it down if you get lost.
on the processor, the second one does have to match the first unless you replace the first completely and install two new chips. an i7 might work as a single processor in socket 0 (this is untested so i cannot confirm). however, you'll need two xeons if you want to run two physical processors.
i suggest reading the following links for reference:
Hardware Maintenance Manual
Processor Instructions
Heat sink
Hardware Replacement Guide
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

New topic on old problem - MacBook Pro Late'08 + Vista x64 Freeze

Hi All,
I read many topics on freezes and have not found the solution. People are re-installing WiFi drivers and are solving problem with lags for audio.
I've Vista x64 SP1 installed + Bootcamp + multitouch drivers from Apple.
When I use Standard VGA drivers - system works well (not 1-2 hours, but as much as I need - up to 2 days uptime). But when I use ANY nVidia driver (modded or no) I could get freeze after 30 minutes or after 3 hours.
But I'm missing Aero + stand-by features.
So - had anybody found nVidia driver that is not crashing system?
As I understand WiFi driver is working well, because with standard video driver there are no crashes/freezes at all.

Download the latest official driver from NVidia and use an application called RIVATUNER to force a fixed performance level of "low-power 3D".
That keeps the NVidia driver from switching clock-rates and voltages dynamically and thus prevents three problems:
1. Constantly changing voltages and thus power-draw from the battery/PSU and mainboard components. This should help stability.
2. Audio dropouts (and likely other drivers and processes dropouts as well) due to extreme DPC spikes whenever clock-rates are switched.
3. Possible audio dropouts (and likely other drivers and processes dropouts as well) due to too low GPU memory clock-rates in 2D mode.
Just to clarify that, even when you are only working in 2D the NVidia drivers keeps switching performance-levels/clock-rates up and down according to what it thinks is necessary. Sometimes just opening a web-page with video content can lead to the GPU switching to performance-3D (maximum voltage and heat) just to have it clock down over several steps again (each time producing a huge DPC Latency spike).
The Microsoft Standard VGA Driver runs at constant clock-rates, thus it's less susceptible to stability and performance problems.
I am using a Latebook 2.8 Ghz with Vista 64 myself here. Can you give any hints on how to reproduce a freeze (like any specific load/software)?
Message was edited by: T1mur

NVIDIA GeForce 8600M GT driver for Vista x64

Hello,
I have an issue with my new MacBook Pro 2.4Ghz 17" that was released on the 5th of June, 2007.
It has NVIDIA GeForce 8600M GT installed on it and I simply cannot find Vista 64 bit drivers for it.
I have tried the latest beta Vista x64 drivers (163.11) downloaded from nVidia's official website. I have tried several previous versions including 100.97 one, which contains drivers for 8600M GT model. But they don't work with me. All the driver installation programs allert the following error and quit:
'The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit'.
I also tried Vista 32-bit drivers for 8600M GT. The driver installation program claims the operation system is wrong and quits.
Anybody has the same issue?
Does a working driver of nVidia GeForce 8600M GT for Vista x64 exist at all?
MacBook Pro 2.4Ghz Windows Vista nVidia GeForce 8600M GT

There was one Apple's presentstion where they boot into Windows Vista. So if you claim you can do it why do you forget about Vista x64 customers? I reckon it is because of Leopard that is coming. But it's not an excuse.
I'm currently working in Vista x64 and everything is fine except one thing, I cannot find a working graphics card driver and it is manufacturer's responsibility to provide it. Apple knew there going to be customers who will install Vista x64 on their computers and they at Apple didn't care about it because I guess it's a lame war between you know who.
So why you don't make everything perfect to attract even more Windows customers but instead you hint that you don't care about Vista x64 as you are getting your own 64-bit OS soon. So now they are forcing me to wait having been announced that I can use Vista. But isn't that kind of lame that it's slightly tardy? Why I should wait for Leopard launch if I was insured that Windows will work on my Macbook Pro? Because Apple claim you can run Windows. And don't say it's not official. Who else if not Apple made it possible to run Windows on Mac.
Don't get me wrong, I'm not trying to insult you. I'm just angry that I cannot find a working driver.
Message was edited by: Melnyk

Pc-cam 900 vista x64 driver

I need vista x64 driver for my pc-cam 900

I have same problem with Mandaraku who posted 04-20-08. Please help me too.
I have a Camara PC CAM 900 since 2005. It lost the software installation. I can not download on the site CREATIVE. Urgently need to install this chamber in my new computer. How do I get to download installation of this driver? I use Windows XP.

PC54G3 VISTA X64 FREEZE

HELLO,
Yesterday i installed windows vista x64 SP1 ultimate
and the problems starts.
1) if i use the driver of Msi i cuold not conect with my router. windows said that the password is invalid
2) if i use the last driver of ralink i can conect but.......
when i am copy and paste files to other computer my vista freeze, and i need to press reset
There is not a register of the error in vista.
please help me
Edimax wifi router br-6204wg encrypton WSA-PSK
my computer:
e2200
Gigabyte p35 ds3l
xfx 9600gt
4x1gb supertalent ddr 2 800 mhz
seagate 7200.10 250gb
Msi PC54G3
sorry for my bad english

You need to contact MSI for driver requests. http://ocss.msi.com.tw/
None of us work for MSI. Look at my signature.

PROBLEM RESOLVED: SATA RAID Vista x64 Driver Errors on P45 Platinum

I have installed 5 WD 640GB SATA drives on my P45 Platinum PC build. Using the Intel Matrix Storage BIOS program, I configured them as RAID 0 (480 GB) and RAID 5 (2 TB) volumes.
Now I am trying to install Vista (x64)--as expected, the Windows installer prompts me for a RAID driver floppy. I have downloaded the latest ICH10R drivers from the MSI Website and copied them to a USB key--the installer detects the drivers on the key but when I click Next, I get the following error message: "No new devices could be found. make sure the driver files are correct and loaded on the driver installation media."
Can anybody help--I'm fresh out of ideas?
The P45 Platinum board is a rev 1.1. I have not flashed the BIOS so I suspect that it is v1.0 but am not sure how to confirm this.

Quote from: Jack the Newbie on 30-October-08, 17:39:54
When one of the board's controllers is set to RAID mode, it does not even matter if there are actually hard drivers connected to it, or not. Vista is not attempting to locate a RAID volume but simply needs proper drivers to be able to initialize the controller.
OK, makes sense. So when Vista was prompting me for drivers it was actually looking for the JMicron RAID drivers NOT the Intel RAID drivers. When I tried to install the Intel RAID drivers it--naturally--gave an error message.
It seems that it is no longer necessary to install Intel RAID drivers when you install Vista as these are already available to the OS (must be on the DVD).

Vista X64 Drive Management Snap-In Error with SD Cards

I have someone with an W700, 2752-3KG, running Vista X64, raid 1 configuration with factory image. The system also has a VM with XPP X86 in case it proves relevant.
Everything works like a dream, except for one thing which has got us completely stumped. When an SD card is inserted it is recognized as new hardware as expected. There is no autorun, i.e. Open folder / play music window, as this was disabled when the VM was set up. In drive management the SD card will be shown, but alas not assigned a drive letter. Any attempt to assign a drive letter results in the following message; (translated from German to English using translate.google.com)
"The operation could not be completed because the view
of the Disk Management snap-ins is not current. Refresh your view with the
update task. If the problem persists, close the Disk Management snap-in, and
then restart the Disk Management snap-in or the computer."
[Original screenshot attached 203KB]
The usual routine of updating / rolling back of drivers, uninstalling the hardware etc. etc has been tried to no avail.
The SD cards work fine on other TPs including W700s with Vista X64, X86 and XPP X86, they also work fine on this system when using an USB card reader
What hasn't been tried is running a recovery to another hdd. As the system is used daily this would mean blowing part of a weekend. And if a weekend is going to be partly blown, then I'd rather blow it completely and reinstall everything from scratch which would be a shame because, as previously stated, everything else is running 110%.
Has anyone experienced similar? Any ideas? I've searched MS thoroughly without finding anything
Thanks in advance
Edit; Typo
Message Edited by andyP on 04-20-2009 10:10 PM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog
Attachments:
snapinerror.jpg ‏204 KB

You may want to try a few different SD cards, there are apparently some which do not play well with Vista.
Personally I haven't had any issues with a 2GB SanDisk SD card running as ReadyBoost in an X61 under Vista Ultimate x64.
Cheers,
Bill
I don't work for Lenovo

Vista x64, Dell Laptop Lately I have been getting audio ads from Lysol etc which I can stop by deleting the process plug-in container Iknow how to delete this process but why does the audio ad run despite the application of two well known antivirus progs?

Vista x64, Dell Laptop Lately I have been getting audio ads from Lysol etc which I can stop by deleting the process plug-in container Iknow how to delete this process but why does the audio ad run despite the application of two well known antivirus progs?

Oh, PLEASE IGNORE the line:
deleted everything under HKLM\SYSTEM\CurrentControlSet\Enum\Root\SYSTEM (folders 0000 to 0004)
That was left there inadvertedly. Can't seem to find the edit button here...

[Vista x64] Microphone problems with X-Fi and 2.15 drive

Hi guys,?I'm having a problem with the 2.5 drivers on my X-Fi Platinum card, under Vista x64. It seems the microphone inputs (both on the card and on the breakout box) have problems, any recordings stutter and pop rapidly, making any recordings (or voice chat)?quite useless. This issue doesn't occur with the 2.3 drivers. Is there any known solution to this problem yet?My system: e6600 CPU, Asus P5W-DH motherboard (975X chipset), 4GB RAM, 8800GTX, X-Fi Platinum. Thanks.

hey Darkman,
since I never had this problem with installing this software, I cant really tell whats wrong, but you dont need it anyway to use the x-fi.
but you may want to try one thing, since it crashes at 27% something may still be in use, so check your task manager and close everything that has CT in its name. then try reinstalling again. If that still doesnt work, try to empty your temp folder, its located in documents and settings/user you are/local settings/temp
if that still doesnt work, try maybe something stupid, wait a bit longer than usual and keep the install window in the front to watch the process, maybe your pc is just a bit slowed down by other software so it may take longer than normal

Getting static audio with Titanium and Vista x64 at random times

@Getting static audio with Titanium and Vista x64 at random times$ I have had this card for about 6-8 months and relati'vely no issues.
I just upgraded to the latest drivers 270006 and now, sometimes after exiting Turbine's Lotro, my audio plays but is very static-y, but it doesn't happen all the time. I had iTunes minimized when playing Lotro and then went to play a song after exiting. I quit iTunes and tried it again and it was ok.
This also happened in Firefox, a YouTube video had the same static audio.
It doesn't happen all the time and I do play other games, but I haven't been playing much else right now.
So right now I don't know if it's a Lotro thing or just the drivers.
I have a Q9650, single GTX260, Asus P35 board (not SLI), Vista x64, 4GB.

Carl, do let us know on the Safe Mode test... would be the first thing I'd try with what you've mentioned, but yeah, daisy chained Hubs could possibly play into it.

Satelite A300-1GN and Vista x64 driver support

Hi,
I am (happy?) owner of this model for 2 days.
However it seemes logically that if this notebook can support up to 8GB RAM (i bought with 4GB) there should be possibility to install x64 operating system.
It seems, but it's not like I see. There are no drivers for x64 MS Systems on Toshiba official website to download.
Well, I am able to understand you do not want to support Win XP x64, because this system is getting older.
I can not understand how it's possible that every large company supports Vista x64 for their devices and Toshiba do not.
It seems perverse that you do not deliver suitable drivers and I really can't believe that.
I am wonder and i hope the main reason is that product I own is a new model and the drivers appears soon.
E.g. Satelite A200 has x64 support despite its a lower and weaker model...
I hope we can expect that our doubts will be explaining, and Toshiba will not slight their custommers longer, but will incline to our requests.
If I am mistaking of looking for needed drivers, then want to apologize for my post,
but if I am not wrong I will be satisfied to hear rational answer and ensure that the drivers will comming soon!
regards
Kuba

Well I really hope it will be.
Mabye can you tell me how long does it usually take to support the drivers for 64bit systems for new model by toshiba?
If I will have to wait e.g. 2 years there will be no sense to wait for them. If does it usually take about few months I will be waiting carefully.
Or mabye somebody can give me advice if there is a sense trying to find needed drivers on devics producers sites?
Finally my question is, if models having nearly the same devices and configurations like sat a300-1GN and sat a300-15B are probably using the same drivers?
If there are the same graphic cards the same webcam the same loudspeaker? :)
Is there any sense to try drivers for this devices for sat a200 series?
I am sure i will try to install Vista x64 for few days so i am satisfied for all tips i will get here.
Greetings,
Kuba

State of Vista x64 Driv

I'm getting a new motherboard tomorrow so I'll need to reinstall Windows. ive been using Vista 32 off and on since Feb 07, and after SP and the March 08 Creative drivers it's been good enough for my needs that I haven't needed to boot XP. There are still warts, but no showstoppers for my needs.
If I'm going to reinstall I'd like to go x64. ive got 4GB RAM, and I'd like to be able to use it. I really don't need it since all my programs that matter (games mostly) are still 32 bit. It's mostly because I can and I don't really want to reinstall again soon should a 64 bit capable game I want comes out in the near future. I have no 6 bit stuff that matters, so thats not an issue.
Most of my games use OpenAL, otherwise I'd just use the motherboard sound. I play the Battlefield games, WoW, GRAW, UT, All the Half-Life games, Quake series... you get the idea.
My Question is pretty simple, albeit subjective. How are the Creative drivers for Vista x64. It's an Intel P35 chipset, GeForce 9600GT video, and X-Fi Gamer. Any specific gotchas on the new Beta drivers I understand Cmss3d is an issue, but if thats really the only thing I can probably deal with that for a while assuming it'll be fixed (leap of faith there).
Kind of a vague question, and definately subjective. I'm just fishing for experiences before I reformat. Bonus cookie for anyone running dual-boot x86 and x64 on the same computer with a story.

Ellimist wrote:
vista x64 drivers are far and ahead of 32bit drivers as they have to be signed and they are alot more controlled.
That's just BS. Just because they have to be signed doesn't make them any better.
Ellimist wrote:
I've found as long as all your hardware is recent then theres no issue with x64 os's its when u want weird stuff that you will get problems. the creative drivers are stable
l myself still have problems with the microphone not working in game mode.
Ellimist wrote:
use Daniel_K vista drivers cd if u can as theres some enhancements there. that and they can also be made to do DDL
DDL was removed from the Daniel_K drivers AFAIK.
Ellimist wrote:
nVIDIA drivers are quite stable on x64 i've found and usually the few bugs i've encountered have now all been fixed with the latest release. i never noticed bluescreens in x64 so i can't comment on the nVIDIA drivers causing them.
l often get bluescreens in DX0 games.
Message Edited by heftig on 06-04-2008 06:42 AM

GX720 Turbo drive Vista x64 CPU get freezed

Similar Messages

Maybe you are looking for