Gyroscope and Vibration ANE need update too

Hello,
Do you know if these 2 ANE will be updated with 64 bits support ?
I need them to make an update of my iOS app with Air 16 beta, i think i'm not the only one
Thank you,
regards

Hi
We have now re-packaged all the 3 ANEs, namely NetworkInfo, Vibration, Gyroscope with 64-bit universal support. These are in addition to the Gaming SDK ANEs which we had shared earlier.
The updated ANEs can be downloaded from the respective devnet articles mentioned below:
http://www.adobe.com/devnet/air/native-extensions-for-air/extensions/networkinfo.html
http://www.adobe.com/devnet/air/native-extensions-for-air/extensions/vibration.html
http://www.adobe.com/devnet/air/native-extensions-for-air/extensions/gyroscope.html
Regards
Abhinav

Similar Messages

My ipod touch is telling me that the skype and twitter apps need updating. When I try to run them they fail. I have tried deleting the apps via itunes but it doesn't work and I have tried updating the apps via itunes and it says they are updated.

My ipod touch is telling me that the Skype and Twitter apps need updating. When I try to update them they both fail. I have tried numerous times. I have tried connecting the ipod to itunes and removing the apps, to reload them but that does not work either. If I try and update the apps through itunes the system tells me they are updated. Can anyone assist please?

- Try a reset. It cures amny ills
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Have you tried deleting them from the iPod and then redownloading them dorectly to the iPod?
Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT4623 When an app is download with one apple id and later on needs update thn how to update with other apple if ist one is not functioning?

When an app is downloaded with one apple id and needs update later on then how to change apple id on app store for updting that app???

You can't. All apps are forever tied to the Apple ID used to obtain them, and cannot be updated using any other ID.

HT1338 i couldn't update 10.8.1 to 10.8.2. The AppStore.app couldn't find the updates about Mo...Lion. Just iPhoto, but iPhoto couldn't update too, because it depends on osx 10.8.2!!!

i couldn't update 10.8.1 to 10.8.2.
The AppStore.app couldn't find the updates about Mo...Lion. Just iPhoto,
and iPhoto couldn't update too, because it depends on osx 10.8.2!!!

Do you have one of those newer Macs which require a special update? From other posts, it seems there are now three different OS versions/updates - each one of specific Macs.
I'd call Apple and give them your serial number as well as - important - your build number (click on the Apple and About this Mac; under Mac OS X, click on the numbers until you get to build .......)
Here are two that might be for your model:
http://support.apple.com/kb/DL1603
http://support.apple.com/kb/DL1611

Itunes said it needs update but its updated

i im goin to update my phone to ios7 when i connected to my computer it says itunes needs updated too but my itunes is all ready updated what do i need to do?

i have the exact same problem.

HT4623 Why on earth don't you tell people to back up contacts and photos before they update software? There was no mention of the need to back up until it was too late. I have lost hundreds of valuable phone numbers and photographs.

Why on earth don't you tell people to back up contacts and photos before they update software? There was no mention of the need to back up until it was too late. I have lost hundreds of valuable phone numbers and photographs.

The update process DOES back up contacts and photos, unless you interrupted the backup. The manual tells you to sync contacts to an app on your computer, and to import photos regularly to your computer. So Apple DID tell you to back up, you just didn't bother to read it.
If you didn't sync yet (and even if you did) connect the phone to your computer, right click on its name, and choose "Restore from Backup". If there's more than one backup choose the one with a timestamp before you updated.

I had iweb on my last computer - bought a new 2013 macbook pro a few months ago and it's gone. I have a webpage I build on it and now I need to get back in to update it. Help.

i had iweb on my last computer - bought a new 2013 macbook pro a few months ago and it's gone. I have a webpage I build on it and now I need to get back in to update it. Help.

Well of course you won't have iWeb on a new MacBook from this year. iWeb has not shipped on new Macs for a long time now and Apple has not sold iLife through its stores or online for over a year and does not support iWeb any longer.
If you want iWeb now, you will either need to purchase a new copy of iLife or try and find the old install discs from your old Mac and re-install iWeb from that disc. It also depends on what iWeb version you were using too - iWeb 08 or 09? If 08, then this is not compatible with Mavericks which will be running on a new Mac, so you'll need iWeb 09 for this. If you can find your old install discs and they are iWeb 09 then go ahead and use these, but if not, you will have to purchase the iLife 09 or 11 boxed set from Amazon and both of these contain iWeb 09 and you can then install it.
Also, when you set up your new Mac, did you migrate info over? If you had built a website on your old Mac, then you need to data file where all iWeb info is stored and that is called your domain.sites file and you need this file to be transferred if you want your website back again.
Can you get access to thhis file on your old Mac and transfer it? If you can then fine, you can access your website again, but if not, you are out of luck and you'll have to re-build your website from scratch using iWeb.
If you don't have iWeb, then now might be a good time to move forward and look at the many alternatives that are out there such as RapidWeaver, Sandvox, and EverWeb which is billed as an iWeb replacement and is very much like iWeb, but with SEO and the ability to create drop down menus built in (check out http://www.everwebapp.com). Other alternatives also include Flux 4, Freeway Pro and Express and WebAcapella 4.
Have a look and most of these allow you to download free trials so you can try before you buy.

HT201328 Hello, I needed to do a hard reset on my iPhone 3GS and it's taking me too much time. It's taking almost 12 hours by now!!!! I did it by going to "Settings, General, Reset, Erase All Content and Settings", confirm it and then the iPhone turns

Hello,
I needed to do a hard reset on my iPhone 3GS and it's taking me too much time. It's taking almost 3 hours by now!!!!
I did it by going to "Settings, General, Reset, Erase All Content and Settings", confirm it and then the iPhone turns off, gets the screen black with only the animated circle going on. And it's been there since then.
Is this a symptom of something bad? Should I do the hard reset by another way?

Hello Ali Syed,
It sounds like your phone is stuck at the spinning gear icon on the screen after Erasing all Content and Settings on your device. I would start by resetting the device with this process:
To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
From: Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
If the issue persists you may need to put the phone into recovery mode, and then restore it with iTunes as a new device:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thank you for using Apple Support Communities.
Take care,
Sterling

Installer build wants Sound and Vibration Distribution but my vi dont need any

My vi contains some ordinary serial inputs, and an ordinary DAQ to read some 4-20mA, refer attached.
So I save a new project and build a exe with the vi, no problem, refer project files attached.
Then I start to build the installer by clicking on the below libraries to install. I think I click the right library right?
But lo! NI say i need Sound and Vibration Distribution, now where did that come from? My vi doesn't have sound and vibrations functions...
I click no, Labview don't build the installer.
I click yes, Labview kept on asking me where is the Sound and vibration library.
I bought a NI Developer suite, that expensive stuff costing around US$4000+. My software vendor told me I dont have the license for Sound and Vibration Distribution.
So what should I do? Did I click some wrong settings during installer build? Is there someway to bypass this problem? Advance thanks!
Solved!
Go to Solution.
Attachments:
all-instrumentasst 4aug.vi ‏177 KB
gmail.vi ‏16 KB
project config.zip ‏5 KB

pallen a écrit:
So if I understand the KB correctly; What may have happened with the OP is that a newer version of Max (or another dependency of DAQmx) was installed along with the Sound and Vibration Suite. So that now the "source" of those dependencies is indicated as residing within that Suite even though the software itself was not licensed/activated on that machine.
Something like that?
Hi,
Yes, but as the note said,you can solve this problem depending on the LV version you use. In LabVIEW versions 8.6 and later, the Installer Source Location field is not editable.
In order to update this property, you must uninstall the associated
software and reinstall with the installers in the desired location as Christan said.
For previous version, you have to copy the
entire contents of the Device Driver
CDs to your hard drive. Then next time you build your installer, change
the Installer Source Location in the Advanced Installers dialog box to the location where you copied the contents of the Device Driver CD.
Regards,
Steve M.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Vidéo-t'chats de l'été : présentations techniques et ingénieurs pour répondre à vos questions

I updated to latest version, but a threating msg interrupts my game and says I need to go to 17.1 version

I updated to 17.0 and in the middle of my games, it closes the game and says I need to upgrade to 17.1 and have a antivirus too. If I try to install, it gives me a threatening icom and it is from an unknown source. Is this from you guys or what? How do I get rid of it? Also I upgraded to latest abode 11.5 and it doesn't go any faster. Does this have something to do with the other problem and should I go back to 10.3, cause I know 11.3 doesn't work.
Thanks,
Jolene

Try the following:
'''Scan for Malware'''
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try some of the following programs to scan for malware:
* [http://www.malwarebytes.org/mbam.php MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://windows.microsoft.com/MSE Microsoft Security Essentials] (A good permanent anti-virus if you don't already have one)
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
'''Reset Firefox'''
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

I have a macbook pro, and am trying to update my software. I recently bought an iphone 5, and my software is to out of date to sync my phone with itunes. I currently am running 10.5.8 and I need to update to atleast 10.6.8. Just wondering if I need to pur

I have a macbook pro, and am trying to update my software. I recently bought an iphone 5, and my software is to out of date to sync my phone with itunes. I currently am running 10.5.8 and I need to update to atleast 10.6.8. Just wondering if I need to purchase it from apple or if there is an easy/free way to update it.

you need to purchase it: http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard. It is only on a disk, not in download form.

I am signed into the App Store on my iphone 4 and one of my apps need updating and my brother was signed into it but its like its locked to his Apple ID I have tried signing out and turning my phone off its just not working

I am signed into the App Store on my iphone 4 and one of my apps need updating and my brother is signed into it because I didn't have any credit to make an ID so he signed in so I could download apps but its like its locked to his Apple ID I have tried signing out and turning my phone off its just not working please help.

Apps are locked to the Apple ID that was used to download them. You will have to sign in as your brother in order to update it.

I have updated to itunes 10.5 and now it doesn't recognize our iphones and says we need a driver installer but then throws a notice saying an error occured. Anyone know anything about this? :)

I have updated to itunes 10.5 on my Mac computer and now it doesn't recognize my iphones and says i need to install a device driver but when i try to install it it throws up a notification saying an error occured and to contact the makers of my device 's suppot website. Anyone know?

Have you tried repairing your application from within the Control Panel?

Pix and Videos gone after update - need help please.

Hi all,
I upgraded to the new OS2 and loved it... no problems there. When I tried to connect and pull pictures off via my PC, I got a message Blackberry Desktop software could not connect. I tried it multiple times after restarting the Playbook but would not connect. It connected and advised I needed to upgrade my software which I did, but when I started the Playbook after the install it was like it was brandnew out of the box. Had to go through the tutorial and then I was shocked to find all my pictures and videos were gone. I don'r care about the videos but had some really important (to me at least) pictures I wanted off of it.
Sooooo.... any chance of recovering those or does the updates just "Blow" everything away? I will never use my Playbook to take any pictures or video of anything again and guess I learned a painful lesson.
Thanks for ANY input you might be able to provide.

Same thing happened to me. RIM <Inappropriate Content Removed>
this one up.

II have downloaded several Apps that state they work with iTouch but they will not install and give error message that I need updated software, while all my updates available are installed on both iTouch and my computer iTunesWhy will Mindtools app not

My iPod Touch will not function with certain updated apps ie MindTools, YP.com, Mint, Ymessenger etc and I get the error message that I need to install updated software to load these apps to my iPod Touch; however, I have double checked and all the software updates have been loaded in obht the iPod touch and my computer. There are no updates availabe; yet the error message on App is a software update is required for App. "was not installed because it requires a newer version of iPod software."
The iPod Touch is using 3.1.3 software and it tells me that is the current and updated software version.

You are correct in that your 1G iPod Touch has all the latest software updates. It can only be updated to version 3.1.
However that Apps you are trying to download and install likely require iOS version 4.0 or later, which is not compatible with your iPod Touch. So either you'll need to buy a newer iPod Touch or find other Apps that are suitable replacements if possible.
Sorry.
B-rock

Gyroscope and Vibration ANE need update too

Similar Messages

Maybe you are looking for