H.264 mov files from Canon 5D Mark II running at incorrect speed?

What is causing the mov. files recorded at 25 fps Imported from a Canon 5D Mark II
PAL to run at 2.5 fps on the Timeline of Premiere Pro ? And it looks like it.This all happened after the Firmware Upgrade 2.0.4
The camera is recording at the right speed according to the LCD and it runs correctly in Premiere Elements ?.
Message was edited by: Bob Dix

Interesting approach., Canon seem to think it might be the camera ? Which I
doubt because the mov H264 files are easily opened in Premiere Elements and
work very well., I am reluctant to send it back as I think the Problem is in
Premiere but, where ?
Regards,
Bob
AUSTRALIA
0746322996
Mobile 0405728925
0439186228
Ps . The problem is not fixed, Canon Australia is looking at the issue, the Canon EOS 5 D Mark II is recording at 25 fps. They believe the problem is within Adobe Premier Pro ? Perhaps even a computer problem any ideas.
Message was edited by: Bob Dix

Similar Messages

.mov file from Canon 5D Mark II file blurry in Timeline

Haven't use FC in quite a while, so I'm a bit rusty.
When I import a clip into FC, it looks fine in the Viewer, but when I move it into the timeline it looks blurry in the Canvas. It remains blurry even after rendering and even after exporting with no compression. The file is a .mov file from a Canon 5D Mark II. I tried exporting it from QT as a QT file with no compression, as well as just importing the uncompressed .mov file, but nothing works. I'm sure it's something simple.
Thanks for any help!
Message was edited by: Nancy Brown

Yes, I have the movie in Streamclip now, but am not sure what settings to use to export it and what codec to use.
_QT info -_
Format: H.264, 1920 x 1080, Millions
16-bit Integer (Little Endian),
Stereo (L R), 48.000 kHz
FPS: 29.97
Data Size: 342.35
Data Rate: 47.24 mbits/s
Normal Size 1920 x 1080 pixels
Current Size 1920 x 1080 pixels (Actual)

1080p30 .mov files from canon eos 5DMarkII in Final cut express 4.0.1

Hi everybody.
i need some help to import HD vidéo .mov files from Canon Eos 5DMarkII in final cut express.
The files is in 1080p30 (h264) like avchd but in the final cut configuration i have only 50i and 60i option in HDV and AVCHD
Final cut necessity to do a render (5h for 15min on my G5) and the movement quality is not the same.
Anybody have a idea to import Progressive files in final cut ?
maybe they have an update with new avchd 1080p codec in configuration ?
or i need final cut pro...?
Thanks in advance
and sorry for my english...i'm french

There is no good solution for working with this camera in FCE. It's 30fps progressive. There is no true video format that is 30fps. This is something Canon was cobbled together for this stills camera.
You can use MPEG Streamclip to convert the material to QuickTime using the Apple Intermediate Codec at 1920x1080. I think that's what it shoot. You should check the camera manual to confirm it shoots 1920 and not 1440.
The problem is the frame rate. You can convert it to 29.97fps or to 25fps. 25fps conforms to the European frame rate, but I don't know how well Streamclip will do this conversion. You also need to make sure the material is not interlaced by Streamclip.
The other problem is that FCE handles 1080 as an interlaced format, because for production it's supposed to be an interlaced format, at least in the formats, HDV and AVCHD, that FCE works with. You can set your sequence properties to have no field dominance, which should prevent it interlacing during compositing of any effects.

Must I use a converter program to import movie files from Canon powershot s95?

Must I use a converter program to import movie files from Canon powershot s95?

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
With Elements 11 you cannot.
The SX60 HS was first supported in Camera Raw 8.7 which is only compatible with Elements 13 and later.
Options:
Pay to upgrade to Elements 13
Free option: download the Adobe DNG converter, convert all SX60 HS Raw files to DNG format then edit the DNGs in Elements 11
Photoshop Help | Digital Negative (DNG)

.mov Files from Canon EOS 5D Mark II and Ipod Nano

I am looking at purchasing both these items with their promise to
deliver video files in the .mov format.
I am wondering whether anyone can confirm that is a 1-step transfer
into FCP, or is there fine print I need to read ? I understand going in
that the video quality of the Nano will be what it is, but wonder also
if anyone has experience with the video coming out of the Canon EOS 5D
Mark II ?
Thanks for any help,
Sterne

Let's get into a little more detail.
The moniker ".mov" doesn't really mean much. It means "a movie that QT can play back" - a very generic statement. Saying that a movie is a QuickTime movie is saying nothing of the underlying codec. You might have a hundred movie files with the ending ".mov" and they could all be using different codecs like: Motion Jpeg, DV, XDCam, DVCPro, DVCPro HD, H.264 and so on.... So to answer the question, "...Does the fact that it is already an .mov file make it more of a drag and drop thing?" The answer is, No. Here's why:
The 5D (and 7D) shoot a ".mov" file, yes. But specifically it's of the H.264 flavor. This is a burdensome codec. It's processor intensive. It's not meant for editing, it's meant for delivery. Furthermore, if there are going to be advances with it's native editability it's going to happen at the happen on hardware and software that are of the most current standards. And besides, that's still a big if.
There are no current machines that have true drag-drop-edit (without pain) the raw Canon .mov files. If you're thinking your current computer can't handle "hi-def footage" then it most certainly won't handle the (HD) camera native files. That doesn't mean you can't edit the footage. You'll just be back to what's been mentioned before: transcoding. You can always transcode to the highest quality codec that your Mac can handle and edit in that format. DVCPro HD? DV, at least! Don't know - whatever your machine can handle.
Summary: Native 5D camera files ---> FCP = painful, even with newest hardware/software. Rule is transcode. This is the only way people are efficiently working with this footage right now.
Footage Quality - it's quite nice! There's tons of video all over Vimeo with it now. It's a great concept that will only get better. Snoop around here too. There are tons of sample footage on the web. It is highly compressed though. All that info, and with tiny files, the information is going someplace! Being discarded. Learning to maximize an environment's given conditions will lead to minimizing the camera's inherent artifacts.
The next question to ask yourself is do you want this camera mostly for the HD movie mode or photography? The new 7D has some compromises compared to the 5D but has some things that the 5D doesn't, yet. Like framerates. The 5D is, for now, strictly 30P, while the 7D sports 24P, 25P 30P and 50P & 60P at 720P (instead of the full 1920x1200).
Hopefully that answers some questions regarding FCP dealing with the native camera files. Other than that: 5D or 7D? Both have some worthwhile merits to consider.

Having issues opening raw files from Canon 5D Mark iii in Photoshop CS5

I cannot open RAW files from a Canon 5D Mark III in Photoshop CS5. I get an error saying "
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information."
Documentation seems to be no help.
Any ideas?

You can download the updates manually and try to install them Adobe - Photoshop : For Macintosh
If you can not get CS5 updated you may want to consider Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Search Results
1 (800) 833-6687Adobe Systems, Customer service

Unable to open CR2 RAW file from canon 5D mark III

Installed cs6 which seemed to be working just fine until I attempted to open a CR2 file from a canon 5D Mark III, will not open, checked for RAW updates, nothing.

Hello, you will need to install Camera Raw 7.1 RC available in the labs: http://labs.adobe.com/technologies/cameraraw7-1/

Issues with .mov files from Canon 5d mk3 - since Mavericks upgrade...

Hello,
Ever since I upgraded my OS to Mavericks, Premier Pro has been refusing to 'see' .mov files in my projects. In the timeline the bits of .mov footage are appearing as red blocks, in the preview pane you get 'Awaiting media' then the red block of doom.
So currently I'm having to convert footage from .mov to mp4v - then it seems to be OK. The upgrading to Mavericks could be a coincidence ... but before that I had no issues with PP.
This is my system:
Processor 2.8 GHz Intel Core i5
OS X 10.9.1 (13B42)
Graphics ATI Radeon HD 5750 1024 MB
Memory 12 GB 1333 MHz DDR3
I would love some help/ideas on this - it's doing my head in having to convert .mov files, and having to back convert stuff in my existing projects ... please help!
Best - Abbottssnapper
[Text formatting corrected. Please type your posts into the browser, as copy/paste often leaves unwanted code.]
Message was edited by: Jim Simon

>Ever since I upgraded my OS to Mavericks
Adobe/Jive have a BAD title for the SEARCH THIS FORUM function
Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
maverick
or
mavericks
You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

.mov files from - Canon EOS 5D Mark ll - iPod Nano

I am looking at purchasing both these items with their promise to
deliver video files in the .mov format.
I am wondering whether anyone can confirm that is a 1-step transfer
into FCP, or is there fine print I need to read ? I understand going in
that the video quality of the Nano will be what it is, but wonder also
if anyone has experience with the video coming out of the Canon EOS 5D
Mark II ?
Thanks for any help,
Sterne

Did you accidentally post this twice? Double-posting is a bad idea.
I'll give you some quick answers in your other thread.

Unable to download Raw files from Canon 5D Mark III. [was:Blue flower]

When I download my raw images from my canon eos 5d mark 3 I get a blue flower and no image.
How do I fix this.

Which Adobe program?
Which version?

Are there issues with DNG Converter reading CR2 files from Canon 5D Mark III?

I am having problems similar to what's detailed at http://forums.adobe.com/message/4356184 (which unfortunately provides no explanation/solution) ... I choose the file where my CR2 RAW files are and try to convert but it tells me there are no files to convert. Only differences are I'm on Windows not a Mac, and I'm using Elements 9 not 10.

Let's continue to use that same forum thread for this conversation.

Can FCP recognize Canon EOS 550D H.264 mov files?

I had recorded some interesting fragments with my Canon EOS 550D and wanted to edit the vides before share with my friends. After downloaded the H.264 mov videos from Canon 550D to Mac hard disk, and imported them to FCP for editing, But the FCP can not recognize the files.I need some advices,Thanks.

Hi,
Theye are talking about FCP and editing Canon mov files in the following link:
http://vimeo.com/forums/topic:26416
The answer is still not really good but this may help. I don't use Canon cameras but the other.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT3825 How to view RAW from Canon 5D mark III for OS 10.6

To 'Preview' RAW files from Canon 5D mark III, it is known that you need to install the Digital Camera RAW Compatibility Update 3.12 , but it can only be used with iphoto 9, which in turn only work in OS 10.7, so there is no way for 10.6 users to 'Preview' the RAW files? Please help if you no any other ways, thank you!

Which Adobe program?
Which version?

I keep reading that i need converter software to import Canon DSLR (Mark II or D6) H.264 MOV file to iMovie? True? I'm confused.

I keep reading that i need converter software to import Canon DSLR (Mark II or D6) H.264 MOV file to iMovie? True? I'm confused.

iMovie 9.0.9 is the latest version you can run unless you upgrade to the Mavericks operating system (OS 10.9).
Your profile (at the bottom of your post) mentions OS 10.4.11 (Tiger) which is why I mentioned that.
The list of supported cameras is not comprehensive but articles such as:
https://getsatisfaction.com/apple/topics/make_canon_eos_6d_h_264_1080p_footage_e ditable_in_fcp_imovie
do indicate that conversion is needed before import, at least for iMovie 9. Although it's a recent article it doesn't specifically mention iMovie 10.
iMovie 10 has a very much changed interface and a different folder structure so upgrading is not trivial so I would not advise rushing into upgrading.
Maybe someone with knowledge of this camera can help.
Geoff.

I can no longer play quicktime mov files from a canon firestore

I can no longer play quicktime mov files from a canon firestore from an HDV camera that play on other macs and play in vlc. It happened all of a sudden. Files that I could play before no longer play. It seems to be something wrong with the quicktime codec management because the files do not play in premiere and final cut pro. In FCP it says: File Error: 1 File(s) recognized, 0 access denied, 1 unknown. These files work on other computers. I have four drives and it doesnt matter which file i attempt to open on each drive, these files are unreadable on this system. Please help. Possible issues might be a corrupted index, but i dont understand how that can go across four different drives.
Model Name:          Mac Pro
Model Identifier:          MacPro4,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.66 GHz
Number Of Processors:          1
Total Number Of Cores:          4
L2 Cache (per core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
4 SATA drives

Apple kindly updated Quicktime and rendered Firestore files unplayable. I think a recent update of iTunes was the culprit.
Solutions: What I did. Wipe the system disc. Re-install Snow Leopard. Re-install FCP7. Don't update Quicktime or iTunes to anything after Jun 2011. QT v7.6.6 is the last good version. That'll get your files back.
A colleague tried a different approach. For this you need a pre-July 2011 version of the file QuickTimeComponents.component. It is in the system/library/QuickTime folder. Delete your current one and drop in an old one.
However if you're working with Final Cut X, I think you screwed until Focus and Apple work something out. My address is on my contacts page at teevideousadotcom if you need any further help.

H.264 mov files from Canon 5D Mark II running at incorrect speed?

Similar Messages

Maybe you are looking for