H.264 export..no issues from my test

@Steven Gotz
I have tested H.264 export in CC2014 and found no apparent issues.

Have you also tested the unmultiplexed bluray profile *.m4v for import in Adobe Encore? (Encore has had problems with this m4v files some time ago and wanted to transcode them again...)

Similar Messages

Export import issue from higher version to lower version

Hi,
I have an export dump file which was taken from 11g database(11.2.0.2.0) and trying to import into lower version of the database 9i(9.2.0.6.0), unable to complete the process.
Two ways i have found and tested in my test db
1)TNS entry of 9i database has been put into 11g database
a)Export dump was successfuly taken from 11g db
b)Getting below error,while import into 9i database
IMP-00058: ORACLE error 6550 encountered
ORA-06550: line 1, column 33:
PLS-00302: component 'SET_NO_OUTLINES' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignoredIMP-00000: Import terminated unsuccessfully
2)TNS entry of 11g database put into 9i database version.
a)During export (trying to take exp dump from 11g db in 9i exp utility),getting below error
EXP-00008: ORACLE error 1455 encountered
ORA-01455: converting column overflows integer datatype
EXP-00000: Export terminated unsuccessfully
Kindly advice me to overcome from this issue.
Regards,
Faiz

mafaiz wrote:
Hi,
I have an export dump file which was taken from 11g database(11.2.0.2.0) and trying to import into lower version of the database 9i(9.2.0.6.0), unable to complete the process.
Two ways i have found and tested in my test db
1)TNS entry of 9i database has been put into 11g database
a)Export dump was successfuly taken from 11g db
b)Getting below error,while import into 9i database
IMP-00058: ORACLE error 6550 encountered
ORA-06550: line 1, column 33:
PLS-00302: component 'SET_NO_OUTLINES' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignoredIMP-00000: Import terminated unsuccessfully
2)TNS entry of 11g database put into 9i database version.
a)During export (trying to take exp dump from 11g db in 9i exp utility),getting below error
EXP-00008: ORACLE error 1455 encountered
ORA-01455: converting column overflows integer datatype
EXP-00000: Export terminated unsuccessfully
Kindly advice me to overcome from this issue.This has nothing to do with APEX. Post on the {forum:id=61} forum.

Export issues from LR5.3 to CS6

Since LR5.3 update I cannot export my Photos from lightroom to CS6 directly and the edit box iln LR doesn't appear anymore when performing this task?

Hi Geoff,
Many thanks for your tip. Indeed, moving the preference file to the desktop now solves the problem!
Would you mind explaining why this works? And what I need to do with the preference file sitting on my desktop?
So I can get a deeper understanding.
Many thanks again.
René

How to export a movie from Final Cut Pro X?

Hi There,
I've been away from FCP for a while using Premier but I have an FCPX project that I need to export a preview from.
I've tried "Sharing" a YouTube movie but it wants an account so I tried using "Apple Devices 1080p". But I get no dialogue to save it and no feedback that anything is happening - nor do I know where FCPX actually saved it (assuming it exported it).
I also tried adding a new sharing destination but none of the destination options make sense - rather I didn't see anything I wanted to share to (DVD, BluRay etc).
I'm currently downloading the PDF manual but this seems like such a basic thing to want to do that I'm pretty sure I'm missing something simple - so thought I'd post here.
Put simply, how do I export a preview file to my desktop?

Or just export an H.264, which PC's can play back just fine, especially via the web. I've never had issues with my clients.
http://www.macprovideo.com/hub/final-cut/preparing-video-web-quicktime-compresso r
You can do H.264 direcly out of FCP X without going to compressor. You'll need to purchase "Flip4Mac" to export WMV files, which I rarely have to use for my PC clients. You can create a Bundle in your Share preferences to do it all in one operation, too.

Import / Export Specific tables from DB

Hi,
I am trying to export all 'AD_' tables from my database from another database with their constraints.
I tried a command just for export one table from my cmd :
"exp adempiere/adempiere@simext15:1521/compiere2 file=emp.dmp tables=(AD_ACCESSLOG)"
it export fine but when try to import this file from using command
"imp adempiere/adempiere@simext15:1521/compiere2 file=emp.dmp fromuser=adempiere touser=adempiere tables=(AD_ACCESSLOG)"
it gives me so many errors:
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export file created by EXPORT:V11.01.00 via conventional path
import done in WE8MSWIN1252 character set and UTF8 NCHAR character set
. importing ADEMPIERE's objects into ADEMPIERE
. . importing table "AD_ACCESSLOG" 0 rows imported
IMP-00015: following statement failed because the object already exists:
"CREATE UNIQUE INDEX "AD_ACCESSLOG_KEY" ON "AD_ACCESSLOG" ("AD_ACCESSLOG_ID""
" ) PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 FREELISTS 1 FR"
"EELIST GROUPS 1 BUFFER_POOL DEFAULT) LOGGING"
IMP-00017: following statement failed with ORACLE error 2264:
"ALTER TABLE "AD_ACCESSLOG" ADD CONSTRAINT "AD_ACCESSLOG_KEY" PRIMARY KEY ("
""AD_ACCESSLOG_ID") USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(I"
"NITIAL 65536 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT) TABLESPACE "
""USERS" LOGGING ENABLE "
IMP-00003: ORACLE error 2264 encountered
ORA-02264: name already used by an existing constraint
IMP-00017: following statement failed with ORACLE error 2264:
"ALTER TABLE "AD_ACCESSLOG" ADD CONSTRAINT "ADTABLE_ADACCESLOG" FOREIGN KEY "
"("AD_TABLE_ID") REFERENCES "AD_TABLE" ("AD_TABLE_ID") ENABLE NOVALIDATE"
IMP-00003: ORACLE error 2264 encountered
ORA-02264: name already used by an existing constraint
IMP-00017: following statement failed with ORACLE error 2264:
"ALTER TABLE "AD_ACCESSLOG" ADD CONSTRAINT "ADCOLUMN_ADACCESSLOG" FOREIGN KE"
"Y ("AD_COLUMN_ID") REFERENCES "AD_COLUMN" ("AD_COLUMN_ID") ON DELETE CASCAD"
"E ENABLE NOVALIDATE"
IMP-00003: ORACLE error 2264 encountered
ORA-02264: name already used by an existing constraint
About to enable constraints...
IMP-00017: following statement failed with ORACLE error 2430:
"ALTER TABLE "AD_ACCESSLOG" ENABLE CONSTRAINT "ADTABLE_ADACCESLOG""
IMP-00017: following statement failed with ORACLE error 2430:
"ALTER TABLE "AD_ACCESSLOG" ENABLE CONSTRAINT "ADCOLUMN_ADACCESSLOG""
Import terminated successfully with warnings.
I tried a lot for this I just want to export and restore all 338 tables related to Application Dictionary from one database to another database with their constraints and data.
I tried also using datalink but it only copy the structure and data but not the constraints, I want all three should be copy in to another database.
I know their is dependency on a table to another table but i don't know exactly it..
tried it onces again i am able to do export and import tables but only primary key related to every table gets restore neither Unique key nor Foreign key , please help me out from this i can export and import with full table with data and its all constraints.
Please help me out from this problem, waiting for your valuable suggestions.
Regards,
Manu

ORA-02264: name already used by an existing constraint
The constraint is already exists with the same name. So drop that before issuing the import command.
And ,
1. Check if all tables get imported
2. If all tables get imported then create the constraints manually
3. If tables do not get imported then import tables manually by specifying their name in imp statement
Thanks

"View Journal Entry" line when "Export"shows 'Account Description' as TEST?

When use "Line Drill Down" of Journal Entry line from GL & click on "View Journal Entry" button. The Journal line that appear when "Export" shows 'Account Description' as TEST in the excel or csv file. This issue is happening in Production. Is there any setup thats bringing this 'Account Description' as TEST or Oracle is defaulting this 'TEST'? What is the reason for this?
It will be of great help if somebody explain this.
regards,
Sairam

Try the patch 9695800.
By
Vamsi

I am having trouble exporting closed captions from premiere cc 2014.

I am having trouble exporting closed captions from premiere cc 2014. I see them in the program monitor but after i export and try to playback in either quicktime or VLC i get to embedded captions. I eve tried the side car file and embedded with compressor and still nothing. Any help would be appreciated.
I only used compressor because i switched from final cut to adobe. easy fellas!

I have latest QT version, do i need to go back to 7? I have tried VLC also, i usually use that to check CC in mpeg files. I am exporting a QT H.264 for just testing purposes, I need a prores HQ, also this is SD so my sequences are set to 720x486.

H.264 export, randomly missing audio tracks

Came across a strange issue when exporting a 1080p timeline using the H.264 export option. The first export had some strange video flickering issue, but the audio was fine. So I re-exported and switched to CBR instead of 2 pass VBR. On the 2nd export, the footage looked fine but for some reason tracks 3 and 4 which contained background audio, were not in the exported file, just silence. The thing that concerns me is the only encoding option I changed was the bitrate, and going from VBR to CBR, everything else stayed the same in the 2 exports. I have no idea why Premiere would mysteriously drop 2 of my audio tracks. Has this happened to anyone else? This problem has happened to me before, both with the flickering and missing audio. I've tried the usual updating to current version of Premiere, clearing preferences, etc. and still running into this.

I work in Broadcasting and we use Quicktime HD 1080i h264 with no problems. Plus the file sizes are just amazing (Less than 100mg for a 30 seconds)

Access 2013 crashed when I export a table from the access

Hi!
Access 2013 always crashed when I export a table from the access to the Database Symfoware.
1、The conditions of the Access 2013 crashed are the follows.
1)Create a table in the Access 2013.
2)Using the ODBC driver of the Database Symfoware to export the table from the access to the Database Symfoware.
2、The Environments are the follows.
1)Access 2013 X64(Version:15.0.4420.1017)
2)Win2008R2 X64
3)Symfoware V11.1 X64
3、The Application log from the Win2008R2 are follows.
ログの名前: Application
ソース: Application Error
日付: 2014/04/18 16:21:06
イベント ID: 1000
タスクのカテゴリ: (100)
レベル: エラー
キーワード: クラシック
ユーザー: N/A
コンピューター: WIN-29UTU2AIK6J
説明:
障害が発生しているアプリケーション名: MSACCESS.EXE、バージョン: 15.0.4420.1017、タイムスタンプ: 0x50674523
障害が発生しているモジュール名: ACECORE.DLL、バージョン: 15.0.4420.1017、タイムスタンプ: 0x506742b7
例外コード: 0xc0000005
障害オフセット: 0x0000000000171f36
障害が発生しているプロセス ID: 0xb6c
障害が発生しているアプリケーションの開始時刻: 0x01cf5ad638668c5b
障害が発生しているアプリケーションパス: C:\Program Files\Microsoft Office\Office15\MSACCESS.EXE
障害が発生しているモジュールパス: C:\Program Files\Common Files\Microsoft Shared\OFFICE15\ACECORE.DLL
レポート ID: 00e87957-c6ca-11e3-ad2c-0050568d2ced
イベント XML:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-18T07:21:06.000000000Z" />
<EventRecordID>3442</EventRecordID>
<Channel>Application</Channel>
<Computer>WIN-29UTU2AIK6J</Computer>
<Security />
</System>
<EventData>
<Data>MSACCESS.EXE</Data>
<Data>15.0.4420.1017</Data>
<Data>50674523</Data>
<Data>ACECORE.DLL</Data>
<Data>15.0.4420.1017</Data>
<Data>506742b7</Data>
<Data>c0000005</Data>
<Data>0000000000171f36</Data>
<Data>b6c</Data>
<Data>01cf5ad638668c5b</Data>
<Data>C:\Program Files\Microsoft Office\Office15\MSACCESS.EXE</Data>
<Data>C:\Program Files\Common Files\Microsoft Shared\OFFICE15\ACECORE.DLL</Data>
<Data>00e87957-c6ca-11e3-ad2c-0050568d2ced</Data>
</EventData>
</Event>
4、When the access crashed,I got the dump file .Then I use the Windbg got some information from the dump files.
The detailes are follows.
FAULTING_IP:
+58872faf03d6dd84
00000000`00000000 ?? ???
EXCEPTION_RECORD: 00000000001723c0 -- (.exr 0x1723c0)
ExceptionAddress: 000007fee3951f36 (ACECORE+0x0000000000171f36)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 0000000000000000
Attempt to read from address 0000000000000000
FAULTING_THREAD: 00000000000010b8
DEFAULT_BUCKET_ID: WRONG_SYMBOLS
PROCESS_NAME: MSACCESS.EXE
ADDITIONAL_DEBUG_TEXT:
Use '!findthebuild' command to search for the target build information.
If the build information is available, run '!findthebuild -s ; .reload' to set symbol path and load symbols.
MODULE_NAME: ACECORE
FAULTING_MODULE: 0000000076eb0000 ntdll
DEBUG_FLR_IMAGE_TIMESTAMP: 506742b7
ERROR_CODE: (NTSTATUS) 0x80000003 - {
EXCEPTION_CODE: (NTSTATUS) 0x80000003 (2147483651) - {
MOD_LIST: <ANALYSIS/>
CONTEXT: 0000000000171ed0 -- (.cxr 0x171ed0)
rax=0000000001be3598 rbx=0000000000000000 rcx=01cf5d1b0f402a5c
rdx=0000000009cfad30 rsi=0000000006688ef0 rdi=0000000001be35d0
rip=000007fee3951f36 rsp=0000000000172490 rbp=00000000001727a0
r8=0000000009b409d0 r9=0000000006688ef0 r10=0000000000000000
r11=0000000000000246 r12=0000000000000000 r13=0000000001be19f0
r14=0000000009cfad30 r15=0000000000000000
iopl=0 nv up ei pl nz na po nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00010206
ACECORE+0x171f36:
000007fe`e3951f36 4d3927 cmp qword ptr [r15],r12 ds:00000000`00000000=????????????????
Resetting default scope
PRIMARY_PROBLEM_CLASS: WRONG_SYMBOLS
BUGCHECK_STR: APPLICATION_FAULT_WRONG_SYMBOLS
LAST_CONTROL_TRANSFER: from 000007fee395c095 to 000007fee3951f36
STACK_TEXT:
00000000`00172490 000007fe`e395c095 : ffffffff`ffffffff 00000000`00000000 00000000`01bddaa2 ffffffff`ffffffff : ACECORE+0x171f36
00000000`001727b0 000007fe`e388f8eb : 000007fe`e399dc10 000007fe`e399dc30 000007fe`e399dc50 00000000`000000f9 : ACECORE+0x17c095
00000000`00172b50 000007fe`e388f590 : 00000000`06688ef0 00000000`00000004 00000000`000000f9 00000000`00000000 : ACECORE+0xaf8eb
00000000`00172ba0 000007fe`e388f406 : 00000000`00000004 00000000`000000f9 00000000`11cb1130 00000000`000000f9 : ACECORE+0xaf590
00000000`00172c30 000007fe`e391aee7 : 00000000`00000000 00000000`00173198 00000000`06688ef0 00000000`11cb0998 : ACECORE+0xaf406
00000000`00172c70 000007fe`e3933a72 : 00000000`00400100 00000000`00000002 00000000`00000001 00000000`06688ef0 : ACECORE+0x13aee7
00000000`00172e50 000007fe`e384e5b1 : 00000000`00000000 00000000`11cb0020 00000000`06688ef0 00000000`00000001 : ACECORE+0x153a72
00000000`00172e90 000007fe`e38358d1 : 00000000`000007ff 00000000`06688ef0 00000000`01bd99f0 00000000`00000000 : ACECORE+0x6e5b1
00000000`00173280 000007fe`e38718eb : 00000000`000007ff 00000000`06688ef0 00000000`11cb0000 00000000`00000000 : ACECORE+0x558d1
00000000`00173340 00000001`3f3b0cd2 : 00000000`0a0945c0 00000000`000000fe 00000000`000007ff 00000000`00000000 : ACECORE+0x918eb
00000000`00173430 00000001`3f3b0b9b : 00000000`00173730 00000000`001741e0 00000000`065e5b00 00000000`00000100 : MSACCESS!CreateIExprSrvObj+0x16af32
00000000`00173630 00000001`3f3afcea : 00000000`00173730 00000000`00000000 00000000`00000000 00000000`065e5b00 : MSACCESS!CreateIExprSrvObj+0x16adfb
00000000`001736a0 00000001`3f983140 : 00000000`00174401 00000000`0a3235e0 00000000`0a319aa0 00000000`00179fc8 : MSACCESS!CreateIExprSrvObj+0x169f4a
00000000`00174290 00000001`3f3aabeb : 00000000`00000000 00000000`00000000 00000000`00179f38 00000000`00000000 : MSACCESS!FUniqueIndexTableFieldEx+0x26ab4
00000000`00174530 00000001`3f3a9670 : 00000000`001778e0 00000000`00179f38 00000000`00000031 00000000`00000000 : MSACCESS!CreateIExprSrvObj+0x164e4b
00000000`00177870 00000001`3f3a8c1b : 00000000`00000010 00000000`108c5990 003d0044`00570050 00000000`74ac3f69 : MSACCESS!CreateIExprSrvObj+0x1638d0
00000000`001779d0 00000001`3f5450df : 00000000`0a0945c0 00000000`0000009c 00000000`0a0945c0 00000000`00000000 : MSACCESS!CreateIExprSrvObj+0x162e7b
00000000`00179e30 00000001`3f64e915 : 00000000`43ed8000 00000000`00000000 00000000`3f800000 00000000`00000000 : MSACCESS!FillADT+0x5830b
00000000`0017c450 00000001`3f33b172 : 00000000`00000000 00000000`0006075e 00000000`0017e370 00000000`00000000 : MSACCESS!IdsComboFillOfActidIarg+0xaddf1
00000000`0017d730 00000001`3f33a9ef : 00000000`0017e0a0 00000000`00000b86 00000000`00000000 00000000`0fea0000 : MSACCESS!CreateIExprSrvObj+0xf53d2
00000000`0017d790 00000001`3f33a20c : 00000000`06620400 00000000`00000000 00000000`00000001 00000000`0017e420 : MSACCESS!CreateIExprSrvObj+0xf4c4f
00000000`0017e400 00000001`3f6019cd : 0071023b`007a000a 00000000`00374a30 00000000`00000005 00000000`0000000c : MSACCESS!CreateIExprSrvObj+0xf446c
00000000`0017e850 00000000`06706fd5 : e2504700`aa00ee81 00005d1b`0f2363ea 00000000`0017e9e0 00000001`3f200000 : MSACCESS!IdsComboFillOfActidIarg+0x60ea9
00000000`0017e8f0 00000000`0a30c378 : 00000000`00000000 00000000`00000008 00000000`067069ac 00000000`00000000 : 0x6706fd5
00000000`0017e960 00000000`00000000 : 00000000`00000008 00000000`067069ac 00000000`00000000 00000000`00000008 : 0xa30c378
FOLLOWUP_IP:
ACECORE+171f36
000007fe`e3951f36 4d3927 cmp qword ptr [r15],r12
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: ACECORE+171f36
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: ACECORE.DLL
STACK_COMMAND: .cxr 0x171ed0 ; kb
BUCKET_ID: WRONG_SYMBOLS
FAILURE_BUCKET_ID: WRONG_SYMBOLS_80000003_ACECORE.DLL!Unknown
WATSON_STAGEONE_URL: http://watson.microsoft.com/StageOne/MSACCESS_EXE/15_0_4420_1017/50674523/unknown/0_0_0_0/bbbbbbb4/80000003/00000000.htm?Retriage=1
Followup: MachineOwner
5、Where the access crashed I used the ODBC trace to get the trace log of the ODBC API.
The ODBC API called by Access before it crashed are the follows.
I also ansysised the log,and I did not find any Abnormal.
Test 1174-10f0
EXIT SQLGetData with return code 0 (SQL_SUCCESS)
HSTMT 0x0000000009F7C490
UWORD
6
SWORD
-8 <SQL_C_WCHAR>
PTR 0x00000000002C1F20 [
12] "LENGTH"
SQLLEN 62
SQLLEN * 0x00000000002C1E38 (12)
Test 1174-10f0
ENTER SQLGetData
HSTMT 0x0000000009F7C490
UWORD
10
SWORD
99 <SQL_C_DEFAULT>
PTR <unknown type>
SQLLEN 4
SQLLEN * 0x00000000002C1E38
Test 1174-10f0
EXIT SQLGetData with return code 0 (SQL_SUCCESS)
HSTMT 0x0000000009F7C490
UWORD
10
SWORD
99 <SQL_C_DEFAULT>
PTR <unknown type>
SQLLEN 4
SQLLEN * 0x00000000002C1E38 (-1)
Test 1174-10f0
ENTER SQLFetch
HSTMT 0x0000000009F7C490
Test 1174-10f0
EXIT SQLFetch with return code 100 (SQL_NO_DATA_FOUND)
HSTMT 0x0000000009F7C490
Test 1174-10f0
ENTER SQLFreeStmt
HSTMT 0x0000000009F7C490
UWORD
0 <SQL_CLOSE>
Test 1174-10f0
EXIT SQLFreeStmt with return code 0 (SQL_SUCCESS)
HSTMT 0x0000000009F7C490
UWORD
0 <SQL_CLOSE>
6、I also did the test with the Access 2010,and with the Sql Srever/Oracle.
The results are the follows.
1) With the Access 2010(X86 or X64) and Access 2013 X86,it successes when I export the table to the DB Symfoware.But only with the Access 2013 X64,the Access crashed.
2)With the Access 2010(X86 or X64) and Access 2013(X86 or X64),using the Sql Srever/Oracle,it always successes .
According to all the descrived above, I wonder if it a bug of the Access2013 .
Could anyone can help me ?
Thanks for any help.

George Zhao
Thank you for your help.
I have already install
the latest patches of the Office 2013.But it doesn't work.It is down also too. And ODBC
drive of Database Symfoware is the newest driver of the Database Symfoware. Now I wonder that
if it si a bug of the ODBC
drive of Database Symfoware,I should fix the bug,but I have analysised the odbc trace log and I do not find any wrongs ,so I think maybe it is a bug of the Access .
I have see many situations about the Access down on the internet .

Export to PDF from Infoview does not show correct data - CRS 2008

I have a problem where users attempt to export a report from the Infoview interface to a PDF. The report shows correctly in Infoview while in Crystal Reports format, but when the use exports the data, the data changes and shows different values. To troubleshoot, I have tried this on different clients - without a change in the result. I have also pulled the latest instance of the report from this history on the Central Management Console. Interestingly enough, the same thing happens when I export to a PDF from there as well. Any insight or help would be greatly appreciated. Thanks!

Hello,
I can't tell you offhand on what the issue is here, as various factors come into play.
Here are a few troubleshooting steps you can try:
- Try opening the report in Crystal Report designer and export to pdf from there. Does this work?
- Instead of viewing the report and export; schedule a report to PDF and check the results.
- there is currently a know issue in regards of certain formulas and using font type "arial Unicode MS" that gives incorrect export to pdf. Maybe alter the font used.. or see if you take out any questionable formulas and try again to export.
Regards,
Duncan

Is it possible to export a certificate from an iPhone?

Hi all,
We are distributing corporate iOS devices with an internally-issued certificate. The user can't use the VPN client without a proper certificate. One of our consultants has the infrastructure director all spun up with the idea that a user could export the certificate from the iPhone or iPad and transfer it to their personal device. As far as I know, this is not possible. Am I correct?
Any help or thoughts are appreciated.
Thanks,
- Steve

Macbook354 wrote:
Yeah, unless you want to deal with the pain of trying to get you messages to your computer, you will have to take a screenshot (by taping the home and lock button at the same time).
If you want to print a screenshot, it will be in the photos app to print ( click the share button and click print). If you so not have a AirPrint printer, there are third-party apps for computers like fingerprint (look it up) that can make a fake AirPrint printer.
I want to add something more.
In most cases, you would need to use a paid third party tool to export and then print your iPhone text messages on your computer. If you have a low amount of messages you want to print you can also take prints creens of each message, then transfer the photos to your computer and print from there. This and more methods of printing iPhone text messages here: How to Print Text Messages from iPhone?

Export is not exporting the data from Page. It always gets the data from VO

Hi,
I have got a critical issue, where I am Not able to export the current data from the page.
I have an export button and the VO is attached to it.
1) My page will execute the VO and I do some calculations to remove some rows, add the grand total etc.
2) The export button just re-executes the query and exports, which is not that, I want. I would like to export the current contents of the VO, which I manipulate and it is shown on the page.
To give an example -
My VO query is executed, when I click the Report button. I then adds Grand Total row to the VO and it gets displayed on the Page also.
Now, when I click the export button, it just exports the data which is coming from the VO SQL query, whereas I want the data from current state of VO i.e. with the grand total, which I added and is coming on the page also.
I will be really grateful, if someone can help me with this as it is really urgent.
Thanks for your help.
Shiju

Hi Shiju,
Is the export to csv opening fine with the data showing in individual columns when opening from internet explorer. What version of IE are you using? For us the export works fine from Firefox but does not work well in IE. From IE, the data shows with the commas in a single string. Appreciate your response as it will help us understand if our issue is local to our environment.
Thanks.

Getting an error while importing/exporting the universe from my BO Designer

Hi,
   I am facing a issue while importing/exporting the universe from my BO Designer to the Server.The error is mentioned below.
   'File Repository Server Input is down'
   Once I click the OK button on this error message, it displays the message
   'Could not import the Universe'.
I tried the check the status of the File Repository Server (Ouput and Input) and also the of the Root Directory on the Physical Server and also my machine.They all have read-write access.
Installed Version of the Universe Designer Client: Business Object XI Release 2 SP3
Installed Version of the BO Enterprise Server: Business Object XI Release 2 SP2
Can you please help me to resolve the issue

Hi,
   The step you have mentioned may not be applicable to my issue as one of my colleagues can import/export the universe from the same server
The second thing is that a DB2 Client v9 is installed on both mine and my colleagues system.The Designer software can recognise the DB2 drivers on his system but it cannot recognise the same drivers on my system.I even checked the versions of the BO software installed on his and my system and they are same.
The only difference is that his machine is a Windows XP Machine and mine is a Network Desktop.
Will any of the above two things will affect the operation of the BO Designer.
Thanks
Prabhakar Korada

Exporting PDF files from SSRS 2012 - "There was an error opening this document. The file is damaged and could not be repaired"

Good day
I have the situation where we are exporting PDF files from reporting services in our website.
When dividing the data into sections, the report exports perfectly, but when exporting the entire set and trying to open the file, we get the following error in Adobe Reader:
"There was an error opening this document. The file is damaged and could not be repaired"
We tried to repair the file, no luck. We tried to use different PDF readers, no luck
We then checked the file sizes. When exporting the subsections, each section exports a file of about 2mb.
When exporting the entire set, the file is about 1.3mb.
Adding all the sections together gives me a rough estimate of 40mb.
Exporting to TIFF works beautifully and returns a file of 41.5mb. Word and Excel formats also work well, only issue there is the page numbering and formatting.
The problem we have is the clients are adamant about having it in PDF format.
Any advice please?

This was one of the temporary suggestions I gave the client...
Unfortunately they do not like this as the page numbering and formatting in Word does not appear right. We are talking about over 1300 pages. I can't expect them to change the formatting with each export. Additionally, the data is
constantly changing and each client has their own data. The clients export the reports randomly. I therefore can't post the reports back onto the server.
Thanks for the speedy response though

I am new to EPUB fomat and I am facing a lot of difficulties in exporting my work from InDesign CS6

Hi..I am new to EPUB fomat and I am facing a lot of difficulties in exporting my work from InDesign CS6. The problem is that I have got a financial report of about 100pages to export as EPUB, with lots of graphs etc..and when I export it, to EPUB 2.0, the following happens:
1. The image quality is quite low (even if the original images are of high quality, and during export, i put the image to max quality)
2. The graphs do not appear where they should be! All the imags in fact appear after the long paragraphs of text..meaning everything appear quite messy and in an unordered manner.
I have read that images should be anchored, and doing so, the result is quite better, but still, some images appear at the end of the text!!d
That is, the end result, in terms of pagination and graphics, is no way like it should have been, compared to the indesign file (page 5 is displayed after page 10, image on page 4 appears on page 9 etc..)
PLEASE HELP..
P.S :
I am using Adobe digital edition to view my EPUB..I have also tried CALIBRE and SIGIL!! But I am not too sharp in eiting CSS codes etc...

Hi Akshay,
If you want your images to appear standalone with no other page item on the page, then you can insert Page break on an image.
This is how you can specify a page break:
1. Select the image
2. Goto Object->Object Export Options
3. Select EPUB and HTML tab
4. Select Custom Layout check box and then check Insert Page break. You can select from the option in the dropdown-Before Image, After Image, Before and After Image as per your requirement.
Regarding your question about images:
You export your graphs as JPEG but are those JPEGs of good resolution? If they are, then InDesign is doing something wrong during export but if the JPEGs are not of good quality then it is not an export issue. Please provide some more details here.
Regards,
Pooja

H.264 export..no issues from my test

Similar Messages

Maybe you are looking for