H.264 in Safari 6.0 displayed off centre

I've just upgraded my computer (Black MacBook, late 2006, Core 2 Duo) to Lion. After updating Safari to 6.0, H.264 videos are displayed off-centre. The frame will appear in the right location, but the actual content is displayed only in the top right corner. As a result, I can only see the bottom left corner of the video.
See the attached screenshot to see for yourself. It's taken from YouTube.
The same video in Flash container is played with no problem.
Anybody else is experiencing the same problem?
Thanks!
--ag

Never mind. I found that ClickToPlugin extension caused this problem. I had an older version (2.4) that didn't work well with Safari 6.0. Updating it to 2.7 solved the problem.

Similar Messages

  • Safari will not display pages

    I recently updated to Mountain Lion on my late 2010 MacBook Air.  Today, I attempted to use Safari and I can get no page to display.  Safari itself loads, but no pages will load.  I use Chrome as my default browser and only pull up Safari occasionally, so I can't say for sure that I have used Safari since the upgrade, however, I probably have.
    Today, I was invited to a Go To Meeting online meeting.  I opened the page in Chrome and it downloaded the GTM app.  I clicked on that and it tried unsuccessfully to download required files from it's server via it's own app.  I tried this several times without success and then thought to try the entire process using Safari.  That is when I discovered that Safari would not display pages.  It acts as if it has no connection to the internet.  Safari loads and the progress bar moves a little across the top then it just stops.  It never times out or complains; just nothing.
    Given that the GTM app looks also like it cannot connect to the internet, I went looking at some of the suspects.  My firewall is turned off.  My network status comes up clean when I test it. ...and more oddly, Chrome seems to have no problems with any and all pages.
    I searched for similar problems with solutions and one recommendation was to boot into safe mode to see if that made a difference.  I did that and there was no difference.  Since I don't use Safari routinely, it is stock, as delivered.
    Any ideas for how to troubleshoot this?
    Thanks,
    Bill

    Select  ▹ System Preferences ▹ Network ▹ Advanced ▹ Proxies. If any proxies are selected, deselect them, apply your changes, and try again. You must apply the changes before they take effect. You don’t need to change the other settings.

  • Safari will not display flash sites

    safari will not display flash sites?  Instead it will show a small box that says "flash" and once you click on it, it then displays the flash site!!
    Any ideas as to why this is happening?
    I am running .....
    Vendor: Oracle Corporation
    Version: Java SE 7 Update 25
    and
    Flash Player: 11.8.800.94

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

  • Safari will not display JPEGs

    Ever since I installed the 10.4.6 update when I open safari it will not show any JPEGs... This problem happened immideatley after I did the install. Any web page having jpeg files just show an empty space where ever ther should be a photo. If anyone has any ideas how to fix this problem I would appreciate the help. Now I am forced to use Explorer which still displays jepegs with no problem. Thanks to all

    Hi Yang,
    Thanks for the responce... I did the reinstall of 10.4.6. When I restarted my PowerBook after the instalation the white finder bar that runs arcoss the top of my display blinks on and off and my desktop will not load up... My dock appears so I was able to open Safari, which now displays JPEGs but how do I get my desktop back?
    A very worried, Dave
    Hi Dave,
    Try downloading and reapplying the 10.4.6 Combo
    Update. Related discussion threads: #1 and #2.
    Yang
    PowerBook 1.67GHz G4   Mac OS X (10.4.6)   2 Gigs ram

  • Safari has problems displaying WAY TOO MANY pages.

    For some time now, I've noticed that Safari simply cannot display certain pages. The first time I noticed this was on my MBP17 with a Snow Leopard (10.6.8) installation, using Safari 5.1.9. After a barage of Security Updates started creating a flurry of problems on this computer (including the Safari problem, as best I recall), I finally gave in and migrated (I can't really say upgraded) to Mountain Lion. It was my hope that this would cure the recent problems. It did not! After migrating to Mountain Lion (10.8.5) and Safari 6.0.5, I still see the same thing that I get on my MBP15 that remains on OS 10.6.8 and Safari 5.1.9.
    The problem I see is that Safari simply can't display certain pages. Many of them are on Apple's own website. For a while, I just thought Apple was creating pages with no content. It wasn't until I got to a page that had menus that wouldn't work (at all), that I decided to try the same page with Firefox. To my surprise, the page displayed perfectly on Firefox. I pasted the source code from pages displayed in both the Safari and Firefox into separate BBEdit documents and compared the source. It was absolutely identical! Presumably, therefore, the problem occurs with JavaScript modifications to the DOM. While it's easy to cut n' paste the DOM from Firefox, I've yet to find an easy way to do this with Safari's debugger. So, I can't tell exactly where the problem starts. Besides... Apple just doesn't pay me enough to debug their code for them!
    The follow screenshots show the results of the attempt to display http://www.apple.com/support/itunes/ in both browsers. (I was on this page trying to figure out a solution to the error message "an unknown error occurred (-42408)" that I keep getting in iTunes... a whole different can of worms!)
    As displayed in Safari (or as NOT displayed in Safari)...
    As displayed in Firefox...
    This problem crops up on many sites and is rather unpredictable. The thing that amazes me most is how often it occurs on Apple's own site! And since I see it on two different computers, with different OS and Safari installations, I can't possibly be the only one who sees this. I did just try it on my iPad 1 and the same page displays fine. Do I just need to go back to an even older OS version on my MBPs? Maybe OS 8?
    Anybody have an idea what might be going on? I have spent the entire past week debugging iOS7, iTunes, Safari and Mtn Lion. After over 34 years on Apple products, I'm just about ready to go buy a PC!! Maybe even a CPM box.
    PLEASE HELP!
    PS: Just to make it WORSE... I have tried to enter this several times and keep getting an error. I finally had to switch to Firefox and try again. What the HEXX has happened to Apple???

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

  • How do I clear redirects from Safari? I cleared Safari history but Safari continues to display the same message.

    How do I clear redirects from Safari? I cleared Safari history but Safari continues to display the same message.

    I have been to
    http://www.youronlinechoices.com
    you can turn off the company direction you to websites for advertising
    in my case AOL

  • Safari & chrome doesnt display web images

    safari & chrome doesnt display web images? ow should i solved this, i've done all necessary first aid like clearing all browsing data, cookies etc but still not working..  I am trying to access Ikea website specifically.

    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

  • My safari won't switch off - what can i do?

    i opened a page which should have allowed me to download a mock TOCFL exam (that's the standardized chinese exam in taiwan), but instead i just got a page of gibberish and since then skype won't let me close it, also while closing tabs there's no longer an x to click, instead i have to right click and then close it that way. anyone know what's going on here? also since safari won't switch off, i have no way of trying to deinstall and then reinstall it...any suggestions?

    Select  ▹ Force Quit... from the menu bar, then select Safari and press return. Do the same with Skype.
    Run Software Update and install all available updates.
    Reinstalling system components is rarely the solution to any problem, and certainly not to this one.

  • My safari is always shutting off  and then a box asking me to fill out a report pops up it happens at least once a day, is there anything i could do to stop this?

    my safari is always shutting off  and then a box asking me to fill out a report pops up it happens at least once a day, is there anything i could do to stop this?

    I think you mean it's crashing or quitting unexpectedly.
    Most likely due to third party Safari add ons. Follow the instructions for troubleshooting here > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    If you can't resolve the issue, post a crash report so we can try and help you get Safari going again.
    If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash  information.
    Copy/paste the entire contents of the Crash Reporter window into your reply. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

  • When streaming a movie from an imac to apple tv, is there a way of putting the imac display off? I find it a waste having the screen on in another room. Any advice?

    When streaming a movie from an imac to apple tv, is there a way of putting the imac display off? I find it a waste having the screen on in another room. Any advice?

    No problem.
    This is a user forum so you are not addressing Apple. There's nothing to fix, that's how home-sharing works. There would be no way for the ATV to recognize your library and display content if the computer is in sleep mode.
    You can always airplay from an IOS device or use icloud if you don't wish to keep the computer on.

  • On windows 7 machine, safari fails to display web sites

    on windows 7 machine, safari fails to display web sites

    what happens is you type in the url and press enter then nothing.  the fix was to run "netsh winsock reset"
    If the winsock key reset helped things, that usually indicates trouble with a LSP. (That's also consistent with a 'silent" Safari page-load failure.) If you run into the problem again, perhaps try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store

  • Safari will not display pdf files since installing OS 10.8.2

    Safari will not display pdf files uner Lion 10.8.2

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • My safari won't display home page

    My safari won't display my webpage.Just blank.But firefox is fine.Wonder why? I tried the reset on safari but it does nothing at all..Once my safari icon moved to the right all by itself to the right side of the dock.Why? Anyone.

    Safari: Mac OS & System Software: Apple Support Communities

  • Can I run two external displays off a MacBook?

    Hi there.
    I would like to run two external 20" Acer (VGA) displays off of my MacBook. I already use one 20" in addition to my MacBook screen but would like to have two full sized screens to work off and would not need the 13" from the MacBook.
    The MacBook literature says that only a second monitor is supported but I was hoping there is a way to override the MacBook screen in a two monitor setup and port the display to the third monitor.
    Any ideas ??

    You can have two independent external displays on the workstation macs such as G4, G5 and Mac Pros but not on apple laptops to the best of my knowledge. If you look on that page it shows the Mac Pro then underneath it is the image of two montiors side by side with the shark image going across it. Lower down is a Macbook Pro with one additional monitor next to it.
    This is the text which accompanies the image:
    "With an all PCI Express architecture, Mac Pro supports a lineup of state-of-the-art graphics cards to ensure a spectacular visual experience. Every Mac Pro supports two displays — including one 30-inch Apple Cinema HD Display — and can be expanded to drive an array of up to eight displays."
    Im assuming the up to eight displays refers to the fact that you can add extra graphics cards to the Mac Pro.

  • Internal display off when lid opened?

    Hey guys!
    Just installed Lion and one thing I immidiately noticed is the way Lion handles internal display when external display is plugged in. I use a big 24-inch display with my early 2011 MacBook Pro. I like to open the lid for better WiFi connection but dont really like the display to turn on. In Lion, it automatically does so I have two displays.
    Is it possible to open the lid but still keep the internal display off and only the external one on?
    Thanx!

    Support are quoting Apple's engineers as saying it is "expected behaviour" under Lion for the MBP's internal display to reactivate upon opening the lid, even if you want to use only your external display. A new version of the clamshell mode-related knowledgebase article (replacing HT3131) is due shortly confirming this.
    This is despite:
    - the obvious temperature-related benefits that were achievable (under Snow Leopard) by opening your MBP lid whilst continuing to output solely to, say, a 27" cinema display
    - the wifi connectivity benefits of having the lid open
    - the waste of energy and inefficient use of graphics processing power in needlessly running two active screens (ie if running your MBP in clamshell mode would otherwise make it too hot and/or noisy or you need it open for wifi)
    - the negative longer-term impact on the battery and other components from running the MBP any hotter than it needs to be.
    If you would like to have the previous behaviour restored, please lobby Apple to change how Lion handles clamshell mode. Options available to them include changing Lion's expected behaviour or adding a user-selectable option within System Preferences.
    Feedback can be submitted here:
    http://www.apple.com/feedback/macosx.html

Maybe you are looking for

  • I am unable to burn a playlist in iTunes 10

    I try to burn a playlist from iTunes10 I keep getting a media read error and the disk appears to be half burned. I can create a burn folder on my desktop and burn the cd with no problems. This problem started two updates ago. I have tried using an ex

  • Report model - number of values selected in DDL param

    Good afternoon, I have created a report model that references Teradata views, and I am using this model to populate several datasets in a Report Builder report.  One dataset returns actual results, and the other datasets are used to populate availabl

  • "Recovered Photos" error

    Every time I open iPhoto an error message comes up that says... "3 photos has been found in the iPhoto Library folder that were not imported. Would you like to import it?" Whether I hit "yes" or "no" the message goes away, then pops back up again, th

  • Write data  in  a file ?

    Hi , I have a question regarding writing data in a text file. I have a lot of classes which are having lot of println statements. Can we send data to a file which are coming from different classes. I need to update file in sequencial way which are co

  • Business rule LCM issue

    while importing business rule from QA to PROD using LCM we are facing issues..It doesn't import Business rule . we had to do it manually copy and paste the code and variables. then stop and start the services to make this rule effective..we are on 11