H.245 Socket Error

Hello
Im often get the following error in the CDR_log:
Participant "No" (<<IP>>) left the conference
Disconnect reason "H.245 socket error"; Time in conference <Time> ; Participant called in; Protocol "H.323"; Media encryption status "encrypted"
Any Ideas how i can handle this Problem?
Are  there any Options/ tools to check where the Problem occurs?
Is this a Problem of an endpoint, or network, system- MCU etc.?
Somtimes i got this error from external endpoints which are connecting to our mcu
Thanks in advance
BR
Alex

Hello
I set the VCSE on log level 3, now im getting a H.225 Error. I ll post the last Logentires from the VCSE.
May 29 13:35:35
tvcs: Event="Call Disconnected" Service="H323" Src-ip="Endpoint A IP" Src-port="11010" Src-alias-type="H323" Src-alias="Endpoint A" Src-alias-type="E164" Src-alias="114312" Dst-alias-type="H323" Dst-alias="
DST-Alias" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="1" UTCTime="2013-05-29 11:35:35,755"
May 29 13:35:30
tvcs: Event="Message Received" Service="H.225" Message-type="DRQ" Src-ip="Endpoint A IP" Src-port="1719" Dst-ip="VCSE_IP_A" Dst-port="1719" Call-serial-number="SN" Tag="TAG" Protocol="UDP" Level="2" UTCTime="2013-05-29 11:35:30,767"
May 29 13:35:28
tvcs: Event="Message Sent" Service="H.245" Message-type="EndSessionCommand" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,770"
May 29 13:35:28
tvcs: Event="Message Received" Service="H.245" Message-type="EndSessionCommand" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,770"
May 29 13:35:28
tvcs: Event="Message Sent" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Detail="LCN:3" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,486"
May 29 13:35:28
tvcs: Event="Message Received" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Detail="LCN:3" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,486"
May 29 13:35:28
tvcs: Event="Message Sent" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Detail="LCN:2" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,485"
May 29 13:35:28
tvcs: Event="Message Received" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Detail="LCN:2" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,485"
May 29 13:35:28
tvcs: Event="Message Sent" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Detail="LCN:1" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,479"
May 29 13:35:28
tvcs: Event="Message Received" Service="H.245" Message-type="CloseLogicalChannelRequest" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Detail="LCN:1" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:28,479"
May 29 13:35:23
tvcs: Event="Message Sent" Service="H.245" Message-type="KeepAlive" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:23,125"
May 29 13:35:03
tvcs: Event="Message Sent" Service="H.245" Message-type="RoundTripDelayRequest" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:03,475"
May 29 13:35:03
tvcs: Event="Message Received" Service="H.245" Message-type="RoundTripDelayRequest" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:03,475"
May 29 13:35:03
tvcs: Event="Message Sent" Service="H.245" Message-type="KeepAlive" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:35:03,124"
May 29 13:34:43
tvcs: Event="Message Sent" Service="H.245" Message-type="KeepAlive" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:34:43,124"
May 29 13:34:37
tvcs: Event="Message Sent" Service="H.245" Message-type="MiscellaneousCommand" Src-ip="VCSE_IP_A" Src-port="15341" Dst-ip="VCSE_IP_B" Dst-port="2776" Call-serial-number="SN" Tag="TAG" Detail="VIDEO_FAST_UPDATE_PICTURE" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:34:37,275"
May 29 13:34:37
tvcs: Event="Message Received" Service="H.245" Message-type="MiscellaneousCommand" Src-ip="Endpoint A IP" Src-port="11011" Dst-ip="VCSE_IP_A" Dst-port="15340" Call-serial-number="SN" Tag="TAG" Detail="VIDEO_FAST_UPDATE_PICTURE" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:34:37,275"
May 29 13:34:33
tvcs: Event="Message Sent" Service="H.245" Message-type="RoundTripDelayResponse" Src-ip="VCSE_IP_A" Src-port="15340" Dst-ip="Endpoint A IP" Dst-port="11011" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:34:33,480"
May 29 13:34:33
tvcs: Event="Message Received" Service="H.245" Message-type="RoundTripDelayResponse" Src-ip="VCSE_IP_B" Src-port="2776" Dst-ip="VCSE_IP_A" Dst-port="15341" Call-serial-number="SN" Tag="TAG" Protocol="TCP" Level="3" UTCTime="2013-05-29 11:34:33,480"
The Log says that the Codec sent an "End Session Command" but the MCU says H.225 Socket Error.
Are there any Timeouts for Keep alive or something?
Thanks for Your Answer.

Similar Messages

  • When I try to log on to my ichat I get the error message "An undefined AIM socket error has occurred.". How do I resolve this?

    The error message "An undefined AIM socket error has occurred." comes up when I try and log on to ichat.

    I have the same issue. Does anybody know why this has happened

  • If I copy the "lcds" folder, Tomcat starts with socket errors

    In the documentation it is said that when you create a new server-side application, you can start by copying the 'webapps/lcds' folder. I did that but then, Tomcat starts with some socket errors:
    [LCDS]SocketServer 'my-rtmp-SocketServer' failed to pre-validate desired socket settings for BindSocketAddress: 0.0.0.0:2038
    java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
    [LCDS]SocketServer 'my-rtmp-SocketServer' failed to start.
    flex.messaging.LocalizedException: SocketServer 'my-rtmp-SocketServer' cannot bind to accept client connections on port '2038' because another process has already bound the port. Please ensure that multiple endpoints across all applications  are not configured to use this same port.
    Am I doing something wrong?
    Thanks,
    Borek

    What is happening is that you are getting a port conflict for the socket-based NIO and RTMP endpoints used in the channel definitions in the services-config.xml file of your new web app. The issue is that you have endpoints bound to the same port  in the LCDS web and in your new web app.
    You can deal with this one of two ways:
    Option 1: In that services-config.xml file, search on "RTMP" and "NIO" to find the channel definitions and change the port numbers to something slightly different than the ones used in the LCDS web app.
    Options 2: Move the LCDS web app out of the picture so it doesn't get loaded, and just use a template for future web apps. If you aren't using it for any of your development, there is really no reason you have to load it.
    I'll add a note about this to the documentation that talks about using the LCDS web app as a template.

  • Imap performance and socket errors

    -bash-3.00$ imsimta version
    Sun Java(tm) System Messaging Server 6.2-8.04 (built Feb 28 2007)
    libimta.so 6.2-8.04 (built 19:28:07, Feb 28 2007)
    SunOS vmpm1 5.10 Generic_141414-02 sun4u sparc SUNW,Sun-Fire-V490
    We're experiencing imap problems that appear to be load related, and have had to restart mail services several times to restore service. The imap logs show a large number of socket errors. The server load average is in the 1-2 range; there's no apparent memory resource problem. We're seeing 600-1000 simultaneous imap sessions, which is a higher number than in the past. We run JMS & Communications Express on dedicated V490 SPARC server with 8GB of memory. We're planning to add an additional 8GB this Friday.
    Our imap configuration settings are as follows:
    -bash-3.00$ configutil | grep service.imap
    service.imap.enable = 1
    service.imap.enablesslport = yes
    service.imap.idletimeout = 30
    service.imap.maxsessions = 4000
    service.imap.maxthreads = 250
    service.imap.numprocesses = 1
    service.imap.objectclass = top
    service.imap.plaintextmincipher = 0
    service.imap.port = 143
    service.imap.sslcachesize = 0
    service.imap.sslport = 993
    service.imap.sslusessl = yes
    Can you suggest additional troubleshooting steps? Do you recommend any configuration changes?
    Thanks.

    dpelinka wrote:
    Questions:
    1. Our JMS version info doesn't state whether it is 32 or 64-bit. Therefore, I assume we are running a 32-bit version. Is that correct?Correct. There is no 64-bit version of MS6.2.
    2. Is there a virtual memory limit on the 32-bit version of JMS 6.2? Is the limit greater for JMS 6.3?The Solaris OS imposes the virtual memory size limit of ~3.75GB for all 32bit processes on SPARC. 64-bit processes have a much much larger limit.
    http://developers.sun.com/solaris/articles/solaris_memory.html
    Regards,
    Shane.

  • Getting "Error Establishing Socket " error while running the application

    Hi,
    Can Any one help me as I getting the following error while inserting data into database for after some rows and will insert for some rows then again some error . I googled but but didnt get any proper solution.
    Soultion what I got it is
    1) turn off windows firewall.
    2) change server TCP/IP settings.
    3) It will give probelm with windows XP SP 2
    I tried all but didnt able to solve that.
    I am using Java 1.5, MSSQL server 2000,and eclipse 3.2,windows XP SP2
    java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
    at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
    at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
    at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
    at com.microsoft.jdbc.sqlserver.tds.TDSConnection.<init>(Unknown Source)
    at com.microsoft.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
    at com.microsoft.jdbc.base.BaseConnection.getNewImplConnection(Unknown Source)
    at com.microsoft.jdbc.base.BaseConnection.open(Unknown Source)
    at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
    at java.sql.DriverManager.getConnection(Unknown Source)
    at java.sql.DriverManager.getConnection(Unknown Source)
    at com.aztecsoft.quality.DatabaseConnectionQLTYSRV.getCon(DatabaseConnectionQLTYSRV.java:25)
    at com.aztecsoft.quality.DatabaseQuery.getDaytoCountRow(DatabaseQuery.java:147)
    at com.aztecsoft.quality.ProjectTrackerUtil.getNetworkDays(ProjectTrackerUtil.java:73)
    at com.aztecsoft.quality.ProjectPlan.calODurationinDays(ProjectPlan.java:81)
    at com.aztecsoft.quality.ProjectPlan.projectSummary(ProjectPlan.java:25)
    at com.aztecsoft.quality.ProjectPlan.main(ProjectPlan.java:126)
    Thanks in advance.

    Hi this is gopi,Hyd.Is your Problem "Getting "Error Establishing Socket " error while running the application" solved if so can you reply me i am waiting for this answer

  • The system cannot find the file specified.Windows sockets error code:2.

    Hi All,
      I am on MDM 5.5 SP6.
      I am getting the following error message when trying to logging in to the DM.
    The system cannot find the file specified.Windows sockets error code:2.This application will now exit.
    Runtime Error :
    Program C :\Program Files\SAP MDM 5.5\Data Manager\Datamanager.exe
    R6025.
    -Pure virtual function call.
    And in console also the MDM server is stopped after getting the above error message.
    Can anybody tell me what could be the problem?
    Thanks & Regards
    Sireesha.

    Hi Sireesha,
    According to me, there can be 3 problems,
    1. Kindly check whether the MDM server is stopped. If it is, then restart the MDM Server and Load the repository with Update indices.
    2. If this error is coming with every repository, the problem will be either in the Version mismatch of the Server and the GUI's you are using. Kindly ensure that the versions for the MDM server and the MDM Gui's Match.
    3. If only Data manager Client is giving the problem, then you can un-install and install the DM GUI again.
    Along with this, please refer to the link below :
    [[The system cannot find the file specified.Windows sockets error code:2.;]
    Hope it helps.
    Thanks and Regards
    Nitin jain

  • Unrecognized Windows Sockets Error: 0: JVM_Bind

    I'm not entirely sure if I compacted this well enough, but after class declaration and method calling, it is essentially what my program does.
    Server server = new Server(); // Creates a ServerSocket and binds it to a port.
    Client client = new Client(server.getSocketAddress());
    public Client(SocketAddress bind)
         try
              socket = new Socket();
              socket.bind(bind); // Problem here
              recieve = new Scanner(socket.getInputStream());
              send = new Formatter(socket.getOutputStream());
         catch (IOException e)
              e.printStackTrace();
    }Running the above code produces the following exception.
    java.net.SocketException: Unrecognized Windows Sockets error: 0: JVM_Bind
         at java.net.PlainSocketImpl.socketBind(Native Method)
         at java.net.PlainSocketImpl.bind(Unknown Source)
         at java.net.Socket.bind(Unknown Source)
         at GameObjects.PlayArea$Client.<init>(PlayArea.java:318)
         at GameObjects.PlayArea.<init>(PlayArea.java:48)
         at MenuStates.GamePlayState.initializePlayArea(GamePlayState.java:90)
         at MenuStates.CreateGameState.mouseClicked(CreateGameState.java:106)
         at Manager.GameManager.mouseClicked(GameManager.java:428)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Window.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Window.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)I don't even know what this exception is, and I can't find anything that will really tell me what is going on. Can anyone tell me what is happening here?
    I know that this question isn't directly related to Game Development, but I am using it in a game program, and I posted this question in the Network forum, and they flooded my topic with useless messages, and the only person who actually answered my question was extremely vague about it, even after I asked him to clarify. I am hoping that the good people of this forum will be more helpful.

    In some cases, the server socket used to need more time to be available. If you run several test, you need time to reuse the same port (for Windows 7). I could try the following code:
    Server server = new Server(); // Creates a ServerSocket and binds it to a port.
    Thread.sleep(500); // Waiting for server to be available
    Client client = new Client(server.getSocketAddress());
    public Client(SocketAddress bind)
         try
              socket = new Socket();
              socket.bind(bind); // Problem here
              recieve = new Scanner(socket.getInputStream());
              send = new Formatter(socket.getOutputStream());
              Thread.sleep(500); // Time to execute the sme port in another test.
         catch (IOException e)
              e.printStackTrace();
    }

  • Unrecognized Windows Sockets error: 10106: create

    Am getting the following error when I use tcp-mon to sniff the HTTP traffic. Same when I use SOAP-UI.
    I'm using windows 7 and using "jdk1.6.0_13". Any help on this pls .
    java.net.SocketException: Unrecognized Windows Sockets error: 10106: create
    at java.net.Socket.createImpl(Socket.java:388)
    at java.net.Socket.<init>(Socket.java:362)
    at java.net.Socket.<init>(Socket.java:180)
    at org.apache.ws.commons.tcpmon.SocketWaiter.halt(SocketWaiter.java:98)
    at org.apache.ws.commons.tcpmon.Listener.stop(Listener.java:543)
    at org.apache.ws.commons.tcpmon.SocketWaiter.run(SocketWaiter.java:87)

    Winsock error 10106. 8 seconds in Google. Looks like something wrong with your operating system installation.

  • Unrecognized Windows Sockets error...

    Hello everybody!
    I am encountering the following problem, when I try to run a program which wants to access the internet. I pasted an extract from the source code here, which I think includes the critical lines:
    import java.net.*;
    import java.io.*;
    class FindLinks {
    public static Vector findLinks (String address) throws Exception {
    URL u = new URL(address);
    InputStream ins = u.openStream();
    InputStreamReader isr = new InputStreamReader(ins);
    BufferedReader webPage = new BufferedReader(isr);
    When I run the complete program, I get the following message:
    Exception in thread "main" java.net.SocketException: Unrecognized Windows Sockets error: 10106: create
    at java.net.Socket.createImpl(Socket.java:313)
    at java.net.Socket.connect(Socket.java:424)
    at java.net.Socket.connect(Socket.java:376)
    at sun.net.NetworkClient.doConnect(NetworkClient.java:139)
    at sun.net.www.http.HttpClient.openServer(HttpClient.java:386)
    at sun.net.www.http.HttpClient.openServer(HttpClient.java:602)
    at sun.net.www.http.HttpClient.<init>(HttpClient.java:303)
    at sun.net.www.http.HttpClient.<init>(HttpClient.java:264)
    at sun.net.www.http.HttpClient.New(HttpClient.java:336)
    at sun.net.www.http.HttpClient.New(HttpClient.java:317)
    at sun.net.www.http.HttpClient.New(HttpClient.java:312)
    at sun.net.www.protocol.http.HttpURLConnection.plainConnect HttpURLConnection.java:481)
    at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:472)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:574)
    at java.net.URL.openStream(URL.java:960)
    at FindLinks.findLinks(FindLinks.java:10)
    at FindLinks.main(FindLinks.java:47)
    I am using the new Java SDK 1.41 on a Windows XP machine. Does anyone has an idea what might be causing this problem?
    Kind regards
    Linus

    I know, but you triple posted

  • Socket Error on Recieve

    Hi Experts.
    when i try to export repository schema (or) Export Change file from the console, it is displaying "Socket Error on Recieve" and i am unable to perform any kind of operation.
    I have repaired, refreshed, stoped and started repository and server, but i didn't get any progress on this.
    Is any additional settings or operations need to perform at repository or MDM server level...?
    Can any one help me what would be the reason for this problem...?
    If this is a network issue, then what kind of things need to consider to resolve it..?
    Thanks
    Bharat

    HI Bharat,
    This is more to do with MDM server to Data base connectivity.
    I think restarting the server can solve your problem,if it does not then check if the same problem exists for other repositories also.Also,check the MDS log file entry.
    Thanks,
    Ravi

  • IP SLA UDP-ECHO socket error

    have this configuration on ASR1002F router. Trying to setup IP Sla so that we can monitor the delay on WAN interfaces. Would like to send UDP-ECHO from one router to another across the WAN.   I need to send and receive on fixed port numbers. Keep getting socket errors.  any ideas on what i need to do?
    no ip sla 5
    ip sla 5
    udp-echo <dest ip> 65000 source-port 65000 control disable
    frequency 5
    ip sla schedule 5 life forever start-time now
    exit

    Was there a "source-ip xx.xx.xx.xx" portion on the "udp-echo 65000 source-port 65000 control disable" line?

  • No more data to read from socket error.

    Oracle Version
    SQL> select * from v$version;
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
    PL/SQL Release 11.2.0.2.0 - Production
    CORE    11.2.0.2.0      Production
    TNS for Linux: Version 11.2.0.2.0 - Production
    NLSRTL Version 11.2.0.2.0 - ProductionI am trying a code like below
    MERGE INTO TABLE1
    ( SELECT  ...
    FROM VIEW1 ) a UNPIVOT ("VALS" FOR cols IN ( .....columns to unpivot.......))
    where a.column1='test'
    ) b ON ( a.id=b.id)
    WHEN MATCHED THEN
    UPDATE set a.name=b.name
    when not matched then
    insert (a.id,a.name) values ( b.id,b.name);This code is giving error : No more data to read from socket error.
    But when I am trying
    MERGE INTO TABLE1
    ( SELECT  ...
    FROM VIEW1*
    where a.column1='test' ) a UNPIVOT ("VALS" FOR cols IN ( .....columns to unpivot.......))
    ) b ON ( a.id=b.id)
    WHEN MATCHED THEN
    UPDATE set a.name=b.name
    when not matched then
    insert (a.id,a.name) values ( b.id,b.name);It's working properly.
    Any idea why I am getting error with code 1?
    Edited by: Anupam_Halder on Oct 4, 2012 2:13 PM

    You need to look for an Oracle specific error code and message. The error text you have posted does not seem to be an Oracle error.
    The error however could result from an ORA-3113 end-of-file on communication channel.
    This Oracle error means that the Oracle server process servicing your request (executing SQL or PL/SQL code) ran into a fatal error (potentially an Oracle bug). The server process then proceeds with a "crash dump" - writes an error to the database instance's alert log, writes a trace file and then terminiates abnormally.
    It terminates without telling the client and without tearing down the tcp client-server connection. When the client then attempts to use this connection, the socket read fails. No data to read as the socket connection no longer exists.
    But this is speculation - we need to see the actual Oracle error (from the server or from the client driver). And you seem to be using an Oracle client that suppresses Oracle error codes and text. Which places a serious question mark over the actual usability of such client s/w for Oracle client-server.

  • [AGENT] socket error: [object XrayWrapper [object Event]]; readyState=3. Perhaps Helper is not running on ws://127.0.0.1:14821/2 or is shutting down? console.error: onepassword:

    hi
    in terminal, i am seeing this message.
    [AGENT] socket error: [object XrayWrapper [object Event]]; readyState=3. Perhaps Helper is not running on ws://127.0.0.1:14821/2 or is shutting down?
    is something missing that should be running
    i dont understand this message
    thankyou

    solved. was a firefox addon called 1password
    solved by deleting the desktop version of hte app and reinstalling
    1password support was useless. didnt even know a piece of their own software.  suggested it was a ffox profile issue. red herring.

  • Primary target ip address responded with 421.4.4.2 connection dropped due to socket error

    Hi,
    I'm getting this error when attempting to send messages to a domain rcmoore.com. I'm unable to send or receive messages from this domain. And my exchange 2010 queue viewer gives me an error
    : 451.4.4.0 Primary target ip address responded with 421.4.4.2 connection dropped due to socket error " attempted failover to alternate host, but did not
    succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.
    Please help.
    Subin Suresh

    Hello Subin,
    Have you tried a telnet to port 25 of the sending domain from the Hub transport/edge (if edge is presented)? This is required a success send. If this is not an issue, try Unchecking of "Enable Domain Security" at the properties
    of the send connector and do a test
    Regards from Visit ExchangeOnline |
    Visit WindowsAdmin

  • Socket error on receive message on MDM 7.1 Console

    Greetings -
    This may be a simple question, but I couldn't find a solution, so here goes:
    I have a new install for MDM:
    OS: B.11.31 U ia64 (HP Unix)
    MDM: 7.1.0.5
    DB: Oracle 10.2.0.4
    MDM Console Client : 7.1.0.5.92
    I have MDM server and database on same server.  When I go to connect to the server
    and create a repository for the first time, I get the message "Socket error on receive".
    This happens when I go to set my DBMS Settngs as well ...
    I didn't see that on my Suse Linux 10 install. 
    I am looking at the logs, but I don't see what / why the initial call does not go through to the
    database to set up connection.  I have also put in fake SYSTEM / Password in the settings
    and I get the same message.  It seems that it doesn't get to the point where it authenticates
    to the database(??).
    I do have a core file.  If I do a 'strings' on the core file, it appears that there is a connection
    trying to happen.  In the nohup.out file, I see this:
    [[excerpt]]
    [[INFO]] <MDM/Servers/MDS/MDSCommon/XCSGlobalFunctions.cpp:410> "User authentication method: Repository"
    ConnectionAcceptor::ConnectionAcceptor(): bind() failed with errno=0x000000E2 'Address already in use'
    Trying again for 120 seconds
    [/excerpt]
    Though this could be a misleading message ...
    Few question:
    How can I determine how to trace / see how the Console is trying to connect to the
    MDM server / database?
    How can I figure out what address this is talking about?
    Is this just a vague error or should I be looking somewhere specific for troubleshooting?
    Please advise!
    Thanks!
    -s
    Edited by: Shaunn Johnson on Nov 12, 2010 9:20 PM

    Everyone -
    We have a solution, however, it introduces a lot of new things that will require some
    investigation.  Before I go to that level, let me tell you what we did to resolve:
    Recap:
    Our MDM installation is on a shared OS (HP Unix) environment.  It is not virtual.  In short,
    we have one large server and multiple application that have their own logical IP Addresses
    and hostnames.
    When trying to connect from the MDM console (laptop/workstation/etc), through the application
    (MDM server) to the database (on the HP Unix system) and create a repository, this is where we
    see the 'Socket on receive' error.
    Solution:
    As per SAP "Note 1264660 - MDM on HP-UX IA crash when used with Oracle 10.2.0.4 client",
    part of the problem is because of how Oracle binds to a specific socket.  By itself, that
    solution did not work.  This effects the server side, too.  The next steps to fix this were to:
    extract the SAP OCL10264.SAR files in the shared client directory (/oracle/client/10x_64/instantclient)
    backup the library files from the server-level area of Oracle (/oracle/<SID>/102_64/lib)
    stop Oracle, the listener and MDM
    copy the SAP OCI files (as noted in  1264660) to the /oracle/<SID>/102_64/lib directory also
    verify the Oracle environment variables
    restart all systems and services (Oracle, MDM, listener)
    Of course, your oracle library paths will vary.  Check your LD_LIBRARY_PATH for that location.
    We also learned that if we set the LD_LIBRARY_PATH environment variable to where the
    oracle client library files were (client side), things should work.  We did try that, but it did
    not work.  At least, we tried it once and started to test other things (including our solution).
    Feel free to try that option and update this thread.
    Our solution was to copy those files directly into our server path and try again.
    Thanks to everyone who took time to look at this!
    -s

Maybe you are looking for

  • Error message when ejecting nano 6th generation

    When attempting to eject my nano after syncing with itunes on a PC  running Windows 7, I keep getting the message that it cannot be ejected because the device is currently in use, even though task manager shows no running applications.  Has anyone ha

  • Time Capsule Impacting email????

    I am having this problem with my iMac, an old iBook, and a MacBook Pro...started a few weeks ago. I have three different email accounts in the house (2 comcast and .me). The iMac and the iBook use Entourage and the MacBook uses MAIL. We had no proble

  • Equivalent of SYSDATE function in SAP MDX

    For scheduling a web intelligence report, we will have to build a logic in the report or universe to automatically refresh the report for last week or last month or last year as per the requirement. For this, is any one aware of an  MDX function equi

  • Querry in Assembly Processing

    Hi, I have created standard WBS E-9818.Using this WBS, I have created standard Network E-9818.Then I have created material M-9818 & made assignment in CN08. After this when I try to create sales order using order type PS1, it is not creating sales or

  • Downtime Management Notification Users in Satellite Systems

    Hi folks, I'm starting to set up Solution Manager Downtime Management. It's kind of cumbersome but I realize it is new functionality and will get better over time. I'm trying to set up the notification users but when I select "Notification Settings"